大肠杆菌细胞的软X射线显微成像研究

软X射线显微术是研究含水甚至活性生物样品的有力工具。相对于光学显微镜 ,它具有更高的成象分辨率 ;相对于电子显微镜 ,它的样品制备简单—无须对样品进行脱水、染色和超薄切片等。报道的是利用合肥同步辐射X射线源和接触显微成象技术 ,对自然状态下含水的完整XL1 blueMRF′细菌细胞进行显微成象研究。从获得的显微图象中可以看出一些新的现象。含有DNA、蛋白质的拟核以及中体对波长 2 .4nmX射线具有较弱的吸收能力 ;不少细菌细胞的两端对 2 .4nm波长的X射线的吸收也具有很大的差异。这些有趣现象产生的根本原因和生物学意义有待进一步研究。     

反符合屏蔽低本底NaI(Tl)γ谱仪

本文报告了一台全NaI(T1)晶体的反符合屏蔽低本底γ谱仪。采用交替物质屏蔽,选用含放射性杂质少的结构、屏蔽材料,采用反符合、符合技术等措施降低谱仪的本底。主探测器在井形探测器反符合屏蔽条件下,在0.05—2.0兆电子伏能量范围内,谱仪的积分本底为35计数/分。对~(137)Csγ射线的康普顿减少因子为3.5。当样品和本底测量时间分别为1,000分钟,置信水平为95％时,对单一的~(137)Cs点源的探测灵敏度为7×10~(-13)居里。本谱仪较大地提高了低水平γ放射性测量工作的质量;可用于外环境生物样品和人体尿、粪、血液样品的分析,亦可用于其它弱γ放射性样品的测量。     

Elemental composition of secretory granules in pancreatic islets of Langerhans.

We have characterized, by electron probe microanalysis, rapidly frozen cultured rat islets at the level of individual secretory granules. Elemental analysis of thin, dried cryosections showed that beta granules could be distinguished by high Zn, Ca, and S, whereas non-beta (mainly alpha) granules contained elevated P and Mg. Although a single granule type predominated in a particular cell, some rebel granules were found in A cells that had the compositional fingerprint of B cell granules. Zn, which was found in millimolar concentrations in B cell granules, was considered a marker for the insulin storage complex. The data indicate that non-B islet cells in the adult pancreas may produce insulin-containing organelles and that, when glucagon and insulin are coexpressed, these hormones are packaged in separate granules.     

Quantitative Scanning Transmission Electron Microscopy of Ultrathin Cryosections: Subcellular Organelles in Rapidly Frozen Liver and Cerebellar Cortex

Freeze-dried, ultrathin cryosections of directly frozen mouse liver and brain have been prepared and characterized by low-dose dark-field scanning transmission electron microscopy (STEM). These improved cryosections gave images comparable to those from conventional plastic sections. They were thin enough (1.0 elastic mean free path) to use established dark-field techniques, modified for thickness-dependent nonlinearities, to measure the dry mass fraction of individual organelles, and hence to deduce their water content. Digital STEM imaging in combination with electron and X-ray spectroscopy has important biological applications, as illustrated by studies on calcium regulation in Purkinje neurons. Calcium concentrations per unit dry weight of dendritic compartments were determined by the peak/continuum method of energy-dispersive X-ray spectroscopy (EDXS), which necessarily overstates elemental concentrations because of beam-induced mass loss. The dry mass content of organelles at low dose and the percentage of dry mass retained after analysis at high dose were as follows: mitochondria (46.0 g dry mass/100 g hydrated mass, 67% mass retained); endoplasmic reticulum (27.9 g/100 g, 57%); and cytoplasm (16.3 g/100 g, 41%). These values were used to correct elemental concentrations for mass loss. Results indicated that the major calcium storage organelle in Purkinje cell dendrites is the endoplasmic reticulum, of which there are two types distinguished by their levels of calcium. Parallel electron energy loss spectroscopy of dendritic organelles corroborated EDXS measurements, with an improved sensitivity that indicates the feasibility of quantitative calcium mapping.     

Measurement of Total Calcium in Neurons by Electron Probe X-ray Microanalysis

In this article the tools, techniques, and instruments appropriate for quantitative measurements of intracellular elemental content using the technique known as electron probe microanalysis (EPMA) are described. Intramitochondrial calcium is a particular focus because of the critical role that mitochondrial calcium overload plays in neurodegenerative diseases. The method is based on the analysis of X-rays generated in an electron microscope (EM) by interaction of an electron beam with the specimen. In order to maintain the native distribution of diffusible elements in electron microscopy specimens, EPMA requires "cryofixation" of tissue followed by the preparation of ultrathin cryosections. Rapid freezing of cultured cells or organotypic slice cultures is carried out by plunge freezing in liquid ethane or by slam freezing against a cold metal block, respectively. Cryosections nominally 80 nm thick are cut dry with a diamond knife at ca. -160 °C, mounted on carbon/pioloform-coated copper grids, and cryotransferred into a cryo-EM using a specialized cryospecimen holder. After visual survey and location mapping at ≤-160 °C and low electron dose, frozen-hydrated cryosections are freeze-dried at -100 °C for ~30 min. Organelle-level images of dried cryosections are recorded, also at low dose, by means of a slow-scan CCD camera and subcellular regions of interest selected for analysis. X-rays emitted from ROIs by a stationary, focused, high-intensity electron probe are collected by an energy-dispersive X-ray (EDX) spectrometer, processed by associated electronics, and presented as an X-ray spectrum, that is, a plot of X-ray intensity vs. energy. Additional software facilitates: 1) identification of elemental components by their "characteristic" peak energies and fingerprint; and 2) quantitative analysis by extraction of peak areas/background. This paper concludes with two examples that illustrate typical EPMA applications, one in which mitochondrial calcium analysis provided critical insight into mechanisms of excitotoxic injury and another that revealed the basis of ischemia resistance.     

The X-ray microanalysis of frozen-hydrated sections in scanning electron microscopy: An evaluation

The present status of the technique to measure concentrations of electrolyte elements and dry mass in 1 μm thick frozen-hydrated sections of soft biological tissues with electron probe X-ray microanalysis in a scanning electron microscope is critically reviewed. The technique is to quench-freeze fresh specimens to < − 180°C, cut 1 μm thick hydrated cryosections −70°C), transfer on to a cold stage (< −170°C) of a suitable microanalytical arrangement, obtain scanning transmission images to identify the cell and tissue compartments, locate an electron probe (several μm² to 100 nm) on the areas of interest and collect X-ray quanta. The X-ray quanta are collected with suitable spectrometers (WDS and EDS) and processed with a computer using a comprehensive programme based on continuum normalization procedures (‘Hall’ programme). The cryosections are analysed first in a hydrated state and second after dehydration within the microanalyser column to obtain directly elemental concentrations in mM kg⁻¹ wet wt and mM kg⁻¹ dry wt of the compartments identified under the beam. The local water-fractions are estimated and the elemental concentrations converted into mM 1⁻¹ water. In the past 7 years the technique has been applied to obtain fully quantitative information on Na, K, Cl, P, S, Ca and H₂O in more than ten types of tissue.     

Active MnOx Electrocatalysts Prepared by Atomic Layer Deposition for Oxygen Evolution and Oxygen Reduction Reactions

The ability to deposit conformal catalytic thin films enables opportunities to achieve complex nanostructured designs for catalysis. Atomic layer deposition (ALD) is capable of creating conformal thin films over complex substrates. Here, ALD‐MnO_x on glassy carbon is investigated as a catalyst for the oxygen evolution reaction (OER) and the oxygen reduction reaction (ORR), two reactions that are of growing interest due to their many applications in alternative energy technologies. The films are characterized by X‐ray photoelectron spectroscopy, X‐ray diffraction, scanning electron microscopy, ellipsometry, and cyclic voltammetry. The as‐deposited films consist of Mn(II)O, which is shown to be a poor catalyst for the ORR, but highly active for the OER. By controllably annealing the samples, Mn₂O₃ catalysts with good activity for both the ORR and OER are synthesized. Hypotheses are presented to explain the large difference in the activity between the MnO and Mn₂O₃ catalysts for the ORR, but similar activity for the OER, including the effects of surface oxidation under experimental conditions. These catalysts synthesized though ALD compare favorably to the best MnO_x catalysts in the literature, demonstrating a viable way to produce highly active, conformal thin films from earth‐abundant materials for the ORR and the OER.     

Body condition during pregnancy and lactation and reproductive efficiency of mares

In Experiment I, 32 mares were equally allotted to the following treatments: mares fed to A) high body condition from 90 days prepartum to foaling and maintained in high body condition to 90 days postpartum, B) high body condition from 90 days prepartum to foaling and allowed to lose body condition to 90 days postpartum, C) lose body condition from 90 days prepartum to foaling and maintained in low body condition to 90 days postpartum, and D) lose body condition from 90 days prepartum to foaling and allowed to gain weight after foaling to attain a high level of body condition by 90 days postpartum. After three cycles, pregnancy rate at 30 days postovulation was lower (P<0.05) in C mares (50%) than in those in the other three groups (100%). Maintenance of pregnancy to 90 days was also reduced (P<0.05) in C mares (25%) when compared with A, D (both 100%) and B mares (88%). Foal growth to 90 days of age was similar in all treatments. In Experiment II, 927 mares were evaluated for body condition and monitored for reproductive performance. Pregnancy rate was lower (P<0.05) and number of cycles/conception was higher (P<0.05) for barren and maiden mares entering the breeding season in thin condition and for pregnant mares foaling in thin condition (condition score less than 5.0) when compared with mares with a higher level of condition. Also, onset of estrus and ovulation appeared to be delayed in barren and maiden mares entering the breeding season in thin condition. Breeding efficiency was enhanced in mares entering the breeding season or foaling at a condition of 5.0 or above. Initial excess stores of body fat enhanced fertility. There were no detrimental effects of excess body fat stored in late gestation.     

Atmospheric‐Pressure Chemical Vapor Deposition of Iron Pyrite Thin Films

Iron pyrite (cubic FeS₂) is a promising candidate absorber material for earth‐abundant thin‐film solar cells. In this report, single‐phase, large‐grain, and uniform polycrystalline pyrite thin films are fabricated on glass and molybdenum‐coated glass substrates by atmospheric‐pressure chemical vapor deposition (AP‐CVD) using the reaction of iron(III) acetylacetonate and tert‐butyl disulfide in argon at 300 °C, followed by sulfur annealing at 500–550 °C to convert marcasite impurities to pyrite. The pyrite‐marcasite phase composition depends strongly on the concentration of sodium in the growth substrate and the sulfur partial pressure during annealing. Phase and elemental composition of the films are characterized by X‐ray diffraction, Raman spectroscopy, Auger electron spectroscopy, secondary ion mass spectrometry, Rutherford backscattering spectrometry, and X‐ray photoelectron spectroscopy. The in‐plane electrical properties are surprisingly insensitive to phase and elemental impurities, with all films showing p‐type, thermally activated transport with a small activation energy (≈30 meV), a room‐ temperature resistivity of ≈1 Ω cm, and low mobility. These ubiquitous electrical properties may result from robust surface effects. These CVD pyrite thin films are well suited to fundamental electrical studies and the fabrication of pyrite photovoltaic device stacks.     

Distribution of calcium and other elements in cryosectioned Bacillus cereus T spores, determined by high-resolution scanning electron probe x-ray microanalysis.

The distribution of a number of key elements in Bacillus cereus T spores was determined by high-resolution scanning electron probe X-ray microanalysis. To circumvent the redistribution of soluble or weakly bound elements, freeze-dried cryosections of spores, which had been rapidly frozen in 50% aqueous polyvinyl pyrrolidone, were employed. The sections were examined by using a modified Philips EM400 electron microscope fitted with a field emission gun, scanning transmission electron microscopy attachment, and a computer-linked energy-dispersive X-ray microanalysis system. X-ray maps for selected elements and the corresponding electron image were produced simultaneously by scanning the cryosections with a fine electron beam in a raster pattern, using the scanning transmission electron microscopy attachment. The results indicated that almost all of the calcium, magnesium, and manganese, together with most of the phosphorus, was located in the core region. An unexpectedly high concentration of silicon was found in the cortex/coat layer. Granules containing high concentrations of calcium, manganese, and phosphorus were demonstrated in spores containing reduced levels of dipicolinic acid. Spot mode analyses, in which a stationary beam was located over the region of interest in the spore cryosection, confirmed the results obtained with the scanning mode and also provided a more accurate quantitation of the elemental concentrations on a dry weight bases.     

Manipulating Backbone Structure to Enhance Low Band Gap Polymer Photovoltaic Performance

A pair of polymers, PBDTBT and PBDTDTBT , was synthesized for application in polymer solar cells (PSCs). Although these two polymers have similar absorption bands and molecular energy levels, PBDTDTBT exhibits much better photovoltaic performance in polymer solar cell (PSC) devices with power conversion efficiency (PCE) of 7.4%. To understand the differences between PBDTDTBT and PBDTBT , we have investigated the correlations of the molecular structure, morphology, dynamics and efficiency of these two polymers. A theoretical investigation using density functional theory (DFT) and time‐dependent DFT (TDDFT) has been employed to investigate the electron density and electron delocalization extent of the unimers. TEM data showed that PBDTDTBT phase separates from PC₇₁BM, while PBDTBT suffers from having a proper morphology on different processing conditions. Grazing incidence wide angle X‐ray diffraction (GIWAXD) was used to probe the crystal structure of the polymers in thin film. A polymorph crystal structure was observed for PBDTBT . Grazing incidence small angle X‐ray scattering (GISAXS) was used to probe the size scale of phase separation, with an optimized 25 nm feature size observed for PBDTDTBT /PC₇₁BM blends, which agrees well with TEM results. Femtosecond transient absorption (TA) spectroscopy was used to probe the dynamics of the fundamental processes in organic photovoltaic (OPV) materials, such as charge separation and recombination. The enhanced absorption coefficient, good charge separation, optimal phase separation and higher charge mobility all contribute to the high PCE of the PBDTDTBT /PC₇₁BM devices.     

Liquid Crystallinity as a Self‐Assembly Motif for High‐Efficiency,Solution‐Processed,Solid‐State Singlet Fission Materials

Solution and solution‐deposited thin films of the discotic liquid crystalline electron acceptor–donor–acceptor (A‐D‐A) p‐type organic semiconductor FHBC(TDPP)₂, synthesized by coupling thienyl substituted diketopyrrolopyrrole (TDPP) onto a fluorenyl substituted hexa‐peri‐hexabenzocoronene (FHBC) core, are examined by ultrafast and nanosecond transient absorption spectroscopy, and time‐resolved photoluminescence studies to examine their ability to support singlet fission (SF). Grazing incidence wide‐angle X‐ray (GIWAX) studies indicate that as‐cast thin films of FHBC(TDPP)₂ are “amorphous,” while hexagonal packed discotic liquid crystalline films evolve during thermal annealing. SF in as‐cast thin films is observed with an ≈150% triplet generation yield. Thermally annealing the thin films improves SF yields up to 170%. The as‐cast thin films show no long‐range order, indicating a new class of SF material where the requirement for local order and strong near neighbor coupling has been removed. Generation of long‐lived triplets (µs) suggests that these materials may also be suitable for inclusion in organic solar cells to enhance performance.