The role of short-range Cys171-Cys178 disulfide bond in maintaining cutinase active site integrity: A molecular dynamics simulation

Understanding structural determinants in enzyme active site integrity can provide a good knowledge to design efficient novel catalytic machineries. Fusarium solani pisi cutinase with classic triad Ser-His-Asp is a promising enzyme to scrutinize these structural determinants. We performed two MD simulations: one, with the native structure, and the other with the broken Cys171-Cys178 disulfide bond. This disulfide bond stabilizes a turn in active site on which catalytic Asp175 is located. Functionally important H-bonds and atomic fluctuations in catalytic pocket have been changed. We proposed that this disulfide bond within active site can be considered as an important determinant of cutinase active site structural integrity.     

Expression of an Aspergillus niger Phytase Gene (phyA) in Saccharomyces cerevisiae

Phytase improves the bioavailability of phytate phosphorus in plant foods to humans and animals and reduces phosphorus pollution of animal waste. Our objectives were to express an Aspergillus niger phytase gene (phyA) in Saccharomyces cerevisiae and to determine the effects of glycosylation on the phytase’s activity and thermostability. A 1.4-kb DNA fragment containing the coding region of the phyA gene was inserted into the expression vector pYES2 and was expressed in S. cerevisiae as an active, extracellular phytase. The yield of total extracellular phytase activity was affected by the signal peptide and the medium composition. The expressed phytase had two pH optima (2 to 2.5 and 5 to 5.5) and a temperature optimum between 55 and 60°C, and it cross-reacted with a rabbit polyclonal antibody against the wild-type enzyme. Due to the heavy glycosylation, the expressed phytase had a molecular size of approximately 120 kDa and appeared to be more thermostable than the commercial enzyme. Deglycosylation of the phytase resulted in losses of 9% of its activity and 40% of its thermostability. The recombinant phytase was effective in hydrolyzing phytate phosphorus from corn or soybean meal in vitro. In conclusion, the phyA gene was expressed as an active, extracellular phytase in S. cerevisiae, and its thermostability was affected by glycosylation.     

Stable expression of Phytase (phyA) in canola (Brassica napus) seeds: towards a commercial product

TheAspergillus niger gene encoding phytase(phyA) was expressed in canola (Brassicanapus). Phytase expression is controlled by the seed-specificcruciferin (CruA) promoter. Secretion of the enzyme was aimed for byincorporating the cruciferin signal peptide in the expression construct.Transgenic canola lines were generated by Agrobacteriummediated transformation using nptII as the selectable marker. Ninety-fiveindependent transgenic events were generated. Phytase expression in the T1seedsranged from 0 to 600 U/g seed. Single-copy lines were selected(based on segregation for kanamycin resistance, phytase expression and Southernanalyses) from originally multi-copy transgenic lines. Phytase was expressed inthese sub-lines up to 103 U/g. Expression levels were monitoredthrough an additional 3–4 generations (in the greenhouse and in thefield)and the accumulation of phytase appeared to be fairly stable. In the expressionrange studied, phytase expression was gene-dosage dependent.     

Influence of disulfide bonds on the conformational changes and activities of refolded phytase

Aspergillus sp. phytase contains five disulfide bonds. In order to elucidate their role, the reactivation and refolding of phytase in the absence and presence of dithiothreitol (DTT) was investigated. The results indicated that the disulfide bonds play an important role in the catalytic activity and conformational stability of the enzyme.     

Biochemical Characterization of Fungal Phytases (myo-Inositol Hexakisphosphate Phosphohydrolases): Catalytic Properties

Supplementation with phytase is an effective way to increase the availability of phosphorus in seed-based animal feed. The biochemical characteristics of an ideal phytase for this application are still largely unknown. To extend the biochemical characterization of wild-type phytases, the catalytic properties of a series of fungal phytases, as well as Escherichia coli phytase, were determined. The specific activities of the fungal phytases at 37°C ranged from 23 to 196 U · (mg of protein)⁻¹, and the pH optima ranged from 2.5 to 7.0. When excess phytase was used, all of the phytases were able to release five phosphate groups of phytic acid (myo-inositol hexakisphosphate), which left myo-inositol 2-monophosphate as the end product. A combination consisting of a phytase and Aspergillus niger pH 2.5 acid phosphatase was able to liberate all six phosphate groups. When substrate specificity was examined, the A. niger, Aspergillus terreus, and E. coli phytases were rather specific for phytic acid. On the other hand, the Aspergillus fumigatus, Emericella nidulans, and Myceliophthora thermophila phytases exhibited considerable activity with a broad range of phosphate compounds, including phenyl phosphate, p-nitrophenyl phosphate, sugar phosphates, α- and β-glycerophosphates, phosphoenolpyruvate, 3-phosphoglycerate, ADP, and ATP. Both phosphate liberation kinetics and a time course experiment in which high-performance liquid chromatography separation of the degradation intermediates was used showed that all of the myo-inositol phosphates from the hexakisphosphate to the bisphosphate were efficiently cleaved by A. fumigatus phytase. In contrast, phosphate liberation by A. niger or A. terreus phytase decreased with incubation time, and the myo-inositol tris- and bisphosphates accumulated, suggesting that these compounds are worse substrates than phytic acid is. To test whether broad substrate specificity may be advantageous for feed application, phosphate liberation kinetics were studied in vitro by using feed suspensions supplemented with 250 or 500 U of either A. fumigatus phytase or A. niger phytase (Natuphos) per kg of feed. Initially, phosphate liberation was linear and identical for the two phytases, but considerably more phosphate was liberated by the A. fumigatus phytase than by the A. niger phytase at later stages of incubation.     

Biochemical characterisation of extracellular phytase (myo-inositol hexakisphosphate phosphohydrolase) from a hyper-producing strain of Aspergillus niger van Teighem

Aspergillus niger van Teighem, isolated in our laboratory from samples of rotten wood logs, produced extracellular phytase having a high specific activity of 22,592 units (mg protein)^–1 . The enzyme was purified to near homogeneity using ion-exchange and gel-filtration chromatography. The molecular properties of the purified enzyme suggested the native phytase to be oligomeric, with a molecular weight of 353 kDa, the monomer being 66 kDa. The purified enzyme exhibited maximum activity at pH 2.5 and 52–55°C. The enzyme retained 97% activity after a 24-h incubation at 55°C in the presence of 10 mM glycine, while 87% activity was retained when no thermoprotectant was added. Phytase activity was not affected by most metal ions, inhibitors and organic solvents. Non-ionic and cationic detergents (0.1–5%) stabilise the enzyme, while the anionic detergent (SDS), even at a 0.1% level, severely inhibited enzyme activity. The chaotropic agents guanidinium hydrochloride, urea, and potassium iodide (0.5–8 M), significantly affected phytase activity. The maximum hydrolysis rate (V_max) and apparent Michaelis-Menten constant (K_m) were 1,074 IU/mL and 606 M, respectively, with a catalytic turnover number of 3×10⁵ s^–1 and catalytic efficiency of 3.69×10⁸ M^–1 s^–1.     

Phytase isozymes from Aspergillus niger NCIM 563 under solid state fermentation: Biochemical characterization and their correlation with submerged phytases

Aspergillus niger NCIM 563 produces dissimilar phytase isozymes under solid state and submerged fermentation conditions. Biochemical characterization and applications of phytase Phy III and Phy IV in SSF and their comparison with submerged fermentation Phy I and Phy III were studied. SSF phytases have a higher metabolic potential as compared to SmF. Phy I is tetramer and Phy II, III and IV are monomers. Phy I and IV have pH optima of 2.5 and Phy II and III have pH optima of 5.0 and 5.6, respectively. Phy I, III and IV exhibited very broad substrate specificity while Phy II was more specific for sodium phytate. SSF phytase is less thermostable as compared to SmF phytase. Phy I and II show homology with other known phytases while Phy III and IV show no homology with SmF phytases and any other known phytases from the literature suggesting their unique nature. This is the first report about differences among phytase produced under SSF and SmF by A. niger and this study provides basis for explanation of the stability and catalytic differences observed for these enzymes. Exclusive biochemical characteristics and multilevel application of SSF native phytases determine their efficacy and is exceptional.     

Comparison of the Thermostability Properties of Three Acid Phosphatases from Molds: Aspergillus fumigatus Phytase, A. niger Phytase, and A. niger pH 2.5 Acid Phosphatase

Enzymes that are used as animal feed supplements should be able to withstand temperatures of 60 to 90°C, which may be reached during the feed pelleting process. The thermostability properties of three histidine acid phosphatases, Aspergillus fumigatus phytase, Aspergillus niger phytase, and A. niger optimum pH 2.5 acid phosphatase, were investigated by measuring circular dichroism, fluorescence, and enzymatic activity. The phytases of A. fumigatus and A. niger were both denatured at temperatures between 50 and 70°C. After heat denaturation at temperatures up to 90°C, A. fumigatus phytase refolded completely into a nativelike, fully active conformation, while in the case of A. niger phytase exposure to 55 to 90°C was associated with an irreversible conformational change and with losses in enzymatic activity of 70 to 80%. In contrast to these two phytases, A. niger pH 2.5 acid phosphatase displayed considerably higher thermostability; denaturation, conformational changes, and irreversible inactivation were observed only at temperatures of ≥80°C. In feed pelleting experiments performed at 75°C, the recoveries of the enzymatic activities of the three acid phosphatases were similar (63 to 73%). At 85°C, however, the recovery of enzymatic activity was considerably higher for A. fumigatus phytase (51%) than for A. niger phytase (31%) or pH 2.5 acid phosphatase (14%). These findings confirm that A. niger pH 2.5 acid phosphatase is irreversibly inactivated at temperatures above 80°C and that the capacity of A. fumigatus phytase to refold properly after heat denaturation may favorably affect its pelleting stability.     

Biochemical characteristics of phytases from fungi and the transformed microorganism

Five sources of phytases were used to study their biochemical characteristics. Phytase E was from an original Escherichia coli (E. coli), phytase PI and PG from the transformed Pichia pastoris (P. pastoris) with phytase gene of E. coli, phytase B and R from Aspergillus niger (A. niger). The results showed that the relative phytase activities had no significant changes when temperature was below 60 °C (P>0.05), and then decreased significantly with temperature increasing (P<0.01). The fungal phytase with the phytase gene from A. niger had the higher thermostability than the bacterial phytase with the phytase gene from E. coli; i.e. at 70 °C, 27–58% of phytase activity (compared with 30 °C) was retained for the bacterial phytase, and 73–96% for the fungal phytase; at 90 °C, 20–47% was retained for the bacterial phytase, and 41–52% for the fungal phytase, especially for the most thermostable phytase R (P<0.01). The optimum pH ranges were 3.0–4.5 for the bacterial phytases and 5.0–5.5 for the fungal phytases (P<0.01). When pH levels were 1, 7 and 8, only 3–7% of phytase activity (compared with the maximum phytase activity at a pH point) was retained for both bacterial and fungal phytases. The amount of inorganic P released from soybean meal was significantly increased when the levels of phytase activity in the soybean meal increased from 0 to 1.0 U/g soybean meal (P<0.01), except for phytase PI. The maximum P released was obtained at 1 U/g soybean meal for all five kinds of phytases (P<0.01). The most economical phytase concentration for P released was 0.25 U/g for phytase PI and B, and 0.50–1.0 U/g for phytase PG, E and R. In addition, the linear and non-linear regression models were established to estimate phytase activity and its characteristics very easily and economically.     

The role of disulfide bonds in the conformational stability and catalytic activity of phytase.

Previous studies have predicted five disulfide bonds in Aspergillus niger phytase (phy A). To investigate the role of disulfide bonds, intrinsic fluorescence spectra, far-ultraviolet circular dichroism (CD) spectra, and an enzyme activity assay were used to compare the differences of catalytic activity and conformational stability of phytase during denaturation in urea in the presence and absence of dithiothreitol (DTT). In the presence of 2 mM DTT, the inactivation and unfolding were greatly enhanced at the same concentration of denaturant. The fluorescence emission maximum red shift and decreases of ellipticity at 222 nm were in accord with the changes of catalytic activity. The kinetics of the unfolding courses were a biphasic process consisting of two first-order reactions in the absence of DTT and a monophasic process of a first-order reaction in the presence of DTT. The results suggested that the loss of enzymatic activity was most likely because of a conformational change, and that disulfide bonds played an important role in three-dimensional structure and catalytic activity.     

Understanding Thermostability Factors of <Emphasis Type="Italic">Aspergillus niger</Emphasis> PhyA Phytase: A Molecular Dynamics Study

Molecular dynamics simulation was used to study the dynamic differences between native Aspergillus niger PhyA phytase and a mutant with 20 % greater thermostability. Atomic root mean square deviation, radius of gyration, and number of hydrogen bonds and salt bridges are examined to determine thermostability factors. The results suggest that, among secondary structure elements, loops have the most impact on the thermal stability of A. niger phytase. In addition, the location rather than the number of hydrogen bonds is found to have an important contribution to thermostability. The results also show that salt bridges may have stabilizing or destabilizing effect on the enzyme and influence its thermostability accordingly.     

Monitoring fermentation parameters during phytase production in column-type bioreactor using a new data acquisition system

Fermentation parameters for phytase production in column-type bioreactor were monitored using a new data acquisition system. There are a number of studies reporting phytase production in flasks, but a lack of data about microorganism respiration behaviour during phytase production using column bioreactor. The objectives of this work were the monitoration of fermentation parameters during phytase production and its relation with fungal growth and forced air. Phytase production by A. niger FS3 increased with forced air. The O₂ consumption and CO₂ production during solid-state fermentation were monitored by sensors (in the bottom and top of the columns) linked to controllers, recorded by acquisition software and processed by Fersol2^® software tool. Phytase synthesis was associated with fungal growth. Therefore, phytase could be used to estimate FS3 biomass formed in citric pulp degradation.     

Adjusting force distributions in functional site of scorpion toxin BMK M1 by cooperative effect of disulfide bonds

We decided to investigate the influence of the presence of disulfide bonds on the pattern of force distribution in the functional site of scorpion toxin BMK M1 in its functional state. Therefore, a series of short time molecular dynamics (MD) simulations were performed on this toxin in the native state and disulfide bond broken states. The comparison of disulfide bond broken states with the native state showed that the electrostatic potential energy of important functional residues in the reverse turn and C-terminal regions were modulated by the cooperative effect of all disulfide bonds in the molecule. Furthermore, our results revealed that disulfide bonds also play a cooperative role in modulating (1) the amplitude of the fluctuations of the functional segments and (2) the correlation of motions between important functional residue pairs in this toxin. Therefore, we can conclude that the disulfide bonds have cooperation to adjust the pattern of force distribution in the functional site of this toxin in its functional state.     

Dynamics and thermodynamic properties of CXCL7 chemokine

Chemokines form a family of signaling proteins mainly responsible for directing the traffic of leukocytes, where their biological activity can be modulated by their oligomerization state. We characterize the dynamics and thermodynamic stability of monomer and homodimer structures of CXCL7, one of the most abundant platelet chemokines, using experimental methods that include circular dichroism (CD) and nuclear magnetic resonance (NMR) spectroscopy, and computational methods that include the anisotropic network model (ANM), molecular dynamics (MD) simulations and the distance constraint model (DCM). A consistent picture emerges for the effects of dimerization and Cys5‐Cys31 and Cys7‐Cys47 disulfide bonds formation. The presence of disulfide bonds is not critical for maintaining structural stability in the monomer or dimer, but the monomer is destabilized more than the dimer upon removal of disulfide bonds. Disulfide bonds play a key role in shaping the characteristics of native state dynamics. The combined analysis shows that upon dimerization flexibly correlated motions are induced between the 30s and 50s loop within each monomer and across the dimer interface. Interestingly, the greatest gain in flexibility upon dimerization occurs when both disulfide bonds are present, and the homodimer is least stable relative to its two monomers. These results suggest that the highly conserved disulfide bonds in chemokines facilitate a structural mechanism that is tuned to optimally distinguish functional characteristics between monomer and dimer. Proteins 2015; 83:1987–2007. © 2015 Wiley Periodicals, Inc.     

Secretion of active recombinant phytase from soybean cell-suspension cultures.

Phytase, an enzyme that degrades the phosphorus storage compound phytate, has the potential to enhance phosphorus availability in animal diets when engineered into soybean (Glycine max) seeds. The phytase gene from Aspergillus niger was inserted into soybean transformation plasmids under control of constitutive and seed-specific promoters, with and without a plant signal sequence. Suspension cultures were used to confirm phytase expression in soybean cells. Phytase mRNA was observed in cultures containing constitutively expressed constructs. Phytase activity was detected in the culture medium from transformants that received constructs containing the plant signal sequence, confirming expectations that the protein would follow the default secretory pathway. Secretion also facilitated characterization of the biochemical properties of recombinant phytase. Soybean-synthesized phytase had a lower molecular mass than did the fungal enzyme. However, deglycosylation of the recombinant and fungal phytase yielded polypeptides of identical molecular mass (49 kD). Temperature and pH optima of the recombinant phytase were indistinguishable from the commercially available fungal phytase. Thermal inactivation studies of the recombinant phytase suggested that the additional protein stability would be required to withstand the elevated temperatures involved in soybean processing.     

Site-directed mutagenesis of disulfide bridges in Aspergillus niger NRRL 3135 phytase (PhyA), their expression in Pichia pastoris and catalytic characterization

Earlier studies have established the importance of five disulfide bridges (DBs) in Aspergillus niger phytase. In this study, the relative importance of each of the individual disulfide bridge is determined by its removal by site-directed mutagenesis of specific cysteines in the cloned A. niger phyA gene. Individually, these mutant phytases were expressed in a Pichia expression system and their product purified and characterized. The removal of disulfide bridge 2 yielded a mutant phytase with a complete loss of catalytic activity. The other disulfide mutants displayed a broad array of altered catalytic properties including a lower optimum temperature from 58°C to 53°C for bridge number 1, 37°C for bridge number 3 and 4, and 42°C for bridge number 5. The pH versus activity profile was also modified in the DB mutants. The pH profile of the wild-type phytase was modified by the DB mutations. In bridge number 1, 3, and 4, the second peak at pH 2.5 was abolished, and in bridge number 5, the peak at pH 5.0 was abolished completely leaving only the pH 2.5. While the K _m was not affected drastically, the turnover number was lowered significantly in bridge number 3, 4, and 5.     

Site-directed mutagenesis of an alkaline phytase: influencing specificity, activity and stability in acidic milieu

Site-directed mutagenesis of a thermostable alkaline phytase from Bacillus sp. MD2 was performed with an aim to increase its specific activity and activity and stability in an acidic environment. The mutation sites are distributed on the catalytic surface of the enzyme (P257R, E180N, E229V and S283R) and in the active site (K77R, K179R and E227S). Selection of the residues was based on the idea that acid active phytases are more positively charged around their catalytic surfaces. Thus, a decrease in the content of negatively charged residues or an increase in the positive charges in the catalytic region of an alkaline phytase was assumed to influence the enzyme activity and stability at low pH. Moreover, widening of the substrate-binding pocket is expected to improve the hydrolysis of substrates that are not efficiently hydrolysed by wild type alkaline phytase. Analysis of the phytase variants revealed that E229V and S283R mutants increased the specific activity by about 19% and 13%, respectively. Mutation of the active site residues K77R and K179R led to severe reduction in the specific activity of the enzyme. Analysis of the phytase mutant-phytate complexes revealed increase in hydrogen bonding between the enzyme and the substrate, which might retard the release of the product, resulting in decreased activity. On the other hand, the double mutant (K77R-K179R) phytase showed higher stability at low pH (pH 2.6-3.0). The E227S variant was optimally active at pH 5.5 (in contrast to the wild type enzyme that had an optimum pH of 6) and it exhibited higher stability in acidic condition. This mutant phytase, displayed over 80% of its initial activity after 3 h incubation at pH 2.6 while the wild type phytase retained only about 40% of its original activity. Moreover, the relative activity of this mutant phytase on calcium phytate, sodium pyrophosphate and p-nitro phenyl phosphate was higher than that of the wild type phytase.     

Physicochemical Properties Analysis and Secretome of Aspergillus niger in Fermented Rapeseed Meal

The nutrient digestibility and feeding value of rapeseed meal (RSM) for non-ruminant animals is poor due to the presence of anti-nutritional substances such as glucosinolate, phytic acid, crude fiber etc. In the present study, a solid state fermentation (SSF) using Aspergillus niger was carried out with the purpose of improving the nutritional quality of RSM. The chemical composition and physicochemical properties of RSM before and after fermentation were compared. To further understand possible mechanism of solid state fermentation, the composition of extracellular enzymes secreted by Aspergillus niger during fermentation was analysed using two-dimentional difference gel electrophoresis (2D-DIGE) combined with matrix assisted laser desorption ionization—time of flight—mass spectrometer (MALDI-TOF-MS). Results of the present study indicated that SSF had significant effects on chemical composition of RSM. The fermented rapeseed meal (FRSM) contained more crude protein (CP) and amino acid (AA) (except His) than unfermented RSM. Notably, the small peptide in FRSM was 2.26 time larger than that in unfermented RSM. Concentrations of anti-nutritional substrates in FRSM including neutral detergent fiber (NDF), glucosinolates, isothiocyanate, oxazolidithione, and phytic acid declined (P < 0.05) by 13.47, 43.07, 55.64, 44.68 and 86.09%, respectively, compared with unfermented RSM. A. niger fermentation disrupted the surface structure, changed macromolecular organic compounds, and reduced the protein molecular weights of RSM substrate. Total proteins of raw RSM and FRSM were separated and 51 protein spots were selected for mass spectrometry according to 2D-DIGE map. In identified proteins, there were 15 extracellular hydrolases secreted by A. niger including glucoamylase, acid protease, beta-glucanase, arabinofuranosidase, xylanase, and phytase. Some antioxidant related enzymes also were identified. These findings suggested that A. niger is able to secrete many extracellular degradation enzymes (especially lignocellulosic hydrolyzing enzymes, acid proteases and phytase) during fermentation of RSM, thus altering chemical composition and physicochemical properties of RSM.     

Screening of phytase producers and optimization of culture conditions for submerged fermentation

Phytase (myo-inositol-hexakisphosphate phosphohydrolase) is an enzyme, which breaks down phytate to inositol and orthophosphoric acid. Phytase has been used as feed additive, and in some medical applications for years. To date, phytase production has been usually performed as a solid-state fermentation with small production volumes. Therefore, the aim of this study was to increase the phytase activity in submerged fermentations by screening several microorganism strains based on the literature to select the most productive phytase producer and optimizing growth parameters such as temperature, pH, and aeration level using response surface methodology (RSM). As a result, among the four different microorganisms evaluated, Aspergillus ficuum (NRRL 3135) was selected as the most productive strain. Optimum temperature, pH, and aeration values were determined as 33 °C, 4.5, and 0.9 vvm, respectively, for A. ficuum in 2-l batch submerged phytase productions. Under these conditions, phytase activity was measured as 2.27 U/ml. Therefore, this is a unique study showing the production of phytase with A. ficuum successfully in submerged fermentation as opposed to the traditional solid-state fermentation.