ULTRASTRUCTURAL STUDY ON MICROSPORE WALL MORPHOGENESIS IN ISOETES JAPONICA (ISOETACEAE)

Spore wall morphogenesis of the microspore of Isoetes japonica was studied by transmission electron microscopy. The microspore wall consists of four layers: the perispore, outer exospore, inner exospore, and endospore. The perispore consists of electron-dense materials. The exospore is divided into outer and inner sections, with a large gap between the two. The outer exospore appears as an undulating plate consisting of tripartite lamellae with homogeneous sporopollenin. The inner exospore consists of an accumulation of tripartite lamellae on the microspore cell membrane. Immediately after meiosis, the tripartite lamellae of the outer exospore forms around the microspore. The lamellated inner exospore forms next, which adheres to the cell membrane of the microspore. The deposition of homogeneous sporopollenin material on the tripartite lamellae causes the plates of the outer exospore to thicken. Some homogeneous material may also be deposited on the inner exospore. Lastly, the electron-dense perispore is deposited on the outer exospore, and the electron-lucent endospore forms beneath the inner exospore. We conclude that the lamellae of the outer exospore, inner exospore, and endospore are formed and derived, in that order, from the gametophytic microspore cytoplasm. The homogeneous sporopollenin material of the outer exospore and perispore may be derived from the sporophytic tapetal cytoplasm.     

ULTRASTRUCTURAL STUDY ON SPORE WALL MORPHOGENESIS IN LYCOPODIUM CLAVATUM (LYCOPODIACEAE)

Spore wall morphogenesis of Lycopodium clavatum was observed by transmission electron microscopy. The spore plasma membrane indicates the reticulate spore sculpture shortly after meiosis. The mature spore wall of this species consists of two layers, inner endospore and outer exospore. There is no perispore in the sporoderm of this species. The exospore formation begins during the tetrad stage; and this layer is divided into two distinct sublayers, an outer lamellar layer and an inner granular layer. The lamellar layer is formed on the sculptured spore plasma membrane. Additional lamellae attach to this layer in a centripetal direction. For that reason, this layer may be derived from spore cytoplasm. The granular layer is formed only in the proximal region following lamellar layer formation, and it also may be derived from spore cytoplasm. The endospore is formed lastly and seems to be derived from spore cytoplasm as well. Accordingly, the spore sculpture of this species may be under the genetic control of the spore nucleus.     

Ultrastructural study of spore wall morphogenesis inOphioglossum thermale kom. var.nipponicum (Miyabe et Kudo) nishida

Spore wall morphogenesis ofOphioglossum thermale var.nipponicum was examined by transmission electron microscopy. The spore wall of this species consists of three layers: endospore, exospore, and perispore. The spore wall development begins at the tetrad stage. At first, the outer undulating lamellar layer of the exospore (Lo) is formed on the spore plasma membrane in advance of the inner accumulating lamellar layer (Li) of the exospore. Next, the homogeneous layer of the exospore (H) is deposited on the outer lamellar layer. Both lamellar layers may be derived from spore cytoplasm; and the homogeneous layer, from the tapetum. Then the endospore (EN) is formed. It may be derived from spore cytoplasm. The membranous perispore (PE), derived from the tapetum, covers the exospore surface as the final layer. Though the ornamentation of this species differs distinctly from that ofO. vulgatum, the results mentioned above are fundamentally in accordance with the data obtained fromO. vulgatum (Lugardon, 1971). Therefore, the pattern of spore wall morphogenesis appears to be very stable in the genusOphioglossum.     

Ultrastructure of developing basidiospores in <Emphasis Type="Italic">Rhizopogon roseolus</Emphasis> (= <Emphasis Type="Italic">R. rubescens</Emphasis>)

The ultrastructure of developing basidiospores in Rhizopogon roseolus is described. When viewed in the fruiting body chamber using scanning electron microscopy, basidiospores appear narrowly ellipsoid and have smooth walls. Eight basidiospores are usually produced on the apex of each sterigma on the basidium. Transmission electron micrographs showed that basidiospores formed by movement of cytoplasm (including the nuclei) via the sterigmata, and then each basidiospore eventually became separated from its sterigma by an electron-lucent septum. The sterigma and basidium subsequently collapsed, resulting in spore release. Freshly released spores retained the sterigmal appendage connected to the collapsed basidium. After spore release, the major ultrastructural changes in the spore concerned the lipid bodies and the spore wall. During maturation, lipid bodies formed and then expanded. Before release, the spore wall was homogeneous and electronlucent, but after release the spore wall comprised two distinct layers with electron-dense depositions at the inner wall, and the dense depositions formed an electron-dense third layer. The mature spore wall complex comprised at least four distinct layers: the outer electron-lucent thin double layers, the mottled electron-dense third layer, and the electron-lucent fourth layer in which electron-lucent granular substances were dispersed.     

瓦韦孢子壁的结构和发育的研究

利用光镜、扫描电镜和透射电镜对水龙骨科（Polypodiaceae）瓦韦(Lepisorus thunbergianus (Kaulf.) Ching)孢子壁的结构和发育进行了研究。研究结果表明瓦韦孢子两侧对称、单裂缝,表面具波纹状纹饰。孢壁从内到外由内壁、外壁和周壁三部分构成。外壁来源于绒毡层物质,由外壁内层和外壁外层构成,外壁外层表面的波纹状纹饰形成孢子表面的纹饰轮廓。周壁薄,紧贴外壁表面,由2层片状结构叠合而成。在外壁外层形成过程中,孢子表面和周围出现较多小球。本文探讨了孢壁各层的结构、来源和发育过程,为蕨类植物系统学和孢粉学研究积累资料。     

Fine Structure of a New Human Microsporidian, Encephalitozoon hellem, in Culture

Encephalitozoon hellem is a new human microsporidian isolated from corneal biopsies and conjunctival scrapings of three AIDS patients and cultured in Madin Darby canine kidney (MDCK) cells. Encephalitozoon hellem and Encephalitozoon cuniculi display different protein profiles with sodium dodecyl sulfate-polyacrylamide gel electrophoresis and unique antibody binding patterns with murine antisera against Western blots of each organism. Developmental stages of E. hellem in culture are similar to E. cuniculi. Meronts are 1.3–2.7 μm in diameter, develop within a parasitophorous vacuole adjacent to the vacuolar membrane, divide by binary fission, and contain one or two discrete nuclei. Sporonts measure 2 × 3 μm, separate from the vacuolar membrane, and have a thickened outer membrane. Sporoblasts display a tri-layered wall and possess the earliest recognized polar filaments. Mature spores measure 1 × 1.5 μm and are more electron-dense than other stages. Each spore contains a single nucleus, a polar tubule with four to nine coils, thin electron-dense exospore and thick, electron-lucent endospore. Although E. hellem and E. cuniculi differ biochemically and immunologically, their fine structure and development are indistinguishable.     

Ultrastructural studies of the mantle and the periostracal lamina in the manila clam, Ruditapes philippinarum

The four folds of the mantle and the periostracal lamina of R. philippinarum were studied using light, transmission and scanning electron microscopy to determine the histochemical and ultrastructural relationship existing between the mantle and the shell edge. The different cells lining the four folds, and in particular those of the periostracal groove, are described in relation to their secretions. The initial pellicle of the periostracum arises in the intercellular space between the basal cell and the first intermediate cell. In front of the third cell of the inner surface of the outer fold, the periostracal lamina is composed of two major layers; an outer electron-dense layer or periostracum and an inner electron-lucent fibrous layer or fibrous matrix. The role and the fate of these two layers differ; the outer layer will recover the external surface of the shell and the inner layer will contribute to shell growth.     

Crepidula beklemishevi gen. et sp. n. and Dimeiospora palustris gen. et sp. n. (Microspora: Amblyosporidae)--new microsporidian genera and species from blood-sucking mosquitoes (Diptera: Culicidae) from the south of the western Siberia

Microsporidia parasitizing the adipose body of mosquito larvae of Anopheles beklemishevi and Aedes punctor has been studied. Two new genera of microsporidia are described based on lightmicroscopic and ultrastructural characteristics of spores and sporogony stages. The spore wall of Crepidula beklemishevi gen. n. et sp. n. is formed by two-membrane exospore, thick exospore, bilayer endospore and thin plasmolemma. Spores with single nucleus, polar filament anisofilar, with 6-7 coils (2+ 4-5), polaroplast consisting of three parts: macrochelicoidal, microhelicoidal and lamellar. Fixed spores 4.2 +/- 0.22 x 2 +/- 0.01 microns. The sporogony of Dimeiospora palustris gen. et. n. results in spore formation of two different types. Spores of the first type are oviform, with thick wall, single-nuclear, 6.1 x 4.9 microns. Spore wall with three layers, about 370 nm. Exospore electron-dense, subexospore moderately electrondense. Exospore and subexospore irregularly pleated on the almost spore surface and slightly thinner on anterior end only. Endospore electron-translucent. Polar filament anisofilar, with 9 coils (3 + 6). Polaroplas consists of three parts: lamellar, fine bubbled, and coarse bubbled. Spores of the second type broad-ovate, with apical pole narrower, distal pole concave, 4.6 x 3.7 microns. Spore wall with three layer, 355 nm. Exospore on the apical end irregularly pleated, consists of thin electrondense exospore, subexospore of variable electron density, endospore electron-translucent. Polar filament anisofilar, with 13 coils (3 + 10). Polaroplast has two parts: lamellar and vesicular.     

红盖鳞毛蕨孢子发育的超微结构和细胞化学研究

采用透射电镜和细胞化学技术对红盖鳞毛蕨(Dryopteris erythrosora(Eaton)O.Ktze.)的孢子发育过程进行了研究,根据超微结构和细胞化学特征可将其孢子发育过程分为3个阶段:(1)孢子母细胞及其减数分裂阶段:孢子母细胞壳在孢原细胞末期开始形成,位于孢子母细胞及其减数分裂形成的四分体外侧,PAS反应显示其为多糖性质,与胼胝质壁为同功结构;在减数分裂形成的四分孢子之间产生孢子外壳,从功能、形成位置和时间上看与胼胝质壁相似,但苏丹黑B反应显示其可能含有脂类物质,与孢子母细胞壳和胼胝质壁不同。(2)孢子外壁形成阶段:外壁为乌毛蕨型(Blechnoidal-type),由薄的多糖性质的外壁内层和表面平滑的孢粉素外壁外层构成;小球参与外壁外层的形成,组织化学分析显示小球的中央区域和外壁外层内侧部分由红色(多糖)变为黄色,小球的表面区域和外壁外层部分始终被染成黑色(脂类),可知小球与外壁同步发育。(3)孢子周壁形成阶段:周壁为凹陷型(Cavate-type),包括2层,内层薄,紧贴外壁,外层隆起形成孢子脊状褶皱纹饰的轮廓,以少见的向心方向发育;苏丹黑B和PAS反应观察周壁被染成橙色,推测其可能由多糖等成分构成;孢子囊壁细胞参与周壁的形成。本研究为揭示蕨类植物孢子发生的细胞学机制提供了新资料。     

SPORE WALL FORMATION IN THE MYXOMYCETE PHYSARELLA OBLONGA

The spore wall of the myxomycete, Physarella oblonga, requires only 1 hr to develop. The spore wall surface ornamentations, the warts, are secreted first, followed by an outer electron-dense layer and an inner electron-lucent layer. A measurement analysis was conducted to determine if vesicles were involved in wall elaboration. By comparing spore plasmalemma length to the number of fused vesicles, a semi-quantitative analysis can be obtained. The determination reveals that very few vesicles are associated with wart and outer wall development. The greatest number of vesicles are associated with inner wall secretion. Plasmalemmasomes are most numerous during outer wall formation and Golgi bodies are observed only during inner wall elaboration. Other organelles do not seem directly involved in wall secretion.     

海金沙孢子壁结构和发育的研究

利用光镜、扫描电镜和透射电镜对海金沙科(Lygodiaceae)海金沙[Lygodium japonicum (Thunb.) Sw.]孢壁的形成和发育进行了研究.结果表明:海金沙孢子壁由内壁、外壁和周壁3部分构成.外壁由2层构成,即薄的内层和厚的外层,其中外层是在四分体分离前通过孢粉素的逐层沉积并浓缩凝聚而形成的均质层,其表面具不明显的疣状突起.周壁由绒毡层残余物在外壁表面逐层沉积形成,可分为周壁内层、周壁中层和周壁外层3部分;周壁中层具辐射状排列的长条形成分,周壁外层形成瘤状纹饰的轮廓.本研究为孢粉学和蕨类植物系统演化分析提供基础资料.     

Fine structure of a new human microsporidian, Encephalitozoon hellem, in culture

Encephalitozoon hellem is a new human microsporidian isolated from corneal biopsies and conjunctival scrapings of three AIDS patients and cultured in Madin Darby canine kidney (MDCK) cells. Encephalitozoon hellem and Encephalitozoon cuniculi display different protein profiles with sodium dodecyl sulfate-polyacrylamide gel electrophoresis and unique antibody binding patterns with murine antisera against Western blots of each organism. Developmental stages of E. hellem in culture are similar to E. cuniculi. Meronts are 1.3-2.7 microns in diameter, develop within a parasitophorous vacuole adjacent to the vacuolar membrane, divide by binary fission, and contain one or two discrete nuclei. Sporonts measure 2 x 3 microns, separate from the vacuolar membrane, and have a thickened outer membrane. Sporoblasts display a tri-layered wall and possess the earliest recognized polar filaments. Mature spores measure 1 x 1.5 microns and are more electron-dense than other stages. Each spore contains a single nucleus, a polar tubule with four to nine coils, thin electron-dense exospore and thick, electron-lucent endospore. Although E. hellem and E. cuniculi differ biochemically and immunologically, their fine structure and development are indistinguishable.     

乌蕨孢子壁的形成和发育

利用光镜、扫描电镜和透射电镜对鳞始蕨科（Lindsaeaceae）乌蕨（Stenoloma chusanum Ching）孢壁的形成和发育进行了研究。结果表明乌蕨孢子两侧对称、单裂缝,表面具疣状纹饰。孢壁由内壁、外壁和周壁三部分构成。外壁在四分体阶段已基本形成,其表面光滑,质地均匀,由孢粉素形成。周壁是由绒毡层残余物在外壁表面沉积形成,可分为周壁内层、周壁中层和周壁外层三部分。在周壁中层与外层之间有一层均匀的空间。最后,本文探讨了孢壁的形成和发育规律,研究结果对揭示孢子纹饰和孢壁各层的形成过程、来源和稳定性有重要的意义,并为孢粉学和系统学研究提供基础资料。     

Chemical and ultrastructural investigations of Mycobacterium bovis BCG: implications for the molecular structure of the mycobacterial cell envelope

Abstract The mycobacterial cell wall visualized by transmission electron microscopy (TEM) of thin sections of resin-embedded specimens is generally believed to consist of an electron-dense peptidoglycan, an electron-transparent arabinogalactan-mycolate layer and an electron-dense outer layer (OL). In addition, a pseudocapsule known as the ‘electron-transparent zone’ (ETZ) has been observed after phagocytosis of mycobacteria by macrophages. TEM of thin sections of Mycobacterium bovis BCG, Tice^® substrain, revealed an OL bilayer, each of which measured 2–4 nm in diameter. The intermediate electron-transparent layer varied from 1 to about 250 nm in diameter and appears to be a previously observed oxygen-dependent amorphous integument that consists of hot water-extractable neutral polysaccharides, especially a recently characterized α-glucan, comprising about 12% of the dry cell weight. This and other recent studies of BCG have revealed cell-surface features that may provide a better understanding of the outer mycobacterial cell envelope.     

Ultrastructure of spore development in <Emphasis Type="Italic">Scutellospora heterogama</Emphasis>

The ultrastructural detail of spore development in Scutellospora heterogama is described. Although the main ontogenetic events are similar to those described from light microscopy, the complexity of wall layering is greater when examined at an ultrastructural level. The basic concept of a rigid spore wall enclosing two inner, flexible walls still holds true, but there are additional zones within these three walls distinguishable using electron microscopy, including an inner layer that is involved in the formation of the germination shield. The spore wall has three layers rather than the two reported previously. An outer, thin ornamented layer and an inner, thicker layer are both derived from the hyphal wall and present at all stages of development. These layers differentiate into the outer spore layer visible at the light microscope level. A third inner layer unique to the spore develops during spore swelling and rapidly expands before contracting back to form the second wall layer visible by light microscopy. The two inner flexible walls also are more complex than light microscopy suggests. The close association with the inner flexible walls with germination shield formation consolidates the preferred use of the term ‘germinal walls’ for these structures. A thin electron-dense layer separates the two germinal walls and is the region in which the germination shield forms. The inner germinal wall develops at least two sub-layers, one of which has an appearance similar to that of the expanding layer of the outer spore wall. An electron-dense layer is formed on the inner surface of the inner germinal wall as the germination shield develops, and this forms the wall surrounding the germination shield as well as the germination tube. At maturity, the outer germinal wall develops a thin, striate layer within its substructure.     

Fine Structure of the Oocyst Wall of Eimeria nieschulzi

SYNOPSIS. Oocysts of Eimeria nieschulzi from the laboratory rat, Rattus, norvegicus , were studied by scanning and transmission electron microscopy. Oocysts had a rough outer wall with apparent random depressions. The oocyst wall is composed of 2 layers: an osmiophilic outer layer consisting of a rough external and smooth internal surface, and a relatively thick, electron-lucent inner layer. The outer layer is composed of a dense, coarsely granular matrix. The inner layer consists of homogeneous fine granular material interspersed with coarse osmiophilic granules and contains one closely applied membrane on the outermost surface. Several raised lenticular areas are seen on the coarse outer surface of the inner layer. These layers are 102 (75–128) and 176 (135–204) nm thick, respectively.
The sporocyst wall is thin, consisting of 3 to 4 unit membranes, and measures 27 (18–34) nm thick.     

乌蕨孢子壁的形成和发育

利用光镜、扫描电镜和透射电镜对鳞始蕨科(Lindsaeaceae) 乌蕨( Stenoloma chusanum Ching) 孢壁的形成和发育进行了研究。结果表明乌蕨孢子两侧对称、单裂缝, 表面具疣状纹饰。孢壁由内壁、外壁和周壁三部分构成。外壁在四分体阶段已基本形成, 其表面光滑, 质地均匀, 由孢粉素形成。周壁是由绒毡层残余物在外壁表面沉积形成, 可分为周壁内层、周壁中层和周壁外层三部分。在周壁中层与外层之间有一层均匀的空间。最后, 本文探讨了孢壁的形成和发育规律, 研究结果对揭示孢子纹饰和孢壁各层的形成过程、来源和稳定性有重要的意义, 并为孢粉学和系统学研究提供基础资料。     

Ultrastructure of the cell envelope and amino acid composition of the murein of Clostridium symbiosum

Abstract The cell envelope of the Gram-negative staining Clostridium symbiosum is 18 nm thick. It appears triple-layered and consists of an inner electrondense layer of about 5 nm, a lighter zone of 4 nm and an outer electron-dense layer of 9 nm. The inner layer corresponds to the murein sacculus, since the isolated peptidoglycan sacculi showed a thickness of 3–5 nm. Analysis showed that it belongs to the A₂pm-direct murein type. The outer layer could be removed by sodium dodecylsulfate. It contained mainly protein, small amounts of sugars and essentially no lipid, indicative of an S-layer rather than a typical Gram-negative type of outer membrane. Furthermore, l -alanine aminopeptidase activity characteristic of Gram-negative aerobic bacteria was absent in this organism and in other anaerobic Gram-negative bacteria tested. This demonstrates that such activity is an unreliable tool for the classification of anaerobic eubacteria. In spite of the thin murein layer, which is the likely reason for the Gram-negative reaction, the anaerobic growth, peritrichous flagellation and endospore formation indicate that this organism belongs to the genus Clostridium .     

Vavraia lutzomyiae n. sp. (Phylum Microspora) infecting the sandfly Lutzomyia longipalpis (Psychodidae, Phlebotominae), a vector of human visceral leishmaniasis

Vavraia lutzomyiae (Microsporida; Pleistophoridae) is a new species parasitic in the tropical phlebotomine sandfly, Lutzomyia longipalpis (Diptera, Psychodidae, Phlebotominae), a major vector of Leishmania chagasi in Latin America where human visceral leishmaniasis is endemic. Infected larvae and pupae were parasitized in the abdomen, and some adults were parasitized in Malpighian tubules and midgut. The sporogonial plasmodium divided by multiple divisions into up to 64 uninucleate sporoblasts. These stages were surrounded outside the plasmalemma by a thick, amorphous dense coat and transformed into a merontogenetic sporophorous vesicle within which the sporonts developed into sporoblasts. The mature microsporidian spores were broadly ellipsoidal and measured 6.1+/-0.43 x 3.1+/-0.15 microm. The spore wall consisted of a transparent endospore (approximately 100 nm) and a thin electron dense exospore (approximately 30 nm) with the outer limit slightly undulated. Spores contained a polar filament arranged peripherally in a single layer of eight to nine wide anterior coils (approximately 125 nm diameter), and three to four narrow posterior coils (approximately 70 nm diameter). Transverse sections revealed a concentric layer organization with the internal layer surrounded by numerous (up to 25) longitudinal microfibrils. The angle of tilt of the polar filament was about 65-68 degrees.     

Fine Structure of Zygotes and Oocysts of Eimeria nieschulzi*

SYNOPSIS. Mature macrogamonts were present in the small intestine of rats 5.5 to 7.5 days postinoculation with Eimeria nieschulzi oocysts; oocysts were present at 6 to 7.5 days. Types I and II wall-forming bodies in macrogamonts began to undergo ultrastructural changes within zygotes to form the outer and inner layers of the oocyst wall. Before and during oocyst wall formation a total of 5 membranes (M1–5) were formed at or near the surface of the zygote. The outer and inner oocyst wall layers formed between M2 and M3, and M4 and M5, respectively. The mature oocyst was loosely surrounded by M1 and M2, had an electron-dense outer layer, 100–275 nm thick, and an electron-lucent inner layer, 160–180 nm thick. It also contained an electron-lucent line consisting of M3 and M4 interposed between the outer and inner layers of the oocyst wall. The micropyle, measuring 935 × 47 nm, was located in the outer layer of the oocyst wall and consisted of 10–14 alternating layers of electron-dense and lucent material. The sporont of mature oocysts was covered by M5, immediately beneath which were M6 and M7. The sporont contained a nucleus and nucleolus, lipid and amylopectin bodies, mitochondria, ribosomes, as well as smooth and rough endoplasmic reticulum. Canaliculi, Golgi complexes, and types I and II wall-forming bodies were absent.