Speciation studies of ternary complexes of some essential divalent metal ions with L-histidine and L-glutamic acid in DMSO-water mixtures

Abstract

Chemical speciation of ternary complexes of Ca(II), Mg(II) and Zn(II) ions with L-histidine as the primary ligand (L) and L-glutamic acid as the secondary ligand (X) has been studied pH metrically in the concentration range of 0.0-60.0% v/v DMSO-water mixtures maintaining an ionic strength of 0.16 mol L^-1 using sodium chloride at 303.0 K. Titrations were carried out in different relative concentrations (M:L:X = 1.0:2.5:2.5, 1.0:2.5:5.0, 1.0:5.0:2.5) of metal (M) to L-histidine to L-glutamic acid with sodium hydroxide. Stability constants of ternary complexes were refined with MINIQUAD75. The best-fit chemical models were selected based on statistical parameters and residual analysis. The predominant species detected for Ca(II), Mg(II) and Zn(II) are ML₂XH₂, MLXH₂ and MLX₂. Extra stability of ternary complexes compared to their binary complexes was explained to be due to electrostatic interactions of the side chains of ligands, charge neutralisation, chelate effect, stacking interactions and hydrogen bonding. The species distribution with pH at different compositions of DMSO and the plausible equilibria for the formation of species are discussed.     

Metal based drugs: design,synthesis and in-vitro antimicrobial screening of Co(II), Ni(II), Cu(II) and Zn(II) complexes with some new carboxamide derived compounds: crystal structures of N-[ethyl(propan-2-yl)carbamothioyl]thiophene-2-carboxamide and its copper(II) complex

A new series of compounds derived from thiophene-2-carboxamide were synthesized and characterized by IR, ¹H-NMR and ¹³C-NMR, mass spectrometry and elemental analysis. These compounds were further used to prepare their Co(II), Ni(II), Cu(II) and Zn(II) metal complexes. All metal(II) complexes were air and moisture stable. Physical, spectral and analytical data have shown the Ni(II) and Cu(II) complexes to exhibit distorted square-planar and Co(II) and Zn(II) complexes tetrahedral geometries. The ligand (L¹) and its Cu(II) complex were characterized by the single-crystal X-ray diffraction method. All the ligands and their metal(II) complexes were screened for their in-vitro antimicrobial activity. The antibacterial and antifungal bioactivity data showed that the metal(II) complexes were found to be more potent than the parent ligands against one or more bacterial and fungal strains.     

Cobalt(II), nickel(II), copper(II) and zinc(II) complexes with an open-chain pentadentate nitrogen ligand

The open-chain, potentially, pentadentate, ligan 1,11-bis(dimethylamino)-3,6,9-trimethyl-3,6,9,-triazaundecane (Me₇tetren) forms a series of metal complexes having the general formula [M(Me₇tetren)]Y₂ (Y = 1, M = Co, Ni; Y = ClO₄, M = Co, Ni, Cu, Zn). On the basis of their physical properties, it is suggested that all these compounds contains isostructural five-coordinate [M(Me₇tetren)]²⁺ cations, the ligand acting as pentadentate. These complexes react in solution with thiocyanate ion to give mono- and, with exception of copper(II), di-thiocyanato five- and six-co-ordinate derivatives. Mono-thiocyanato derivatives of cobalt(II), nickel(II) and zinc(II) have been isolated as tetraphenylborate salts. Cobalt(II) and nickel (II) di-thiocyanato derivatives have been also isolated. Results are discussed in terms of the steric requirements of the ligand and electronic properties of the metal ions.     

Metal-based ethanolamine-derived compounds: a note on their synthesis,characterization and bioactivity

Abstract

Metal-based ethanolamines, (L¹)–(L⁴) coordinated with Co(II), Cu(II), Ni(II) and Zn(II) metals in 1:2 (metal:ligand) molar ratio to produce new compounds have been reported. These compounds were screened for their bactericidal/fungicidal activity against a number of bacterial (Escherichia coli, Shigella flexneri, Pseudomonas aeruginosa, Salmonella typhi, Staphylococcus aureus and Bacillus subtilis) and fungal strains (Trichophyton longifusus, Candida albicans, Aspergillus flavus, Microsporum canis, Fusarium solani and Candida glabrata) alongside against a shrimp species known as Artemia salina. The screening results indicated that metal complexes have significantly higher activity than uncomplexed ligands against one or more bacterial/fungal species due to chelation. The ligand (L⁴) displayed good bacterial and fungal activity as compared to other ligands. The antibacterial results revealed that the Zn(II) complex (16) of (L⁴) was found to be the most active complex and Co(II) complex (14) of the same ligand (L⁴), demonstrated the highest antifungal activity.     

Tin and iron halogenides as additives in ruthenium-catalyzed olefin metathesis

Different metal halogenides were used as additives in metathesis of 1-octene or in several cross-metathesis reactions catalysed by first and second generation Grubbs catalyst, 1 and 2, as well as by an improved first generation-type Grubbs catalyst 3. Tin(II) chloride and bromide enhance the performance of 1 and 3. The influence on 2 is rather minor under the chosen reaction conditions. The addition of iron(II) chloride and bromide results in an improvement of 1 to a lesser extent as the tin salts. The frequently observed isomerisation of olefins in metathesis reactions catalysed by 1 is suppressed in the presence of the applied tin salts.     

Metal-based carboxamide-derived compounds endowed with antibacterial and antifungal activity

Abstract

A series of three bioactive thiourea (carboxamide) derivatives, N-(dipropylcarbamothioyl)-thiophene-2-carboxamide (L¹), N-(dipropylcarbamothioyl)-5-methylthiophene-2-carboxamide (L²) and 5-bromo-N-(dipropylcarbamothioyl)furan-2-carboxamide (L³) and their cobalt(II), copper(II), nickel(II) and zinc(II) complexes (1)–(12) have been synthesized and characterized by their IR,¹H-NMR spectroscopy, mass spectrometry and elemental analysis data. The Crystal structure of one of the ligand, N-(dipropylcarbamothioyl)thiophene-2-carboxamide (L¹) and its nickel(II) and copper(II) complexes were determined from single crystal X-ray diffraction data. All the ligands and metal(II) complexes have been subjected to in vitro antibacterial and antifungal activity against six bacterial species (Escherichia coli. Shigella flexneri. Pseudomonas aeruginosa. Salmonella typhi. Staphylococcus aureus and Bacillus subtilis) and for antifungal activity against six fungal strains (Trichophyton longifusus. Candida albicans. Aspergillus flavus. Microsporum canis. Fusarium solani and Candida glabrata). The in vitro antibacterial and antifungal bioactivity data showed the metal(II) complexes to be more potent than the parent ligands against one or more bacterial and fungal strains.     

Coordinated cations in dipicolinato complexes of divalent metal ions

Several salts of alkali, alkaline earth metal and organic ammonium cations of a complex anion [ML₂]²⁻ {Where L = dipicolinato dianion, M = copper(II), nickel(II) and zinc(II)} are prepared. The coordination effect of [ML₂]²⁻ with the cations such as sodium, potassium, calcium, magnesium, and organic cations namely diammonium cation of 1,5-pentanediamine, diammonium cation of 1,8-octyldiamine, mono ammonium cation of 4-aminobenzylamine are studied by determining their X-ray crystal structures. Depending on the nature of cations, four different types of structures are obtained. When calcium is the cation a polymeric structure with calcium ions bridging the [ML₂]²⁻ is observed. The salts having sodium and potassium cations form polymeric chain like structures by oxo and aqua bridges. In the case of magnesium, the hydrated form of magnesium cations coordinates to [ML₂]²⁻. The organic ammonium salts of [ML₂]²⁻ have the structural features of conventional ionic complexes. These salts easily exchange cations. The organic ammonium salts of [ML₂]²⁻ decomposes to give the corresponding metal oxides at relatively low temperature range 300-450 °C.     

Metal-directed and ligand-distorted assembly of chiral/achiral one-dimensional coordination polymers: Syntheses, structures and physical properties

The hydrothermal reactions of 5-bromoisophthalic acid (H₂BIPA) and metal salts in the presence of pyridine (py) result in three new coordination polymers, namely, M(BIPA)(py)₃ [M = Co(II) (1), Ni(II) (2)] and Zn(BIPA)(py)₂·H₂O (3), all of which have been characterized by single-crystal X-ray, elemental analysis, infrared spectroscopy, and thermogravimetric analysis. Compounds 1 and 2 are isostructural and contain 2₁ helical chains made up of metal ions and BIPA²⁻ ligand, the chains are further formed to the supramolecular structures by the π?π interactions between the adjacent parallel py rings. Compound 3 has a 1D chiral left-handed helical chain structure. It is notable that 3 is obtained by second order spontaneous resolution using achiral starting materials. Moreover, the solid-state CD spectrum of single crystals and powder samples of 3 is investigated. The nonlinear optical measurement shows that 3 displayed a second-harmonic-generation (SHG) response of 0.7 times that for urea.     

Tin and Tin-Resistant Microorganisms in Chesapeake Bay

Sediment and water samples from nine stations in Chesapeake Bay were examined for tin content and for microbial populations resistant to inorganic tin (75 mg of Sn liter⁻¹ as SnCl₄·5H₂O) or to the organotin compound dimethyltin chloride [15 mg of Sn liter⁻¹ as (CH₃)₂SnCl₂]. Tin concentrations in sediments were higher (3.0 to 7.9 mg kg⁻¹) at sites impacted by human activity than at open water sites (0.8 to 0.9 mg kg⁻¹), and they were very high (239.6 mg kg⁻¹) in Baltimore Harbor, which is impacted by both shipping and heavy industry. Inorganic tin (75 mg Sn liter⁻¹) in agar medium significantly decreased viable counts, but its toxicity was markedly reduced in liquid medium; it was not toxic in medium solidified with silica gel. Addition of SnCl₄·5H₂O to these media produced a tin precipitate which was not involved in the metal's toxicity. The data suggest that a soluble tin-agar complex which is toxic to cells is formed in agar medium. Thus, the toxicity of tin depends more on the chemical species than on the metal concentration in the medium. All sites in Chesapeake Bay contained organisms resistant to tin. The microbial flora was more sensitive to (CH₃)₂SnCl₂ than to SnCl₄·5H₂O. The elevated level of tin-resistant microorganisms in some aeas not containing unusually high tin concentrations suggests that factors other than tin may participate in the selection for a tin-tolerant microbial flora.     

Amido functional phthalocyanines as metal ion sensor; synthesis, characterization, spectroscopy, electrochemistry, in-situ spectroelectrochemistry

Tetrasubstituted metal ion sensor amido functional phthalocyanines, PyMA-MPc, {PyMA: [N¹,N³-bis(pyridin-2-ylmethyl)malonamide], M = Pd(II), Cu(II) and Co(II)} bearing amido functionality on the periphery were synthesized from the corresponding tetrasubstituted diethylmalonate substituted phthalocyanines, DEM-MPc (DEM: diethylmalonate; M = Pd(II), Cu(II) and Co(II)), and 2-aminopyridine in N,N-dimethylaminoethanol (DMAE) solvent. The new complexes have been characterized by elemental analysis, FT-IR, ¹H NMR and mass spectra. Peripheral malonamide groups of the phthalocyanine complexes serve as exocyclic binding sites for metal ion, such as Pd^II and also increase the solubility in protic solvents, i.e MeOH. Protonation of the pyridyl groups with HCl formed quaternized salts of the MPc, N¹,N³-bis(pyridin-2-ylmethyl)malonamide substituted metallophthalocyanines (PyMA-PdPc×8HCl) which are freely soluble in aqueous media. Methylation of M[Pc(CH(COOC₂H₅)₂)₄] with CH₃I gave the octacationic 2(3),9(10),16(17),23(24)-tetrakis-[N¹,N³-bis(N-methylpyridin-2-ylmethyl)malonamide]-phthlocyaninato Cu(II) salts which are freely soluble in water. Voltammetric and spectroelectrochemical studies show that while PyMA-Pd(II)Pc and PyMA-Cu(II)Pc give ring-based reversible/quasi-reversible redox processes, PyMA-Co(II)Pc give both metal and ring-based, reversible/quasi-reversible electron transfer processes.     

The complexation of aqueous metal ions relevant to biological applications. 2. Reactions of copper(II) citrate and copper(II) succinate with selected amino acids

Abstract

Addition of amino acids, glycine, alanine, and serine, to poorly soluble copper(II) salts [copper(II) citrate and copper(II) succinate] all increase solubility of the copper(II) salts. Relative increases in solubility follow the polarity trend in the selected amino acids, with serine creating the greatest increase in solubility. Simultaneous equilibria calculations indicate the formation of mixed-ligand complexes in the copper(II) succinate–amino acid systems, the first time such mixed-ligand complexes have been observed. In contrast, mixed-ligand complexes are not predicted in the copper(II) citrate–amino acid systems. Potential bioavailability of copper(II) appears to be increased by the inclusion of amino acids in solution, roughly in parallel with the increase in solubility of the copper(II) salt. Therefore, measurement of the change in solubility caused by addition of amino acids to aqueous solution gives qualitative insight to the potential increase in bioavailability of the metal ion.     

Chemical speciation of binary complexes of L-valine with Co(II), Ni(II) and Cu(II) in propylene glycol-water mixtures

Abstract

Chemical speciation of Co(II), Ni(II) and Cu(II) complexes of L-valine in 0.0-60.0% v/v propylene glycol-water mixtures at an ionic strength of 0.16 mol L^-1 and 303.0 K was studied pH-metrically. Models containing different number of species were refined by using the computer program MINIQUAD75. The number of species in the models was chosen based on exhaustive modelling. The best-fit chemical models were arrived at based on statistical parameters. The formation and distribution of different species with varying pH were represented in the form of distribution diagrams. Influence of the solvent on the speciation was discussed based on the dielectric constant of the medium.     

The effect of pH on the lability of lead and cadmium sorbed on humic acid particles

Abstract

Sorption of lead(II) or cadmium(II) ions on humic acid particles (at pH 3.5) yields surface complexes which are sparingly soluble in the pH 3.55 region. Interaction of these species with acetic acid or dilute nitric acid released ASV labile metal species (mainly hydrated metal ion). When the pH was adjusted between 4 and 7, increasing amounts of the metal humate species (and humic acid substrate) dissolved and low levels of ASV labile species were detected. Overnight interaction with an excess of acetate ions (0.01 M) led to higher lability values (attributed to acetate/humate ligand exchange). The percentage of labile metal ion detected in acetate solutions varied with the amount of metal ion initially sorbed (range 100 to 500 mmol g^?1). With the lower loadings, the ASV labile levels peaked in the pH 6–7 region (at around 12% of total sorbed cadmium, and 4% of total lead). In alkaline solutions, the percentage of labile Cd fell to about half of the peak value, but with Pb, lability values increased at pH > 8, due possibly to the formation of hydroxy complex species. The ASV lability of the Cd and Pb humates, and their 24 hour lability values (determined using a transfer to cation exchanger technique) has been compared with the behaviour of Cu and Zn humates (using similar conditions).     

Antibacterial and antifungal metal based triazole Schiff bases

A new series of four biologically active triazole derived Schiff base ligands (L¹–L⁴) and their cobalt(II), nickel(II), copper(II) and zinc(II) complexes (1–16) have been synthesized and characterized. The ligands were prepared by the condensation reaction of 3-amino-5-methylthio-1H-1,2,4-triazole with chloro-, bromo- and nitro-substituted 2-hydroxybenzaldehyde in an equimolar ratio. The antibacterial and antifungal bioactivity data showed the metal(II) complexes to be more potent antibacterial and antifungal than the parent Schiff bases against one or more bacterial and fungal species.     

Macrocyclic complexes: synthesis,characterization, antitumor and DNA binding studies

Abstract

The present paper deals with the synthesis of novel macrocyclic complexes of the type [MLX]X, where [(M?=?Co(II) (1), and Ni(II) (2) X?=?(Cl₂)]. The complexes are synthesized by the reaction of ligand(L)diquinolineno[1,3,7,9]tetraazacyclododecine-7,15-ethane(14H,16H)-benzene with the corresponding metal salts. The synthesized complexes are thoroughly characterized by elemental analysis, FT-IR, ¹H-NMR, Mass and electronic spectra. The complexes (1) and (2) were evaluated for in vitro cytotoxicity against human breast adenocarcinoma cell (MCF-7). MTT cytotoxicity studies shows both the complexes are most effective. The binding properties of these complexes with calf thymus-DNA were studied by absorption, emission spectra, viscosity measurements, and thermal denaturation studies. On binding to CT-DNA, the absorption spectrum undergoes bathochromic and hypochromic shifts. The absorption spectral results indicate that the intrinsic binding constant (K_b) are 4.8?×?10⁵?M^?1 for (1) and 3.9?×?10⁵?M^?1 for (2) respectively, suggesting that complex (1) binds more strongly to CT-DNA than complex (2). The viscosity measurement results revealed the viscosity of sonicated rod like DNA fragments increased when the complex was added to the solution of CT-DNA. The synthesized ligand and its metal complexes are screened for antibacterial and antifungal activities.     

In vitro antimicrobial studies of new benzimidazolium salts and silver N-heterocyclic carbene complexes

A series of new benzimidazolium salts (1a–g) were synthesized from the reaction of 1-(4-vinylbenzyl)benzimidazole with various alkyl halides. These salts were used to synthesize silver N-heterocyclic carbene (Ag-NHC) complexes (2a–f). The thirteen compounds were characterized by FT-IR, NMR (¹H and ¹³C) spectroscopic methods and an elemental analysis technique. These selected candidates were tested for their in vitro antimicrobial activities. Antibacterial and antifungal results indicated that the new salts, and particularly their silver complexes, were found to be strongly effective against seven Gram (?) bacterial strains, three Gram (+) bacterial strains and one yeast (Candida albicans).     

Speciation studies of Co(II), Ni(II) and Cu(II) complexes of L-valine in acetonitrile–water mixtures

Abstract

Chemical speciation of binary complexes of Co(II), Ni(II) and Cu(II) with L-valine in 0.0-60.0% v/v acetonitrile-water mixtures was studied pH-metrically at an ionic strength of 0.16 mol L^-1 at 303.0 K. The existence of different binary complexes was established from the modelling studies, using the computer program MINIQUAD75. The appropriateness of the model was ascertained by studying the effect of errors in concentrations of the reagents. The trend in variation of stability constants with change in the permittivity of the medium is explained on the basis of electrostatic and non-electrostatic forces. The species distribution diagrams and the plausible equilibria for the formation of the species are also presented.     

Density functional theory molecular modelling,DNA interactions,antioxidant, antimicrobial,anticancer and biothermodynamic studies of bioactive water soluble mixed ligand complexes

A novel series of bioactive water soluble mixed ligand complexes (1–5) [M^II(L)(phen)AcO]. nH₂O {where M?=?Cu (1) n?=?2; Co (2), Mn (3), Ni (4), n?=?4 and Zn (5) n?=?2} were synthesized from 2-(2-Morpholinoethylimino) methyl)phenol Schiff base ligand (LH), 1, 10-phenanthroline and metal(II) acetate salt in a 1:1:1 stoichiometric ratio and characterized by several spectral techniques. The obtained analytical and spectral data suggest the octahedral geometry around the central metal ion. Density functional theory calculations have been further supportive to explore the optimized structure and chemical reactivity of these complexes from their frontier molecular orbitals. Gel electrophoresis result indicates that complex (1) manifested an excellent DNA cleavage property than others. The observed binding constants with free energy changes by electronic absorption technique and DNA binding affinity values by viscosity measurements for all compounds were found in the following order (1)?>?(2)?>?(4)?>?(5)?>?(3) > (LH). The binding results and thermodynamic parameters are described the intercalation mode. In vitro antioxidant properties disclose that complex (1) divulges high scavenging activity against DPPH^?, ^?OH, O₂^?? NO^?, and Fe³⁺. The antimicrobial reports illustrate that the complexes (1–5) were exhibited well defined inhibitory effect than ligand (LH) against the selected different pathogenic species. The observed percentage growth inhibition against A549, HepG2, MCF-7, and NHDF cell lines suggest that complex (1) has exhibited superior anticancer potency than others. Thus, the complex (1) may contribute as potential anticancer agent due to its unique interaction mode with DNA.GRAPHICAL ABSTRACT

Communicated by Ramaswamy H. Sarma     

Binding of transition metal ions to albumin: Sites,affinities and rates

Background

Serum albumin is the most abundant protein in the blood and cerebrospinal fluid and plays a fundamental role in the distribution of essential transition metal ions in the human body. Human serum albumin (HSA) is an important physiological transporter of the essential metal ions Cu^2 +, and Zn^2 + in the bloodstream. Its binding of metals like Ni^2 +, Co^2 +, or Cd^2 + can occur in vivo, but is only of toxicological relevance. Moreover, HSA is one of the main targets and hence most studied binding protein for metallodrugs based on complexes with Au, Pt and V.

Scope of Review

We discuss i) the four metal-binding sites so far described on HSA, their localization and metal preference, ii) the binding of the metal ions mentioned above, i.e. their stability constants and association/dissociation rates, their coordination chemistry and their selectivity versus the four binding sites iii) the methodology applied to study issues of items i and ii and iv) oligopeptide models of the N-terminal binding site.

Major Conclusions

Albumin has four partially selective metal binding sites with well-defined metal preferences. It is an important regulator of the blood transport of physiological Cu(II) and Zn(II) and toxic Ni(II) and Cd(II). It is also an important target for metal-based drugs containing Pt(II), V(IV)O, and Au(I).

General Significance

The thorough understanding of metal binding properties of serum albumin, including the competition of various metal ions for specific binding sites is important for biomedical issues, such as new disease markers and design of metal-based drugs. This article is part of a Special Issue entitled Serum Albumin.     

An Effective Lithium Sulfide Encapsulation Strategy for Stable Lithium–Sulfur Batteries

With a high theoretical capacity of 1162 mA h g^?1, Li₂S is a promising cathode that can couple with silicon, tin, or graphite anodes for next‐generation energy storage devices. Unfortunately, Li₂S is highly insulating, exhibits large charge overpotential, and suffers from active‐material loss as soluble polysulfides during battery cycling. To date, low‐cost, scalable synthesis of an electrochemically active Li₂S cathode remains a challenge. This work demonstrates that the low conductivity and material loss issues associated with Li₂S cathodes can be overcome by forming a stable, conductive encapsulation layer at the surface of the Li₂S bulk particles through in situ surface reactions between Li₂S and electrolyte additives containing transition‐metal salts. It is identified that the electronic band structure in the valence band region of the thus‐generated encapsulation layers, consisting largely of transition‐metal sulfides, determines the initial charging resistance of Li₂S. Furthermore, among the transition metals tested, the encapsulation layer formed with an addition of 10 wt% manganese (II) acetylacetonate salt proved to be robust within the cycling window, which is attributed to the chemically generated MnS surface species. This work provides an effective strategy to use micrometer‐sized Li₂S directly as a cathode material and opens up new prospects to tune the surface properties of electrode materials for energy‐storage applications.