Zinc tolerance and hyperaccumulation in F1 and F2 offspring from intra and interecotype crosses of Thlaspi caerulescens

The relationship between zinc (Zn) tolerance and hyperaccumulation in Thlaspi caerulescens was investigated from F1 and F2 crosses within and among metallicolous and nonmetallicolous Mediterranean populations. F1 offspring were grown on increasingly Zn-enriched soils to test Zn enrichment effects, and many families of F2 offspring were grown on a Zn-rich soil. Tolerance of F1 offspring depended on stress intensity. Tolerance of interecotype crosses was intermediate between that of the intraecotype crosses. No difference in Zn accumulation appeared among the F1 offspring from the three crosses involving metallicolous parents. Otherwise, none of these offspring exceeded the Zn hyperaccumulation threshold (10,000 mg kg(-1)), unlike the nonmetallicolous ones. The latter also showed the highest mortality. In some F2 families from interecotype crosses, hyperaccumulation values exceeded 15,000 mg kg(-1) in nontolerant offspring, whereas tolerant offspring displayed lower values (c. 10,000 mg kg(-1)). There was no difference between tolerant and nontolerant offspring when they showed low hyperaccumulation. Therefore, the relationship between tolerance and hyperaccumulation in F1 and F2 crosses depended on the hyperaccumulation level of plants.     

INTER- AND INTRASPECIFIC VARIATION OF MOSSES IN TOLERANCE TO COPPER AND ZINC

Bryophytes are often viewed as slowly evolving with little genetic variation within and among populations. A study of heavy-metal tolerance was initiated to test the capacity of bryophytes to undergo genetic differentiation in response to natural selection. Tolerance of Funaria hygrometrica to copper and zinc was greater in populations that originated on soil with high concentrations of these metals. Protonemal growth was more inhibited by the metals than was germination, and copper was more toxic than zinc. Zinc and copper tolerances were correlated, but so were the zinc and copper concentrations of native substrates. The pattern of population differentiation for heavy-metal tolerance in this species is much like that of flowering plants. Five populations of Physcomitrium pyriforme, which does not occur on metal-contaminated soil, were all highly tolerant of zinc but extremely intolerant of copper. This species seems to have an inherent tolerance to the former. Significant variation in tolerance to copper and zinc occurred among populations, but tolerance did not correlate with metal contents in native substrates. This pattern differs from that of flowering plants. Normal populations of species that colonize contaminated sites tended to be more tolerant than populations of species that do not colonize such sites. The extensive population differentiation in Funaria hygrometrica augments the evidence from electrophoretic data that there is genetic variation among populations of mosses and liverworts.     

ZINC AND COPPER TOLERANCE OF AGROSTIS STOLONIFERA L. IN TISSUE CULTURE

Callus tissue was induced from shoot meristematic tissue and root tips of a clone of the grass Agrostis stolonifera tolerant to both zinc and copper, and from a control clone tolerant to neither metal. Growth of the callus tissue on media containing zinc and copper showed that tolerance to both metals was maintained in tissue culture. The pattern of metal uptake in tissue culture resembled uptake by whole plants in that tolerant tissue took up more metal than nontolerant tissue. Plants regenerated from callus had the same copper and zinc tolerance as the original parental clones regardless of time of growth in tissue culture and shoot or root origin of the tissue. The results support previous evidence that metal tolerance is genetically determined and acts at the cellular level.     

Nickel tolerance and copper - nickel co - tolerance in Mimulus guttatus from copper mine and serpentine habitats

Previous work on M. guttatus suggested that nickel tolerance in copper mine populations may also be given by the genes for copper tolerance. It has been shown that copper tolerance in M. guttatus is controlled by a single major gene, plus a number of minor genes (or modifiers) which elevate copper tolerance. Crosses between nickel tolerant individuals from three families and non - tolerants showed that nickel tolerance in M. guttatus is heritable. In order to study the effects of the major copper tolerance gene on copper - nickel co - tolerance in M. guttatus, homozygous copper tolerant and non - tolerant lines were screened against nickel. Significant differences occur between these lines for copper, but were not found when analysed for nickel, indicating that copper - nickel tolerance is not governed by the major gene for copper tolerance. To test whether the minor genes for copper have a pleiotropic effect on nickel tolerance, five selection lines derived from three copper mines (Copperopolis, Penn and Quail) in Calaveras county, California, which vary in degree of tolerance to copper, by the presence or absence of minor copper genes, were also screened against nickel. Two out of three of the lines from Copperopolis showed elevated tolerance to nickel, but two further selection lines derived from Penn and Quail copper mines gave no indication of increased nickel tolerance. These results suggest that the minor genes for copper do not give tolerance to nickel. This was confirmed by the screening of modifier lines, in which modifiers for differing degrees of copper tolerance were inserted into a non - tolerant background. Genotypes possessing fewer copper modifiers yielded higher nickel tolerance than those genotypes which have a greater number of modifiers. Thus nickel tolerance in this species is heritable and under the control of different genes to those producing copper tolerance.     

Are Phytochelatins Involved in Differential Metal Tolerance or Do They Merely Reflect Metal-Imposed Strain?

Plants from nontolerant and copper-tolerant populations of Silene vulgaris both produce phytochelatins upon exposure to copper. The threshold copper concentration for induction of phytochelatin and the copper concentration at which maximum phytochelatin contents occurs increase proportionally with the level of tolerance to copper. When exposed to their own highest no-effect concentration or 50%-effect concentration of copper for root growth, tolerant and nontolerant plants exhibit equal phytochelatin contents in the root apex, which is the primary copper target. This also holds for distinctly tolerant nonsegregating F₃ families, derived from a single cross of a nontolerant plant to a tolerant one. Therefore, the phytochelatin content of the root apex can be used as a quantitative tolerance-independent measure of the degree of toxicity experienced by the plant. Differential copper tolerance in S. vulgaris does not appear to rely on differential phytochelatin production.     

The parallel expression of metal tolerance in pollen and sporophytes of Silene dioica (L.) Clairv., S. alba (mill.) krause and Mimulus guttatus DC

Summary The purpose of this paper was to determine if heavy metal tolerance was expressed in pollen and if its expression was correlated with the tolerance of the pollen source. Clones of Silene dioica, tolerant to zinc, closely related but nontolerant S. alba and clones of Mimulus guttatus tolerant and sensitive to copper were grown in the greenhouse in either standard potting soil or nutrient culture. Pollen was collected shortly after dehiscence, hydrated, and tested over a broad range of metal concentrations. The tolerance of the pollen source was determined by comparing root growth in solutions with and without heavy metals. In both Silene species and M. guttatus, the tolerance of the parental clone was expressed in its pollen. Pollen from tolerant individuals was able to germinate and grow at concentrations of metals which markedly inhibited pollen from nontolerants.     

The genetic basis of zinc tolerance in the metallophyte Arabidopsis halleri ssp. halleri (Brassicaceae): an analysis of quantitative trait loci

The species Arabidopsis halleri, an emerging model for the study of heavy metal tolerance and accumulation in plants, has evolved a high level of constitutive zinc tolerance. Mapping of quantitative trait loci (QTL) was used to investigate the genetic architecture of zinc tolerance in this species. A first-generation backcross progeny of A. halleri ssp. halleri from a highly contaminated industrial site and its nontolerant relative A. lyrata ssp. petraea was produced and used for QTL mapping of zinc tolerance. A genetic map covering most of the A. halleri genome was constructed using 85 markers. Among these markers, 65 were anchored in A. thaliana and revealed high synteny with other Arabidopsis genomes. Three QTL of comparable magnitude on three different linkage groups were identified. At all QTL positions zinc tolerance was enhanced by A. halleri alleles, indicating directional selection for higher zinc tolerance in this species. The two-LOD support intervals associated with these QTL cover 24, 4, and 13 cM. The importance of each of these three regions is emphasized by their colocalization with HMA4, MTP1-A, and MTP1-B, respectively, three genes well known to be involved in metal homeostasis and tolerance in plants.     

POLLEN TUBE COMPETITION AND SELECTION FOR METAL TOLERANCE IN SILENE DIOICA (CARYOPHYLLACEAE) AND MIMULUS GUTTATUS (SCROPHULARIACEAE)

An experiment was conducted to test whether metal tolerance expressed in pollen would provide a competitive advantage during pollen tube growth and fertilization. Copper or zinc was introduced into the pistil by growing metal tolerant plants of Silene dioica or Mimulus guttatus in a nutrient solution to which metals were added. Flowers from treated and control plants were pollinated with either metal tolerant or metal sensitive pollen. The rate of pollen tube growth, the number of seeds set, and the number of viable seeds produced were measured. In general, no effects were found on the rates of pollen tube growth. However, the number of fertilizations and viable seeds were affected. When toxic metals were present, the relative success of pollen from the nontolerant parent was reduced.     

Acclimation to lead in the freshwater isopod Asellus aquaticus

Summary Some populations of the isopod Asellus aquaticus from polluted rivers are tolerant to lead. Here it is shown that nontolerant animals from an unpolluted site can be made tolerant by laboratory exposure to low levels of the metal, and it is suggested that naturally occurring tolerance may be achieved by acclimation.     

Zinc tolerance in populations ofDeschampsia cespitosa (Gramineae) beneath electricity pylons

Patterns of zinc tolerance were examined in eightDeschampsia cespitosa (L.)Beauv. populations from normal and zinc-contaminated soils, using solution culture methods. Zinc-tolerant populations have evolved beneath pylons, and their tolerance patterns (degree, variance, heritability) vary. Tolerance is genetically based in all of them. In contrast to the cases of other species previously reported, some within-population differences are considerable, and may be due to both heterogeneity of the soils zinc contents, various gene combinations and gene recombinations between genotypes. One control population contains many tolerant plants, an original result which is discussed.     

Parallel evolution of gene classes,but not genes: Evidence from Hawai'ian honeycreeper populations exposed to avian malaria

Adaptation in nature is ubiquitous, yet characterizing its genomic basis is difficult because population demographics cause correlations with nonadaptive loci. Introduction events provide opportunities to observe adaptation over known spatial and temporal scales, facilitating the identification of genes involved in adaptation. The pathogen causing avian malaria, Plasmodium relictum, was introduced to Hawai'i in the 1930s and elicited extinctions and precipitous population declines in native honeycreepers. After a sharp initial population decline, the Hawai'i ‘amakihi (Chlorodrepanis virens) has evolved tolerance to the parasite at low elevations where P. relictum exists, and can sustain infection without major fitness consequences. High‐elevation, unexposed populations of ‘amakihi display little to no tolerance. To explore the genomic basis of adaptation to P. relictum in low‐elevation ‘amakihi, we genotyped 125 ‘amakihi from the island of Hawai'i via hybridization capture to 40,000 oligonucleotide baits containing SNPs and used the reference ‘amakihi genome to identify genes potentially under selection from malaria. We tested for outlier loci between low‐ and high‐elevation population pairs and identified loci with signatures of selection within low‐elevation populations. In some cases, genes commonly involved in the immune response (e.g., major histocompatibility complex) were associated with malaria presence in the population. We also detected several novel candidate loci that may be implicated in surviving malaria infection (e.g., beta‐defensin, glycoproteins and interleukin‐related genes). Our results suggest that rapid adaptation to pathogens may occur through changes in different immune genes, but in the same classes of genes, across populations.     

Hybridisation and genetic selection for improving desiccation tolerance of the entomopathogenic nematode Steinernema feltiae

Shelf life of biological control products based on the entomopathogenic nematode Steinernema feltiae is rather limited. In order to prolong shelf life, the metabolism of nematodes during storage must be reduced, either by low temperature or by means of desiccation of the third stage dauer juveniles (DJs). Tolerance to desiccation is limited in S. feltiae. Their tolerance can be increased by an adaptation to moderate desiccation conditions. The objective of this study was to screen for tolerant strains among wild type populations of S. feltiae, hybridise most tolerant strains and further improve desiccation tolerance by subjection of the hybrid strain to genetic selection. Dehydrating conditions, measured as water activity (a _w-values), were produced by treating DJs with different concentrations of the polymer polyethylene glycol 600. Significant variation was recorded among 24 S. feltiae strains. The mean tolerated water activity survived by 50% of the population (WA₅₀) ranged from 0.78 to 0.93 when nematodes were not adapted to desiccation stress and from 0.66 to 0.88 when preadapted to desiccation stress. The six most desiccation tolerant strains of non-adapted and adapted nematode populations were crossed. Preadapted tolerance of hybrids was superior to the tolerance of parental strains, whereas non-adapted tolerance was not increased. The most tolerant hybrid had a WA₅₀ when preadapted of 0.67 and 0.86 when not adapted. The tolerance was lost after few reproductive cycles in the insect Galleria mellonella but was recovered again after six selection cycles with exposure to increasing stress conditions. Virulence and reproduction potential was not negatively affected by the selection. Stabilisation of the selection progress will be a major challenge to enable commercial exploitation of the genetic improvement.     

Functional screening for salinity tolerant genes from <Emphasis Type="Italic">Acanthus ebracteatus</Emphasis> Vahl using <Emphasis Type="Italic">Escherichia coli</Emphasis> as a host

Salinity reduces plant growth and crop production globally. The discovery of genes in salinity tolerant plants will provide the basis for effective genetic engineering strategies, leading to greater stress tolerance in economically important crops. In this study, we have identified and isolated 107 salinity tolerant candidate genes from a mangrove plant, Acanthus ebracteatus Vahl by using bacterial functional assay. Sequence analysis of these putative salinity tolerant cDNA candidates revealed that 65% of them have not been reported to be stress related and may have great potential for the elucidation of unique salinity tolerant mechanisms in mangrove. Among the genes identified were also genes that had previously been linked to stress response including salinity tolerance, verifying the reliability of this method in isolating salinity tolerant genes by using E. coli as a host.     

Characterization of salt tolerant alfalfa (Medicago sativa L.) plants regenerated from salt tolerant cell lines

Salt tolerant cell lines have been selected from Medicago sativa, by a single step selection process on tissue culture medium containing 1% NaCl. Plants regenerated from these lines show improved salt tolerance compared to parent plants. The regenerated plants are vigorous, have flowered and are self fertile. The cellular salt tolerance characteristic can be passaged through the regenerated plants, since callus cultures initiated from immature ovaries of the salt tolerant regenerated plants are salt tolerant without additional selection on 1% NaCl. Several of these second generation callus cultures have been regenerated to produce vigorous plants which maintain the salt tolerance characteristic. The tolerance phenotype appears dominant in seeds obtained from self fertilization of the tolerant plants. The regenerated salt tolerant plants are therefore a valuable source as genotypes in plant breeding for salt tolerance and isolation, identification and manipulation of genes which confer salt tolerance in alfalfa.Abbreviations SH Schenk and Hildebrandt medium - 2,4-D 2,4-dichlorophenoxyacetic acid     

An Experimental Test of Adaptive Introgression in Locally Adapted Populations of Splash Pool Copepods

As species struggle to keep pace with the rapidly warming climate, adaptive introgression of beneficial alleles from closely related species or populations provides a possible avenue for rapid adaptation. We investigate the potential for adaptive introgression in the copepod, Tigriopus californicus, by hybridizing two populations with divergent heat tolerance limits. We subjected hybrids to strong heat selection for 15 generations followed by whole-genome resequencing. Utilizing a hybridize evolve and resequence (HER) technique, we can identify loci responding to heat selection via a change in allele frequency. We successfully increased the heat tolerance (measured as LT₅₀) in selected lines, which was coupled with higher frequencies of alleles from the southern (heat tolerant) population. These repeatable changes in allele frequencies occurred on all 12 chromosomes across all independent selected lines, providing evidence that heat tolerance is polygenic. These loci contained genes with lower protein-coding sequence divergence than the genome-wide average, indicating that these loci are highly conserved between the two populations. In addition, these loci were enriched in genes that changed expression patterns between selected and control lines in response to a nonlethal heat shock. Therefore, we hypothesize that the mechanism of heat tolerance divergence is explained by differential gene expression of highly conserved genes. The HER approach offers a unique solution to identifying genetic variants contributing to polygenic traits, especially variants that might be missed through other population genomic approaches.     

Gene flow inAgrostis tenuis (Poaceae)

The copper tolerance of both adult plants and their seedlings, ofAgrostis tenuis from sites within and outside, but neighbouring the Parys Mountain mine (North Wales) were studied. Intensive sampling was carried out along a line starting from the mine boundaries to a distance of five miles away in the direction of the prevailing wind, and of two miles in an upwind direction. The test have shown that mine populations are very tolerant. In outside populations on soils with reduced of very low copper content the mean tolerance level of the seedlings is considerably higher than that of corresponding adult plants, while both show a gradual decrease in tolerance with distance from the mine. The gene flow moves in the direction of the prevailing wind transfering tolerant characters from the mine to the normal populations. The selective pressures on the toxic soil of the mine are quite strong and permit ± tolerant plants only, while on normal soils these pressures are not so severe, so that populations may be rather heterogenous regarding their tolerance towards copper.     

Heavy metal tolerance in Festuca ovina L. from contaminated sites in the Eifel Mountains,Germany

Extremely high degrees of lead tolerance, measured by comparing rates of root extension in culture solutions, are reported from populations of Festuca ovina growing at two lead-mining sites (Westschacht and Keldenich-II) near Mechernich in the Eifel Mountains, Germany. Other populations from nearby heavy metal-contaminated areas show a considerably smaller degree of lead tolerance. Samples of Festuca ovina collected in the field at Westschacht and Keldenich-II contain higher levels of lead in their aerial organs than do those from other lead-contaminated sites. The main soil factor determining the high degree of lead tolerance is the high Pb/Ca ratio. Populations from soils with a low Pb/Ca ratio display a very low degree of tolerance. It is therefore concluded that in Westschacht and Keldenich-II plants, a genuine intracellular tolerance mechanism is present, allowing the accumulation of lead in aerial organs.Leaf samples of zinc-tolerant Festuca contain higher levels of zinc than do samples of non-tolerant plants. Lead and zinc amounts in leaves are correlated with the soil ratios of Pb/Ca and Zn/Ca, respectively, rather than with the absolute soil-metal levels.In a slightly lead-tolerant, but highly zinc-tolerant clone of Festuca ovina from a site contaminated with large amounts of lead and zinc (Plombières), lead was found to be the major factor affecting the inhibition of root extension with combined treatments of lead and zinc in culture solutions. In the highly lead-tolerant, zinc-sensitive population from Westschacht, zinc governs the response of root growth to combinations of the two metals. The results are discussed in terms of discriminating distinct types of heavy-metal tolerance.     

Spatiotemporal dynamics and genome‐wide association analysis of desiccation tolerance in Drosophila melanogaster

Water availability is a major environmental challenge to a variety of terrestrial organisms. In insects, desiccation tolerance varies predictably over spatial and temporal scales and is an important physiological determinant of fitness in natural populations. Here, we examine the dynamics of desiccation tolerance in North American populations of Drosophila melanogaster using: (a) natural populations sampled across latitudes and seasons; (b) experimental evolution in field mesocosms over seasonal time; (c) genome‐wide associations to identify SNPs/genes associated with variation for desiccation tolerance; and (d) subsequent analysis of patterns of clinal/seasonal enrichment in existing pooled sequencing data of populations sampled in both North America and Australia. A cline in desiccation tolerance was observed, for which tolerance exhibited a positive association with latitude; tolerance also varied predictably with culture temperature, demonstrating a significant degree of thermal plasticity. Desiccation tolerance evolved rapidly in field mesocosms, although only males showed differences in desiccation tolerance between spring and autumn collections from natural populations. Water loss rates did not vary significantly among latitudinal or seasonal populations; however, changes in metabolic rates during prolonged exposure to dry conditions are consistent with increased tolerance in higher latitude populations. Genome‐wide associations in a panel of inbred lines identified twenty‐five SNPs in twenty‐one loci associated with sex‐averaged desiccation tolerance, but there is no robust signal of spatially varying selection on genes associated with desiccation tolerance. Together, our results suggest that desiccation tolerance is a complex and important fitness component that evolves rapidly and predictably in natural populations.     

Physiological responses in two populations of Andropogon glomeratus Walter B.S.P. to short-term salinity

Summary Andropogon glomeratus is a C₄ nonhalophytic grass which exhibits population differentiation for tolerance to short-term salinity exposure. To investigate possible physiological mechanisms whch enable salt-tolerant individuals to survive short-term inundation, gas exchange and water relations parameters were measured before and during a 5-day watering treatment of half-strength synthetic seawater in plants from a tolerant and a non-tolerant population. Photosynthetic recovery was followed for 10 days after the salinity treatment. Photosynthetic CO₂ uptake was substantially inhibited in both populations. Stomatal conductances decreased and intercellular CO₂ concentrations increased, indicating non-stomatal factors were primarily responsible for the decrease in CO₂ uptake. After termination of the salinity treatment photosynthetic capacity increased more rapidly in the tolerant population and reached the pretreatment level after 6 days, whereas the nontolerant population did not recover fully after 10 days. A-Ci curves measured before and after the salinity treatment indicated a decrease in the carboxylation efficiency, and suggested a proportionately greater metabolic inhibition relative to the increase in the stomatal limitation. Osmotic adjustment occurred in a 2-day period in the tolerant population, but there was no change in the osmotic potentials or the water potential at the point of turgor loss in the nontolerant population. Thus short-term salt tolerance in the marsh population is associated with rapid osmotic adjustment and recovcry of photosynthetic capacity shortly after the end of the salinity exposure, rather than maintenance of greater photosynthesis during the salinity treatment.