Bench-scale fermentation of Trichoderma viride on wastewater sludge: Rheology, lytic enzymes and biocontrol activity

Conidiation and lytic enzyme production by Trichoderma viride at different solids concentration of pre-treated municipal wastewater sludge was examined in a 15-L fermenter. The maximum conidia concentration (5.94 × 10⁷ CFU mL⁻¹ at 96 h) was obtained at 30 g L⁻¹ suspended solids. The maximum lytic enzyme activities were achieved around 12–30 h of fermentation. Bioassay against a fungal phytopathogen, Fusarium sp. showed maximum activity in the sample drawn around 96 h of fermentation at 30 g L⁻¹ suspended solids concentration. Entomotoxicity against spruce budworm larvae showed maximum value ≈17290 SBU μL⁻¹ at 30 g L⁻¹ suspended solids concentration at the end of fermentation (96 h). Plant bioassay showed dual action of T. viride, i.e., disease prevention and growth promotion. The rheological analyses of fermentation sludges showed the pseudoplastic behaviour. In order to maintain required dissolved oxygen concentration ≥30%, the agitation and aeration requirements significantly increased at 35 g L⁻¹ compared to 30 and 25 g L⁻¹. The oxygen uptake rate and volumetric oxygen mass transfer coefficient, k_La at 35 g L⁻¹ did not increase in comparison to 30 g L⁻¹ due to rheological complexity of the broth during fermentation. Thus, the successful fermentation operation of the biocontrol fungus T. viride is a rational indication of its potential for mass-scale production for agriculture and forest sector as a biocontrol agent.     

Ethanol production from cheese whey permeate by Kluyveromyces marxianus UFV-3: A flux analysis of oxido-reductive metabolism as a function of lactose concentration and oxygen levels

In order to investigate the effect of lactose concentration and oxygen level on the growth and metabolism of Kluyveromyces marxianus UFV-3 in cheese whey permeate, batch cultures were conducted under aerobic, hypoxic, and anoxic conditions, with lactose at initial concentration ranging from 1 to 240 g L⁻¹. The increase in lactose concentration increased ethanol yield and ethanol volumetric productivity, and has reduced cell yield. When lactose concentration was equal or above 50 g L⁻¹ and the oxygen levels were low, the ethanol yield was close to its theoretical value. Maximum ethanol concentrations attained in this study were 76 and 80 g L⁻¹ in hipoxia and anoxia, respectively. The lactose consumption rate in anoxia was greater than in aerobiosis and hipoxia. However, under anoxia, the lactose consumption rate of K. marxianus followed a saturation kinetics, which was not observed in hypoxia and aerobiosis. All oxygen levels investigated, showed a tendency for saturation of the ethanol production rate above 65 g L⁻¹ lactose. Ethanol production rate was also higher on anoxia.     

Biological phosphorus removal in sequencing batch reactor with single-stage oxic process

The performance of biological phosphorus removal (BPR) in a sequencing batch reactor (SBR) with single-stage oxic process was investigated using simulated municipal wastewater. The experimental results showed that BPR could be achieved in a SBR without anaerobic phase, which was conventionally considered as a key phase for BPR. Phosphorus (P) concentration 0.22–1.79 mg L⁻¹ in effluent can be obtained after 4 h aeration when P concentration in influent was about 15–20 mg L⁻¹, the dissolved oxygen (DO) was controlled at 3 ± 0.2 mg L⁻¹ during aerobic phase and pH was maintained 7 ± 0.1, which indicated the efficiencies of P removal were achieved 90% above. Experimental results also showed that P was mainly stored in the form of intracellular storage of polyphosphate (poly-P), and about 207.235 mg phosphates have been removed by the discharge of rich-phosphorus sludge for each SBR cycle. However, the energy storage poly-β-hydroxyalkanoates (PHA) was almost kept constant at a low level (5–6 mg L⁻¹) during the process. Those results showed that phosphate could be transformed to poly-P with single-stage oxic process without PHA accumulation, and BPR could be realized in net phosphate removal.     

Simultaneous production of anthocyanin and triterpenoids in suspension cultures of Perilla frutescens

When cultivated in Murashige & Skoog medium supplemented with 0.2 mg l⁻¹ 2,4-dichlorophenoxy acetic acid and 0.5 mg l⁻¹ 6-benzyladenine, Perilla frutescens cells in suspension culture grew rapidly reaching about 13.6 g dry wt l⁻¹ after 12 days. The cell line produced both anthocyanin 0.9 g l⁻¹ and triterpenoids: 16 mg l⁻¹ oleanolic acid (OA), 25 mg l⁻¹ ursolic acid (UA) and 14 mg l⁻¹ tormentic acid (TA). When P. frutescens cells of 7-day-old cultures were exposed to a yeast elicitor at 0.5–5% (v/v) for 7 days, it was found that anthocyanin content peaked at 10.2% of dry weight with yeast elicitor at 1% (v/v) whereas the maximum production of oleanolic acid and ursolic acid in cultures treated with 2% (v/v) yeast elicitor was 19 and 27 mg l⁻¹, a 46 and 24% increase over the control, respectively. This is the first report of simultaneous production of both anthocyanin and triterpenoids in a single culture system.     

Enhancement of growth and gymnodimine production by the marine dinoflagellate, Karenia selliformis

Because of its novel bioactive properties the production of gymnodimine for use as a pharmaceutical precursor has aroused interest. The dinoflagellate, Karenia selliformis produces gymnodimine when grown in bulk culture using GP + selenium medium but the growth rates (μ) and levels of gymnodimine are low (μ, 0.05 days⁻¹; gymnodimine 250 μg L⁻¹ max). We describe the effects of organic acid additions (acetate, glycolate, alanine and glutamate additions and combinations of these) in enhancing growth and gymnodimine production in axenic cultures. The most effective organic acid combinations in decreasing order were: glycolate/alanine > acetate > glycolate. Glycolate/alanine optimised gymnodimine production by prolonging growth (maximum cell yield, 1.76 × 10⁵ cells mL⁻¹; gymnodimine, 1260 μg L⁻¹; growth rate (μ), 0.2 days⁻¹) compared to the control (growth maximum cell yield, 7.8 × 10⁴ cells mL⁻¹; gymnodimine, 780 μg L⁻¹; μ, 0.17 days⁻¹). Acetate enhanced gymnodimine by stimulating growth rate (μ, 0.23 days⁻¹) and the large concentration of gymnodimine per cell (16 pg cell⁻¹ cf. 9.8 pg cell⁻¹ for the control) suggests a role for this compound in gymnodimine biosynthesis. Amending culture media with Mn²⁺ additions resulted in slightly decreased growth in control cultures and increased the gymnodimine while in glycolate/alanine cultures growth was stimulated but gymnodimine production decreased. The results suggest that the organic acid can enhance gymnodimine production by either enhancing growth maximum or the biosynthetic pathway.     

Cadmium biosorption on Spirulina platensis biomass

Dry biomass of Spirulina platensis re-hydrated for 48 h was employed as a biosorbent in tests of cadmium(II) removal from water. Various concentrations of biomass (from 1 to 4 g l⁻¹) and metal (from 100 to 800 mg l⁻¹) were tested. Low biomass levels (X_o  2 g l⁻¹) ensured metal removal up to 98% only at Cd₀= 100 and 200 mg l⁻¹, while X_o  2.0 g l⁻¹ were needed at Cd₀ = 400 mg l⁻¹ to achieve satisfactory results. Whereas X_o = 4.0 g l⁻¹ was effective to remove up to Cd₀ = 500 mg l⁻¹, a further increase in metal concentration (Cd₀ = 600 and 800 mg l⁻¹) led to progressive worsening of the system performance. At a given biomass levels, the kinetics of the process was better at low Cd²⁺ concentrations, while, raising the adsorbent level from 1.0 to 2.0 g l⁻¹ and then to 4.0 g l⁻¹, the rate constant of biosorption increased by about one order of magnitude in both cases and the adsorption capacity of the system progressively decreased from 357 to 149 mg g⁻¹.     

Kinetics of adsorption of Zn(II) ion on chitosan derivatives

The adsorption of Zn(II) ions from aqueous solution by chitosan derivatives (KCTS and HKCTS) was studied in a batch adsorption system. The adsorption capacities and rates of Zn(II) ions onto chitosan derivatives were evaluated. The adsorption isothermal data could be well interpreted by the Langmuir and Freundlich models. The kinetic experimental data properly correlated with the second-order kinetic model, which indicates that the chemical adsorption is the rate-limiting step. The apparent adsorption activation energy were 25.47 kJ mol⁻ and 5.473 kJ mol⁻, respectively, and the second-order adsorption constant for KCTS and HKCTS were 0.00311 g (mg min)⁻¹ and 0.005 g (mg min)⁻¹, respectively.     

Electrochemical quartz crystal impedance study on the overoxidation of polypyrrole-carbon nanotubes composite film for amperometric detection of dopamine

The electrochemical quartz crystal impedance (EQCI) method was used to study the overoxidation of polypyrrole (PPy)–multiwalled carbon nanotubes (MWCNT) nanocomposite film in neutral and alkaline solutions. The values of molar mass per electron transferred (M/n) obtained during the overoxidation of PPy in 0.10 mol L⁻¹ Na₂SO₄ and 0.20 mol L⁻¹ NaOH aqueous solutions were estimated to be ca. 17 and 22 g mol⁻¹, respectively, suggesting the nucleophilic attack of solution OH⁻ to the pyrrole units during the overoxidation, and the possible partial formation of carboxylic groups after the overoxidation in the NaOH solution. Also, the overoxidized PPy–MWCNT composite film prepared in the NaOH solution showed a notably larger affinity to dopamine (DA) dissolved in a neutral phosphate buffer than that prepared in the Na₂SO₄ solution. The modification of the overoxidized nanocomposite film improved substantially the sensitivity for DA assay in a neutral phosphate buffer, as compared with the modification of overoxidized PPy or MWCNT alone. At a −6 kHz (201-nm thickness) nanocomposite film prepared in a polymerization bath containing 1.0 mg mL⁻¹ MWCNT and overoxidized in 0.20 mol L⁻¹ aqueous NaOH, the peak current response from differential pulse voltammetric assay of DA was linear with DA concentration from 4.0 × 10⁻⁸ to 1.4 × 10⁻⁶ mol L⁻¹, with a lower limit of detection of 1.7 nmol L⁻¹, good anti-interferent ability, as well as good stability and reproducibility.     

Antimicrobial activity of steady-state cultures of Bacillus sp. CCMI 1051 against wood contaminant fungi

The effect of changing dilution rate (D) on Bacillus sp. CCMI 1051 at dilution rates between 0.1 and 0.55 h⁻¹ in a glucose-limited medium was studied. Biomass values varied between 0.88 and 1.1 g L⁻¹ at D values of 0.15–0.35 h⁻¹. Maximal biomass productivity was found to be 0.39 g L⁻¹ h⁻¹, obtained at D = 0.35 h⁻¹ and corresponding to a 54.4% conversion of the carbon into cell mass. The highest rate of glucose consumption was 4.45 mmol g⁻¹ h⁻¹ occurring at D = 0.4 h⁻¹. The glucose concentration inside the chemostat was below the detection level starting to accumulate around 0.4 h⁻¹. Growth inhibition of fifteen strains of fungi by the broth of the steady-state cell-free supernatants was assessed. Results showed that the relative inhibition differ among the target species but was not influenced by the dilution rate changing.     

Continuous production of green cells of Haematococcus pluvialis: Modeling of the irradiance effect

This paper presents a model for the continuous production of green cells of the microalga Haematococcus pluvialis, in both indoor and outdoor conditions. To develop this model, the influence of irradiance and dilution rate on the performance of continuous cultures of H. pluvialis was studied in the laboratory but simulating outdoor conditions. Characterization of the cultures included biomass productivity, fluorescence of chlorophylls, pigment content, elemental composition of the biomass, cell density, cell size, homogeneity and nitrate consumption rate. Results showed that the optimal dilution rate was 0.04 h⁻¹, and that higher external irradiance resulted in higher biomass productivity in all cases, with a maximum value of 0.58 g L⁻¹day⁻¹. Continuous cultures were stable for more than 3 months, in spite of photoinhibition at noon, producing homogeneous biomass with a stable biochemical composition and cell morphology at each steady state. Astaxanthin accumulation was not observed in spite of the high levels of irradiance essayed, and cells remained in the flagellated-palmeloids green form whatever the culture conditions. High dilution rates produced small cells of 22 μm diameter, with a high nitrogen content of up to 10.0% d.wt. The average irradiance within the reactor was the main factor determining the behaviour of the cultures, although the external irradiance impinging on the reactor surface also influenced the results, indicating the existence of photoinhibition. The influence of both external and average irradiance on the growth of H. pluvialis was modelized. The accuracy of the model obtained was verified on a 0.22 m³ outdoor tubular photobioreactor operated in both discontinuous and continuous mode, obtaining a maximum biomass productivity of 0.68 g L⁻¹day⁻¹. The model reproduced the experimental data of biomass concentration and productivity, cell size and nitrate consumption, providing to be a powerful tool for optimizing the design and operation of outdoor photobioreactors for the production of green cells of H. pluvialis.     

Aerobic chromate reduction by chromium-resistant bacteria isolated from serpentine soil

A group of 34 chromium-resistant bacteria were isolated from naturally occurring chromium percolated serpentine soil of Andaman (India). These isolates displayed different degrees of chromate reduction under aerobic conditions. One of the 34 isolates identified as Bacillus sphaericus was tolerant to 800 mg l⁻¹ Cr(VI) and reduced >80% Cr(VI) during growth. In Vogel Bonner broth, B. sphaericus cells (10¹⁰ cells ml⁻¹) reduced 62% of 20 mg l⁻¹ of Cr(VI) in 48 h with concomitant discoloring of yellow medium to white one. Reduction of chromate was pronounced by the addition of glucose and yeast extract as electron donors. In the presence of 4.0 g l⁻¹ of glucose, 20 mg l⁻¹ of Cr(VI) was reduced to 2.45 mg l⁻¹ after 96 h of incubation. Optimum pH and temperature for reduction were 6.0 and 25 °C, respectively. Increase in cell density and initial Cr(VI) concentration increased chromate reduction but was inhibited by metal ions like, Ni²⁺, Co²⁺, Cd²⁺ and Pb²⁺. Experiments with cell-free extracts indicated that the soluble fraction of the cell was responsible for aerobic reduction of Cr(VI) by this organism.     

Removal of lead (Pb(2+)) by the cyanobacterium Gloeocapsa sp

Pb²⁺ removal ability of the viable-freshwater cyanobacterium Gloeocapsa sp. was studied in batch experiments. Gloeocapsa sp. was cultured in the Medium 18 with pH adjusted to 3, 4, 5, 6 and 7. Growth was subsequently determined based on the increase of chlorophyll-a content. Gloeocapsa sp. was able to grow at all pH levels tested, except at pH 3. Removal of Pb²⁺ was then further studied under pH 4. The results showed that Pb²⁺ concentration in the range of 0–20 mg L⁻¹ was not inhibitory to Gloeocapsa sp. growth but reduced its Pb²⁺ removal efficiency (by 4.5% when Pb²⁺ concentration increased from 2.5 to 20 mg L⁻¹). Pb²⁺ removal characteristics followed the Langmuir adsorption isotherm with the maximum removal capacity (q_max) of 232.56 mg g⁻¹. Adsorption of Pb²⁺ by this cyanobacterium followed the second order rate reaction and intraparticle diffusion was likely the rate-determining step. The initial rate of Pb²⁺adsorption during intraparticle diffusion was slower under light than under dark conditions, indicating that light probably slowed down the initial rate of intraparticle diffusion through the repulsion effects on cell membrane.     

Carbon exchange and water use efficiency of a growing, irrigated olive orchard

We measured eddy covariance fluxes of CO₂ and H₂O over a flat irrigated olive orchard during growth, in different periods from Leaf Area Index (LAI) of 0.3–1.9; measurements of soil respiration were also collected. The daily net ecosystem exchange flux (F_NEE) was practically zero at LAI around 0.4 or when the orchard intercepted 11% of the incoming daily radiation; at the end of the experiment, with LAI of 1.9 (and the fraction of intercepted daily radiation close to 0.5), F_NEE was around 10 g CO₂ m⁻² day⁻¹. The night-time ecosystem respiration (R_eco), calculated from eddy fluxes in well-mixed night conditions, show a clear but non-linear dependence with LAI; it ranged from 0.05 to 0.15 mg CO₂ m⁻² s⁻¹ (in average), being the lower limit ideally close to the heterotrophic soil respiration at the site. The gross primary production flux (F_GPP) was linearly related to LAI within the LAI range of this experiment (with 11 g CO₂ m⁻² day⁻¹ increments per unit of LAI) and to the fraction of intercepted radiation. The maximum rates of F_GPP (0.75 mg CO₂ m⁻² s⁻¹) were obtained in the summer mornings of 2002, at LAI close to 1.9. F_GPP was strongly modulated by vapour pressure deficit (VPD) through the canopy conductance, even in absence of water stress. Hence, especially in the summer, the maximum rates of carbon assimilation are reached always before noon. The daily course of F_GPP shows a two-phase pattern, first related to irradiance and then to canopy conductance. The water use efficiency (WUE) was, in average, 3.8, 6.3 and 7 g CO₂ L⁻¹ in 1999, 2001 and 2002, respectively, with maxima always in the early morning. Hourly WUE was strongly related to VPD (WUE = −10.25 + 22.52 × VPD^−0.34). Our results suggest that drip irrigated orchards in general, and olive in particular, deserve specific carbon exchange and carbon budget studies and cannot be easily included in other biomes.     

The response of an emergent sedge Bolboschoenus medianus to salinity and nutrients

The potential for nutrient load (30, 100 and 350 g N m⁻² per year) to alter plant performance under saline conditions (control, 4.5, 9 and 13 dS m⁻¹) was examined in the sedge Bolboschoenus medianus. Relative growth rates (RGR) across nutrient loadings ranged from 30.2 to 41.8 mg g⁻¹ per day in controls and were reduced to 20.9–28.5 mg g⁻¹ per day by salinities of 13 dS m⁻¹. Whilst higher nutrient loads generally increased RGR, the response was smaller at higher salinities. Responses to salinity and nutrient load were specific. Nutrient load increased the RGR via increases in the leaf area ratio (LAR). The LAR ranged from 1.9 to 2.1 m² kg⁻¹ across salinity treatments at 30 g N m⁻² per year, and increased to 2.5–2.8 m² kg⁻¹ at 350 g N m⁻² per year. Salinity reduced the RGR via a reduction in the net assimilation rate (NAR). The NAR in control plants ranged from 14.7 to 16 g m⁻² per day across nutrient loadings and decreased to 11–12 g m⁻² per day at 13 dS m⁻¹. Carbon isotope discrimination of leaves decreased by 2–3‰ in response to 13 dS m⁻¹ at the lower nutrient loadings. A prominent response of B. medianus to salinity was a change in biomass allocation from culms to tubers. In contrast, the response to nutrient load was characterised by a shift in biomass allocation from roots to leaves.     

Oxygen limitation improves glycerol production by Candida krusei in a bioreactor

An oxygen limitation strategy based on dynamic enzyme activity was applied to improve glycerol accumulation and decrease the residual sugar level in a fermentation of Candida krusei in a bioreactor. By applying oxygen limitation at 88 h when the activities of two glycerol synthetic enzymes cytosolic glycerol-3-phosphate dehydrogenase (ctGPD) and glycerol-3-phosphatase (GPP) were low and the activity of mitochondrial glycerol-3-phosphate dehydrogenase (mtGPD) which catalyzes the glycerol dissimilation was high, the glycerol dissimilation was efficiently reduced. The final glycerol concentration reached 51.8 g l⁻¹ at 96 h and 54.9 g l⁻¹ at 116 h, which was 18 and 60% higher than the control (without oxygen limitation), respectively. The residual sugar was consumed completely while it was 11.2 g l⁻¹ at the end of fermentation in the control. Under oxygen limitation, ethanol production was detected at a final concentration of 3.6 g l⁻¹. This work suggests a metabolic flux shift by oxygen limitation in the bioreactor.     

Halophila ovalis (R. Br.) Hook. f. from a submarine hot spring in southern Japan

Colonies of the seagrass Halophila ovalis are found growing adjacent to coral Acropora sp. and Seriatopora hystrix in a submarine hot spring (at 15.7 m depth, 28.6°C) at the north coast of Taketomi Island, near the southern tip of Japan. Halophila plants grow in sea water containing sulphide 930 μg S ml⁻¹ and on the substratum with fine precipitates of the submarine hot spring which have sulphide content up to 5400 μg S g⁻¹ DW. The accumulated sulphide concentration reaches as high as 8400 μg S g⁻¹ DW in under ground tissues and 5700 μg S g⁻¹ DW in above-ground tissues, respectively. It is suggested that, not the sulphide concentration but light and possibly water temperature are the limiting factors for the Halophila colonization in the submarine hot spring.     

Poly-beta-hydroxybutyrate accumulation in Nostoc muscorum and Spirulina platensis under phosphate limitation

Nostoc muscorum and Spirulina platensis were grown under phosphate deficiency in order to investigate the role of internal phosphate pool and activity of alkaline phosphatase on poly-β-hydroxybutyrate (PHB) accumulation. PHB accumulation in N. muscorum increased to 22.7% of dry weight (dw) after 4 day of phosphate deficiency, while the internal phosphate pool reduced to the level of 0.02 μM mg dw⁻¹ at a maximum APase activity of 2.57 nM PNP mg dw⁻¹ h⁻¹. In contrary, S. platensis depicted maxima of 1.39 nM PNP mg dw⁻¹ h⁻¹ on day 30 of incubation, which was about 2 fold lower than the observed value of N. muscorum. PHB content in S. platensis remained low even after prolonged phosphate starvation, and a rise only up to 3.5% of dw was recorded on day 60 of phosphate deficiency. Supplementation of NADPH exogenously to S. platensis cultures grown under phosphate deficiency favoured PHB accumulation in 10, 20 and 30 days old cultures, but not in the cultures grown under phosphate deficiency for 60 days. The possible role of phosphate limitation on PHB accumulation is discussed.     

Quantitative electrochemiluminescence detection of proteins: Avidin-based sensor and tris(2,2'-bipyridine) ruthenium(II) label

Quantitative electrochemiluminescence (ECL) detection of a model protein, bovine serum albumin (BSA) was achieved via biotin–avidin interaction using an avidin-based sensor and a well-developed ECL system of tris(2,2′-bipyridine) ruthenium(II) derivative as label and tri-n-propylamine (TPA) as coreactant. To detect the protein, avidin was linked to the glassy carbon electrode through passive adsorptions and covalent interaction with carboxylate-terminated carbon nanotubes that was used as binder to immobilize avidin onto the electrode. Then, biotinylated BSA tagged with tris(2,2′-bipyridine) ruthenium(II) label was attached to the prepared avidin surface. After binding of BSA labeled with tris(2,2′-bipyridine) ruthenium(II) derivative to the surface-immobilized avidin through biotin, ECL response was generated when the self-assembled modified electrode was immersed in a TPA-containing electrolyte solution. Such double protein labeling protocol with a biotin label for biorecognition and ruthenium label for ECL detection facilitated the detection of protein compared to the classical double antibody sandwich format. The ECL intensity was linearly proportional to the feed concentration of BSA over two orders of magnitude in the range of 15 nM to 7.5 μM. The detection limit was estimated to be 1.5 nM. Further application to the lysozyme analysis was carried out to validate the present approach for an effective and favorable protocol for the quantitative detection of proteins. The dynamic range of lysozyme was from 0.001 g L⁻¹ to 0.1 g L⁻¹ and the detection limit was 0.1 mg L⁻¹. Electrochemical impedance and cyclic voltammetric measurements along with some necessary control experiments were conducted to characterize the successful formation of self-assembled modified electrodes and to grant the whole detection process.     

Purification and immobilization of recombinant variants of Brevundimonas diminuta glutaryl-7-aminocephalosporanic acid acylase expressed in Escherichia coli cells

Cyclotides are naturally occurring mini-proteins that have a diverse range of therapeutically useful biological activities. Although a choice of approaches is available for cyclotides synthesis; most studies have involved the use of peptides extracted from plants. In order to facilitate the screening for structure-activity studies or to exploit them in drug development, a convenient and reliable route for the biosynthesis of cyclotides is of vital importance.

Callus, suspension cultures and hydroponic plants of Oldenlandia affinis were established and have been evaluated for effective cyclotides production processes. The specific accumulation of kalata B1 was affected by cell differentiation as well as agitation; highest accumulation of 2.7 mg g⁻¹ dry weight was detected in agitated hydroponic plant cultures resulting in a productivity of 1.4 mg kalata B1 l⁻¹ day⁻¹.