Transfer and maintenance of small, mobilizable plasmids with ColE1 replication origins in Legionella pneumophila

With the mutagenesis of specific, virulence-associated genes of Legionella pneumophila as the eventual goal, methods for gene transfer to these bacteria were developed. Following the observations of others that conjugative, broad-host-range plasmids could be transferred from Escherichia coli to L. pneumophila at low frequency, we constructed a small mobilizable vector, pTLP1, which carries oriV from pBR322, oriT from pRK2, Kmr from Tn5, and an L. pneumophila-derived fragment to permit chromosomal integration. In triparental matings including an E. coli with a conjugative (Tra+) helper plasmid, kanamycin-resistance was transferred from E. coli to L. pneumophila. Southern hybridization of L. pneumophila transconjugants showed that pTLP1 was replicated autonomously. Additional matings of plasmids having deletions or substitutions of pTLP1 sequences confirmed that replication in L. pneumophila requires oriV only. pTLP1 was maintained in L. pneumophila with passage on medium containing kanamycin but was rapidly lost after passage on nonselective medium. This plasmid instability in L. pneumophila is most likely due to rapid generation of plasmid-free segregants because of plasmid multimerization and low plasmid copy number. We conclude that mobilizable pBR322-derived plasmids can be used as shuttle vectors to transfer cloned genes to L. pneumophila, a feature that can be exploited for the purposes of mutagenesis or genetic complementation.     

Analysis of mobilization elements in plasmids from Shigella flexneri.

The mobilization properties of three plasmids were examined after cotransfer from Shigella flexneri to Escherichia coli. The largest plasmid, pCN1, was shown to be a conjugative R factor that could promote its own transfer and allow cotransfer of a 4.1-kilobase plasmid, pCN3; mobilization of the third plasmid, pCN2 (6.3 kilobases), required the presence of both pCN1 and pCN3. Sequences from pCN2 and pCN3 homologous to the bom (basis of mobilization) sites of ColE1 and pBR322 were localized by analysis of site-specific deletion derivatives generated in vivo during the transfer of composite plasmids and were characterized by DNA sequencing.     

Efficient transformation of Erwinia carotovora subsp. carotovora and E. carotovora subsp. atroseptica.

We used a modified version of the method of Hanahan (D. Hanahan, J. Mol. Biol. 166:557-580, 1983) to transform Erwinia carotovora subsp. carotovora and E. carotovora subsp. atroseptica with the plasmids pBR322, pBR325, and pAT153. The transformation frequency ranged from 1 X 10(2) to 4 X 10(4) colonies per micrograms of plasmid DNA. The nature of these transformants was confirmed by plasmid analysis. ColE1-based plasmids make potentially useful cloning vectors for the study of genes involved in the pathogenesis of this species.     

Plasmid ColE1 conjugal mobility: the nature of bom, a region required in cis for transfer

Summary Conjugal mobility of ColE1 and related plasmids is promoted by a wide range of conjugative plasmids. ColE1 produces trans-acting products and has a region required in cis (bom; basis of mobility) for such mobility. Here we show that plasmid pBR322 contains a functional bom sequence located within a 141 bp HhaI fragment. This bom region is functional for conjugation promoted by several different conjugative plasmids and is highly conserved in ColE1 and contains nic the putative origin of transfer. The orientation and position of bom with respect to the ColE1 vegetative origin of replication can be changed without affecting the frequency of conjugal mobility promoted by R64drd11.     

Cloning vectors that yield high levels of single-stranded DNA for rapid DNA sequencing

We have constructed chimeric plasmid vectors with the origin and intergenic region from M13 phage cloned into the PvuII ( pZ145 ) and AhaIII ( pZ150 , pZ152 ) sites of pBR322. In the absence of M13 phage, these plasmids replicate like any other ColE1-derived plasmid and confer both ampicillin and tetracycline resistance (Amp, Tet). Upon infection with M13 phage, the viral origin present on the plasmids permits phage-directed plasmid replication and results in high yields of single-stranded (ss) plasmid DNA in M13-like particles. This ssDNA, which represents only one of the plasmid strands, is useful as a substrate for rapid DNA sequence determination by the dideoxy sequencing method described by Sanger et al. (1977). Since these plasmids contain an intact pBR322, the intergenic region can be transferred onto most pBR322 derivatives to yield ss plasmid DNA without affecting the recipient plasmid for further studies. We also constructed a deletion derivative of pZ145 , plasmid pZ146 , that does not exhibit interference with the growth of the M13 helper, although this plasmid is encapsidated into phage particles. This result confirms the theory that the intergenic region consists of two domains: one domain being a segment involved in phage morphogenesis and the other being a region of functional origin which interferes with M13 replication.     

pMS76, a plasmid capable of amplification by treatment with chloramphenicol

pMS76 is a nonconjugative, 5.54-megadalton plasmid. This plasmid is present in Escherichia coli K12 cells at about 20 copies per chromosome. In addition, the pMS76 plasmid can be mobilized by conjugative plasmids and it shares a number of other properties with the amplifiable ColE1 plasmid, including the ability to amplify copy number in the presence of chloramphenicol. However, pMS76 is compatible with ColE1-like replicons, pBR313, and with other multicopy plasmids, RSF1030 and pACYC184. Also the replication of pMS76 is rifampicin sensitive and requires DNA polymerase 1.     

Construction and characterization of new cloning vehicles. III. Derivatives of plasmid pBR322 carrying unique Eco RI sites for selection of Eco RI generated recombinant DNA molecules.

In vitro recombinant DNA techniques were used to construct two new cloning vehicles, pBR324 and pBR235. These vectors, derived from plasmid pBR322, are relaxed replicating elements. Plasmid pBR324 carries the genes from pBR322 coding for resistance to the antibiotics ampicillin (Apr) and tetracycline (Tcr) and the colicin E1 structural and immunity genes derived from plasmid pMBI. Plasmid pBR325 carries the Apr and Tcr genes from pBR322 and the cloramphenicol resistance gene (Cmr) from phage P1Cm. In these plasmids the unique EcoRI restriction site present in the DNA molecule is located either in the colicin E1 structural gene (pBR324) or in the Cmr gene (pBR325). These vectors were constructed in order to have a single EcoRI site located in the middle of a structural gene which when inactivated would allow, for the easy selection of plasmid recombinant DNA molecules. These plasmids permit the molecular cloning and easy selection of EcoRI, BamHI, HindIII, PstI, HincII, SalI, (XamI), Smal, (XmaI), BglII and DpnII restriction generated DNA molecules.     

Intergeneric transfer and exchange recombination of restriction fragments cloned in pBR322: a novel strategy for the reversed genetics of the Ti plasmids of Agrobacterium tumefaciens

Transmission of ColE1/pMB1-derived plasmids, such as pBR322, from Escherichia coli donor strains was shown to be an efficient way to introduce these plasmids into Agrobacterium. This was accomplished by using E. coli carrying the helper plasmids pGJ28 and R64drd11 which provide the ColE1 mob functions and tra functions, respectively. For example, the broad host-range replication plasmid, pGV1150, a co-integrate plasmid between pBR322 and the W-type mini-Sa plasmid, pGV1106, was transmitted from E. coli to A. tumefaciens with a transfer frequency of 4.5 x 10(-3). As pBR322 clones containing pTiC58 fragments were unable to replicate in Agrobacterium, these clones were found in Agrobacterium only if the acceptor carried a Ti plasmid, thus allowing a co-integration of the pBR322 clones with the Ti plasmid by homology recombination. These observations were used to develop an efficient method for site-specific mutagenesis of the Ti plasmids. pTiC58 fragnents, cloned in pBR322, were mutagenized in vitro and transformed into E. coli. The mutant clones were transmitted from an E. coli donor strain containing pGJ28 and R64drd11 to an Agrobacterium containing a target Ti plasmid. Selecting for stable transfer of the mutant clone utilizing its antibiotic resistance marker(s) gave exconjugants that already contained a co-integrate plasmid between the mutant clone and the Ti plasmid. A second recombination can dissociate the co-integrate plasmid into the desired mutant Ti plasmid and a non-replicating plasmid formed by the vector plasmid pBR322 and the target Ti fragment. These second recombinants lose the second plasmid and they are identified by screening for the appropriate marker combination.     

The Agrobacterium rhizogenes pRi TL-DNA segment as a gene vector system for transformation of plants

Summary A plant gene transfer system was developed from the Agrobacterium rhizogenes pRi15834 TL-DNA region. Intermediate integration vectors constructed from ColE1-derived plasmids served as cloning vectors in Escherichia coli and formed cointegrates into the TL-DNA after transfer to A. rhizogenes. An A. rhizogenes strain with pBR322 plasmid sequences replacing part of the TL-DNA was also constructed. Plasmids unable to replicate in Agrobacterium can integrate into this TL-DNA by homologous recombination through pBR322 sequences. No loss of pathogenicity was observed with the strains formed after integration of intermediate vectors or strains carrying pBR322 in the TL-DNA segment. Up to 15 kb of DNA have been transferred to plant cells with these systems. The T-DNA from a binary vector was cotransformed into hairy roots which developed after transfer of the wild-type pRi T-DNA. Tested on Lotus corniculatus the TL-derived vector system transformed 90% of the developed roots and the T-DNA from the binary vector was cotransformed into 60% of the roots. Minimum copy numbers of one to five were found. Both constitutive and organ-specific plant genes were faithfully expressed after transfer to the legume L. corniculatus.     

Construction and Properties of Cloning Vectors Based on a 7.2-kb Rhizobium meliloti Cryptic Plasmid

Cloning vectors (pFD1001, pFD1192, pFD1194, and pFD1212) were constructed by extension of the host range of a 7.2-kb Rhizobium meliloti cryptic plasmid (pRm1132f) with the ColE1-based plasmids, pBR322, pACYC177, pACYC 184, pSUP301, or pHC179; mobilization was facilitated by introduction of the ori T region from pRK2, a broad-host-range plasmid. The vector plasmids transferred readily into a wide range of gram-negative bacteria and had relatively low copy number in R. meliloti; two constructs, pFD1001 and pFD1212, were completely stable in R. meliloti isolated from nodules of alfalfa (Medicago sativa). A representative of the vector constructs (pFD1001) could be maintained in R. meliloti in the presence of the broad-host-range shuttle plasmid pRK290. These two vector plasmids could be introduced into R. meliloti, either simultaneously or singly when pRK290 was the resident plasmid; however, entry of pRK290 was blocked when pFD1001 was the resident plasmid. The cloning vectors constructed in this study should prove to be useful for the genetic manipulation of Rhizobium.     

Stability of ColE1-like and pBR322-like plasmids in Escherichia coli

The average copy number, the level of ampicillin resistance conferred by one plasmid, and the degree of plasmid multimerization were determined for several ColE1-like and pBR322-like plasmids. From the results obtained, the variance of the units of partition corresponding to each plasmid studied was calculated. Experimentally determined plasmid stability was compared with that calculated using the variance of the units of partition and the ratio between the generation times of plasmid-free and of plasmid-carrying cells, assuming that the units of partition are distributed randomly between daughter cells. Stability of the pBR322-like plasmids present mainly as monomers in the bacterial host was consistent with random partitioning, whereas pBR322-like plasmids, present mainly as dimers, and the ColE1-like plasmid showed greater stability than that predicted with random partitioning at cell division.     

Alielic exchange in Pseudomonas aeruginosa using novel ColE1-type vectors and a family of cassettes containing a portable oriT and the counter-selectable Bacillus subtilis sacB marker

An improved method for allele replacement in Pseudomonas aeruginosa was developed. The two main ingredients of the method are: (i) novel ColE1-type cloning vectors derived from pBR322 and pUC19; and (ii) a family of cassettes containing a portable oriT, the sacB gene from Bacillus subtilis as a counter-selectable marker, and a chloramphenicol-resistance gene allowing positive selection of both oriT and sacB. Introduction of plasmid-borne DNA into the chromosome was achieved in several steps. The DNA to be exchanged was first cloned into the new ColE1-type vectors. After insertion of the oriT and sacB sequences, these plasmid were conjugally transferred into P. aeruginosa and plasmid integrants were selected. Plating on sucrose-containing medium allowed positive selection for both plasmid excision and curing since Pseudomonas aeruginosa strains containing the sacB gene in single- or multiple copy were highly sensitive to 5% sucrose in rich medium. This procedure was successfully used to introduce an agmR mutation into P. aeruginosa wild-type strain PAO1 and should allow the exchange of any DNA segment into any non-essential regions of the P. aeruginosa chromosome.     

Development of broad-host-range vectors and gene banks: self-cloning of the Pseudomonas aeruginosa PAO chromosome.

A host-vector system for Pseudomonas aeruginosa PAO was developed. Scattered regions of the strain PAO chromosome were cloned by direct selection for complementation of auxotrophs or from a DNA gene bank which contains over 1,000 independently isolated chromosome-vector recombinant plasmids. The use of partially digested chromosomal DNA facilitated the selection of a variety of strain PAO chromosomal markers. The progenitor of the vector was a small, multicopy plasmid, pRO1600, found in a PAO strain which had acquired RP1 in a mating experiment. The bacterial host range that could be determined by transformation of vectors produced from pRO1600 resembles that for plasmid RP1. Two derivative plasmids were formed: pRO1613, for cloning DNA cleaved with restriction endonuclease PstI, and pRO1614, which was formed by deleting part of pRO1613 and fusion with plasmid pBR322. Plasmid pRO1614 utilizes known cloning sites within the tetracycline resistance region of pBR322.     

Efficient octopine Ti plasmid-derived vectors for Agrobacterium-mediated gene transfer to plants.

A two-component cloning system to transfer foreign DNA into plants was derived from the octopine Ti plasmid pTiB6S3. pGV2260 is a non-oncogenic Ti plasmid from which the T-region is deleted and substituted by pBR322. pGV831 is a streptomycin-resistant pBR325 derivative that contains a kanamycin resistance marker gene for plant cells and a site for cloning foreign genes between the 25-bp border sequences of the octopine T-region. Conjugative transfer of pGV831 derivatives to Agrobacterium and cointegration by homologous recombination between the pBR322 sequences present on pGV831 and pGV2260, can be obtained in a single step. Strains carrying the resulting cointegrated plasmids transfer and integrate T-DNA into the genome of tobacco protoplasts, and transformed tobacco calli are readily selected as resistant to kanamycin. Intact plants containing the entire DNA region between the T-DNA borders have been regenerated from such clones. In view of these properties we present pGV831 and its derivatives as vectors for efficient integration of foreign genes into plants.     

Survival and transfer in the human gut of poorly mobilizable (pBR322) and of transferable plasmids from the same carrier E. coli

We examined the survival of a host Escherichia coli K-12 bacterium containing two transferable plasmids (pLM2, pSL222-4) and one poorly mobilizable plasmid (pBR322), and the transfer of these three plasmids to endogenous bacteria in the human intestinal tract. The survival of this plasmid-carrying host organism in four human volunteers was 3.5 to 6 days at recovery rates of 10^?1 to 10^?4. This finding was similar to our previous survival data on the same organism bearing a single plasmid. The K-12 strain appeared to be under a strong selective disadvantage in the human gut, since, even when bearing a tetracycline-resistant plasmid, its titer did not increase despite the administration of tetracycline. Studies of transferability showed that, while the transfer-depressed incFII plasmid pSL222-4 transferred at a frequency of 10^?1 in culture, its transfer in the human gut was much less frequent. The number of new recipients per donor cell ingested was about 10^?5, which included new recipients arising by multiplication. The recovery of pSL222-4 transcipients was enhanced by the administration of tetracycline on day 6. Neither the transfer-repressed, broad host range incP plasmid pLM2, nor the plasmid pBR322, could be detected in any endogenous host bacteria. Using the transfer and mobilization frequencies obtained in culture and the number of new recipients of pSL222-4 in the intestinal tract, we estimated that any in vivo mobilization of pBR322 to a new recipient could not occur at a frequency higher than 10^?12.     

New runaway-replication-plasmid cloning vectors and suppression of runaway replication by novobiocin

Two new cloning vectors (pBEU28 and pBEU50) with temperature-controlled runaway-replication properties are described. pBEU28 is similar to aphA+ (KanR) plasmid pBEU2 but lacks a 1.8-kb duplication which is responsible for plasmid instability. pBEU50 is an analog of pBR313 and pBR322 in that it carries bla+(AmpR), which can be used for selection, and tet+(TetR) which can be inactivated by cloning at HindIII and BamHI restriction sites. Sublethal concentrations of novobiocin were exploited to suppress runaway replication and to restore the viability of the plasmid carriers. By this method copB deletion mutants of two temperature-controlled, conditional runaway-replication plasmids were detected and isolated. The unconditional runaway-replication property of these plasmids leads us to hypothesize that there are at least two controls of plasmid R1 copy number and that the copB-dependent control is temperature-sensitive in the conditional runaway replication mutants. The novobiocin suppression of the runaway replication permitted us to clone dnaN+ on pBEU28 and to identify its presence at 42 degrees C with a dnaN59 transformation recipient which was temperature-sensitive due to a defect in the dnaN gene.     

The use of a partition locus to increase stability of tryptophan-operon-bearing plasmids in Escherichia coli

The stability of different derivatives of plasmid vectors pBR322 and pACYC184 carrying the tryptophan operon of Escherichia coli was monitored in various media. It was found that in the absence of any special selective pressure, all plasmids were lost from the culture. The stability varied depending both on the orientation of the inserted tryptophan fragment and the growth media used. The pBR322::trp+ plasmids were lost at an average frequency of 0.3 to 0.8% per cell generation, while the pACYC184::trp+ plasmid was lost at a rate higher than 5%. In all cases the whole plasmid was lost at a rate higher than 5%. In all cases the whole plasmid was lost, indicating a high stability of the plasmid::cloned DNA as such. To increase the stability of the cloning vectors, the partition locus of plasmid pSC101 was added to both the pBR322::trp+ and pACYC184::trp+ plasmids. The addition of this gene increased the replicon stability at least 3- to 10-fold, with the pBR322::trp+-par+ plasmids being the most stable. Also in this case, the stability was dependent on the plasmid type and on the growth medium. In no case was there a discoordinate loss of the antibiotic-resistance and tryptophan genes from the vectors.     

Plasmid Specificity of The Origin of Transfer of Sex Factor F

The ability of F-like plasmids to promote transfer from the F origin of transfer was determined. Chromosome transfer was measured from plasmid derivatives of RecA(-) Hfr deletion strains which had lost all the F transfer genes but which in some cases retained, and in others had also lost, the origin sequence. ColV2 and ColVBtrp could initiate transfer from the F origin, but R100-1, R1-19, and R538-1 drd could not. These results can be correlated with the plasmid specificity of the traI components of the different plasmid transfer systems, supporting the hypothesis that the origin of transfer is the site of action of the traI product. Most F-like plasmids, including R1-19 and R538-1 drd, could transfer ColE1, consistent with previous findings that the (plasmid-specific) traI product is not necessary for ColE1 transfer by Flac; ColE1 transfer may be initiated by a ColE1-or host-determined product. R100-1 and R136fin(-) could not transfer ColE1 efficiently, apparently because of differences residing in their pilus-forming genes.     

Boundaries of the Origin of Replication: Creation of a pET-28a-Derived Vector with p15A Copy Control Allowing Compatible Coexistence with pET Vectors

During our studies involving protein-DNA interactions, we constructed plasmid pSAM to fulfill two requirements: 1) to facilitate transfer of cloned sequences from widely used expression vector pET-28a(+), and 2) to provide a vector compatible with pBR322-derived plasmids for use in cells harboring two different plasmids. Vector pSAM is a pET-28a(+)-derived plasmid with the p15A origin of replication (ori); pET-28a(+) contains the pBR322 replicon that is incompatible with other pBR322-derived plasmids. By replacing the original pET-28a(+) replicon–comprising the ori, RNAI, RNAII, and Rom–with the p15A replicon, we generated pSAM, which contains the pET-28a(+) multiple cloning site and is now compatible with pBR322-derived vectors. Plasmid copy number was assessed using quantitative PCR: pSAM copy number was maintained at 18±4 copies per cell, consistent with that of other p15A-type vectors. Compatibility with pBR322-derived vectors was tested with pGEX-6p-1 and pSAM, which maintained their copy numbers of 49±10 and 14±4, respectively, when both were present within the same cell. Swapping of the ori is a common practice; however, it is vital that all regions of the original replicon be removed. Additional vector pSAMRNAI illustrated that incompatibility remains when portions of the replicon, such as RNAI and/or Rom, are retained; pSAMRNAI, which contains the intact RNAI but not ROM, lowered the copy number of pGEX-6p-1 to 18±2 in doubly transformed cells due to retention of the pET-28a(+)-derived RNAI. Thus, pSAMRNAI is incompatible with vectors controlled by the pBR322 replicon and further demonstrates the need to remove all portions of the original replicon and to quantitatively assess copy number, both individually and in combination, to ensure vector compatibility. To our knowledge, this is the first instance where the nascent vector has been quantitatively assessed for both plasmid copy number and compatibility. New vector pSAM provides ease of transferring sequences from commonly used pET-28a(+) into a vector compatible with the pBR322 family of plasmids. This essential need is currently not filled.