乳酸乳球菌Nisin抗性基因nisI的克隆及作为筛选标记的研究

摘要：【目的】为了优化LJ1菌株的培养条件使之产生高活性的胞外褐藻胶裂解酶。【方法】通过富集培养技术从海带筛选到一株褐藻胶裂解酶产生菌LJ1, 依据表型特征、脂肪酸组成分析及16S rRNA基因序列分析对该菌株进行鉴定。通过单因子和正交试验对LJ1 菌株产胞外褐藻胶裂解酶的培养条件进行了优化。【结果】LJ1菌株属于假交替单胞菌属（Pseudoalteromonas）。该菌株产酶的最佳培养基组成为：褐藻胶3 g/L、(NH4)2SO4 3 g/L、NaCl 20 g/L、KH2PO4 0.1 g/L、CaCl2 0.1 g/L;最佳培养条件为：250 mL三角烧瓶中装液量25 mL、接种量3%、摇瓶转速150 r/min、pH7.5、培养温度为28℃、培养时间为24 h。LJ1菌株所产褐藻胶裂解酶的最适温度为40℃,最适pH7.6,最适NaCl浓度为0.3 mol/L。1 mol/L金属离子Mg2+对酶活力有明显的促进作用,而Co2+ 和Zn2+对酶活力有较强的抑制作用。【结论】LJ1菌株是Pseudoalteromonas 新的胞外褐藻胶裂解酶产生菌,在最佳培养条件下,该菌株的酶活力提高了66%。     

褐藻胶降解菌株S10鉴定及产酶条件优化

探讨了褐藻胶降解菌株S10的生长条件及其对产褐藻胶降解酶活力的影响。以分离自海参肠道的褐藻胶降解菌株S10为研究对象，采用形态学观察结合16S rDNA序列分析，对菌株S10进行菌种鉴定并对其生理生化特性进行测定。以降解酶活力为指标，利用单因素、Plackett-Burman(PB)和响应面法对培养基成分和培养条件进行优化；最后对优化前后的菌株生长量、产酶活力和粗酶液稳定性进行分析。结果表明，菌株S10属于溶藻孤菌(Vibrio algindyticus);当pH 7、接种量2%(体积分数)、装液量150 mL、温度26℃、转速150 r/min、NaCl 3%(质量分数，下同)、海藻酸钠含量1.12%、硫酸铵含量0.44%、培养时间35.95 h条件下，褐藻胶降解酶活力最大(188.18 U/min)。优化后产酶活力提高30%;4℃低温更有利于该酶保存。综上，优化后的菌株S10产褐藻胶降解酶活力较高，能更好地用于降解褐藻胶，可为提高褐藻胶的利用率和进一步发掘褐藻胶寡糖的利用价值提供参考。     

1株褐藻胶降解菌的筛选、鉴定及产酶条件优化

为获得可产生褐藻胶裂解酶并高效降解褐藻胶的菌株,以海藻酸钠为唯一碳源配制培养基,以透明圈法进行初筛,DNS法复筛,从海洋生物中筛选得到1株高酶活力褐藻胶降解菌株B12,经16S rDNA序列分析、生理生化试验、电镜观察,确定该菌为弧菌属(Vibrio sp.)。通过单因素试验及响应面优化试验对影响菌株生长和产酶条件的5个因素(发酵初始pH值、发酵温度、NaCl质量浓度、接种量和装液量)进行优化。得到该菌株最佳产酶条件:pH 6.52,发酵温度28.2℃,NaCl质量浓度20.1 g/L,接种量2.1%,装液量59.5 mL。在最佳发酵条件下,B12菌株酶活力可达91.68 U/mL,相比于优化前提高了38.5%。菌株开始产酶时间提前6 h, 4℃冷藏酶活力稳定性较好。     

响应面法优化类芽胞杆菌HB172198产褐藻胶裂解酶发酵培养基

为了提高类芽胞杆菌新种HB172198产褐藻胶裂解酶活力,本研究采用响应面法对该菌株液体发酵培养基进行了优化实验。在单因素实验和Plackett-Burman试验筛选出海藻酸钠、胰蛋白胨、NaCl、MgSO4·7H2O等4个显著影响产酶因素的基础上,通过Box-Behnken设计及响应面法进行回归分析,得出产褐藻胶裂解酶最佳发酵培养基,其成分为:海藻酸钠7.50 g/L、胰蛋白胨13.57 g/L、NaCl 29.75 g/L、MgSO4·7H2O 0.08 g/L。优化条件下该菌株最大酶活性达14.60 U/mL,是优化前的1.87倍。本研究为菌株HB172198产褐藻胶裂解酶的大规模生产和工业应用提供了重要的理论依据。     

产褐藻胶裂解酶交替单胞菌的发酵优化及alg2951的外源表达

褐藻胶裂解酶是制备生物活性寡糖的重要功能酶,在食品、农业、工业等行业中具有重要应用价值。本研究以交替单胞菌属新种HB161718为出发菌株,在单因素实验基础上,通过Box-Behnken设计及响应面法优化获得该菌的最佳产酶培养基:海藻酸钠7.23 g/L,蛋白胨7 g/L,NaCl 23.11 g/L,K_2HPO_40.1 g/L,MgSO_40.1 g/L,优化条件下酶活力为(54.28±3.47) U/mL,达到优化前的1.59倍。为进一步提高酶活性,通过分子生物学方法实现了褐藻胶裂解酶alg2951在大肠杆菌中的外源表达,纯化后的酶活性为636 U/mL,达到原始菌株酶活的18.6倍。本研究为褐藻胶裂解酶的工业生产提供了新的来源。     

褐藻胶裂解酶产生菌的分离鉴定及产酶发酵优化

对一株从腐烂海带中筛选得到的产褐藻胶裂解酶的菌株进行鉴定,并对其产酶条件进行发酵优化。经形态学、生理生化特征和分子生物学鉴定,将其鉴定为盐单胞菌属,并命名为Halomonas sp. WF6。通过在摇瓶培养水平上进行单因素和多因素正交试验,确定褐藻胶裂解酶产生菌WF6的最适产酶培养基为：褐藻酸钠6.0 g/L,蛋白胨5.0 g/L,酵母粉2.5 g/L,NaCl 30 g/L,K⁺ 5 mmol/L。进而采用最适培养基进行产酶条件的优化,优化后的发酵产酶条件为：初始pH 8.0,培养温度25℃,接种量为2%,摇瓶装液量30 ml/250 ml,培养时间39 h。优化后的褐藻胶裂解酶酶活达117.66 U/ml,是优化前的2.1倍。该酶对褐藻酸钠的酶解产物主要由聚合度为二和三的褐藻寡糖组成。     

假交替单胞菌LJ1菌株产褐藻胶裂解酶的培养条件优化及酶学性质

[目的]为了优化Lj1菌株的培养条件使之产生高活性的胞外褐藻胶裂解酶.[方法]通过富集培养技术从海带筛选到一株褐藻胶裂解酶产生菌Lj1,依据表型特征、脂肪酸组成分析及16S rRNA基因序列分析对该菌株进行鉴定.通过单因子和正交试验对Lj1菌株产胞外褐藻胶裂解酶的培养条件进行了优化.[结果]Lj1菌株属于假交替单胞菌属(Pseudoalteromonas).该菌株产酶的最佳培养基组成为:褐藻胶3g/L、(NH4)2SO43 g/L、NaCl 20 g/L、KH2PO4 0.1 g/L、CaCl2 0.1 g/L;最佳培养条件为:250 mL三角烧瓶中装液量25 mL、接种量3%、摇瓶转速150 r/min、pH7.5、培养温度为28℃、培养时间为24 h.LJl菌株所产褐藻胶裂解酶的最适温度为40℃,最适pH7.6,最适NaCl浓度为0.3 mol/L.1 mol/1.金属离子Mg2+对酶活力有明显的促进作用,而C02+和Zn2+对酶活力有较强的抑制作用.[结论]LJ1菌株是Pseudoalteromonas新的胞外褐藻胶裂解酶产生菌,在最佳培养条件下,该菌株的酶活力提高了66%.     

海藻酸裂解酶高产菌株Microbulbifer sp.SH-1的分离、鉴定及其产酶条件优化

【目的】筛选一株海藻酸裂解酶高产菌株,并通过优化产酶条件提高海藻酸裂解酶活性。【方法】以海藻酸钠为唯一碳源的培养基,对福建漳州滨海土壤中的微生物进行筛选和分离,获得海藻酸裂解酶高产菌株;依据形态、生理生化特征及16S rDNA序列分析对目的菌株进行鉴定;然后通过单因素和正交试验对其产酶条件进行优化。【结果】十六烷基吡啶(CPC)染色得到4株透明圈与菌落直径比值(D/d)3的菌株;DNS法测定4菌株发酵液中海藻酸裂解酶活力,其中菌株SH-1的海藻酸裂解酶活性最高,达到315.52 U/mL;经形态、生理生化和16S rDNA测序鉴定,将其命名为Microbulbifer sp. SH-1;通过单因素和正交试验优化,确定该菌株最适产酶培养基为:海藻酸钠10 g/L,NaCl 5 g/L,(NH_4)_2SO_45g/L,MgSO_40.2g/L,K_2HPO_41g/L,FeSO_40.02g/L。对培养条件的进一步优化结果发现,在初始pH 7.5、温度32°C条件下,以1%的接种量将SH-1菌株接入50 mL优化培养基中,240 r/min转速下振荡培养24 h,SH-1菌株产酶最大活性可达757.90 U/mL,比优化前提高了2.4倍。【结论】SH-1最佳产酶条件的建立,为海藻酸裂解酶的大规模制备以及更深层次研究提供了试验基础和理论依据。     

一株产褐藻胶裂解酶的需钠弧菌筛选及酶解产物分析

[背景]褐藻胶裂解酶种类丰富、降解机制多样,是高效环保降解褐藻胶、制备褐藻寡糖的工具酶,成为褐藻植物高值化开发利用的研究热点.[目的]从海泥中筛选获得褐藻胶裂解酶高效产酶菌株,确定菌株发酵产酶最优条件,鉴定和分析酶降解产物,进而解析该酶的降解特性.[方法]以褐藻胶为唯一碳源,从海带养殖场附近海泥中筛选菌株,通过形态学观...     

微生物发酵-膜分离法制备褐藻胶寡糖及其产物分析

比较褐藻胶裂解酶产生菌Alteromonassp .在摇瓶和发酵罐培养过程中生物量、褐藻胶寡糖含量以及褐藻胶裂解酶活性的变化 ,根据其变化确立了通过微生物发酵 膜分离技术结合制备褐藻胶寡糖的条件 ,并对寡糖进行凝胶过滤色谱和薄层色谱分析。用组成为每升含酵母粉 5g、蛋白胨 10g、FeSO4 0 1g、褐藻酸钠 12g、NaCl 1 5g ,pH为7 5的培养基 ,在 2 8℃培养褐藻胶裂解酶产生菌 ,结果表明 ,发酵罐培养 30h ,发酵液寡糖含量达到最大。发酵液通过超滤 纳滤两级膜分离 ,得到褐藻胶寡糖 ,寡糖的回收率和脱盐率分别为 94 0 %和 93 3%。通过凝胶柱分离和TLC分析 ,得到 5个褐藻胶寡糖组分。     

Components in the inoculum determine the kinetics of Azotobacter vinelandii cultures and the molecular weight of its alginate

In cultures of Azotobacter vinelandii inoculated using washed cells (avoiding exhausted broth components) alginates of a higher molecular weight (1200 kDa) than those obtained in cultures conventionally inoculated (350 kDa), were produced. Also, when comparing conventionally inoculated cultures with those inoculated with washed-cells, the alginate lyase activity was delayed and the final polymer concentration decreased from 4.8 to 3.5 g l^–1. This suggests that components in the exhausted inoculum broth play important regulatory roles in alginate biosynthesis and needs to be taken into account when describing polymer biosynthesis.     

A Novel Alginate Lyase with High Activity on Acetylated Alginate of Pseudomonas aeruginosa FRD1 from Pseudomonas sp. QD03

Summary To exploit alginate lyase which could degrade bacterial alginates, degenerate PCR and long range-inverse PCR (LR-IPCR) were used to isolate alginate lyase genes from soil bacteria. Gene algL, an alginate lyase-encoding gene from Pseudomonas sp. QD03 was cloned, and it was composed of a 1122 bp open reading frame (ORF) encoding 373 amino acid residues with the calculated molecular mass of 42.2 kDa. The deduced protein had a potential N-terminal signal peptide of 20 amino acid residues that was consistent with its proposed periplasmic location. Gene algL was expressed in pET24a (+)/E. coli BL21 (DE3) system. The recombinant AlgL was purified to electrophoretic homogeneity using affinity chromatography. The molecular weight of AlgL was estimated to be 42.8 kDa by SDS-PAGE. AlgL exhibited maximal activity at pH 7.5 and 37 °C. Na⁺, K⁺, Ca²⁺ and Ba²⁺ significantly enhanced the activity of AlgL. AlgL could degrade alginate and mannuronate blocks, but hardly degrade guluronate blocks. In particular, AlgL could degrade acetylated alginate of Pseudomonas aeruginosa FRD1 (approximately 0.54 mol of O-acetyl group per mol of alginate). It might be possible to use alginate lyase AlgL as an adjuvant therapeutic medicine for the treatment of disease associated with P. aeruginosa infection.     

Bacterial alginates: from biosynthesis to applications

Alginate is a polysaccharide belonging to the family of linear (unbranched), non-repeating copolymers, consisting of variable amounts of β-d-mannuronic acid and its C5-epimer α- l-guluronic acid linked via β-1,4-glycosidic bonds. Like DNA, alginate is a negatively charged polymer, imparting material properties ranging from viscous solutions to gel-like structures in the presence of divalent cations. Bacterial alginates are synthesized by only two bacterial genera, Pseudomonas and Azotobacter, and have been extensively studied over the last 40 years. While primarily synthesized in form of polymannuronic acid, alginate undergoes chemical modifications comprising acetylation and epimerization, which occurs during periplasmic transfer and before final export through the outer membrane. Alginate with its unique material properties and characteristics has been increasingly considered as biomaterial for medical applications. The genetic modification of alginate producing microorganisms could enable biotechnological production of new alginates with unique, tailor-made properties, suitable for medical and industrial applications.     

Variations in the alginate content and composition of Durvillaea antarctica and D. willana from southern New Zealand

The brown seaweeds Durvillaea antarctica andD. willana are dominant components of the lowerlittoral and upper sublittoral of exposed rocky shoresin southern New Zealand. Tissue samples of bothspecies, harvested from a site on the south-east coastof South Island over a period of 2 years, wereanalysed for alginate content and composition.Individuals of both species were further separatedinto different blade (lamina and palm) and stipe(cortex and medulla) fractions to assess variationwithin the thallus. On average the alginate contentand frequency of mannuronic acid (F_m) was higherin D. antarctica than in D. willana. Blades contained more alginate than stipes, laminaeand stipes were rich in mannuronic acid whereasholdfasts were rich in guluronic acid. Variations incomposition are considered to reflect the functionaldifferences of the tissue, giving flexibility to bladeand stipe and rigidity to the holdfast. Despitefluctuations in content and composition betweencollection times no seasonal trends in eithercomponent were apparent.     

Plant regeneration from leaf protoplasts of apple

Protoplasts were isolated from young leaves or etiolated shoot apices. For initiation of divisions the protoplasts were embedded in sodium alginate and cultivated in MS or MI medium supplemented with 2.2 M BA, 2.6 M NAA and 2.2 M 2,4-dichlorophenoxyacetic acid. The protoplasts of all seven lines tested developed to protocalluses at high frequencies. No genotypic differences were observed. When BA was used in combination with NAA in the regeneration experiments, only a few protocalluses (highest frequency 3%) exhibited shoot organogenesis. When BA was replaced with thidiazuron, the percentage of protocalluses that developed shoots increased in two of three tested lines to 7% and 56%, respectively. Shoot development was achieved under light conditions. The shoots were then rooted and transferred into soil.Abbreviations ABA abscisic acid - BA 6-benzyladenine - 2,4-d 2,4-dichlorophenoxyacetic acid - FW fresh weight - GA₃ gibberellic acid - IBA indole-3-butyric acid - MES 2-N-morpholinoethane sulphonic acid - NAA -naphthaleneacetic acid     

褐藻寡糖的制备方法及生物活性研究进展

褐藻胶是一类多糖聚合物,由于其独特的理化性质和有益健康的作用,已被广泛应用于制药和食品工业.然而,由于褐藻胶的水溶性低、黏度大,进而限制了褐藻胶的开发和应用.褐藻寡糖(alginate oligosaccharide,AOS)是褐藻胶的降解产物,由于其分子量低、水溶性高、安全无毒等特点,近年来受到广泛关注.AOS独特的...     

Seasonal changes in growth rate, morphology and alginate content in Undaria pinnatifida at the northern limit in the Sea of Japan (Russia)

The growth, morphology, alginate yield and composition of Undaria pinnatifidawas studied from March to August in 2000 and 2001 at the northern limit of distribution of the species in Peter the Great Bay, the Sea of Japan (Russia). The changes in morphology, alginate yield and composition were caused by sporophyte growth and sporulation. The average rate of biomass change was 2–5% d⁻¹. The highest alginate content (51% d.wt) was obtained from blades, with lower values for sporophylls and midribs. An increase in alginate content was detected before sporulation. The conditions seem favourable for farming the alga in this region, with June the optimum month for harvesting. This revised version was published online in August 2006 with corrections to the Cover Date.     

Increased erythromycin production by alginate as a medium ingredient or immobilization support in cultures of <Emphasis Type="BoldItalic">Saccharopolyspora erythraea</Emphasis>

Erythromycin production by Saccharopolyspora erythraea immobilized in 2% (w/v) calcium alginate or grown in medium containing 20 g sodium alginate/l inoculated with free cells was almost twice more than that of the control. S. erythraea did not consume alginate, agar, dextran, silicon antifoaming agent or cyclodextrin as a carbon source, although, all of these increased the production of erythromycin. Highest titer of erythromycin (2.3 times more than that of the control) was achieved in medium containing 1 g agar/l.