Co-expression of gene 31 and 23 products of bacteriophage T4

Folding of the major capsid protein of bacteriophage T4 encoded by gene 23 is aided by Escherichia coli GroEL chaperonin and phage co-chaperonin gp31. In the absence of gene product (gp) 31, aggregates of recombinant gp23 accumulate in the cell similar to inclusion bodies. These aggregates can be solubilized with 6 M urea. However, the protein cannot form regular structures in solution. A system of co-expression of gp31 and gp23 under the control of phage T7 promoter in E. coli cells has been constructed. Folding of entire-length gp23 (534 amino acid residues) in this system results in the correctly folded recombinant gp23, which forms long regular structures (polyheads) in the cell.     

Chaperonin-mediated folding of bacteriophage T4 major capsid protein. II. Production of gene product 23 deletion mutants

Folding of bacteriophage T4 major capsid protein, gene product 23 (534 a.a.), is aided by two proteins: E. coli GroEL chaperonin and viral gp31 co-chaperonin. In the present work a set of mutants with extensive deletions inside gene 23 using controlled digestion with Bal31 nuclease has been constructed. Proteins with deletions were co-expressed from plasmid vectors with phage gp31 co-chaperonin. Deletions from 8 to 33 a.a. in the N-terminal region of the gp23 molecule covering the protein proteolytic cleavage site during capsid maturation have no influence on the mutants' ability to produce in E. coli cells proteins which form regular structures—polyheads. Deletions in other regions of the polypeptide chain (187-203 and 367-476 a.a.) disturb the correct folding and subsequent assembly of gp23 into polyheads.     

Amber mutants in gene 67 of phage T4. Effects on formation and shape determination of the head

Two amber mutations in gene 67 of bacteriophage T4 were constructed by oligonucleotide-directed mutagenesis and the resulting mutated genes were recombined back into the phage genome and their phenotype was studied. The 67amK1 mutation is close to the amino terminus of the gene, and phage carrying this mutation are unable to form plaques on suppressor-negative hosts. A second mutation, 67amK2, which lies in the middle of the gene, three codons N-terminal to a proteolytic cleavage site, produces a small number of viable phage particles. In suppressor-negative hosts, both mutants produce polyheads and proheads. 67amK1 assembles only few proheads that have a disorganized core structure, as judged from thin sections of infected cells. The proheads and the mature phages of both mutants are mainly isometric rather than having the usual prolate shape. Depending on the 67 mutant and the host, between 20% and 73% of the particles that are produced are isometric, and 1 to 10% are two-tailed biprolate particles. 67amK2 phages grown on a supD suppressor strain that inserts serine in place of the wild-type leucine do not contain gp67* derived from gene product 67 (gp67) by proteolytic cleavage. This demonstrates the importance of the correct amino acid at this position in the protein. Other abnormalities in these 67amK2 phages are the presence of uncleaved scaffolding core proteins (IPIII and gp68), indicating a structural alteration in the prohead scaffold, resulting in only partial cleavage. In wild-type phages these proteins are found in the head only in the cleaved form. With double-mutants of 67 with mutations in the major shell protein gp23 no naked scaffolding cores were found, confirming the necessity of gp67 for the assembly or persistence of a "normal" core.     

The maturation-dependent conformational change of the major capsid protein of bacteriophage T4 involves a substantial change in secondary structure

We have investigated the conformational basis of the expansion transformation that occurs upon maturation of the bacteriophage T4 prohead, by using laser Raman spectroscopy to determine the secondary structure of the major capsid protein in both the precursor and the mature states of the surface lattice. This transformation involves major changes in the physical, chemical, and immunological properties of the capsid and is preceded in vivo by processing of its major protein, gp23 (56 kDa), to gp23* (49 kDa), by proteolysis of its N-terminal gp23-delta domain. The respective secondary structures of gp23 in the unexpanded state, and of gp23* in the expanded state, were determined from the laser Raman spectra of polyheads, tubular polymorphic variants of the capsid. Similar measurements were also made on uncleaved polyheads that had been expanded in vitro and, for reference, on thermally denatured polyheads. We find that, with or without cleavage of gp23, expansion is accompanied by substantial changes in secondary structure, involving a major reduction in alpha-helix content and an increase in beta-sheet. The beta-sheet contents of gp23* or gp23 in the expanded state of the surface lattice, and even of gp23 in the unexpanded state, are sufficient for a domain with the "jellyroll" fold of antiparallel beta-sheets, previously detected in the capsid proteins of other icosahedral viruses.(ABSTRACT TRUNCATED AT 250 WORDS)     

Evidence that a phage T4 DNA packaging enzyme is a processed form of the major capsid gene product

A phage T4 DNA packaging enzyme appears to arise as a processed form of the major T4 capsid structural protein gp23. The enzyme activity and antigen are missing from all head gene mutants that block the morphogenetic proteolytic processing reactions of the head proteins in vivo. The enzyme antigen can be formed in vitro by T4 (gp21) specific processing of gp23 containing extracts. Enzyme antigen is found in active processed proheads but not in full heads. The enzyme and the major capsid protein show immunological cross-reactivity, produce common peptides upon proteolysis, and share an assembly-conformation-dependent ATP binding site. The packaging enzyme and the mature capsid protein (gp23*) both appear to arise from processing of gp23, the former as a minor product of a specific gp23 structure in the prohead, acting in DNA packaging as a DNA-dependent ATPase, and a headful-dependent terminase.     

Assembly-dependent conformational changes in a viral capsid protein. Calorimetric comparison of successive conformational states of the gp23 surface lattice of bacteriophage T4

Inter- and intra-subunit bonding within the surface lattice of the capsid of bacteriophage T4 has been investigated by differential scanning calorimetry of polyheads, in conjunction with electron microscopy, limited proteolysis and sodium dodecyl sulfate/polyacrylamide gel electrophoresis. The bonding changes corresponding to successive stages of assembly of the major capsid protein gp23, including its maturation cleavage, were similarly characterized. The uncleaved/unexpanded surface lattice exhibits two endothermic transitions. The minor event, at 46 degrees C, does not visibly affect the surface lattice morphology and probably represents denaturation of the N-terminal domain of gp23. The major endotherm, at 65 degrees C, represents denaturation of the gp23 polymers. Soluble gp23 from dissociated polyheads is extremely unstable and exhibits no endotherm. Cleavage of gp23 to gp23* and the ensuing expansion transformation effects a major stabilization of the surface lattice of polyheads, with single endotherms whose melting temperatures (t*m) range from 73 to 81 degrees C, depending upon the mutant used and the fraction of gp23 that is cleaved to gp23* prior to expansion. Binding of the accessory proteins soc and hoc further modulates the thermograms of cleaved/expanded polyheads, and their effects are additive. hoc binding confers a new minor endotherm at 68 degrees C corresponding to at least partial denaturation of hoc. Denatured hoc nevertheless remains associated with the surface lattice, although in an altered, protease-sensitive state which correlates with delocalization of hoc subunits visualized in filtered images. While hoc binding has little effect on the thermal stability of the gp23* matrix, soc binding further stabilizes the surface lattice (delta Hd approximately +50%; delta t*m = +5.5 degrees C). It is remarkable that in all states of the surface lattice, the inter- and intra-subunit bonding configurations of gp23 appear to be co-ordinated to be of similar thermal stability. Thermodynamically, the expansion transformation is characterized by delta H much less than 0; delta Cp approximately 0, suggesting enhancement of van der Waals' and/or H-bonding interactions, together with an increased exposure to solvent of hydrophobic residues of gp23* in the expanded state. These findings illuminate hypotheses of capsid assembly based on conformational properties of gp23: inter alia, they indicate a role for the N-terminal portion of gp23 in regulating polymerization, and force a reappraisal of models of capsid swelling based on the swivelling of conserved domains.     

Heat cleavage of bacteriophage T4 gene 23 product produces two peptides previously identified as head proteins.

During studies on the intracellular protein pools of bacteriophage T4, we found that amber mutants in gene 23 blocked the synthesis of a 20-kilodalton (kDa) protein. Radiolabeled amino acid pulses showed that the protein appears at 8 min postinfection with kinetics similar to those of other major late species. Pulse-chase experiments demonstrated that the 20-kDa protein behaves like a primary product and also revealed a 29-kDa protein which, like other proteins cleaved during head assembly, appeared only after a long chase. Both species have been identified as constituents of the T4 head and have resisted previous efforts to identify their genetic origin. The dependence of the 20- and 29-kDa head proteins on the presence of gene 23 protein (gp23) and the observation that the sum of their masses equalled that of mature cleaved gp23 suggested that these two proteins were derived from this major capsid species. Evidence is presented demonstrating that heating samples before electrophoresis causes peptide bond cleavages in gp23, leading to the formation of the two peptides. As predicted by the results of Rittenhouse and Marcus (Anal. Biochem. 138:442-448, 1984), the cleavage occurs at Asp-336-Pro-337 and at two other Asp-Pro sites. Limited heat-induced proteolysis followed by two-dimensional gel analysis provided a peptide map of gp23 useful in the characterization of its assembly-related cleavages.     

Bacteriophage T4 bypass31 mutations that make gene 31 nonessential for bacteriophage T4 replication: mapping bypass31 mutations by UV rescue experiments.

The product of gene 31 is normally required for assembly of the T4 capsid. Two mutations that each bypass that requirement are shown to be located at separate sites in gene 23, which encodes the major structural protein of the capsid. A second phenotypic effect that characterizes both bypass31 mutant strains is the ability to multiply in host-defective strains, such as hdB3-1 and groEL mutants, on which wild-type T4 is unable to assemble capsids. The genetic data indicate that both phenotypic effects are due to the bypass31 mutation. Elimination of the requirement for both the phage protein, gp31, and the host protein, GroEL, by either of two single mutations in gene 23 indicates that GroEL and gp31 are normally needed to interact with gp23 in capsid assembly of wild-type T4.     

Specific labeling of protein domains with antibody fragments

Monovalent antibody Fab fragments, prepared from antisera raised against two different types of crystalline arrays made of either intact, or a proteolytic fragment of bacteriophage T4 major capsid protein, gp23*, were employed to stoichiometrically label different gp23* protein domains on the outer surface of a tubular variant (i.e., "polyheads") of bacteriophage T4 capsids. Computer filtrations of both negatively stained and freeze-dried/metal-shadowed specimens permitted approximate mapping of the Fab binding sites within the capsomere of the polyheads.     

Role of the major capsid protein of phage T4 in DNA packaging from structure-function and site-directed mutagenesis studies

Heat cleavage of asp-pro peptide bonds was used to probe the primary structures of the Phage T4 major capsid protein precursor, gp23, its mature capsid form gp23*, and a DNA-dependent ATPase, called capsizyme. This analysis suggests that capsizyme is a gp23** resulting from the N-terminal processing found in gp23* as well as shortening at the C-terminus. Photoaffinity labeling with Azido-ATP and BrU-DNA, followed by heat cleavage, suggests binding sites for these compounds toward the C-terminus of gp23**, suggesting localization of functions within the gp23 primary sequence. Site-directed mutagenesis experiments were targeted therefore to the C-terminal end of g23 as well as to its processing sites. N-terminal processing site modification supports the consensus gp21 proteinase cleavage rule, whereas mutagenesis at the C-terminus suggests that the C-terminal alteration is unlikely to result from a gp21-morphogenesis proteinase cleavage. Amino acid replacements in gp23 at newly introduced amber sites reveal a new g23 mutant phenotype, defective partially DNA-filled heads, in support of the hypothesis that gp23 and its products function directly in the DNA packaging mechanism.     

Cryo-EM structure of a bacteriophage T4 gp24 bypass mutant: the evolution of pentameric vertex proteins in icosahedral viruses

Many large viral capsids require special pentameric proteins at their fivefold vertices. Nevertheless, deletion of the special vertex protein gene product 24 (gp24) in bacteriophage T4 can be compensated by mutations in the homologous major capsid protein gp23. The structure of such a mutant virus, determined by cryo-electron microscopy to 26 angstroms, shows that the gp24 pentamers are replaced by mutant major capsid protein (gp23) pentamers at the vertices, thus re-creating a viral capsid prior to the evolution of specialized major capsid proteins and vertex proteins. The mutant gp23* pentamer is structurally similar to the wild-type gp24* pentamer but the insertion domain is slightly more distant from the gp23* pentamer center. There are additional SOC molecules around the gp23* pentamers in the mutant virus that were not present around the gp24* pentamers in the wild-type virus.     

Structure of T4 polyheads: II. A pathway of polyhead transformations as a model for T4 capsid maturation

We have studied the aberrant tubular polyheads of bacteriophages T4D and T2L as a model system for capsid maturation. Six different types of polyhead surface lattice morphology, and the corresponding protein compositions are reported and discussed. Using in vitro systems to induce transformations between particular polyhead types, we have deduced that the structural classes represent successive points in a transitional pathway. In the first step, coarse polyheads (analogous to the prohead τ-particle) are proteolytically cleaved by a phagecoded protease, a fragment of the gene 21 product. This cleavage of P23 to P23¹ induces a co-operative lattice transformation in the protein of the surface shell, to a conformation equivalent to that of T2L giant phage capsids. These polyheads (derived either from T4 or T2L lysates) can accept further T4-coded proteins. In doing so, they pass through intermediate structural states, eventually reaching an end point whose unit cell morphology is indistinguishable from that of the giant T4 capsids. At least one protein (called soc (Ishii & Yanagida, 1975)) is bound stoichiometrically to P23¹ in the end-state conformation. The simulation of several aspects of capsid maturation (cleavage of P23 to P23¹, stabilization, and lattice expansion) in the polyhead pathway suggest that it parallels the major events of phage T-even capsid maturation, decoupled from any involvement of DNA packaging.     

Conformational changes of a viral capsid protein. Thermodynamic rationale for proteolytic regulation of bacteriophage T4 capsid expansion, co-operativity, and super-stabilization by soc binding.

We have used differential scanning calorimetry in conjunction with cryo-electron microscopy to investigate the conformational transitions undergone by the maturing capsid of phage T4. Its precursor shell is composed primarily of gp23 (521 residues): cleavage of gp23 to gp23* (residues 66 to 521) facilitates a concerted conformational change in which the particle expands substantially, and is greatly stabilized. We have now characterized the intermediate states of capsid maturation; namely, the cleaved/unexpanded, state, which denatures at tm = 60 degrees C, and the uncleaved/expanded state, for which tm = 70 degrees C. When compared with the precursor uncleaved/unexpanded state (tm = 65 degrees C), and the mature cleaved/expanded state (tm = 83 degrees C, if complete cleavage precedes expansion), it follows that expansion of the cleaved precursor (delta tm approximately +23 degrees C) is the major stabilizing event in capsid maturation. These observations also suggest an advantage conferred by capsid protein cleavage (some other phage capsids expand without cleavage): if the gp23-delta domains (residues 1 to 65) are not removed by proteolysis, they impede formation of the stablest possible bonding arrangement when expansion occurs, most likely by becoming trapped at the interface between neighboring subunits or capsomers. Icosahedral capsids denature at essentially the same temperatures as tubular polymorphic variants (polyheads) for the same state of the surface lattice. However, the thermal transitions of capsids are considerably sharper, i.e. more co-operative, than those of polyheads, which we attribute to capsids being closed, not open-ended. In both cases, binding of the accessory protein soc around the threefold sites on the outer surface of the expanded surface lattice results in a substantial further stabilization (delta tm = +5 degrees C). The interfaces between capsomers appear to be relatively weak points that are reinforced by clamp-like binding of soc. These results imply that the "triplex" proteins of other viruses (their structural counterparts of soc) are likely also to be involved in capsid stabilization. Cryo-electron microscopy was used to make conclusive interpretations of endotherms in terms of denaturation events. These data also revealed that the cleaved/unexpanded capsid has an angular polyhedral morphology and has a pronounced relief on its outer surface. Moreover, it is 14% smaller in linear dimensions than the cleaved/expanded capsid, and its shell is commensurately thicker.     

Repetitive versus monomeric antigen presentation: direct visualization of antibody affinity and specificity

The concept of presenting antigens in a repetitive array to obtain high titers of specific antibodies is increasingly applied by using surface-engineered viruses or bacterial envelopes as novel vaccines. A case for this concept was made 25 years ago, when producing high-titer antisera against ordered arrays of gp23, the major capsid protein of bacteriophage T4 (Aebi et al., Proc. Natl. Acad. Sci. USA, 74 (1977) 5514-5518). In view of the current interest in this concept we thought it useful to employ this system to directly visualize the dependence of antibody affinity and specificity on antigen presentation. We compared antibodies raised against T4 polyheads, a tubular variant of the bacteriophage T4 capsid, which have gp23 hexamers arranged in a crystalline lattice (gp23(repetitive)), with those raised against the hexameric gp23 subunits (gp23(monomeric)). The labeling patterns of Fab-fragments prepared from these antibodies when bound to polyheads were determined by electron microscopy and image enhancement. Anti-gp23(repetitive) bound in a monospecific, stoichiometric fashion to the gp23 units constituting the polyhead surface. In contrast, anti-gp23(monomeric) decorated the polyhead surface randomly and with a 40-fold lower occupancy. These results concur with the difference in titers established by ELISA for the antisera against the repetitively displayed form of antigen (anti-gp23(repetitive)) and the randomly presented antigen (gp23(monomeric)), and they constitute a compelling visual documentation of the concept of repetitive antigen presentation to elicite a serotype-like immune response.     

Structure and assembly of the capsid of bacteriophage P22.

Identification of the genes and proteins involved in phage P22 formation has permitted a detailed analysis of particle assembly, revealing some unexpected aspects. The polymerization of the major coat protein (gene 5 product) into an organized capsid is directed by a scaffolding protein (gene 8 product) which is absent from mature phage. The resulting capsid structure (prohead) is the precursor for DNA encapsidation. All of the scaffolding protein exits from the prohead in association with DNA packaging. These molecules then recycle, directing further rounds of prohead assembly. The structure of the prohead has been studied by electron microscopy of thin sections of phage infected cells, and by low angle X-ray scattering of concentrated particles. The results show that the prohead is a double shell structure, or a ball within a shell. The inner ball or shell is composed of the scaffolding protein while the outer shell is composed of coat protein. The conversion from prohead to mature capsid is associated with an expansion of the coat protein shell. It is possible that the scaffolding protein molecules exit through the capsid lattice. When DNA encapsidation within infected cells is blocked by mutation, scaffolding protein is trapped in proheads and cannot recycle. Under these conditions, the rate of synthesis of gp8 increases, so that normal proheads continue to form. These results suggest that free scaffolding protein negatively regulates its own further synthesis, providing a coupling between protein synthesis and protein assembly.     

Phage display of intact domains at high copy number: a system based on SOC, the small outer capsid protein of bacteriophage T4.

Peptides fused to the coat proteins of filamentous phages have found widespread applications in antigen display, the construction of antibody libraries, and biopanning. However, such systems are limited in terms of the size and number of the peptides that may be incorporated without compromising the fusion proteins' capacity to self-assemble. We describe here a system in which the molecules to be displayed are bound to pre-assembled polymers. The polymers are T4 capsids and polyheads (tubular capsid variants) and the display molecules are derivatives of the dispensable capsid protein SOC. In one implementation, SOC and its fusion derivatives are expressed at high levels in Escherichia coli, purified in high yield, and then bound in vitro to separately isolated polyheads. In the other, a positive selection vector forces integration of the modified soc gene into a soc-deleted T4 genome, leading to in vivo binding of the display protein to progeny virions. The system is demonstrated as applied to C-terminal fusions to SOC of (1) a tetrapeptide; (2) the 43-residue V3 loop domain of gp120, the human immunodeficiency virus type-1 (HIV-1) envelope glycoprotein; and (3) poliovirus VP1 capsid protein (312 residues). SOC-V3 displaying phage were highly antigenic in mice and produced antibodies reactive with native gp120. That the fusion protein binds correctly to the surface lattice was attested in averaged electron micrographs of polyheads. The SOC display system is capable of presenting up to approximately 10(3) copies per capsid and > 10(4) copies per polyhead of V3-sized domains. Phage displaying SOC-VP1 were isolated from a 1:10(6) mixture by two cycles of a simple biopanning procedure, indicating that proteins of at least 35 kDa may be accommodated.     

Structure and inherent properties of the bacteriophage lambda head shell. VI. DNA-packaging-defective mutants in the major capsid protein

Some amino acid substitutions in the major capsid protein (gene E product) of lambda phage are found to cause a defect in DNA packaging. These substitutions permit initiation of DNA packaging and expansion of the prohead. However, cleavage of the concatemer DNA at the cos site takes place only to a very small extent, and the capsid eventually becomes empty. Interestingly, the mutations are suppressed by a decrease of the DNA length between the cos sites by 8000 to 10,000 bases. These properties are similar to those of amber mutants in gene D, which codes for the capsid outer-surface protein. Studies on the E missense.D amber double mutant show that the E protein and the D protein contribute additively to the stabilization of the condensed form of the DNA molecule in phage heads.     

The maturation-dependent conformational change of phage T4 capsid involves the translocation of specific epitopes between the inner and the outer capsid surfaces

After polymerization of the phage T4 prohead is complete, its capsid expands by approximately 16%, is greatly stabilized, and acquires the capacity to bind accessory proteins. These effects are manifestations of a large-scale, irreversible, conformational change undergone by the major capsid protein, gp23 (521 residues) which is cleaved to gp23* (residues 66-521) during this maturation process. In order to explore its structural basis, we have performed immunoelectron microscopy with antibodies raised against synthetic peptides that correspond to precisely defined segments of the amino acid sequence of gp23. These antibodies were used to label purified polyheads (tubular polymorphic variants of the normal icosahedral capsid), in experiments designed to impose constraints on the possible foldings of the gp23/gp23* polypeptide chains in their successive conformational states. Peptide 1 (residues 48-57), part of the gp23-delta domain that is excised when gp23 is converted to gp23*, resides on the inner surface of the precursor surface lattice, but--if not proteolyzed--is found on the outer surface of the mature surface lattice. Peptide 2 (residues 65-73), immediately distal to the cleavage site, is located on the inside of the precursor surface lattice, and remains there subsequent to expansion. Peptide 3 (residues 139-146) is translocated in the opposite direction from peptide 1, i.e., from the outer to the inner surface upon expansion; moreover, expansion greatly increases the polyheads' affinity for these antibodies. Peptide 5 (residues 301-308) is located on the inside in both the precursor and the mature states. Taking into account data from other sources, these observations imply that the conformational change that underlies capsid expansion involves a radical reorganization of the proteins' structure, in which at least three distinct epitopes, situated in widely differing parts of the polypeptide chain, are translocated from one side to the other. Moreover, the amino-terminal portion of gp23/gp23*, around the cleavage site, is particularly affected.     

Mutations that eliminate the requirement for the vertex protein in bacteriophage T4 capsid assembly.

The capsid of bacteriophage T4 is composed of two essential structural proteins, gp23, the major constituent of the capsid, and gp24, a less prevalent protein that is located in the pentameric vertices of the capsid. gp24 is required both to stabilize the capsid and to allow it to be further matured. This requirement can be eliminated by bypass-24 (byp24) mutations within g23. We have isolated, cloned and sequenced several new byp24 mutations. These mutations are cold-sensitive in the absence of gp24, and are located in regions of g23 not known to contain any other mutations affecting capsid assembly. The cold-sensitivity of the byp24 mutations can be reduced by further mutations within g23 (trb mutations). Cloning and sequencing of these trb mutations has revealed that they lie in regions of g23 that contain clusters of mutations that cause the production of high levels of petite and giant phage (ptg mutations). Despite the proximity of the trb mutations to the ptg mutations, none of the ptg mutations has a Trb phenotype. The mutation ptE920g, which is also located near one of the ptg clusters, and which produces only petite and wild-type phage, has been shown to confer a Trb but not a Byp24 phenotype. The relevance of these observations to our understanding of capsid assembly is discussed.     

Bacteriophage T4 self-assembly: in vitro reconstitution of recombinant gp2 into infectious phage

T4 gene 2 mutants have a pleiotropic phenotype: degradation of injected phage DNA by exonuclease V (ExoV) in the recBCD(+) host cell cytoplasm and a low burst size due, at least in part, to a decreased ability for head-to-tail (H-T) joining. The more N terminal the mutation, the more pronounced is the H-T joining defect. We have overexpressed and purified the recombinant gene 2 product (rgp2) to homogeneity in order to test its role in H-T joining, during in vitro reconstitution. When we mix extracts of heads from a gp2(+) phage infection (H(+)) with tails from a gp2(+) or gp2(-) phage infection (T(+) or T(-)), the H-T joining is fast and all of the reconstituted phage grow equally well on cells with or without ExoV activity. When heads from gene 2 amber mutants (H(-)) are used, addition of rgp2 is required for H-T joining. In this case, H-T joining is slow and only about 10% of the reconstituted phage can form plaques on ExoV(+) cells. When extracts of heads with different gene 2 amber mutations are mixed with extracts of tails (with a gene 2 amber mutation) in the presence of rgp2, we find that the size of the gp2 amber peptide of the head extract is inversely related to the fraction of reconstituted phage with a 2(+) phenotype. We conclude that free rgp2 is biologically active and has a direct role in H-T joining but that the process is different from H-T joining promoted by natural gp2 that is incorporated into the head in vivo. Furthermore, it seems that gp2 has a domain which binds it to the head. Thus, the presence of the longer gp2am mutants (with this domain) inhibits their replacement by full-length rgp2.