Modeling spatial distribution of oxygen in 3d culture of islet beta‐cells

Three‐dimensional (3D) scaffold culture of pancreatic β‐cell has been proven to be able to better mimic physiological conditions in the body. However, one critical issue with culturing pancreatic β‐cells is that β‐cells consume large amounts of oxygen, and hence insufficient oxygen supply in the culture leads to loss of β‐cell mass and functions. This becomes more significant when cells are cultured in a 3D scaffold. In this study, in order to understand the effect of oxygen tension inside a cell‐laden collagen culture on β‐cell proliferation, a culture model with encapsulation of an oxygen‐generator was established. The oxygen‐generator was made by embedding hydrogen peroxide into nontoxic polydimethylsiloxane to avoid the toxicity of a chemical reaction in the β‐cell culture. To examine the effectiveness of the oxygenation enabled 3D culture, the spatial‐temporal distribution of oxygen tension inside a scaffold was evaluated by a mathematical modeling approach. Our simulation results indicated that an oxygenation‐aided 3D culture would augment the oxygen supply required for the β‐cells. Furthermore, we identified that cell seeding density and the capacity of the oxygenator are two critical parameters in the optimization of the culture. Notably, cell‐laden scaffold cultures with an in situ oxygen supply significantly improved the β‐cells' biological function. These β‐cells possess high insulin secretion capacity. The results obtained in this work would provide valuable information for optimizing and encouraging functional β‐cell cultures. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 33:221–228, 2017     

Perfusion enhanced polydimethylsiloxane based scaffold cell culturing system for multi‐well drug screening platform

Conventional two‐dimensional cultures in monolayer and sandwich configuration have been used as a model for in vitro drug testing. However, these culture configurations do not present the actual in vivo liver cytoarchitecture for the hepatocytes cultures and thus they may compromise the cells liver‐specific functions and their cuboidal morphology over longer term culture. In this study, we present a three‐dimensional polydimethylsiloxane (PDMS) scaffold with interconnected spherical macropores for the culturing of rat liver cells (hepatocytes). The scaffolds were integrated into our perfusion enhanced bioreactor to improve the nutrients and gas supply for cell cultures. The liver‐specific functions of the cell culture were assessed by their albumin and urea production, and the changes in the cell morphology were tracked by immunofluorescence staining over 9 days of culture period. N‐Acetyl‐Para‐Amino‐Phenol (acetaminophen) was used as drug model to investigate the response of cells to drug in our scaffold‐bioreactor system. Our experimental results revealed that the perfusion enhanced PDMS‐based scaffold system provides a more conducive microenvironment with better cell‐to‐cell contacts among the hepatocytes that maintains the culture specific enzymatic functions and their cuboidal morphology during the culturing period. The numerical simulation results further showed improved oxygen distribution within the culturing chamber with the scaffold providing an additional function of shielding the cell cultures from the potentially detrimental fluid induced shear stresses. In conclusion, this study could serve a crucial role as a platform for future preclinical hepatotoxicity testing. © 2014 American Institute of Chemical Engineers Biotechnol. Prog., 30:418–428, 2014     

Osteoinduction and survival of osteoblasts and bone-marrow stromal cells in 3D biphasic calcium phosphate scaffolds under static and dynamic culture conditions

In many tissue engineering approaches, the basic difference between in vitro and in vivo conditions for cells within three‐dimensional (3D) constructs is the nutrition flow dynamics. To achieve comparable results in vitro, bioreactors are advised for improved cell survival, as they are able to provide a controlled flow through the scaffold. We hypothesize that a bioreactor would enhance long‐term differentiation conditions of osteogenic cells in 3D scaffolds. To achieve this either primary rat osteoblasts or bone marrow stromal cells (BMSC) were implanted on uniform‐sized biphasic calcium phosphate (BCP) scaffolds produced by a 3D printing method. Three types of culture conditions were applied: static culture without osteoinduction (Group A); static culture with osteoinduction (Group B); dynamic culture with osteoinduction (Group C). After 3 and 6 weeks, the scaffolds were analysed by alkaline phosphatase (ALP), dsDNA amount, SEM, fluorescent labelled live‐dead assay, and real‐time RT‐PCR in addition to weekly alamarBlue assays. With osteoinduction, increased ALP values and calcium deposition are observed; however, under static conditions, a significant decrease in the cell number on the biomaterial is observed. Interestingly, the bioreactor system not only reversed the decreased cell numbers but also increased their differentiation potential. We conclude from this study that a continuous flow bioreactor not only preserves the number of osteogenic cells but also keeps their differentiation ability in balance providing a suitable cell‐seeded scaffold product for applications in regenerative medicine.     

Flow cytometric cell cycle analysis of muscle precursor cells cultured within 3D scaffolds in a perfusion bioreactor

It has been widely demonstrated that perfusion bioreactors improve in vitro three‐dimensional (3D) cultures in terms of high cell density and uniformity of cell distribution; however, the studies reported in literature were primarily based on qualitative analysis (histology, immunofluorescent staining) or on quantitative data averaged on the whole population (DNA assay, PCR). Studies on the behavior, in terms of cell cycle, of a cell population growing in 3D scaffolds in static or dynamic conditions are still absent. In this work, a perfusion bioreactor suitable to culture C₂C₁₂ muscle precursor cells within 3D porous collagen scaffolds was designed and developed and a method based on flowcytometric analyses for analyzing the cell cycle in the cell population was established. Cells were extracted by enzymatic digestion of the collagen scaffolds after 4, 7, and 10 days of culture, and flow cytometric live/dead and cell cycle analyses were performed with Propidium Iodide. A live/dead assay was used for validating the method for cell extraction and staining. Moreover, to investigate spatial heterogeneity of the cell population under perfusion conditions, two stacked scaffolds in the 3D domain, of which only the upstream layer was seeded, were analyzed separately. All results were compared with those obtained from static 3D cultures. The live/dead assay revealed the presence of less than 20% of dead cells, which did not affect the cell cycle analysis. Cell cycle analyses highlighted the increment of cell fractions in proliferating phases (S/G₂/M) owing to medium perfusion in long‐term cultures. After 7–10 days, the percentage of proliferating cells was 8–12% for dynamic cultures and 3–5% for the static controls. A higher fraction of proliferating cells was detected in the downstream scaffold. From a general perspective, this method provided data with a small standard deviation and detected the differences between static and dynamic cultures and between upper and lower scaffolds. Our methodology can be extended to other cell types to investigate the influence of 3D culture conditions on the expression of other relevant cell markers. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2009     

Theoretical analysis of insulin-dependent glucose uptake heterogeneity in 3D bioreactor cell culture

Three-dimensional (3D) cell cultures in bioreactors are becoming relevant as models for biological and physiological in vitro studies. In such systems, mathematical models can assist the experiment design that links the macroscopic properties to single-cell responses. We investigated the relationship between biochemical stimuli and cell response within a 3D cell culture in scaffold with heterogeneous porosity. Specifically, we studied the effect of insulin on the local glucose metabolism as a function of 3D pore size distribution. The multiscale mathematical model combines the mass transport within a 3D scaffold and a signaling pathways model. It considers the scaffold heterogeneity, and it describes spatiotemporal concentration of metabolites, biochemical stimuli, and cell density. The signaling model was integrated into this model, linking the local insulin concentration at cell membrane to the glucose uptake rate through glucose transporter type 4 (GLUT4) translocation from the cytosol to the cell membrane. The integrated model determines the cell response heterogeneities in a single channel, hence the biological response distribution in a 3D system. It also provides macroscopic outcomes to evaluate the feasibility of an experimental measurement of the system response. From our analysis, it became apparent that the flow rate is the most important operative variable, and that an optimum value ensures a fast and detectable cell response. This model on insulin-dependent glucose consumption rate offers insight into the cell metabolism physiology, which is a fundamental requirement for the study metabolic disorder such as Type 2 diabetes mellitus, in which the physiological insulin-dependent glucose metabolism is impaired.     

Coupling curvature-dependent and shear stress-stimulated neotissue growth in dynamic bioreactor cultures: a 3D computational model of a complete scaffold

The main challenge in tissue engineering consists in understanding and controlling the growth process of in vitro cultured neotissues toward obtaining functional tissues. Computational models can provide crucial information on appropriate bioreactor and scaffold design but also on the bioprocess environment and culture conditions. In this study, the development of a 3D model using the level set method to capture the growth of a microporous neotissue domain in a dynamic culture environment (perfusion bioreactor) was pursued. In our model, neotissue growth velocity was influenced by scaffold geometry as well as by flow- induced shear stresses. The neotissue was modeled as a homogenous porous medium with a given permeability, and the Brinkman equation was used to calculate the flow profile in both neotissue and void space. Neotissue growth was modeled until the scaffold void volume was filled, thus capturing already established experimental observations, in particular the differences between scaffold filling under different flow regimes. This tool is envisaged as a scaffold shape and bioprocess optimization tool with predictive capacities. It will allow controlling fluid flow during long-term culture, whereby neotissue growth alters flow patterns, in order to provide shear stress profiles and magnitudes across the whole scaffold volume influencing, in turn, the neotissue growth.     

Three-dimensional cell seeding and growth in radial-flow perfusion bioreactor for in vitro tissue reconstruction

Radial-flow perfusion bioreactor systems have been designed and evaluated to enable direct cell seeding into a three-dimensional (3-D) porous scaffold and subsequent cell culture for in vitro tissue reconstruction. However, one of the limitations of in vitro regeneration is the tissue necrosis that occurs at the central part of the 3-D scaffold. In the present study, tubular poly-L-lactic acid (PLLA) porous scaffolds with an optimized pore size and porosity were prepared by the lyophilization method, and the effect of different perfusion conditions on cell seeding and growth were compared with those of the conventional static culture. The medium flowed radially from the lumen toward the periphery of the tubular scaffolds. It was found that cell seeding under a radial-flow perfusion condition of 1.1 mL/cm2 x min was effective, and that the optimal flow rate for cell growth was 4.0 mL/cm2 x min. At this optimal rate, the increase in seeded cells in the perfusion culture over a period of 5 days was 7.3-fold greater than that by static culture over the same period. The perfusion cell seeding resulted in a uniform distribution of cells throughout the scaffold. Subsequently, the perfusion of medium and hence the provision of nutrients and oxygen permitted growth and maintenance of the tissue throughout the scaffold. The perfusion seeding/culture system was a much more effective strategy than the conventional system in which cells are seeded under a static condition and cultured in a bioreactor such as a spinner flask.     

Tissue Engineering of a Human 3D in vitro Tumor Test System

Cancer is one of the leading causes of death worldwide. Current therapeutic strategies are predominantly developed in 2D culture systems, which inadequately reflect physiological conditions in vivo. Biological 3D matrices provide cells an environment in which cells can self-organize, allowing the study of tissue organization and cell differentiation. Such scaffolds can be seeded with a mixture of different cell types to study direct 3D cell-cell-interactions. To mimic the 3D complexity of cancer tumors, our group has developed a 3D in vitro tumor test system.Our 3D tissue test system models the in vivo situation of malignant peripheral nerve sheath tumors (MPNSTs), which we established with our decellularized porcine jejunal segment derived biological vascularized scaffold (BioVaSc). In our model, we reseeded a modified BioVaSc matrix with primary fibroblasts, microvascular endothelial cells (mvECs) and the S462 tumor cell line. For static culture, the vascular structure of the BioVaSc is removed and the remaining scaffold is cut open on one side (Small Intestinal Submucosa SIS-Muc). The resulting matrix is then fixed between two metal rings (cell crowns).Another option is to culture the cell-seeded SIS-Muc in a flow bioreactor system that exposes the cells to shear stress. Here, the bioreactor is connected to a peristaltic pump in a self-constructed incubator. A computer regulates the arterial oxygen and nutrient supply via parameters such as blood pressure, temperature, and flow rate. This setup allows for a dynamic culture with either pressure-regulated pulsatile or constant flow.In this study, we could successfully establish both a static and dynamic 3D culture system for MPNSTs. The ability to model cancer tumors in a more natural 3D environment will enable the discovery, testing, and validation of future pharmaceuticals in a human-like model.     

Maintenance of pluripotency in mouse embryonic stem cells cultivated in stirred microcarrier cultures

The development of efficient and reproducible culture systems for embryonic stem (ES) cells is an essential pre‐requisite for regenerative medicine. Culture scale‐up ensuring maintenance of cell pluripotency is a central issue, because large amounts of pluripotent cells must be generated to warrant that differentiated cells deriving thereof are transplanted in great amounts and survive the procedure. This study aimed to develop a robust scalable cell expansion system, using a murine embryonic stem cell line that is feeder‐dependent and adapted to serum‐free medium, thus representing a more realistic model for human ES cells. We showed that high concentrations of murine ES cells can be obtained in stirred microcarrier‐based spinner cultures, with a 10‐fold concentration of cells per volume of medium and a 5‐fold greater cell concentration per surface area, as compared to static cultures. No differences in terms of pluripotency and differentiation capability were observed between cells grown in traditional static systems and cells that were replated onto the traditional system after being expanded on microcarriers in the stirred system. This was verified by morphological analyses, quantification of cells expressing important pluripotency markers (Oct‐4, SSEA‐1, and SOX2), karyotype profile, and the ability to form embryoid bodies with similar sizes, and maintaining their intrinsic ability to differentiate into all three germ layers. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2010     

A mathematical model for fluid shear-sensitive 3D tissue construct development

This research studies dynamic culture for 3D tissue construct development with computational fluid dynamics. It proposes a mathematical model to evaluate the impact of flow rates and flow shear stress on cell growth in 3D constructs under perfusion. The modeling results show that dynamic flow, even at flow rate as low as 0.002 cm/s, can support much better mass exchange, higher cell number, and more even cell and nutrient distribution compared to static culture. Higher flow rate can further improve nutrient supply and mass exchange in the construct, promoting better nutritious environment and cell proliferation compared to lower flow rate. In addition, consideration of flow shear stress predicts much higher cell number in the construct compared to that without shear consideration. While the nutrient can dominate shear stress in influencing cell proliferation, the shear effect increases with flow rate. The proposed model helps tissue engineers better understand the cell-flow relationship at the molecular level during dynamic culture.     

Three-dimensional polymeric systems for cancer cell studies

Three-dimensional (3-D) culture of cancer cells and of normal mammalian cells in a polymeric matrix is generally a better alternate model for understanding the regulation of cancer cell proliferation and for evaluation of different anticancer drugs. A substantial amount of evidence demonstrates important differences in the behavior of cells grown in monolayer, i.e., two-dimensional (2-D), and in 3-D cultures. Cancer cells grown in 3-D culture are more resistant to cytotoxic agents than cells in 2-D culture; growth of cells in vitro in 3-D requires a suitable polymer that provides a structural scaffold for cell adhesion and growth. Many naturally derived polymers as well as synthetic polymers have been investigated as scaffolds. The aim of this review is to overview the polymeric materials of natural and synthetic origin that are of specific interest to 3-D cell cultures, and discuss the development of new polymers that should be specifically designed for 3-D culture applications.     

Extent of cell differentiation and capacity for cartilage synthesis in human adult adipose‐derived stem cells: Comparison with fetal chondrocytes

This study evaluated the extent of differentiation and cartilage biosynthetic capacity of human adult adipose‐derived stem cells relative to human fetal chondrocytes. Both types of cell were seeded into nonwoven‐mesh polyglycolic acid (PGA) scaffolds and cultured under dynamic conditions with and without addition of TGF‐β1 and insulin. Gene expression for aggrecan and collagen type II was upregulated in the stem cells in the presence of growth factors, and key components of articular cartilage such as glycosaminoglycan (GAG) and collagen type II were synthesized in cultured tissue constructs. However, on a per cell basis and in the presence of growth factors, accumulation of GAG and collagen type II were, respectively, 3.4‐ and 6.1‐fold lower in the stem cell cultures than in the chondrocyte cultures. Although the stem cells synthesized significantly higher levels of total collagen than the chondrocytes, only about 2.4% of this collagen was collagen type II. Relative to cultures without added growth factors, treatment of the stem cells with TGF‐β1 and insulin resulted in a 59% increase in GAG synthesis, but there was no significant change in collagen production even though collagen type II gene expression was upregulated 530‐fold. In contrast, in the chondrocyte cultures, synthesis of collagen type II and levels of collagen type II as a percentage of total collagen more than doubled after growth factors were applied. Although considerable progress has been achieved to develop differentiation strategies and scaffold‐based culture techniques for adult mesenchymal stem cells, the extent of differentiation of human adipose‐derived stem cells in this study and their capacity for cartilage synthesis fell considerably short of those of fetal chondrocytes. Biotechnol. Bioeng. 2010;107: 393–401. © 2010 Wiley Periodicals, Inc.     

A compact computational model for cell construct development in perfusion culture

A problem nowadays tissue engineers encounter in developing sizable tissue implants is the nonuniform spread of cells and/or extracellular matrices. Research shows such a nutrients transport restriction may be improved by employing hydrodynamic culture systems. We propose a compact model for the simulation of cell growth in a porous construct under direct perfusion. Unlike the previous model proposed in the literature, which composes a cellular scaffold sandwiched between two culture media layers, the current model includes only the scaffold layer to simplify the mathematical and computational complex. Results show the present single-layer model can predict cell spreads and the nutrient and metabolic waste distribution as accurately as does the three-layer model. Only if the hydrodynamic aspects such as the pressure and viscous stress are prominent to know, should the more sophisticated analyses with the three-layer model be employed. The compact model provides comparable investigations for the tissue-engineering construct developments.     

Enhancement of cell growth in tissue-engineering constructs under direct perfusion: Modeling and simulation

Perfusion bioreactors improve mass transfer in cell-scaffold constructs. We developed a mathematical model to simulate nutrient flow through cellular constructs. Interactions among cell proliferation, nutrient consumption, and culture medium circulation were investigated. The model incorporated modified Contois cell-growth kinetics that includes effects of nutrient saturation and limited cell growth. Nutrient uptake was depicted through the Michaelis-Menton kinetics. To describe the culture medium convection, the fluid flow outside the cell-scaffold construct was described by the Navier-Stokes equations, while the fluid dynamics within the construct was modeled by Brinkman's equation for porous media flow. Effects of the media perfusion were examined by including time-dependant porosity and permeability changes due to cell growth. The overall cell volume was considered to consist of cells and extracellular matrices (ECM) as a whole without treating ECM separately. Numerical simulations show when cells were cultured subjected to direct perfusion, they penetrated to a greater extent into the scaffold and resulted in a more uniform spatial distribution. The cell amount was increased by perfusion and ultimately approached an asymptotic value as the perfusion rates increased in terms of the dimensionless Peclet number that accounts for the ratio of nutrient perfusion to diffusion. In addition to enhancing the nutrient delivery, perfusion simultaneously imposes flow-mediated shear stress to the engineered cells. Shear stresses were found to increase with cell growth as the scaffold void space was occupied by the cell and ECM volumes. The macro average stresses increased from 0.2 mPa to 1 mPa at a perfusion rate of 20 microm/s with the overall cell volume fraction growing from 0.4 to 0.7, which made the overall permeability value decrease from 1.35 x 10(-2)cm(2) to 5.51 x 10(-4)cm(2). Relating the simulation results with perfusion experiments in literature, the average shear stresses were below the critical value that would induce the chondrocyte necrosis.     

Evaluation of the new serum-free medium (MDSS2) for the production of different biologicals: Use of various cell lines

The presence of serum in cell culture raises safety problems for the production of biologicals, thus a new serum-free medium (MDSS2) was developed. The evaluation of this medium for the growth of different cell lines (BHK-21 C13, BSR and Vero) has shown that cells grew in this medium similarly to standard serum-containing medium, independently of the culture system used: in static (as monolayer) as well as in agitated systems (in suspension in spinner and perfusion reactors). BHK-21 and BSR cells grew as aggregate cultures and could proliferate in both static and agitated culture systems. Vero cells stayed attached to a substrate and proliferated equally in static and in agitated microcarrier-culture systems. The cell densities obtained with BHK-21 cells depended only on the culture system used. They ranged from 2–3×10⁶ to 6–12×10⁶ cells per ml for static batch and perfusion reactor cultures respectively. The cell concentration was 3 to 6 times higher than in classical cultures performed in serum-containing medium. The cell densities obtained with Vero cells were indistinguishable from those obtained in serum-containing medium, whatever the cell culture system used. These cell lines have been used for the production of rabies virus. With respect to BHK-21 and BSR, similar production rates of rabies glycoprotein have been found as in the standard roller bottle process. The production of rabies virus and of viral glycoprotein by Vero cells cultivated in serum-free medium was augmented 1.5-fold and 2.5-fold, respectively, when compared to serum-containing medium.A recombinant BHK-21 cell line, producing human IL-2, can also proliferate in MDSS2, after addition of insulin. The specific IL-2 production rate was augmented 3–4 fold in comparison to serum-containing medium.For the cells tested, the MDSS2 serum-free medium is a good growth and production medium. Its use for cultivating other cell lines and/or for the production of other biologicals is discussed.     

Distribution of bone-marrow stromal cells in a 3D scaffold depending on the seeding method and the scaffold inside a surface modification

The distribution of bone-marrow stromal cells (BMSC) was studied in 3D polylactide scaffolds. Seeding of cells into the scaffold by the dynamic method (with the aid of a peristaltic pump) has been shown to provide distribution of cells throughout the entire scaffold volume, unlike the static method of seeding, in which the cell suspension is applied onto the scaffold surface. Unlike the cells seeded into the scaffold by the dynamic method, the cells seeded by the static method practically completely migrate from the scaffold on the dish for the first several days. It is revealed that BMSCs cultivated in 3D polylactide scaffolds modified by fibrin form colonies, whereas BMSCs cultivated inside scaffolds modified by collagen type 1 distribute all over the scaffold volume in the form of individual cells.     

造血细胞体外悬浮培养和生物反应器开发

为解决造血细胞的静态培养中由浓度梯度引起的培养不稳定、环境不均一、难放大等问题,首先采用转瓶对脐血单个核细胞进行了悬浮培养研究,结果表明,悬浮培养中总细胞、集落和CD34^＋细胞的扩增都高于静态的方瓶培养。在测试了所用材料生物相容性的基础上,开发了可以控制溶氧和pH的生物反应器,并将其应用到造血细胞的批培养中,结果表明反应器的培养环境均一,可实现较高密度的培养,而且总细胞、集落和CD34^＋细胞的扩增都优于静态培养。大规模的反应器培养有利于解决临床应用中细胞数量不足的问题。     

Serum‐free scaled up expansion and differentiation of murine embryonic stem cells to osteoblasts in suspension bioreactors

The use of embryonic stem cell (ESC) derived cells has emerged as a potential alternative treatment for a number of degenerative diseases, including musculoskeletal diseases. Conventional ESC culturing methods use fetal bovine serum (FBS) as a major supplemental component of culture media, which is undesirable for clinical applications. These cultures are usually performed in small‐scale static vessels (gelatin‐coated dishes), which limit the number of cells that can be generated. It is essential to develop effective, reproducible protocols for efficient scalable production of ESC‐derived cells. Here we present serum‐free bioreactor protocols for (1) expansion and (2) differentiation of embryonic stem cells to osteoblasts. Cultivation of mESCs in serum‐free media, supplemented with 15% knockout serum replacement (KSR) resulted in a 27.1‐ and 48.6‐fold expansion in static culture and suspension respectively by day 5 of culture. Further induction to osteoblasts with a differentiation cocktail was verified by up‐regulation of osterix and osteocalcin. Mineralization was also enhanced, as indicated by an increase in the calcium deposition by osteogenic cells by day 28. These results will serve as the basis for developing protocols with human ESCs as a new treatment alternative for musculoskeletal diseases. Biotechnol. Bioeng. 2010;106: 829–840. © 2010 Wiley Periodicals, Inc.     

TGFβ (transforming growth factor β) and keratocyte motility in 24 h zebrafish explant cultures

Fish keratocytes are used as a model system for the study of the mechanics of cell motility because of their characteristic rapid, smooth gliding motion, but little work has been done on the regulation of fish keratocyte movement. As TGFβ (transforming growth factor β) plays multiple roles in primary human keratinocyte cell migration, we investigated the possible involvement of TGFβ in fish keratocyte migration. Studying the involvement of TGFβ1 in 24 h keratocyte explant allows the examination of the cells before alterations in cellular physiology occur due to extended culture times. During this initial period, TGFβ levels increase 6.2‐fold in SFM (serum‐free medium) and 2.4‐fold in SFM+2% FBS (fetal bovine serum), while TGFβ1 and TGFβRII (TGFβ receptor II) mRNA levels increase ～3‐ and ～5‐fold respectively in each culture condition. Two measures of motility, cell sheet area and migration distance, vary with the amount of exogenous TGFβ1 and culture media. The addition of 100 ng/ml exogenous TGFβ1 in SFM increases both measures [3.3‐fold (P=4.5 × 10^?5) and 26% (P=2.1 × 10^?2) respectively]. In contrast, 100 ng/ml of exogenous TGFβ1 in medium containing 2% FBS decreases migration distance by 2.1‐fold (P=1.7 × 10^?7), but does not affect sheet area. TGFβ1 (10 ng/ml) has little effect on cell sheet area in SFM cultures, but leads to a 1.8‐fold increase (P=1.5 × 10^?2) with 2% FBS. The variable response to TGFβ1 may be, at least in part, explained by the effect of 2% FBS on cell morphology, mode of motility and expression of endogenous TGFβ1 and TGFβRII. Together, these results suggest that expression of TGFβ and its receptor are up‐regulated during zebrafish keratocyte explant culture and that TGFβ promotes fish keratocyte migration.     

人皮肤成纤维细胞在不同培养系统中的生长代谢特性

大面积烧伤病人及多种皮肤溃疡病人很难用自体皮肤移植来进行治疗.早期治疗方法采用尸体来源的皮肤移植,但由于来源有限、且有传播疾病的危险,因此应用组织工程技术构建生物活性人工皮肤已成为近十几年来在组织工程和创伤治疗领域的研究热点,目前已有几种人工皮肤成功地走向临床[1].然而,在构建大面积皮肤组织过程中,如何大量制备皮肤种子细胞仍然是一大棘手的难题,成为人体皮肤组织工程迫切需要解决的技术关键.获得大量扩增的皮肤细胞,解决种子细胞的供应问题,是构建人工皮肤的一个关键.