Using support vector machines to optimally classify rotator cuff strength data and quantify post-operative strength in rotator cuff tear patients

Shoulder strength data are important for post-operative assessment of shoulder function and have been used in diagnosis of rotator cuff pathology. Support vector machines (SVM) employ complex analysis techniques to solve classification and regression problems. A SVM, a machine learning technique, can be used for analysis and classification of shoulder strength data. The goals of this study were to determine the diagnostic competency of SVM based on shoulder strength data and to apply SVM analysis in efforts to derive a single representative shoulder strength score. Data were taken from fourteen isometric shoulder strength measurements of each shoulder (involved and uninvolved) in 45 rotator cuff tear patients. SVM diagnostic proficiency was found to be comparable to reported ultrasound values. Improvement of shoulder function was accurately represented by a single score in pairwise comparison of the pre-operative and the 12 month post-operative group (P < 0.004). Thus, the SVM-based score may be a promising metric for summarizing rotator cuff strength data.     

Radial extracorporeal shock wave therapy in the treatment of shoulder calcific tendinitis

Shoulder calcific lesions of the rotator cuff are a common problem in physiatric and orthopedic practice. The lesions are mostly located in the supraspinatus tendon, close to the insertion area in the critical zone. Patients are usually treated conservatively by nonsteroid antiinflammatory drugs, analgesic drugs, local injections, physiotherapy and rarely by applying surgical procedures. Painful shoulder gives rise to functional disabilities and may sometimes lead to pharmacological overuse. In the last twenty years, extracorporeal shock wave therapy (ESWT) has been frequently used in the treatment of calcific tendinopathies. We have evaluated the effectiveness of radial ESWT on the group of 30 patients, aged between 28 and 58 years, with calcific tendinitis of the shoulder. Criotherapy, medical exercises and radial ESWT were applied. We used the radial ESWT device (BTL-5000 SWT, Columbia, USA), 3 bars pressure, 10 Hz frequency, 2000 shocks. Patients were examined before the beginning of the treatment, immediately after the treatment, and 6 months later. The treatment included measurement of the range of motion (ROM), measurement of voluntary isometric contraction of shoulder muscles with manual muscle test (MMT), and subjective assessment of pain intensity with visual analogue scale (VAS). X-ray was done before and 6 month after treatment. The study has shown the efficiency of the treatment with radial ESWT. The level of statistical significance was determined with student t-test. Radial ESWT applied to patients with shoulder calcific lesions of the rotator cuff resulted in pain relief increase in the range of motion and increase in the muscular strength. As shown by X-ray, these results were followed by the decrease in the size of the rotator cuff calcifications.     

Rotator cuff tears: what have we learned from animal models?

Rotator cuff tendon tears are among the most common soft tissue injuries that occur at the shoulder. Despite advancements in surgical repair techniques, rotator cuff repairs experience a high rate of failure. The common occurrence of tears and the frequency of re-tears require a further understanding of the mechanisms associated with injuries, healing, and regeneration of the rotator cuff. This paper reviews in vivo studies using the various animal shoulder models of the rat, rabbit, sheep, canine, and primate. These animal models have been used to study intrinsic and extrinsic factors leading to shoulder degeneration, various suture techniques, effects of post-surgical treatment, numerous biologic and synthetic scaffolds, and an assortment of biologic augmentations used to accelerate healing. These effects can be examined in a controlled manner using animal models without other confounding factors that sometimes limit clinical studies. The clinically impactful results will be explained to highlight the specific knowledge gained from using animal models in rotator cuff research.     

肩袖间隙影像解剖及常见病变的研究进展

肩袖间隙在解剖学上是肩关节的一个复合区域,在维持肩关节稳定性和保护肱二头肌长头肌腱功能起重要作用。对肩袖间隙解剖结构及功能的深入认识有助于肩袖间隙损伤性病变、挛缩性病变等的及时诊断和合理治疗。影像学检查尤其是磁共振逐步成为肩袖间隙疾病最主要的检查方法,包括常规扫描、直接及间接性磁共振肩关节造影、增强扫描等。本文将就肩袖间隙的影像解剖及常见病变的相关研究进行综述。     

Measuring dynamic in-vivo glenohumeral joint kinematics: technique and preliminary results

Rotator cuff tears are a common injury that affect a significant percentage of the population over age 60. Although it is widely believed that the rotator cuff's primary function is to stabilize the humerus against the glenoid during shoulder motion, accurately measuring the three-dimensional (3D) motion of the shoulder's glenohumeral joint under in-vivo conditions has been a challenging endeavor. In particular, conventional motion measurement techniques have frequently been limited to static or two-dimensional (2D) analyses, and have suffered from limited or unknown in-vivo accuracy. We have recently developed and validated a new model-based tracking technique that is capable of accurately measuring the 3D position and orientation of the scapula and humerus from biplane X-ray images. Herein we demonstrate the in-vivo application of this technique for accurately measuring glenohumeral joint translations during shoulder motion in the repaired and contralateral shoulders of patients following rotator cuff repair. Five male subjects were tested at 3-4 months following arthroscopic rotator cuff repair. Superior-inferior humeral translation was measured during elevation, and anterior-posterior humeral translation was measured during external rotation in both the repaired and contralateral shoulders. The data failed to detect statistically significant differences between the repaired and contralateral shoulders in superior-inferior translation (p=0.74) or anterior-posterior translation (p=0.77). The measurement technique overcomes the limitations of conventional motion measurement techniques by providing accurate, 3D, in-vivo measures of glenohumeral joint motion during dynamic activities. On-going research is using this technique to assess the effects of conservative and surgical treatment of rotator cuff tears.     

EMG of scapulohumeral muscles in the chimpanzee during reaching and "arboreal" locomotion

Current views on the function of the deltoid and rotator cuff muscles emphasize their roles in arm-raising as participants in a scapulohumeral force "couple." The acceptance of such a mechanism is based primarily on a 1944 EMG study of human shoulder muscle action. More recently, it has been suggested that shoulder joint stabilization constitutes a second and equally important function of the cuff musculature, especially in nonhuman primates which habitually use their forelimbs in overhead postural and locomotor activities. Few comparative data exist, however, on the actual recruitment patterns of these muscles in different species. In order to assess the general applicability of a scapulohumeral force couple model, and the functional significance of the differential development of the scapulohumeral musculature among primate species, we have undertaken a detailed study of shoulder muscle activity patterns in nonhuman primates employing telemetered electromyography, which permits examination of unfettered natural behaviors and locomotion. The results of our research on the chimpanzee, Pan troglodytes, on voluntary reaching and two forms of "arboreal" locomotion reveal four ways in which previous perceptions of the function of the scapulohumeral muscles must be revised: 1) the posterior deltoid is completely different in function from the middle and anterior regions of this muscle; 2) the integrity of the glenohumeral joint during suspensory postures is not maintained solely by osseoligamentous structures; 3) the function of teres minor is entirely different from that of the other rotator cuff muscles and is more similar to the posterior deltoid and teres major; and 4) each remaining member of the rotator cuff plays a distinct, and often unique, role during natural behaviors. These results clearly refute the view that the muscles of the rotator cuff act as a single functional unit in any way, and an alternative to the force couple model is proposed.     

Shoulder complex kinematics pre- and post- rotator cuff repair

This study investigated shoulder complex joint kinematics and functional outcomes before and after full-thickness supraspinatus rotator cuff repair. Nine adults (mean age 63.4 ± 6.2 years) participated in three test sessions: 0–12 weeks pre-operatively, 9–12 weeks, and 22–30 weeks post-operatively. Upper extremity kinematics of the surgical arm’s glenohumeral, acromioclavicular, sternoclavicular and thoracohumeral joints over the duration of a hair combing task were quantified with motion analysis using inverse kinematics. The UCLA Shoulder Rating and Simple Shoulder Test shoulder health outcomes were administered at each session to determine patients’ perceived function of their surgical shoulder. Results indicated multiple significant increases over time among the three joints comprising the shoulder complex in the coronal and transverse planes, despite no increases in thoracohumeral motion, and suggest that thoracohumeral motion alone does not provide a comprehensive assessment. Interestingly, more significant increases were observed at the 6-month evaluation than the 3-month evaluation, which is not aligned with the standard rehabilitation endpoint. Thus, our findings suggest that clinicians should evaluate all joints of the shoulder complex during longer-term rehabilitation assessment. Ultimately, knowledge of patients’ pre-operative and post-operative shoulder complex kinematics may help to improve rehabilitation to promote improved patient outcomes.     

Shoulder reflexes.

Dynamic shoulder stability is dependent on muscular coordination and sensory inputs. In the shoulder, mechanoreceptors are found in the coracoacromial ligament, the rotator cuff tendons, the musculotendinous junctions of the rotator cuff and in the capsule. The number of receptors in the capsule is small compared to the number in the other shoulder structures. Proprioceptive information from numerous receptors in muscles and tendons is mediated via fast conducting nervefibers and probably contribute more to kinaestethic sensation than information from capsule and ligaments. Therefore it seems likely that the joint receptors have a more distinct role for the kinaestethic sense than muscle receptors. In cats a direct reflex from the afferents innervating the shoulder to the muscles around the shoulder has been presented. The reflex had an extremely short latency (2.7-3.1 ms). In man, a very long latency (300 ms) excitatory reflex has been found when nerves in the capsule were stimulated electrically during shoulder surgery. In addition, when the anterior-inferior capsule was excited in conscious humans with modest amplitude electrical stimuli during muscle activity, a strong inhibition was found with an average latency of 33 ms. Stimulation of the sensory nerves in the coracoacromial ligament has also been found to modify muscle activity strongly. Even though our understanding of the control of shoulder motion is incomplete, it is clear that sensory inputs can strongly modify muscle activity around the shoulder. This has implications for rehabilitation and shoulder surgery.     

Muscle efficiency in total shoulder prosthesis implantation: dependence on position of the humeral head and rotator cuff function]

Modern shoulder prostheses permit an anatomic reconstruction of the joint, although the biomechanical advantages are not proven. The goal of this study was to investigate the relationship between position of the humeral head and function of the shoulder prosthesis (muscle efficiency). Shoulder elevation-motion and rotator cuff defects were simulated in vitro in a robot-assisted shoulder simulator. The EPOCA Custom Offset shoulder prosthesis (Argomedical AG, Cham, CH) was implanted in seven normal shoulders (77 +/- 20 kg, 55 +/- 14 years). Active elevation was simulated by hydraulic cylinders, and scapulothoratic motion by a specially programmed industrial robot. Muscle efficiency (elevation-angle/muscle-force of the deltoid muscle) was measured in anatomic (ANA), medialised (MED) and lateralised (LAT) positions of the humeral head, with or without rotator cuff muscle deficiency. Medialisation increased efficiency by 0.03 +/- 0.04 deg/N (p = 0.022), lateralisation decreased it by 0.04 +/- 0.06 deg/N (p = 0.009). Supraspinatus muscle deficiency increased the deltoid force required to elevate the arm, and thus decreased efficiency (ANA p = 0.091, MED p = 0.018, LAT p = 0.028). The data confirm that the position of the humeral head affects the mechanics of total shoulder arthroplasty. Medialisation increases efficiency of the deltoid muscle and may prove useful in compensating isolated supraspinatus muscle deficiency. Lateralisation, in contrast, leads to an unfavorable situation.     

The use of the long head of triceps interposition muscle flap for treatment of massive rotator cuff tears

Massive rotator cuff tears present a difficult problem for orthopedic surgeons. To address this problem, a long head of triceps muscle interposition flap was proposed. Ten patients underwent repair of massive rotator cuff tears using the triceps muscle flap. The patients' strength and range of motion were tested preoperatively, and a University of California, Los Angeles, shoulder score was assigned. Similar testing was performed 1 year later. Postoperatively, the patients showed significant improvement in the overall shoulder score and in the pain and function components of the score. There was no significant improvement in shoulder range of motion, except for shoulder flexion. An important finding was that there was no loss of strength in elbow extension following the loss of the long head of triceps muscle. It was concluded that the long head of triceps interposition flap is useful in the reconstruction of the massive rotator cuff tear.     

Development of an Arthroscopic Joint Capsule Injury Model in the Canine Shoulder

Background

The natural history of rotator cuff tears can be unfavorable as patients develop fatty infiltration and muscle atrophy that is often associated with a loss of muscle strength and shoulder function. To facilitate study of possible biologic mechanisms involved in early degenerative changes to rotator cuff muscle and tendon tissues, the objective of this study was to develop a joint capsule injury model in the canine shoulder using arthroscopy.

Methods

Arthroscopic surgical methods for performing a posterior joint capsulectomy in the canine shoulder were first defined in cadavers. Subsequently, one canine subject underwent bilateral shoulder joint capsulectomy using arthroscopy, arthroscopic surveillance at 2, 4 and 8 weeks, and gross and histologic examination of the joint at 10 weeks.

Results

The canine subject was weight-bearing within eight hours after index and follow-up surgeries and had no significant soft tissue swelling of the shoulder girdle or gross lameness. Chronic synovitis and macroscopic and microscopic evidence of pathologic changes to the rotator cuff bony insertions, tendons, myotendinous junctions and muscles were observed.

Conclusions

This study demonstrates feasibility and proof-of-concept for a joint capsule injury model in the canine shoulder. Future work is needed to define the observed pathologic changes and their role in the progression of rotator cuff disease. Ultimately, better understanding of the biologic mechanisms of early progression of rotator cuff disease may lead to clinical interventions to halt or slow this process and avoid the more advanced and often irreversible conditions of large tendon tears with muscle fatty atrophy.     

The effect of glenohumeral plane of elevation on supraspinatus subacromial proximity

Shoulder pain is a common clinical problem affecting most individuals in their lifetime. Despite the high prevalence of rotator cuff pathology in these individuals, the pathogenesis of rotator cuff disease remains unclear. Position and motion related mechanisms of rotator cuff disease are often proposed, but poorly understood. The purpose of this study was to determine the impact of systematically altering glenohumeral plane on subacromial proximities across arm elevation as measures of tendon compression risk. Three-dimensional models of the humerus, scapula, coracoacromial ligament, and supraspinatus were reconstructed from MRIs in 20 subjects. Glenohumeral elevation was imposed on the humeral and supraspinatus tendon models for three glenohumeral planes, which were chosen to represent flexion, scapular plane abduction, and abduction based on average values from a previous study of asymptomatic individuals. Subacromial proximity was quantified as the minimum distance between the supraspinatus tendon and coracoacromial arch (acromion and coracoacromial ligament), the surface area of the supraspinatus tendon within 2 mm proximity to the coracoacromial arch, and the volume of intersection between the supraspinatus tendon and coracoacromial arch. The lowest modeled subacromial supraspinatus compression measures occurred during flexion at lower angles of elevation. This finding was consistent across all three measures of subacromial proximity. Knowledge of this range of reduced risk may be useful to inform future studies related to patient education and ergonomic design to prevent the development of shoulder pain and dysfunction.     

Effect of biceps-to-triceps transfer on rotator cuff stress during upper limb weight-bearing lift in tetraplegia: A modeling and simulation analysis

Rotator cuff stress during upper limb weight-bearing lifts presumably contribute to rotator cuff disease, which is the most common cause of shoulder pain in individuals with tetraplegia. Elbow extension strength appears to be a key determinant of rotator cuff stress during upper limb weight-bearing lifts since individuals with paraplegia who generate greater elbow extensor moments experience lower rotator cuff stress relative to individuals with tetraplegia. Biceps-to-triceps transfer surgery can increase elbow extension strength in individuals with tetraplegia. The purpose of this study was to determine whether active elbow extension via biceps transfer decreases rotator cuff stress during weight-bearing lifts in individuals with tetraplegia. A forward dynamics computational framework was used to estimate muscle stress during the lift; stress was computed as muscle force divided by the peak isometric muscle force. We hypothesized that rotator cuff stresses would be lower in simulated lifting with biceps transfer relative to simulated lifting without biceps transfer. We found that limited elbow extension strength in individuals with tetraplegia, regardless of whether elbow strength is enabled via biceps transfer or is residual after spinal cord injury, results in muscle stresses exceeding 85% of the peak isometric muscle stress in the supraspinatus, infraspinatus, and teres minor. The rotator cuff stresses we estimated suggest that performance of weight-bearing activities should be minimized or assisted in order to reduce the risk for shoulder pain. Our results also indicate that biceps transfer is unlikely to decrease rotator cuff stress during weight-bearing lifts in individuals with tetraplegia.     

Shoulder muscle function depends on elbow joint position: an illustration of dynamic coupling in the upper limb

Shoulder muscle function has been documented based on muscle moment arms, lines of action and muscle contributions to contact force at the glenohumeral joint. At present, however, the contributions of individual muscles to shoulder joint motion have not been investigated, and the effects of shoulder and elbow joint position on shoulder muscle function are not well understood. The aims of this study were to compute the contributions of individual muscles to motion of the glenohumeral joint during abduction, and to examine the effect of elbow flexion on shoulder muscle function. A three-dimensional musculoskeletal model of the upper limb was used to determine the contributions of 18 major muscles and muscle sub-regions of the shoulder to glenohumeral joint motion during abduction. Muscle function was found to depend strongly on both shoulder and elbow joint positions. When the elbow was extended, the middle and anterior deltoid and supraspinatus were the greatest contributors to angular acceleration of the shoulder in abduction. In contrast, when the elbow was flexed at 90°, the anterior deltoid and subscapularis were the greatest contributors to joint angular acceleration in abduction. This dependence of shoulder muscle function on elbow joint position is explained by the existence of dynamic coupling in multi-joint musculoskeletal systems. The extent to which dynamic coupling affects shoulder muscle function, and therefore movement control, is determined by the structure of the inverse mass matrix, which depends on the configuration of the joints. The data provided may assist in the diagnosis of abnormal shoulder function, for example, due to muscle paralysis or in the case of full-thickness rotator cuff tears.     

Effects of a shoulder injury prevention strength training program on eccentric external rotator muscle strength and glenohumeral joint imbalance in female overhead activity athletes

Imbalance of the eccentrically-activated external rotator cuff muscles versus the concentrically-activated internal rotator cuff muscles is a primary risk factor for glenohumeral joint injuries in overhead activity athletes. Nonisokinetic dynamometer based strength training studies, however, have focused exclusively on resulting concentric instead of applicable eccentric strength gains of the external rotator cuff muscles. Furthermore, previous strength training studies did not result in a reduction in glenoumeral joint muscle imbalance, thereby suggesting that currently used shoulder strength training programs do not effectively reduce the risk of shoulder injury to the overhead activity athlete. Two collegiate women tennis teams, consisting of 12 women, participated in this study throughout their preseason training. One team (n = 6) participated in a 5-week, 4 times a week, external shoulder rotator muscle strength training program next to their preseason tennis training. The other team (n = 6) participated in a comparable preseason tennis training program, but did not conduct any upper body strength training. Effects of this strength training program were evaluated by comparing pre- and posttraining data of 5 maximal eccentric external immediately followed by concentric internal contractions on a Kin-Com isokinetic dynamometer (Chattecx Corp., Hixson, Tennessee). Overall, the shoulder strength training program significantly increased eccentric external total work without significant effects on concentric internal total work, concentric internal mean peak force, or eccentric external mean peak force. In conclusion, by increasing the eccentric external total exercise capacity without a subsequent increase in the concentric internal total exercise capacity, this strength training program potentially decreases shoulder rotator muscle imbalances and the risk for shoulder injuries to overhead activity athletes.     

An MRI Study of Symptomatic Adhesive Capsulitis

Background

Appilication of MR imaging to diagnose Adhesive Capsulitis (AC) has previously been described. However, there is insufficient information available for the MRI analysis of AC. This study is to describe and evaluate the pathomorphology of the shoulder in Asian patients with AC compared to healthy volunteers.

Methodology/Principal Findings

60 Asian patients with clinically diagnosed AC and 60 healthy volunteers without frozen shoulder underwent MRI of the shoulder joint. All subjects who were age- and sex-matched control ones underwent routine MRI scans of the affected shoulder, including axial, oblique coronal, oblique sagittal T1WI SE and coronal oblique T2WI FSE sequences. Significant abnormal findings were observed on MRI, especially at the rotator cuff interval. The coracohumeral ligament (CHL), articular capsule thickness in the rotator cuff interval as well as the fat space under coracoid process were evaluated. MRI showed that patients with adhesive capsulitis had a significantly thickened coracohumeral ligament and articular capsule in the rotator cuff interval compared to the control subjects (4.2 vs. 2.4 mm, 7.2 vs. 4.4 mm; p<0.05). Partial or complete obliteration of the subcoracoid fat triangle was significantly more frequent in patients with adhesive capsulitis compared with control subjects (73% vs. 13%, 26% vs. 1.6%; p<0.001). Synovitis-like abnormality around the long biceps tendon was significantly more common in patients with adhesive capsulitis than in control subjects. With regards to the inter-observer variability, two MR radiologists had an excellent kappa value of 0.86.

Conclusions/Significance

MRI can be used to show characteristic findings in diagnosing AC. Thickening of the CHL and the capsule at the rotator cuff interval and complete obliteration of the fat triangle under the coracoid process have been shown to be the most characteristic MR findings seen with AC.     

Comparison of an EMG-based and a stress-based method to predict shoulder muscle forces

The estimation of muscle forces in musculoskeletal shoulder models is still controversial. Two different methods are widely used to solve the indeterminacy of the system: electromyography (EMG)-based methods and stress-based methods. The goal of this work was to evaluate the influence of these two methods on the prediction of muscle forces, glenohumeral load and joint stability after total shoulder arthroplasty. An EMG-based and a stress-based method were implemented into the same musculoskeletal shoulder model. The model replicated the glenohumeral joint after total shoulder arthroplasty. It contained the scapula, the humerus, the joint prosthesis, the rotator cuff muscles supraspinatus, subscapularis and infraspinatus and the middle, anterior and posterior deltoid muscles. A movement of abduction was simulated in the plane of the scapula. The EMG-based method replicated muscular activity of experimentally measured EMG. The stress-based method minimised a cost function based on muscle stresses. We compared muscle forces, joint reaction force, articular contact pressure and translation of the humeral head. The stress-based method predicted a lower force of the rotator cuff muscles. This was partly counter-balanced by a higher force of the middle part of the deltoid muscle. As a consequence, the stress-based method predicted a lower joint load (16% reduced) and a higher superior–inferior translation of the humeral head (increased by 1.2 mm). The EMG-based method has the advantage of replicating the observed cocontraction of stabilising muscles of the rotator cuff. This method is, however, limited to available EMG measurements. The stress-based method has thus an advantage of flexibility, but may overestimate glenohumeral subluxation.     

Predicting Rotator Cuff Tears Using Data Mining and Bayesian Likelihood Ratios

Objectives

Rotator cuff tear is a common cause of shoulder diseases. Correct diagnosis of rotator cuff tears can save patients from further invasive, costly and painful tests. This study used predictive data mining and Bayesian theory to improve the accuracy of diagnosing rotator cuff tears by clinical examination alone.

Methods

In this retrospective study, 169 patients who had a preliminary diagnosis of rotator cuff tear on the basis of clinical evaluation followed by confirmatory MRI between 2007 and 2011 were identified. MRI was used as a reference standard to classify rotator cuff tears. The predictor variable was the clinical assessment results, which consisted of 16 attributes. This study employed 2 data mining methods (ANN and the decision tree) and a statistical method (logistic regression) to classify the rotator cuff diagnosis into “tear” and “no tear” groups. Likelihood ratio and Bayesian theory were applied to estimate the probability of rotator cuff tears based on the results of the prediction models.

Results

Our proposed data mining procedures outperformed the classic statistical method. The correction rate, sensitivity, specificity and area under the ROC curve of predicting a rotator cuff tear were statistical better in the ANN and decision tree models compared to logistic regression. Based on likelihood ratios derived from our prediction models, Fagan''s nomogram could be constructed to assess the probability of a patient who has a rotator cuff tear using a pretest probability and a prediction result (tear or no tear).

Conclusions

Our predictive data mining models, combined with likelihood ratios and Bayesian theory, appear to be good tools to classify rotator cuff tears as well as determine the probability of the presence of the disease to enhance diagnostic decision making for rotator cuff tears.     

Treatment of lesions of the rotator cuff

The impingement syndrome and tendinopathy of the rotator cuff are the most common causes (complaints) of pain and disability of the shoulder. The aim of this study is to evaluate the efficacy of a specific rehabilitative protocol, integrated with the administration of a nutritional supplement, in the conservative rehabilitative treatment, as well as in post-surgery, of patients with lesions of the rotator cuff. Two groups with syndrome of the rotator cuff were formed to follow different therapeutic courses, in relation to the choice of each subject to undergo the conservative treatment (Arm A) or the surgical one (Arm B). In Arm A the study included the association of therapy with ESWT (shock waves) with the proprioceptive Multi Joint System, for rehabilitating joint movement and muscle strength of the shoulder, and a specific nutritional supplement to reduce the pain and conserve the cartilage tissue. Between February 2009 and June 2009, we enrolled 30 subjects (randomized into three homogenous groups A1, A2, A3), average age 45±10 years, with rotator cuff syndrome with calcification of the shoulder, diagnosed through clinical examination and investigative instruments (X-ray, echography or NMR). In Arm B, from September 2009 to January 2010, we enrolled 50 patients (randomized into two groups, B1 and B2), 24 male (average age 58.4: min 28 and max 78) and 26 females (average age 59.5: min 30 and max 80), who had undergone rotator cuff operations and acromionplasty for non-massive lesions without important gleno-humeral instability, with either open or arthroscopic procedures. The analysis of the results of Arm A highlights that in terms of reducing pain the main benefits were found in Group A1 where the supplement was given. From the analysis of the data of Arm B, in both groups an improvement of the first 4 items evaluated was evident. In Group B1, 84 percent of the patients declared to be satisfied and improved and 16 percent were dissatisfied; in Group B2, where the nutritional supplement was given, 92 percent were satisfied and 8 percent were dissatisfied. In conclusion, we retain that in cases of rotator cuff syndrome, an integrated rehabilitative approach, whether conservative or post-surgical, directed at taking total control of the patient, must observe particular attention to the optimization of the articular tissular metabolic balance in order to favour better functional recovery.