Purification and characterization of extracellular cholesterol oxidase from <Emphasis Type="Italic">Enterobacter</Emphasis> sp.

The objective of this work is to obtain an abundant source of cholesterol oxidases for industrial and medicinal needs. Thirteen bacterial strains that express high level of inducible extracellular cholesterol oxidase (COX) were isolated from carnivore feces. One of these strains, named COX8-9, belonging to the genus Enterobacter, was found to produce the highest level of cholesterol oxidase. COX from strain COX8-9 was purified from the culture supernatant by ultrafiltration followed with two consecutive Q-Sepharose chromatographies at different pH values, and then by Superdex-75 gel filtration. The purified enzyme was a monomer with a molecular weight of 58 kDa, and exhibited maximum absorption at 280 nm. The K _m value for oxidation of cholesterol by this enzyme was 1.2 × 10⁻⁴ M, with optimum activity at pH 7.0. Enzymatic activity of COX was enhanced 3-fold in the presence of metal ion Cu²⁺, and the enzyme was stable during long-term aqueous storage under various temperatures, indicating its potential as a clinical diagnostic reagent. Preparation and characterization of cholesterol oxidases from the other selected strains are under way. Deping Ye and Jiahong Lei are contributed equally to this work.     

Characterization of trehalose synthase from <Emphasis Type="Italic">Corynebacterium nitrilophilus</Emphasis> NRC

Trehalose synthase (TSII) from Corynebacterium nitrilophilus NRC was successively purified by ammonium sulphate precipitation, ion exchange chromatography on DEAE-cellulose and gel filtration chromatography on Sephadex G-100 columns. The specific activity of the trehalose synthase was increased ~200-fold, from 0.14 U mg⁻¹ protein to 28.3 U mg⁻¹ protein. TSII was found to be a monomeric protein with a molecular weight of 67–69 kDa. Characterization of the enzyme exhibited optimum pH and temperature were 7.5 and 35°C, respectively. The purified enzyme was stable from pH 6.6 to 7.8 and able to prolong its thermal stability up to 35°C. The enzyme activity was inhibited strongly by Zn²⁺, Hg²⁺ and Cu²⁺ and moderately by Ba²⁺, Fe²⁺, Pb²⁺ and Ni²⁺. Other metal ions Ca²⁺, Mg²⁺, Co²⁺, Mn²⁺ and EDTA had almost no effect.     

Characterization of an extracellular alkaline serine protease from marine <Emphasis Type="Italic">Engyodontium album</Emphasis> BTMFS10

An alkaline protease from marine Engyodontium album was characterized for its physicochemical properties towards evaluation of its suitability for potential industrial applications. Molecular mass of the enzyme by matrix-assisted laser desorption ionization-mass spectrometry (MALDI-MS) analysis was calculated as 28.6 kDa. Isoelectric focusing yielded pI of 3–4. Enzyme inhibition by phenylmethylsulfonyl fluoride (PMSF) and aprotinin confirmed the serine protease nature of the enzyme. K _m, V _max, and K _cat of the enzyme were 4.727 × 10⁻² mg/ml, 394.68 U, and 4.2175 × 10⁻² s⁻¹, respectively. Enzyme was noted to be active over a broad range of pH (6–12) and temperature (15–65°C), with maximum activity at pH 11 and 60°C. CaCl₂ (1 mM), starch (1%), and sucrose (1%) imparted thermal stability at 65°C. Hg²⁺, Cu²⁺, Fe³⁺, Zn²⁺, Cd⁺, and Al³⁺ inhibited enzyme activity, while 1 mM Co²⁺ enhanced enzyme activity. Reducing agents enhanced enzyme activity at lower concentrations. The enzyme showed considerable storage stability, and retained its activity in the presence of hydrocarbons, natural oils, surfactants, and most of the organic solvents tested. Results indicate that the marine protease holds potential for use in the detergent industry and for varied applications.     

Purification and characterization of endoxylanase Xln-1 from <Emphasis Type="Italic">Aspergillus niger</Emphasis> B03

An extracellular endoxylanase was isolated from the xylanolytic complex of Aspergillus niger B03. The enzyme was purified to a homogenous form using consecutive ultrafiltration and anion exchange chromatography. The endoxylanase was a monomer protein with a molecular weight of 33,000 Da determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis, and 34,000 Da determined by gel filtration. The optimal pH and temperature values for the enzyme action were 6.0 and 60°C, respectively. Endoxylanase was stable at 40°C, pH 7.0 for 210 min. The thermal stability of the enzyme was significantly increased in the presence of glycerol and sorbitol. The enzyme activity was inhibited by Cu²⁺, Fe²⁺, Fe³⁺, and Ag¹⁺, and it was activated by Mn²⁺. The substrate specificity and kinetic parameters of the enzyme were determined with different types of xylans. Endoxylanase displayed maximum activity in the case of oat spelt xylan, with an apparent K _m value of 8.19 mg/ml. The substrate specificity and the product profile of the enzyme suggested it to be an endoxylanase.     

Anionic Trypsin from North Pacific Krill (<Emphasis Type="Italic">Euphausia pacifica</Emphasis>): Purification and Characterization

An anionic trypsin (TRY-EP) was purified from North Pacific krill (Euphausia pacifica) by ammonium sulfate precipitation, ion-exchange and gel-filtration chromatography. The purified enzyme was identified as a trypsin by LC-ESI-MS/MS analysis. The relative molecular mass of TRY-EP was 33 kDa, with isoelectric point of 4.5. The histidine, tryptophan, arginine, lysine, aspartic acid and glutamic acid residues were functional groups to TRY-EP. TRY-EP was activated by Ca²⁺ and Mg²⁺ and inhibited by some heavy metal ions (Zn²⁺, Cu²⁺, Pb²⁺ and Hg²⁺), organic solvents (ethanol, glycerin, DMSO and acetone) and specific trypsin inhibitors (benzamidine, CEOM, SBTI and TLCK). TRY-EP was active over a wide pH (6.0–11.0) and temperature (10–70°C) range, with optimum of pH 9.0 and 40–50°C. TRY-EP was stable between pH 6.0 and 11.0 and below 30°C. Compared with some trypsins from the Temperate and Tropical Zone organisms, TRY-EP and other trypsins from the Frigid Zone organisms have higher affinity to substrate and 2–42-fold physiological efficiency.     

Cloning,purification and characterization of an alkali-stable endoxylanase from thermophilic <Emphasis Type="Italic">Geobacillus</Emphasis> sp. 71

The gene encoding a xylanase from Geobacillus sp. 71 was isolated, cloned, and sequenced. Purification of the Geobacillus sp 7.1 xylanase, XyzGeo71, following overexpression in E. coli produced an enzyme of 47 kDa with an optimum temperature of 75°C. The optimum pH of the enzyme is 8.0, but it is active over a broad pH range. This protein showed the highest sequence identity (93%) with the xylanase from Geobacillus thermodenitrificans NG80-2. XyzGeo71 contains a catalytic domain that belongs to the glycoside hydrolase family 10 (GH10). XyzGeo71 exhibited good pH stability, remaining stable after treatment with buffers ranging from pH 7.0 to 11.0 for 6 h. Its activity was partially inhibited by Al³⁺ and Cu²⁺ but strongly inhibited by Hg²⁺. The enzyme follows Michaelis–Menten kinetics, with K_m and V_max values of 0.425 mg xylan/ml and 500 μmol/min.mg, respectively. The enzyme was free from cellulase activity and degraded xylan in an endo fashion. The action of the enzyme on oat spelt xylan produced xylobiose and xylotetrose.     

Catalytic properties of the immobilized Talaromyces thermophilus β-xylosidase and its use for xylose and xylooligosaccharides production

The present study explores the efficiency of Talaromyces thermophilus β-xylosidase, in the production of xylose and xylooligosaccharides. The β-xylosidase was immobilized by different methods namely ionic binding, entrapment and covalent coupling and using various carriers. Chitosan, pre-treated with glutaraldehyde, was selected as the best support material for β-xylosidase immobilization; it gave the highest immobilization and activity yields (94%, 87%, respectively) of initial activity, and also provided the highest stability, retaining 94% of its initial activity even after being recycled 25 times. Shifts in the optimal temperature and pH were observed for the immobilized β-xylosidase when compared to the free enzyme. The maximal activity obtained for the immobilized enzyme was achieved at pH 8.0 and 53 °C, whereas that for the free enzyme was obtained at pH 7.0 and 50 °C. The immobilized enzyme was more thermostable than the free β-xylosidase. We observed an increase of the K_m values of the free enzyme from 2.37 to 3.42 mM at the immobilized state. Native and immobilized β-xylosidase were found to be stimulated by Ca²⁺, Mn²⁺ and Co²⁺ and to be inhibited by Zn²⁺, Cu²⁺, Hg²⁺, Fe²⁺, EDTA and SDS. Immobilized enzyme was found to catalyze the reverse hydrolysis reaction, forming xylooligosaccharides in the presence of a high concentration of xylose. In order to examine the synergistic action of xylanase and β-xylosidase of T. thermophilus, these two enzymes were co-immobilized on chitosan. A continuous hydrolysis of 3% Oat spelt xylan at 50 °C was performed and better hydrolysis yields and higher amount of xylose was obtained.     

Expression and characterization of <Emphasis Type="Italic">Trichoderma virens</Emphasis> UKM-1 endochitinase in <Emphasis Type="Italic">Escherichia</Emphasis> <Emphasis Type="Italic">coli</Emphasis>

A gene encoding endochitinase from Trichoderma virens UKM-1 was cloned and expressed in E. coli BL21 (DE3). Both the endochitinase gene and its cDNA sequences were obtained. The endochitinase gene encodes 430 amino acids from an open reading frame comprising of 1,690 bp nucleotide sequence with three introns. The endochitinase was expressed as soluble and active enzyme at 20°C when induced with 1 mM IPTG. Maximum activity was observed at 4 h of post-induction time. SDS-PAGE showed that the purified endochitinase exhibited a single band with molecular weight of 42 kDa. Biochemical characterization of the enzyme displayed a near neutral pH characteristic with an optimum pH at 6.0 and optimum temperature at 50°C. The enzyme is stable between pH 3.0–7.0 and is able to retain its activity from 30 to 60°C. The presence of Mg²⁺ and Ca²⁺ ions increased the enzyme activity up to 20%. The purified enzyme has a strong affinity towards colloidal chitin and low effect on ethyl cellulose and D-cellubiose which are non-chitin related substrates. HPLC analysis from the chitin hydrolysis showed the release of (GlcNAc)₃, (GlcNAc)₂ and GlcNAc, in which (GlcNAc)₂ was the main product.     

L-<Emphasis Type="Italic">myo</Emphasis>-inositol-1-phosphate synthase: partial purification and characterisation from <Emphasis Type="Italic">Gleichenia glauca</Emphasis>

A screening for the enzyme L-myo-inositol-1-phosphate synthase [EC 5.5.1.4] has been made first time in both vegetative and reproductive parts of the representative members of pteridophytes: Lycopodium, Selaginella, Equisetum, Polypodium, Dryopteris, and Gleichenia. The enzyme has been partially purified following low-speed centrifugation, streptomycin sulphate precipitation, ammonium sulphate fractionation, chromatography on DEAE-cellulose and gel-filtration through Sephadex G-200, and characterised from the reproductive pinnules of Gleichenia glauca Smith. The enzyme has a pH optimum at 7.5. The K_m for glucose-6-P and NAD⁺ were 0.922 × 10^–3 M and 0.9 × 10^–4 M, respectively. A basal activity of the enzyme has been recorded in absence of exogenous NAD⁺. The enzyme activity was augmented with NH₄Cl, but heavy metals like Hg²⁺, Cu²⁺ and Zn²⁺ inactivated it.     

Optimized expression of an acid xylanase from <Emphasis Type="Italic">Aspergillus usamii</Emphasis> in <Emphasis Type="Italic">Pichia pastoris</Emphasis> and its biochemical characterization

The xylanase gene xyn II from Aspergillus usamii E001 was placed under the control of an alcohol oxidase promoter (AOX1) in the plasmid pPIC9K and integrated into the genome of a methylotrophic yeast, P. pastoris GS115, by electroporation. His⁺ transformants were screened for on the basis of their resistance to G418 and activity assay. A transformant, P. pastoris GSC12, which showed resistance to over 6 mg G418/ml and highest xylanase activity was selected. Recombinant xylanase was secreted by P. pastoris GSC12 24 h after methanol induction of shake-flask cultures, and reached a final yield of 3139. About 68 U/mg 120 h after the induction. The molecular mass of this xylanase was estimated to be 21 kDa by SDS-PAGE. The optimum pH and temperature were 4.2 and 50 °C, respectively. Xylanase was stable below 50 °C and within pH 3.0–7.0. Its activity was increased by EDTA and Co²⁺ ion and strongly inhibited by Mn²⁺, Li⁺ and Ag⁺ ions. The K _m and V _max values with birchwood xylan as the substrate were found to be 5.56 mg/ml and 216 μmol/mg/min, respectively. This is the first report on expression and characterization of xylanase from A. usamii in P. pastoris. The hydrolysis products consisted of xylooligosaccharides together with a small amount of xylose. This property made the enzyme attractive for industrial purposes, as relatively pure xylooligosaccharides could be obtained.     

A novel alkalo- and thermostable phospholipase D from <Emphasis Type="Italic">Streptomyces olivochromogenes</Emphasis>

A 60 kDa phospholipase D (PLD) was obtained from Streptomyces olivochromogenes by one-step chromatography on Sepharose CL-6B. Maximal activity was at pH 8 and 75°C and the enzyme was stable from pH 7 to 13 and from 55 to 75°C. Thermal and pH stability with temperature optimum of the enzyme were highest among Streptomyces PLDs reported so far. The activity was Ca²⁺-dependent and enhanced by detergents. The Km and Vmax values for phosphatidylcholine were 0.6 mM and 650 μmol min⁻¹ mg⁻¹, respectively. In addition, the enzyme also revealed transphosphatidylation activity, which was optimum at pH 8 and 50°C. The first 15 amino acid residues of the N terminal sequence were ADYTPGAPGIGDPYY, which are significantly different from the other known PLDs. The enzyme may therefore be a novel PLD with potential application in the lipid industry.     

Cloning and characterization of a novel <Emphasis Type="SmallCaps">l</Emphasis>-arabinose isomerase from <Emphasis Type="Italic">Bacillus licheniformis</Emphasis>

Based on analysis of the genome sequence of Bacillus licheniformis ATCC 14580, an isomerase-encoding gene (araA) was proposed as an l-arabinose isomerase (L-AI). The identified araA gene was cloned from B. licheniformis and overexpressed in Escherichia coli. DNA sequence analysis revealed an open reading frame of 1,422 bp, capable of encoding a polypeptide of 474 amino acid residues with a calculated isoelectric point of pH 4.8 and a molecular mass of 53,500 Da. The gene was overexpressed in E. coli, and the protein was purified as an active soluble form using Ni–NTA chromatography. The molecular mass of the purified enzyme was estimated to be ~53 kDa by sodium dodecyl sulfate–polyacrylamide gel electrophoresis and 113 kDa by gel filtration chromatography, suggesting that the enzyme is a homodimer. The enzyme required a divalent metal ion, either Mn²⁺or Co²⁺, for enzymatic activity. The enzyme had an optimal pH and temperature of 7.5 and 50°C, respectively, with a k _cat of 12,455 min⁻¹ and a k _cat/K _m of 34 min⁻¹ mM⁻¹ for l-arabinose, respectively. Although L-AIs have been characterized from several other sources, B. licheniformis L-AI is distinguished from other L-AIs by its wide pH range, high substrate specificity, and catalytic efficiency for l-arabinose, making B. licheniformis L-AI the ideal choice for industrial applications, including enzymatic synthesis of l-ribulose. This work describes one of the most catalytically efficient L-AIs characterized thus far.     

Atypical Ca<Superscript>2+</Superscript>-independent,raw-starch hydrolysing α-amylase from <Emphasis Type="Italic">Bacillus</Emphasis> sp. GRE1: characterization and gene isolation

Bacillus sp. GRE1 isolated from an Ethiopian hyperthermal spring produced raw-starch digesting, Ca²⁺-independent thermostable α-amylase. Enzyme production in shake flask experiments using optimum nutrient supplements and environmental conditions was 2,360 U l⁻¹. Gel filtration chromatography yielded a purification factor of 33.6-fold and a recovery of 46.5%. The apparent molecular weight of the enzyme was 55 kDa as determined by SDS-PAGE. Presence or absence of Ca²⁺ produced similar temperature optima of 65–70°C. The optimum pH was in the range of 5.5–6.0. The enzyme maintained 50% of its original activity after 45 min of incubation at 80°C and was stable at a pH range of 5.0–9.0. The V _max and K _m values for soluble starch were 42 mg reducing sugar min⁻¹ and 4.98 mg starch ml⁻¹, respectively. Strong inhibitors of enzyme activity included Cu²⁺, Zn²⁺ and Fe²⁺. The enzyme coding gene and the deduced protein translation revealed a characteristic but markedly atypical homology to Bacillus species α-amylase sequences. The enzyme hydrolyzed wheat, corn and tapioca starch granules efficiently below their gelatinization temperatures. Rather than the higher oligosaccharides normally produced by Bacillus α-amylases operating at high temperatures, maltose was the major hydrolysis product with the present enzyme.     

Purification and properties of extracellular phytase from Bacillus sp. KHU-10

Bacillus species producing a thermostable phytase was isolated from soil, boiled rice, and mezu (Korean traditinal koji). The activity of phytase increased markedly at the late stationary phase. An extracellular phytase from Bacillus sp. KHU-10 was purified to homogeneity by acetone precipitation and DEAE-Sepharose and phenyl-Sepharose column chromatographies. Its molecular weight was estimated to be 46 kDa on gel filtration and 44 kDa on SDS-polyacrylamide gel elctrophoresis. Its optimum pH and temperature for phytase activity were pH 6.5-8.5 and 40°C without 10 mM CaCl₂ and pH 6.0-9.5 and 60°C with 10 mM CaCl₂. About 50% of its original activity remained after incubation at 80°C or 10 min in the presence of 10 mM CaCl₂. The enzyme activity was fairly stable from pH 6.5 to 10.0. The enzyme had an isoelectric point of 6.8. As for substrate specificity, it was very specific for sodium phytate and showed no activity on other phosphate esters. The K _m value for sodium phytate was 50 M. Its activity was inhibited by EDTA and metal ions such as Ba²⁺, Cd²⁺, Co²⁺, Cr³⁺, Cu²⁺, Hg²⁺, and Mn²⁺ ions.     

Purification of lipase from Geotrichum candidum: conditions optimized for enzyme production using Box–Behnken design

The fungus Geotrichum candidum was selected from isolates of oil-mill waste as a potent lipase producer. Factors affecting lipase production by the fungus G. candidum in yeast-extract-peptone medium have been optimized by using a Box–Behnken design with seven variables to identify the significant correlation between effects of these variables in the production of the enzyme lipase. The experimental values were found to be in accordance with the predicted values, the correlation coefficient is 0.9957. It was observed that the variables days (6), pH (7.0), temperature (30 °C), carbon (1.25%), nitrogen (2.0%), Tween (1.0%) and salt concentrations (0.5 mM) were the optimum conditions for maximum lipase production (87.7 LU/ml). The enzyme was purified to homogeneity with an apparent molecular mass of 32 kDa by SDS-PAGE. The optimum pH at 40 °C was 7.0 and the optimum temperature at pH 7.0 was 40 °C. The enzyme was stable within a pH range of 6.5 to 8.5 at 30 °C for 24 h. The enzyme activity was strongly inhibited by AgNO₃, NiCl₂, HgCl₂, and EDTA. However, the presence of Ca²⁺ and Ba²⁺ ions enhanced the activity of the enzyme.     

Gene cloning,expression, and characterization of a novel trehalose synthase from <Emphasis Type="Italic">Arthrobacter aurescens</Emphasis>

Trehalose synthase (TreS) is an intramolecular transglycosylase. It specially catalyzes the conversion of maltose and trehalose. In this study, a novel treS gene, which had a length of 1,797 bp and encoded 598 amino acids, was cloned from Arthrobacter aurescens CGMCC 1.1892 and expressed in Escherichia coli. Thin layer chromatography results indicated that it could catalyze the conversion between maltose and trehalose in one step. However, the ion chromatography results showed that, as a byproduct, about 13% glucose was also produced. The purified recombinant enzyme had a molecular weight of 68 kDa and showed its optimal activity at 35 °C and pH 6.5. This enzyme was not thermostable, and its activity was increased by 1 mM Mg²⁺, Mn²⁺, and Ca²⁺ while strongly inhibited by 5 mM Cu²⁺ and SDS.     

Improved production and properties of β-glucosidase influenced by 2-deoxy-<Emphasis Type="SmallCaps">d</Emphasis>-glucose in the culture medium of <Emphasis Type="Italic">Termitomyces clypeatus</Emphasis>

Increased production, secretion, and activity of β-glucosidase in the filamentous fungus Termitomyces clypeatus was achieved in presence of the glycosylation inhibitor 2-deoxy-d-glucose (0.05%, w/v) during submerged fermentation. Enzyme activity increased to 163 U/mL by adding mannose (2 mg/mL) to the medium. Such a high enzyme activity has not been achieved without mutation or genetic manipulation. The K_m and V_max of the enzyme in culture medium were determined to be 0.092 mM and 35.54 U/mg, respectively, with p-nitrophenyl β-d-glucopyranoside as substrate, confirming its high catalytic activity. The enzyme displayed optimum activity at pH 5.4 and 45°C. The enzyme was fairly stable between acidic to alkaline pH and retained about 75 ∼ 65% residual activities between pH 4 and 10.6 and demonstrated full activity at 45°C for 3 days. The enzyme was also stable in the presence of Zn²⁺ and Mg²⁺ and 80% of the residual activity was observed in the presence of Mn²⁺, Ca²⁺, K⁺, Cu²⁺, EDTA, and sodium azide. Around 70% of the activity was retained in the presence of 2 M guanidium HCl and 3 M urea, whereas the activity was 5 and 2 times higher in the presence of 4 mM beta-mercaptoethanol and 50 mM DTT, respectively. The enzyme obtained from the culture filtrate showed potential cellulose saccharifying ability which increased further when supplemented with commercial cellulase. Thus, this enzyme could be used without any additional downstream processing for commercial cellulase preparation and production of bioethanol or for other biotechnological applications.     

Purification and characterization of a <Emphasis Type="Italic">N</Emphasis>-acetylglucosaminidase produced by <Emphasis Type="Italic">Talaromyces emersonii</Emphasis> during growth on algal fucoidan

A β-N-acetylglucosaminidase produced by a novel fungal source, the moderately thermophilic aerobic ascomycete Talaromyces emersonii, was purified to apparent homogeneity. Submerged fermentation of T. emersonii, in liquid medium containing algal fucoidan as the main carbon source, yielded significant amounts of extracellular N-acetylglucosaminidase activity. The N-acetylglucosaminidase present in the culture-supernatant was purified by hydrophobic interaction chromatography and preparative electrophoresis. The enzyme is a dimer with molecular weight and pI values of 140 and 3.85, respectively. Substrate specificity studies confirmed the glycan specificity of the enzyme for N-acetylglucosamine. Michaelis-Menten kinetics were observed during enzyme-catalyzed hydrolysis of the fluorescent substrate methylumbelliferyl-β-D-N-acetylglucosaminide at 50°C, pH 5.0 (K_m value of 0.5 mM). The purified N-acetylglucosaminidase displayed activity over broad ranges of pH and temperature, yielding respective optimum values of pH 5.0 and 75°C. The T. emersonii enzyme was less susceptible to inhibition by N-acetylglucosamine and other related sugars than orthologs from other sources. The enzyme was sensitive to Hg²⁺, Co²⁺ and Fe³⁺.     

Characterization of hyperthermostable α-amylase from Geobacillus sp. IIPTN

A newly isolated Geobacillus sp. IIPTN (MTCC 5319) from the hot spring of Uttarakhand's Himalayan region produced a hyperthermostable α-amylase. The microorganism was characterized by biochemical tests and 16S rRNA gene sequencing. The optimal temperature and pH were 60°C and 6.5, respectively, for growth and enzyme production. Although it was able to grow in temperature ranges from 50 to 80°C and pH 5.5–8.5. Maximum enzyme production was in exponential phase with activity 135 U ml⁻¹ at 60°C. Assayed with cassava as substrate, the enzyme displayed optimal activity 192 U ml⁻¹ at pH 5.0 and 80°C. The enzyme was purified to homogeneity with purification fold 82 and specific activity 1,200 U mg⁻¹ protein. The molecular mass of the purified enzyme was 97 KDa. The values of K _m and V _max were 36 mg ml⁻¹ and 222 μmol mg⁻¹ protein min⁻¹, respectively. The amylase was stable over a broad range of temperature from 40°C to 120°C and pH ranges from 5 to 10. The enzyme was stimulated with Mn²⁺, whereas it was inhibited by Hg²⁺, Cu²⁺, Zn²⁺, Mg²⁺, and EDTA, suggesting that it is a metalloenzyme. Besides hyperthermostability, the novelty of this enzyme is resistance against protease.