Characteristics of Streptomyces coelicolor A3(2) aerial spore rodlet mosaic

Cytochemical analysis of Streptomyces coelicolor (A3(2) indicated that the aerial growth rodlet mosaic is a polysaccharide. Statistical analysis of frequency distributions of individual rodlet lengths from control and ether-reoriented spore mosaics indicated that the rodlet fibrillar image is the result of individual particulates, rather than evaginations in a continuous sheet of material. A model of the mature sport envelope was developed from freeze-etch-replicated, thin-sectioned, and critical point dried S. coelicolor A3(2) mature spores. The rodlet mosaic was situated between the outer spore wall and an external granuloma matrix. Mixture spore envelope layers from the inner surface to the external surface are plasma membrane, inner spore wall, outer spore wall, rodlet mosaic, an undefined granular matrix, and the sheath. The granular matrix had an uneven thickness and much of the matrix was frequently absent from the interspore spaces of mature spore chains. Streptomyces coelicolor A3(2) mosaic rodlets were isolated by acetic acid refluxing, then ethanol precipitation. Complete acid hydrolysis of rodlets released on sugar which cochromatographed with D-glucosamine-HCl and released acetic acid at 139% of the expected level. Cell associated rodlet mosaics and isolated mosaic rodlets were hydrolyzed with chitinase. Infrared spectra of isolated rodlets were similar to crab chitin spectra.     

Effects of media composition on submerged culture spores of the entomopathogenic fungus, Metarhizium anisopliae var. acridum, Part 1: Comparison of cell wall characteristics and drying stability among three spore types

Metarhizium anisopliae var. acridum (IMI 330189) can produce at least three spore types in vitro; blastospores, submerged conidia, and aerial conidia, as defined by culturing conditions, sporogenesis, and spore morphology. This study compares morphological characteristics (dimensions and cell wall structure), chemical properties of cell wall surfaces (charge, hydrophobicity, and lectin binding), and performance (germination rate and drying stability) among these three spore types. Submerged conidia and aerial conidia both possessed thick, double-layered cell walls, with hydrophobic regions on their surfaces. However, in contrast to aerial conidia, submerged conidia have: (1) a greater affinity for the lectin concanavalin-A; (2) more anionic net surface charge; and (3) a less distinct outer rodlet layer. Blastospores were longer and more variable in length than both submerged conidia and aerial conidia, and had thinner single-layered cell walls that lacked an outer rodlet layer. Also, blastospores had a greater affinity than either conidia type for the lectin, wheat germ agglutinin. Blastaspores lacked hydrophobic regions on their surface, and had a lower anionic net surface charge than submerged conidia. In culture, blastospores germinated the fastest followed by submerged conidia, and then aerial conidia. Survival of submerged conidia and aerial conidia were similar after drying on silica gel, and was greater than that for blastospores. We provide corroborating information for differentiating spore types previously based on method of production, sporogenesis, and appearance of spores. These physical characteristics may have practical application for predicting spore-performance characteristics relevant to production and efficacy of mycoinsecticides.     

Effects of media composition on submerged culture spores of the entomopathogenic fungus,Metarhizium anisopliae var. acridum Part 2: Effects of media osmolality on cell wall characteristics,carbohydrate concentrations,drying stability,and pathogenicity

This study evaluates osmolality of a submerged conidia-producing medium in relation to the following spore characteristics: yield, morphology (dimensions and cell wall structure), chemical properties of cell wall surfaces (charge, hydrophobicity, and lectin binding), cytoplasmic polyols and trehalose, and performance (drying stability and pathogenicity). Spore production was increased by the addition of up to 150 g l^?1 polyethylene glycol 200 (PEG). Spores from high osmolality medium (HOM spores) containing 100 g l^?1 PEG had thin cell walls and dimensions more similar to blastospores than submerged conidia or aerial conidia. However, a faint electron-dense layer separating primary and secondary HOM spores’ cell walls was discernable by transmission electron microscopy as found in aerial and submerged conidia but not found in blastospores. HOM spores also appeared to have an outer rodlet layer, unlike blastospores, although it was thinner than those observed in submerged conidia. HOM spores’ surfaces possessed hydrophobic microsites, which was further evidence of the presence of a rodlet layer. In addition, HOM spores had concentrations of exposed N-acetyl-β-d-glucosaminyl residues intermediate between blastospores and submerged conidia potentially indicating a masking of underlying cell wall by a rodlet layer. All spore types had exposed α-d-mannosyl and/or α-d-glucosyl residues, but lacked oligosaccharides. Similar to blastospores, HOM spores were less anionic than submerged conida. Although HOM spores had thin cell walls, they were more stable to drying than blastospores and submerged conidia. Relative drying stability did not appear to be the result of differences in polyol or trehalose concentrations, since trehalose concentrations were lower in HOM spores than submerged conidia and polyol concentrations were similar between the two spore types. HOM spores had faster germination rates than submerged conidia, similar to blastospores, and they were more pathogenic to Schistocerca americana than submerged conidia and aerial conidia.     

Two novel homologous proteins of Streptomyces coelicolor and Streptomyces lividans are involved in the formation of the rodlet layer and mediate attachment to a hydrophobic surface

The filamentous bacteria Streptomyces coelicolor and Streptomyces lividans exhibit a complex life cycle. After a branched submerged mycelium has been established, aerial hyphae are formed that may septate to form chains of spores. The aerial structures possess several surface layers of unknown nature that make them hydrophobic, one of which is the rodlet layer. We have identified two homologous proteins, RdlA and RdlB, that are involved in the formation of the rodlet layer in both streptomycetes. The rdl genes are expressed in growing aerial hyphae but not in spores. Immunolocalization showed that RdlA and RdlB are present at surfaces of aerial structures, where they form a highly insoluble layer. Disruption of both rdlA and rdlB in S. coelicolor and S. lividans (DeltardlAB strains) did not affect the formation and differentiation of aerial hyphae. However, the characteristic rodlet layer was absent. Genes rdlA and rdlB were also expressed in submerged hyphae that were in contact with a hydrophobic solid. Attachment to this substratum was greatly reduced in the DeltardlAB strains. Sequences homologous to rdlA and rdlB occur in a number of streptomycetes representing the phylogenetic diversity of this group of bacteria, indicating a general role for these proteins in rodlet formation and attachment.     

Interfacial Self-Assembly of a Fungal Hydrophobin into a Hydrophobic Rodlet Layer

The Sc3p hydrophobin of the basidiomycete Schizophyllum commune is a small hydrophobic protein (100 to 101 amino acids) containing eight cysteine residues. Large amounts of the protein are excreted into the culture medium as monomers, but in the walls of aerial hyphae, the protein is present as an SDS-insoluble complex. In this study, we show that the Sc3p hydrophobin spontaneously assembles into an SDS-insoluble protein membrane on the surface of gas bubbles or when dried down on a hydrophilic surface. Electron microscopy of the assembled hydrophobin shows a surface consisting of rodlets spaced 10 nm apart, which is similar to those rodlets seen on the surface of aerial hyphae. When the purified Sc3p hydrophobin assembles on a hydrophilic surface, a surface is exposed with high hydrophobicity, similar to that of aerial hyphae. The rodlet layer, assembled in vivo and in vitro, can be disassembled by dissolution in trifluoroacetic acid and, after removal of the acid, reassembled into a rodlet layer. We propose, therefore, that the hydrophobic rodlet layer on aerial hyphae arises by interfacial self-assembly of Sc3p hydrophobin monomers, involving noncovalent interactions only. Submerged hyphae merely excrete monomers because these hyphae are not exposed to a water-air interface. The generally observed rodlet layers on fungal spores may arise in a similar way.     

Regulation of Streptomyces development: reach for the sky!

Streptomyces coelicolor is characterized by a complex life cycle and serves as a model system for bacterial development. After a feeding substrate mycelium has been formed, this filamentous bacterium differentiates by forming aerial hyphae that septate into spores. The bld cascade regulates initiation of aerial growth, whereas the whi genes control spore formation. Recent findings indicate the existence of another regulatory pathway that operates after aerial hyphae have started to grow into the air, which we call the sky pathway. This pathway controls the expression of the chaplin and rodlin genes. These genes encode proteins that assemble into a rodlet layer that provides surface hydrophobicity to aerial hyphae and spores.     

The formation of the rodlet layer of streptomycetes is the result of the interplay between rodlins and chaplins

Streptomycetes form hydrophobic aerial hyphae that eventually septate into hydrophobic spores. Both aerial hyphae and spores possess a typical surface layer called the rodlet layer. We present here evidence that rodlet formation is conserved in the streptomycetes. The formation of the rodlet layer is the result of the interplay between rodlins and chaplins. A strain of Streptomyces coelicolor in which the rodlin genes rdlA and/or rdlB were deleted no longer formed the rodlet layer. Instead, these surfaces were decorated with fine fibrils. Deletion of all eight chaplin genes (strain DeltachpABCDEFGH) resulted in the absence of the rodlet layer as well as the fibrils at surfaces of aerial hyphae and spores. Apart from coating these surfaces, chaplins are involved in the escape of hyphae into the air, as was shown by the strong reduction in the number of aerial hyphae in the DeltachpABCDEFGH strain. The decrease in the number of aerial hyphae correlated with a lower expression of the rdl genes in the colony. Yet, expression per aerial hypha was similar to that in the wild-type strain, indicating that expression of the rdl genes is initiated after the hypha has sensed that it has grown into the air.     

The effect of sunlight on allergen release from spores of the fungus Alternaria

Airborne fungal spores are known carriers of allergen. Correlations between spore counts and allergen concentrations are poor. It is known that germination increases allergen release, implicating spore viability as a determinant of allergen release. During aerial dispersal, spores can be exposed to prolonged periods of ultraviolet (UV) light which can reduce viability of spores. We examined the relation between spore viability and allergen release in two experiments: firstly spores from culture were treated with a UV wavelength of 254?nm (not present in sunlight reaching the earth's surface) or autoclaved, and secondly, spores were exposed to simulated sunlight over three days. In both studies viability was measured (by germination on agar and by metabolic activity with nitro-blue tetrazolium vital stain) and allergen release by the Halogen immunoassay. The UV light reduced the proportion of spores able to germinate but did not affect metabolic activity or allergen release. Autoclaving reduced the proportion of spores releasing allergen by half (p<0.0001). Three days' exposure to simulated sunlight correlated negatively with spore germination and metabolic activity (p<0.0001), but did not affect allergen release (p=0.799). In conclusion, simulated sunlight reduced the metabolic activity and germinability of spores however the proportion releasing allergen remained unaffected. These findings suggest that spore counts may reflect allergen concentrations in the air if spores are dead or dormant. The contribution of viable spores to concentrations of airborne allergen, as well as the role of germination in allergen delivery to the respiratory tract, remains to be resolved.     

Morphological characterization and germination of aerial and submerged spores of the entomopathogenic fungus Verticillium lecanii

Under solid-state and liquid-state cultivations, the entomopathogenic fungus Verticillium lecanii F091 produced different types of spores. The aerial spores (AS) on cooked rice formed clusters on the tips of conidiophores, while the submerged spores (SS) were dispersed in the medium. The aerial spore appeared relatively uniform in size, which was 6.1 ± 0.9 m long, and 2.2 ± 0.3 m wide. The submerged spore varied in shape and size, with a mean length of 5.0 ± 1.0 m and width of 1.9 ± 0.5 m. Under scanning electron microscopy, the AS had a tendency to have rough, brittle surface characteristics; however, the SS appeared smooth on the surface. These spores were compared in two different germination media. On SMAY (Sabouraud maltose, agar, yeast extract, and neopeptone) coated coverslips, the AS did not show germ tubes until 8 h of incubation; while the SS showed many germ tubes. However, over 90% spore germination ratio was reached for both types of spores at 18-h of incubation. In the liquid medium, the SS germinated rapidly and many spores even produced spores on the spores; while the AS germinated, grew, and branched in the submerged culture gradually, and some sporulated on the tips of the short branches, or on the mycelia until 18 h of incubation. Evidently, the germination, growth patterns of aerial or submerged spores differed greatly under the different culture conditions. The virulence of the pathogen in relation to the type of spore of V. lecanii is discussed.     

Sporulation of Streptomyces griseus in submerged culture.

A wild-type strain of Streptomyces griseus forms spores both on solid media (aerial spores) and in liquid culture (submerged spores). Both spore types are highly resistant to sonication, but only aerial spores are resistant to lysozyme digestion. Electron micrographs suggest that lysozyme sensitivity may result from the thinner walls of the submerged spores. Studies of the life cycle indicate that neither streptomycin excretion nor extracellular protease activity is required for sporulation: the analysis of mutants, however, suggests that antibiotic production may be correlated with the ability to sporulate. A method was devised to induce the rapid sporulation of S. griseus in a submerged culture. This method, which depends on nutrient deprivation, was used to determine that either ammonia or phosphate starvation can trigger sporulation and that the enzyme glutamine synthetase may be useful as a sporulation marker after phosphate deprivation.     

Assessment of elasticity and topography of Aspergillus nidulans spores via atomic force microscopy

Previous studies have described both surface morphology and adhesive properties of fungal spores, but little information is currently available on their mechanical properties. In this study, atomic force microscopy (AFM) was used to investigate both surface topography and micromechanical properties of Aspergillus nidulans spores. To assess the influence of proteins covering the spore surface, wild-type spores were compared with spores from isogenic rodA(+) and rodA(-) strains. Tapping-mode AFM images of wild-type and rodA(+) spores in air showed characteristic "rodlet" protein structures covering a granular spore surface. In comparison, rodA(-) spores were rodlet free but showed a granular surface structure similar to that of the wild-type and rodA(+) spores. Rodlets were removed from rodA(+) spores by sonication, uncovering the underlying granular layer. Both rodlet-covered and rodlet-free spores were subjected to nanoindentation measurements, conducted in air, which showed the stiffnesses to be 110 +/- 10, 120 +/- 10, and 300 +/- 20 N/m and the elastic moduli to be 6.6 +/- 0.4, 7.0 +/- 0.7, and 22 +/- 2 GPa for wild-type, rodA(+) and rodA(-) spores, respectively. These results imply the rodlet layer is significantly softer than the underlying portion of the cell wall.     

Characterization of changes to the cell surface during the life cycle of Streptomyces coelicolor: atomic force microscopy of living cells

Cell surface changes that accompany the complex life cycle of Streptomyces coelicolor were monitored by atomic force microscopy (AFM) of living cells. Images were obtained using tapping mode to reveal that young, branching vegetative hyphae have a relatively smooth surface and are attached to an inert silica surface by means of a secreted extracellular matrix. Older hyphae, representing a transition between substrate and aerial growth, are sparsely decorated with fibers. Previously, a well-organized stable mosaic of fibers, called the rodlet layer, coating the surface of spores has been observed using electron microscopy. AFM revealed that aerial hyphae, prior to sporulation, possess a relatively unstable dense heterogeneous fibrous layer. Material from this layer is shed as the hyphae mature, revealing a more tightly organized fibrous mosaic layer typical of spores. The aerial hyphae are also characterized by the absence of the secreted extracellular matrix. The formation of sporulation septa is accompanied by modification to the surface layer, which undergoes localized temporary disruption at the sites of cell division. The characteristics of the hyphal surfaces of mutants show how various chaplin and rodlin proteins contribute to the formation of fibrous layers of differing stabilities. Finally, older spores with a compact rodlet layer develop surface concavities that are attributed to a reduction of intracellular turgor pressure as metabolic activity slows.     

Study of the structure of colonies of active and inactive Actinomyces parvullus variants using luminescence and scanning microscopy]

The colony structure of the active and inactive proactinomycete-like variants of Actinomyces parvullus producing actinomycin D was studied with luminescent and scanning microscopy. Clear differentiation of the colony profile was shown by the structure and functions of the mycelium layers. A zone of active synthesis and accumulation of the antibiotic was observed in the colonies of the active variant in the upper part of the substrate mycelium with reddish-yellow self luminescence in UV light and characteristic close hyphae "cemented" by the intracellular substance. Formations of the granule type were often noted on the hyphae of that layer. The layer of the aerial mycelium was loosely connected with the substrate mycelium and consisted of sporophores and spore chains partially broken into single spores. The colonies of the inactive proactinomycete-like variant had a slightly differentiated profile with a sponge-like structure, no zones of the antibiotic synthesis being found. The presence of the intracellular substance was observed in the upper part of the colony supersubstrate mycelium.     

Polymorphism of a culture of Actinomyces chromogenes var. trienicus, the producer of chromotrienine]

Variation of Actinomyces chromogenes var. trienicus 141-18 MSU, an organism producing trienin was studied under laboratory conditions. Nine stable spontaneous variants were isolated from the population of the initial culture when grown on Gause medium No. 1. The variants varied in differentiation and biosynthetic capacity, including such characteristics as size and form of the colonies, ability for formation of the aerial mycelium and its colour, capacity for sporulation, form of the spore chains and antibiotic production property. In the secondary structures the spores formed only in 6 variants out of 9 isolates. The spore form and spore membrane surface were close in all sporogenic variants, while there were significant differences in the structure of the sporophores. The variants forming the aerial mycelium of the same colour as that of the initial culture did not differ from it also by the nature of the spore chains (spirals with 3--8 turns). The variants with lighter aerial mycelium than that of the initial population formed straight sporophores or spirals with a small number of the turns (1--3). The comparative study of the antimicrobial spectrum of the variants and the component composition of the synthesized antibiotic complex showed that the asporogenic variants and dwarf variant signifcantly differed with respect to their phenotypes from the other cultures and had no antagonistic action. One of the assporogenic variants had only insignificant activity. All the spore forming variants did not differ from the initial culture in the complex of the antibiotics synthesized.     

Role of the spore coat layers in Bacillus subtilis spore resistance to hydrogen peroxide, artificial UV-C, UV-B, and solar UV radiation

Spores of Bacillus subtilis possess a thick protein coat that consists of an electron-dense outer coat layer and a lamellalike inner coat layer. The spore coat has been shown to confer resistance to lysozyme and other sporicidal substances. In this study, spore coat-defective mutants of B. subtilis (containing the gerE36 and/or cotE::cat mutation) were used to study the relative contributions of spore coat layers to spore resistance to hydrogen peroxide (H(2)O(2)) and various artificial and solar UV treatments. Spores of strains carrying mutations in gerE and/or cotE were very sensitive to lysozyme and to 5% H(2)O(2), as were chemically decoated spores of the wild-type parental strain. Spores of all coat-defective strains were as resistant to 254-nm UV-C radiation as wild-type spores were. Spores possessing the gerE36 mutation were significantly more sensitive to artificial UV-B and solar UV radiation than wild-type spores were. In contrast, spores of strains possessing the cotE::cat mutation were significantly more resistant to all of the UV treatments used than wild-type spores were. Spores of strains carrying both the gerE36 and cotE::cat mutations behaved like gerE36 mutant spores. Our results indicate that the spore coat, particularly the inner coat layer, plays a role in spore resistance to environmentally relevant UV wavelengths.     

Properties of Bacillus megaterium and Bacillus subtilis mutants which lack the protease that degrades small, acid-soluble proteins during spore germination.

During germination of spores of Bacillus species the degradation of the spore's pool of small, acid-soluble proteins (SASP) is initiated by a protease termed GPR, the product of the gpr gene. Bacillus megaterium and B. subtilis mutants with an inactivated gpr gene grew, sporulated, and triggered spore germination as did gpr+ strains. However, SASP degradation was very slow during germination of gpr mutant spores, and in rich media the time taken for spores to return to vegetative growth (defined as outgrowth) was much longer in gpr than in gpr+ spores. Not surprisingly, gpr spores had much lower rates of RNA and protein synthesis during outgrowth than did gpr+ spores, although both types of spores had similar levels of ATP. The rapid decrease in the number of negative supertwists in plasmid DNA seen during germination of gpr+ spores was also much slower in gpr spores. Additionally, UV irradiation of gpr B. subtilis spores early in germination generated significant amounts of spore photoproduct and only small amounts of thymine dimers (TT); in contrast UV irradiation of germinated gpr+ spores generated almost no spore photoproduct and three to four times more TT. Consequently, germinated gpr spores were more UV resistant than germinated gpr+ spores. Strikingly, the slow outgrowth phenotype of B. subtilis gpr spores was suppressed by the absence of major alpha/beta-type SASP. These data suggest that (i) alpha/beta-type SASP remain bound to much, although not all, of the chromosome in germinated gpr spores; (ii) the alpha/beta-type SASP bound to the chromosome in gpr spores alter this DNA's topology and UV photochemistry; and (iii) the presence of alpha/beta-type SASP on the chromosome is detrimental to normal spore outgrowth.     

Heat, hydrogen peroxide, and UV resistance of Bacillus subtilis spores with increased core water content and with or without major DNA-binding proteins.

Spores of a Bacillus subtilis strain with an insertion mutation in the dacB gene, which codes for an enzyme involved in spore cortex biosynthesis, have a higher core water content than wild-type spores. Spores lacking the two major alpha/beta-type small, acid-soluble proteins (SASP) (termed alpha-beta- spores) have the same core water content as do wild-type spores, but alpha-beta- dacB spores had more core water than did dacB spores. The resistance of alpha-beta-, alpha-beta- dacB, dacB, and wild-type spores to dry and moist heat, hydrogen peroxide, and UV radiation has been determined, as has the role of DNA damage in spore killing by moist heat and hydrogen peroxide. These data (i) suggest that core water content has little if any role in spore UV resistance and are consistent with binding of alpha/beta-type SASP to DNA being the major mechanism providing protection to spores from UV radiation; (ii) suggest that binding of alpha/beta-type SASP to DNA is the major mechanism unique to spores providing protection from dry heat; (iii) suggest that spore resistance to moist heat and hydrogen peroxide is affected to a large degree by the core water content, as increased core water resulted in large decreases in spore resistance to these agents; and (iv) indicate that since this decreased resistance (i.e., in dacB spores) is not associated with increased spore killing by DNA damage, spore DNA must normally be extremely well protected against such damage, presumably by the saturation of spore DNA by alpha/beta-type SASP.     

Relationship between basidiospore size,shape and life history characteristics: a comparison of polypores

Although spore dispersal is the predominant mode of spread in fungi, the functional ecology of offspring (spore) size and shape has received little attention. We investigated the relationship between spore size (volume) and shape and various life history parameters among 303 European polypore species. In an analysis of variance, basidiocarp size, nutritional mode (parasitic vs. saprotrophic) and host (conifer vs. deciduous) accounted for a significant part of the variation in spore size. Species producing large basidiocarps also produce large spores, parasites produce larger spores than saprotrophs, and species colonizing deciduous trees generally produce larger spores than those colonizing conifers. There was a correlation between spore size and shape, with larger spores being more spherical. The most important factors accounting for variation in spore shape were rot type (white rot vs. brown rot) and nutritional mode, with white rot species and parasites having more spherical spores compared to brown rotters and saprotrophs.     

Role of DNA repair in Bacillus subtilis spore resistance.

Wet-heat or hydrogen peroxide treatment of wild-type Bacillus subtilis spores did not result in induction of lacZ fusions to three DNA repair-related genes (dinR, recA, and uvrC) during spore outgrowth. However, these genes were induced during outgrowth of wild-type spores treated with dry heat or UV. Wet-heat, desiccation, dry-heat, or UV treatment of spores lacking major DNA-binding proteins (termed alpha-beta- spores) also resulted in induction of the three DNA repair genes during spore outgrowth. Hydrogen peroxide treatment of alpha-beta-spores did not result in induction of dinR- and rerA-lacZ but did cause induction of uvrC-lacZ during spore outgrowth. Spores of a recA mutant were approximately twofold more UV sensitive and approximately ninefold more sensitive to dry heat than were wild-type spores but were no more sensitive to wet heat and hydrogen peroxide. In contrast, alpha-beta- recA spores were significantly more sensitive than were alpha-beta- spores to all four treatments, as well as to desiccation. Surprisingly, RecA levels were quite low in dormant spores, but RecA was synthesized during spore outgrowth. Taken together, these data (i) are consistent with previous suggestions that some treatments (dry heat and UV with wild-type spores; desiccation, dry and wet heat, hydrogen peroxide, and UV with alpha-beta- spores) that kill spores do so in large part by causing DNA damage and (ii) indicate that repair of DNA damage during spore outgrowth is an important component of spore resistance to a number of treatments, as has been shown previously for UV.     

A method of visualizing and assessing deposits of aerially sprayed insect microbes

A technique is described for visualizing and assessing deposits of various types of insect microbes on membrane filter surface. It is proposed as an accurate method of determining coverage of entomopathogenic microorganisms sprayed in a tower or from an aircraft in microbial control operations. The actual numbers of spores and/or crystals and number of International Units deposited per unit area, spore: crystal ratio, microbial impact droplet size, and spore viability of Bacillus thuringiensis have been determined with simulated aerial applications. The morphological integrity of different types of insect pathogens is easily distinguishable with the technique.Field trials with nuclear polyhedrosis virus of the spruce budworm, Choristoneura fumiferana, demonstrate the utility of the method in insect pest control by aerially applied microbial agents.