Dichotomy of eutherian reproduction and metabolism

How anatomical, physiological and ecological (life history) features scale with body mass is a fundamental question in biology. There is an ongoing debate in the scientific literature whether allometric scaling follows a universal pattern that can be described in a single model, or differs between groups. However, recently some analyses were published demonstrating a change in scaling across the body mass range: brain‐size allometry of mammals indicates that scaling follows a curvilinear pattern in double‐logarithmic space, and a quadratic pattern in double‐logarithmic space was found in one of the largest physiological datasets, on basal metabolic rate (MR) in mammals. Here, we analysed a variety of independent datasets on anatomical, physiological and ecological characteristics in mammals, birds and reptiles to answer the question whether the quadratic scaling is a universal biological law, or a pattern unique to mammals. The pattern was present in mammalian basal and field MR, brain size, and reproduction parameters, but neither in other organ allometries in mammals, nor in the scaling of MR in birds and reptiles. However, the curvature was better explained by separate allometric scaling of three different mammalian reproduction strategies: marsupials, and eutherian mammals with one and with many offspring. The two latter strategies are distributed unequally over the body mass range in eutherian mammals. Our findings show that a quadratic model, as well as a traditional allometric model with a universal scaling exponent (such as 0.67 or 0.75), may be inappropriate in mammals as they are a result of different scalings within these three reproductive groups. We propose that the observed distribution pattern is the result of the eutherian mammal clade's uniquely pronounced dichotomy of reproductive strategies.     

Many ways to be small: different environmental regulators of size generate distinct scaling relationships in Drosophila melanogaster

Static allometries, the scaling relationship between body and trait size, describe the shape of animals in a population or species, and are generated in response to variation in genetic or environmental regulators of size. In principle, allometries may vary with the different size regulators that generate them, which can be problematic since allometric differences are also used to infer patterns of selection on morphology. We test this hypothesis by examining the patterns of scaling in Drosophila melanogaster subjected to variation in three environmental regulators of size: nutrition, temperature and rearing density. Our data indicate that different environmental regulators of size do indeed generate different patterns of scaling. Consequently, flies that are ostensibly the same size may have very different body proportions. These data indicate that trait size is not simply a read-out of body size, but that different environmental factors may regulate body and trait size, and the relationship between the two, through different developmental mechanisms. It may therefore be difficult to infer selective pressures that shape scaling relationships in a wild population without first elucidating the environmental and genetic factors that generate size variation among members of the population.     

Coevolution of body size and metabolic rate in vertebrates: a life‐history perspective

Despite many decades of research, the allometric scaling of metabolic rates (MRs) remains poorly understood. Here, we argue that scaling exponents of these allometries do not themselves mirror one universal law of nature but instead statistically approximate the non‐linearity of the relationship between MR and body mass. This ‘statistical’ view must be replaced with the life‐history perspective that ‘allows’ organisms to evolve myriad different life strategies with distinct physiological features. We posit that the hypoallometric allometry of MRs (mass scaling with an exponent smaller than 1) is an indirect outcome of the selective pressure of ecological mortality on allocation ‘decisions’ that divide resources among growth, reproduction, and the basic metabolic costs of repair and maintenance reflected in the standard or basal metabolic rate (SMR or BMR), which are customarily subjected to allometric analyses. Those ‘decisions’ form a wealth of life‐history variation that can be defined based on the axis dictated by ecological mortality and the axis governed by the efficiency of energy use. We link this variation as well as hypoallometric scaling to the mechanistic determinants of MR, such as metabolically inert component proportions, internal organ relative size and activity, cell size and cell membrane composition, and muscle contributions to dramatic metabolic shifts between the resting and active states. The multitude of mechanisms determining MR leads us to conclude that the quest for a single‐cause explanation of the mass scaling of MRs is futile. We argue that an explanation based on the theory of life‐history evolution is the best way forward.     

Developmental constraints on the evolution of wing-body allometry in Manduca sexta

Artificial selection on body size in Manduca sexta produced genetic strains with large and small body sizes. The wing-body allometries of these strains differed significantly from the wild type. Selection on small body size led to a change in the scaling of wing and body size without changing the allometry: the wings were smaller relative to the body, but to the same degree at all body sizes. Selection for large body size led to a change in allometry with a decrease in the allometric coefficient, wing size becoming progressively smaller relative to body as body size increased. When larvae were deprived of food so as to produce adults of a range of small body sizes, all strains retained the same allometric coefficient but showed an increase in the scaling factor. Thus individuals starved as larvae had a smaller adult body size but had proportionally larger wings than fed individuals. We analyzed the developmental processes that could give rise to this pattern of allometries. Differences in the relative growth of body and wing disks can account for the differences in the allometric coefficients among the three body size strains. The change in wing-body allometry at large body sizes was primarily due to an insufficient time period for growth. The available time period for growth of the wing imaginal disks poses a significant constraint on the proportional growth of wings, and thus on the evolution of large body size.     

Variation in the ontogenetic allometry of horn length in bovids along a body mass continuum

Allometric relationships describe the proportional covariation between morphological, physiological, or life‐history traits and the size of the organisms. Evolutionary allometries estimated among species are expected to result from species differences in ontogenetic allometry, but it remains uncertain whether ontogenetic allometric parameters and particularly the ontogenetic slope can evolve. In bovids, the nonlinear evolutionary allometry between horn length and body mass in males suggests systematic changes in ontogenetic allometry with increasing species body mass. To test this hypothesis, we estimated ontogenetic allometry between horn length and body mass in males and females of 19 bovid species ranging from ca. 5 to 700 kg. Ontogenetic allometry changed systematically with species body mass from steep ontogenetic allometries over a short period of horn growth in small species to shallow allometry with the growth period of horns matching the period of body mass increase in the largest species. Intermediate species displayed steep allometry over long period of horn growth. Females tended to display shallower ontogenetic allometry with longer horn growth compared to males, but these differences were weak and highly variable. These findings show that ontogenetic allometric slope evolved across species possibly as a response to size‐related changes in the selection pressures acting on horn length and body mass.     

Does allometry account for shape variability in <Emphasis Type="Italic">Ephedrus persicae</Emphasis> Froggatt (Hymenoptera: Braconidae: Aphidiinae) parasitic wasps?

We analysed linear measurements on various parts of the body and the configuration of 11 landmarks on the wing in a large sample of Ephedrus persicae that had emerged from 13 aphid host species, to assess whether static allometry (a measure of the scaling relationship between traits in a population of individuals at the same ontogenetic stage) accounts for variation in body shape. The analysed specimens came from several localities in Europe, Asia Minor, Japan and South America, and cover a large portion of the distribution area of E. persicae. We found that allometry accounts for variation in body shape among different biotypes within the E. persicae group. The allometric slopes for head size (HD), petiolus width (PETW), mesoscutum width (MSC), and ovipositor sheath length (OVPL) diverged significantly among biotypes, indicating biotype-specific allometries. The analysis of allometric variation in wing shape showed that the pattern and direction of allometric changes also differed among individuals that had emerged from different hosts. Our results (observed divergences in the directions of allometric slopes of particular morphometric traits and wing shape) suggest that allometric relations within E. persicae are not conserved, so that allometry itself changes, evolving differently in aphid parasitoids that emerge from different hosts.     

Genetic variation in pleiotropy: differential epistasis as a source of variation in the allometric relationship between long bone lengths and body weight

Pleiotropy is an aspect of genetic architecture underlying the phenotypic covariance structure. The presence of genetic variation in pleiotropy is necessary for natural selection to shape patterns of covariation between traits. We examined the contribution of differential epistasis to variation in the intertrait relationship and the nature of this variation. Genetic variation in pleiotropy was revealed by mapping quantitative trait loci (QTLs) affecting the allometry of mouse limb and tail length relative to body weight in the mouse-inbred strain LG/J by SM/J intercross. These relationship QTLs (rQTLs) modify relationships between the traits affected by a common pleiotropic locus. We detected 11 rQTLs, mostly affecting allometry of multiple bones. We further identified epistatic interactions responsible for the observed allometric variation. Forty loci that interact epistatically with the detected rQTLs were identified. We demonstrate how these epistatic interactions differentially affect the body size variance and the covariance of traits with body size. We conclude that epistasis, by differentially affecting both the canalization and mean values of the traits of a pleiotropic domain, causes variation in the covariance structure. Variation in pleiotropy maintains evolvability of the genetic architecture, in particular the evolvability of its modular organization.     

ALLOMETRIC CONSTRAINTS AND THE EVOLUTION OF ALLOMETRY

Morphological traits often covary within and among species according to simple power laws referred to as allometry. Such allometric relationships may result from common growth regulation, and this has given rise to the hypothesis that allometric exponents may have low evolvability and constrain trait evolution. We formalize hypotheses for how allometry may constrain morphological trait evolution across taxa, and test these using more than 300 empirical estimates of static (within‐species) allometric relations of animal morphological traits. Although we find evidence for evolutionary changes in allometric parameters on million‐year, cross‐species time scales, there is limited evidence for microevolutionary changes in allometric slopes. Accordingly, we find that static allometries often predict evolutionary allometries on the subspecies level, but less so across species. Although there is a large body of work on allometry in a broad sense that includes all kinds of morphological trait–size relationships, we found relatively little information about the evolution of allometry in the narrow sense of a power relationship. Despite the many claims of microevolutionary changes of static allometries in the literature, hardly any of these apply to narrow‐sense allometry, and we argue that the hypothesis of strongly constrained static allometric slopes remains viable.     

Genetic mapping of allometric scaling laws

Many biological processes, from cellular metabolism to population dynamics, are characterized by particular allometric scaling relationships between rate and size (power laws). A statistical model for mapping specific quantitative trait loci (QTLs) that are responsible for allometric scaling laws has been developed. We present an improved model for allometric mapping of QTLs based on a more general allometry equation. This improved model includes two steps: (1) use model II regression analysis to estimate the parameters underlying universal allometric scaling laws, and (2) substitute the estimated allometric parameters in the mixture-based mapping model to obtain the estimation of QTL position and effects. This model has been validated by a real example for a mouse F2 progeny, in which two QTLs were detected on different chromosomes that determine the allometric relationship between growth rate and body weight.     

Genetic variation in the pleiotropic association between physical activity and body weight in mice

Background

A sedentary lifestyle is often assumed to lead to increases in body weight and potentially obesity and related diseases but in fact little is known about the genetic association between physical activity and body weight. We tested for such an association between body weight and the distance, duration, and speed voluntarily run by 310 mice from the F₂ generation produced from an intercross of two inbred lines that differed dramatically in their physical activity levels.

Methods

We used a conventional interval mapping approach with SNP markers to search for QTLs that affected both body weight and activity traits. We also conducted a genome scan to search for relationship QTLs (relQTLs), or chromosomal regions that affected an activity trait variably depending on the phenotypic value of body weight.

Results

We uncovered seven quantitative trait loci (QTLs) affecting body weight, but only one co-localized with another QTL previously found for activity traits. We discovered 19 relQTLs that provided evidence for a genetic (pleiotropic) association of physical activity and body weight. The three genotypes at each of these loci typically exhibited a combination of negative, zero, and positive regressions of the activity traits on body weight, the net effect of which was to produce overall independence of body weight from physical activity. We also demonstrated that the relQTLs produced these varying associations through differential epistatic interactions with a number of other epistatic QTLs throughout the genome.

Conclusion

It was concluded that individuals with specific combinations of genotypes at the relQTLs and epiQTLs might account for some of the variation typically seen in plots of the association of physical activity with body weight.     

The importance of considering animal body mass in IPCC greenhouse inventories and the underappreciated role of wild herbivores

Methane is an important greenhouse gas, but characterizing production by source sector has proven difficult. Current estimates suggest herbivores produce ~20% (~76–189 Tg yr^?1) of methane globally, with wildlife contributions uncertain. We develop a simple and accurate method to estimate methane emissions and reevaluate production by wildlife. We find a strikingly robust relationship between body mass and methane output exceeding the scaling expected by differences in metabolic rate. Our allometric model gives a significantly better fit to empirical data than IPCC Tier 1 and 2 calculations. Our analysis suggests that (i) the allometric model provides an easier and more robust estimate of methane production than IPCC models currently in use; (ii) output from wildlife is much higher than previously considered; and (iii) because of the allometric scaling of methane output with body mass, national emissions could be reduced if countries favored more, smaller livestock, over fewer, larger ones.     

Crown allometries are less responsive than stem allometry to tree size and habitat variations in an Indian monsoon forest

While theoretical allometric models postulate universal scaling exponents, empirical relationships between tree dimensions show marked variability that reflects changes in the biomass allocation pattern. As growth of the various tree compartments may be controlled by different functions, it is hypothesized that they may respond differently to factors of variation, resulting in variable tree morphologies and potentially in trade-offs between allometric relationships. We explore the variability of tree stem and crown allometries using a dataset of 1,729 trees located in an undisturbed wet evergreen forest of the Western Ghats, India. We specifically test whether species adult stature, terrain slope, tree size and crown light exposure affect the relationships between stem diameter and stem height (stem allometry), and between stem diameter and crown width, crown area and crown volume (crown allometries). Results show that both stem and crown allometries are subject to variations in relation to both endogenous (tree size, species adult stature) and exogenous (terrain slope, crown light exposure) factors. Stem allometry appears to be more affected by these factors than are crown allometries, including the stem diameter–crown volume relationship, which proved to be particularly stable. Our results support the idea that height is a prevailing adjustment factor for a tree facing variable growth (notably light) conditions, while stem diameter–crown volume allometry responds more to internal metabolic constraints. We ultimately discuss the various sources of variability in the stem and crown allometries of tropical trees that likely play an important role in forest community dynamics.     

Influence of food,body size,and fragmentation on metabolic rate in a sessile marine invertebrate

Metabolic rates vary among individuals according to food availability and phenotype, most notably body size. Disentangling size from other factors (e.g., age, reproductive status) can be difficult in some groups, but modular organisms may provide an opportunity for manipulating size experimentally. While modular organisms are increasingly used to understand metabolic scaling, the potential of feeding to alter metabolic scaling has not been explored in this group. Here, we perform a series of experiments to examine the drivers of metabolic rate in a modular marine invertebrate, the bryozoan Bugula neritina. We manipulated size and examined metabolic rate in either fed or starved individuals to test for interactions between size manipulation and food availability. Field collected colonies of unknown age showed isometric metabolic scaling, but those colonies in which size was manipulated showed allometric scaling. To further disentangle age effects from size effects, we measured metabolic rate of individuals of known age and again found allometric scaling. Metabolic rate strongly depended on access to food: starvation decreased metabolic rate by 20% and feeding increased metabolic rate by 43%. In comparison to other marine invertebrates, however, the increase in metabolic rate, as well as the duration of the increase (known as specific dynamic action, SDA), were both low. Importantly, neither starvation nor feeding altered the metabolic scaling of our colonies. Overall, we found that field‐collected individuals showed isometric metabolic scaling, whereas metabolic rate of size‐manipulated colonies scaled allometrically with body size. Thus, metabolic scaling is affected by size manipulation but not feeding in this colonial marine invertebrate.     

Genomic architecture of habitat‐related divergence and signature of directional selection in the body shapes of Gnathopogon fishes

Evolution of ecomorphologically relevant traits such as body shapes is important to colonize and persist in a novel environment. Habitat‐related adaptive divergence of these traits is therefore common among animals. We studied the genomic architecture of habitat‐related divergence in the body shape of Gnathopogon fishes, a novel example of lake–stream ecomorphological divergence, and tested for the action of directional selection on body shape differentiation. Compared to stream‐dwelling Gnathopogon elongatus, the sister species Gnathopogon caerulescens, exclusively inhabiting a large ancient lake, had an elongated body, increased proportion of the caudal region and small head, which would be advantageous in the limnetic environment. Using an F₂ interspecific cross between the two Gnathopogon species (195 individuals), quantitative trait locus (QTL) analysis with geometric morphometric quantification of body shape and restriction‐site associated DNA sequencing‐derived markers (1622 loci) identified 26 significant QTLs associated with the interspecific differences of body shape‐related traits. These QTLs had small to moderate effects, supporting polygenic inheritance of the body shape‐related traits. Each QTL was mostly located on different genomic regions, while colocalized QTLs were detected for some ecomorphologically relevant traits that are proxy of body and caudal peduncle depths, suggesting different degree of modularity among traits. The directions of the body shape QTLs were mostly consistent with the interspecific difference, and QTL sign test suggested a genetic signature of directional selection in the body shape divergence. Thus, we successfully elucidated the genomic architecture underlying the adaptive changes of the quantitative and complex morphological trait in a novel system.     

Genetic analyses of metabolic body weight,carcass weight and body conformation traits in Nordic dairy cattle

Improving feed efficiency in dairy cattle by animal breeding has started in the Nordic countries. One of the two traits included in the applied Saved feed index is called maintenance and it is based on the breeding values for metabolic BW (MBW). However, BW recording based on heart girth measurements is decreasing and recording based on scales is increasing only slowly, which may weaken the maintenance index in future. Therefore, the benefit of including correlated traits, like carcass weight and conformation traits, is of interest. In this study, we estimated genetic variation and genetic correlations for eight traits describing the energy requirement for maintenance in dairy cattle including: first, second and third parity MBW based on heart girth measurements, carcass weight (CARW) and predicted MBW (pMBW) based on predicted slaughter weight, and first parity conformation traits stature (ST), chest width (CW) and body depth (BD). The data consisted of 21 329 records from Finnish Ayrshire and 9 780 records from Holstein cows. Heritability estimates were 0.44, 0.53, 0.56, 0.52, 0.54, 0.60, 0.17 and 0.26 for MBW1, MBW2, MBW3, CARW, pMBW, ST, CW and BD, respectively. Estimated genetic correlations among MBW traits were strong (>0.95). Genetic correlations between slaughter traits (CARW and pMBW) and MBW traits were higher (from 0.77 to 0.90) than between conformation and MBW traits (from 0.47 to 0.70). Our results suggest that including information on carcass weight and body conformation as correlated traits into the maintenance index is beneficial when direct BW measurements are not available or are difficult or expensive to obtain.     

Sexual selection and allometry: a critical reappraisal of the evidence and ideas

One of the most pervasive ideas in the sexual selection literature is the belief that sexually selected traits almost universally exhibit positive static allometries (i.e., within a sample of conspecific adults, larger individuals have disproportionally larger traits). In this review, I show that this idea is contradicted by empirical evidence and theory. Although positive allometry is a typical attribute of some sexual traits in certain groups, the preponderance of positively allometric sexual traits in the empirical literature apparently results from a sampling bias reflecting a fascination with unusually exaggerated (bizarre) traits. I review empirical examples from a broad range of taxa illustrating the diversity of allometric patterns exhibited by signal, weapon, clasping and genital traits, as well as nonsexual traits. This evidence suggests that positive allometry may be the exception rather than the rule in sexual traits, that directional sexual selection does not necessarily lead to the evolution of positive allometry and, conversely, that positive allometry is not necessarily a consequence of sexual selection, and that many sexual traits exhibit sex differences in allometric intercept rather than slope. Such diversity in the allometries of secondary sexual traits is to be expected, given that optimal allometry should reflect resource allocation trade-offs, and patterns of sexual and viability selection on both trait size and body size. An unbiased empirical assessment of the relation between sexual selection and allometry is an essential step towards an understanding of this diversity.     

Allometric Convergence in Savanna Trees and Implications for the Use of Plant Scaling Models in Variable Ecosystems

Theoretical models of allometric scaling provide frameworks for understanding and predicting how and why the morphology and function of organisms vary with scale. It remains unclear, however, if the predictions of ‘universal’ scaling models for vascular plants hold across diverse species in variable environments. Phenomena such as competition and disturbance may drive allometric scaling relationships away from theoretical predictions based on an optimized tree. Here, we use a hierarchical Bayesian approach to calculate tree-specific, species-specific, and ‘global’ (i.e. interspecific) scaling exponents for several allometric relationships using tree- and branch-level data harvested from three savanna sites across a rainfall gradient in Mali, West Africa. We use these exponents to provide a rigorous test of three plant scaling models (Metabolic Scaling Theory (MST), Geometric Similarity, and Stress Similarity) in savanna systems. For the allometric relationships we evaluated (diameter vs. length, aboveground mass, stem mass, and leaf mass) the empirically calculated exponents broadly overlapped among species from diverse environments, except for the scaling exponents for length, which increased with tree cover and density. When we compare empirical scaling exponents to the theoretical predictions from the three models we find MST predictions are most consistent with our observed allometries. In those situations where observations are inconsistent with MST we find that departure from theory corresponds with expected tradeoffs related to disturbance and competitive interactions. We hypothesize savanna trees have greater length-scaling exponents than predicted by MST due to an evolutionary tradeoff between fire escape and optimization of mechanical stability and internal resource transport. Future research on the drivers of systematic allometric variation could reconcile the differences between observed scaling relationships in variable ecosystems and those predicted by ideal models such as MST.     

陆地棉遗传图谱构建与纤维品质性状QTL定位

以陆地棉(Gossypium hirsutum L.)品种Bar19/1和Acala1517-77杂交的108个F2单株为材料,应用85个标记(70个SSR标记和15个AFLP标记)构建了总长为814cM的遗传图谱,覆盖棉花基因组的18.3%。该图谱包含25个连锁群,分别对应到17条染色体和4个未知连锁群。应用复合区间作图法分析了该组合的108个F2单株和F3家系纤维品质性状,从遗传图谱上检测到19个纤维品质数量性状基因座(QTL),包括5个纤维长度、6个纤维比强度、4个伸长率及4个马克隆值QTL,分别解释各性状表型变异的15.11%~28.45%、8.46%~24.51%、11.08%~27.55%和9.23%~42.21%。纤维长度和伸长率的QTL以部分显性为主,少数具有超显性,比强度QTL以加性和部分显性为主,4个马克隆值QTL中有3个表现为超显性。研究结果表明,陆地棉Bar19/1和Acala1517-77间多态性位点丰富,有利于构建高密度遗传图谱,纤维品质性状的QTL分析从分子水平上揭示了纤维品质的遗传基础。     

Genetic determinants of atherosclerosis,obesity, and energy balance in consomic mice

Metabolic diseases such as obesity and atherosclerosis result from complex interactions between environmental factors and genetic variants. A panel of chromosome substitution strains (CSSs) was developed to characterize genetic and dietary factors contributing to metabolic diseases and other biological traits and biomedical conditions. Our goal here was to identify quantitative trait loci (QTLs) contributing to obesity, energy expenditure, and atherosclerosis. Parental strains C57BL/6 and A/J together with a panel of 21 CSSs derived from these progenitors were subjected to chronic feeding of rodent chow and atherosclerotic (females) or diabetogenic (males) test diets, and evaluated for a variety of metabolic phenotypes including several traits unique to this report, namely fat pad weights, energy balance, and atherosclerosis. A total of 297 QTLs across 35 traits were discovered, two of which provided significant protection from atherosclerosis, and several dozen QTLs modulated body weight, body composition, and circulating lipid levels in females and males. While several QTLs confirmed previous reports, most QTLs were novel. Finally, we applied the CSS quantitative genetic approach to energy balance, and identified three novel QTLs controlling energy expenditure and one QTL modulating food intake. Overall, we identified many new QTLs and phenotyped several novel traits in this mouse model of diet-induced metabolic diseases.     

Testing metabolic scaling theory using intraspecific allometries in Antarctic microarthropods

Quantitative scaling relationships among body mass, temperature and metabolic rate of organisms are still controversial, while resolution may be further complicated through the use of different and possibly inappropriate approaches to statistical analysis. We propose the application of a modelling strategy based on the theoretical approach of Akaike's information criteria and non‐linear model fitting (nlm). Accordingly, we collated and modelled available data at intraspecific level on the individual standard metabolic rate of Antarctic microarthropods as a function of body mass (M), temperature (T), species identity (S) and high rank taxa to which species belong (G) and tested predictions from metabolic scaling theory (mass‐metabolism allometric exponent b = 0.75, activation energy range 0.2–1.2 eV). We also performed allometric analysis based on logarithmic transformations (lm). Conclusions from lm and nlm approaches were different. Best‐supported models from lm incorporated T, M and S. The estimates of the allometric scaling exponent linking body mass and metabolic rate resulted in a value of 0.696 ± 0.105 (mean ± 95% CI). In contrast, the four best‐supported nlm models suggested that both the scaling exponent and activation energy significantly vary across the high rank taxa (Collembola, Cryptostigmata, Mesostigmata and Prostigmata) to which species belong, with mean values of b ranging from about 0.6 to 0.8. We therefore reached two conclusions: 1, published analyses of arthropod metabolism based on logarithmic data may be biased by data transformation; 2, non‐linear models applied to Antarctic microarthropod metabolic rate suggest that intraspecific scaling of standard metabolic rate in Antarctic microarthropods is highly variable and can be characterised by scaling exponents that greatly vary within taxa, which may have biased previous interspecific comparisons that neglected intraspecific variability.