SecB modulates the nucleotide-bound state of SecA and stimulates ATPase activity

In Escherichia coli, the formation of SecA-SecB complexes has a direct effect on SecA ATPase activity. The mechanism of this interaction was evaluated and defined using controlled trypsinolysis, equilibrium dialysis at low temperature, and kinetic analyses of the SecA ATPase reaction. The proteolysis data indicate that SecB and the nonhydrolyzable ATP analogue AMP-P-C-P induce similar conformational changes in SecA which result in a more open or extended structure that is suggestive of the ATP-bound form. The effect is synergistic and concentration-dependent, and requires the occupation of both the high- and low-affinity nucleotide binding sites for maximum effect. The equilibrium dialysis experiments and kinetic data support the observation that the SecB-enhanced SecA ATPase activity is the result of an increased rate of ATP hydrolysis rather than an increase in the affinity of ATP for SecA and that the high-affinity nucleotide binding site is conformationally regulated by SecB. It appears that SecB may function as an intermolecular regulator of ATP hydrolysis by promoting the ATP-bound state of SecA. The inhibition of SecA ATPase activity by sodium azide in the presence of IMVs and a functional signal peptide further indicates that SecB promotes the ATP-bound form of SecA.     

Preprotein transfer to the Escherichia coli translocase requires the co-operative binding of SecB and the signal sequence to SecA

In Escherichia coli , precursor proteins are targeted to the membrane-bound translocase by the cytosolic chaperone SecB. SecB binds to the extreme carboxy-terminus of the SecA ATPase translocase subunit, and this interaction is promoted by preproteins. The mutant SecB proteins, L75Q and E77K, which interfere with preprotein translocation in vivo , are unable to stimulate in vitro translocation. Both mutants bind proOmpA but fail to support the SecA-dependent membrane binding of proOmpA because of a marked reduction in their binding affinities for SecA. The stimulatory effect of preproteins on the interaction between SecB and SecA exclusively involves the signal sequence domain of the preprotein, as it can be mimicked by a synthetic signal peptide and is not observed with a mutant preprotein (Δ8proOmpA) bearing a non-functional signal sequence. Δ8proOmpA is not translocated across wild-type membranes, but the translocation defect is suppressed in inner membrane vesicles derived from a prlA4 strain. SecB reduces the translocation of Δ8proOmpA into these vesicles and almost completely prevents translocation when, in addition, the SecB binding site on SecA is removed. These data demonstrate that efficient targeting of preproteins by SecB requires both a functional signal sequence and a SecB binding domain on SecA. It is concluded that the SecB–SecA interaction is needed to dissociate the mature preprotein domain from SecB and that binding of the signal sequence domain to SecA is required to ensure efficient transfer of the preprotein to the translocase.     

Signal peptide determinants of SecA binding and stimulation of ATPase activity

A signal peptide is required for entry of a preprotein into the secretory pathway, but how it functions in concert with the other transport components is unknown. In Escherichia coli, SecA is a key component of the translocation machinery found in the cytoplasm and at membrane translocation sites. Synthetic signal peptides corresponding to the wild type alkaline phosphatase signal sequence and three sets of model signal sequences varying in hydrophobicity and amino-terminal charge were generated. These were used to establish the requirements for interaction with SecA. Binding to SecA, modulation of SecA conformations sensitive to protease, and stimulation of SecA-lipid ATPase activity occur with functional signal sequences but not with transport-incompetent ones. The extent of SecA interaction is directly related to the hydrophobicity of the signal peptide core region. For signal peptides of moderate hydrophobicity, stimulation of the SecA-lipid ATPase activity is also dependent on amino-terminal charge. The results demonstrate unequivocally that the signal peptide, in the absence of the mature protein, interacts with SecA in aqueous solution and in a lipid bilayer. We show a clear parallel between the hierarchy of signal peptide characteristics that promote interaction with SecA in vitro and the hierarchy of those observed for function in vivo.     

SecA specificity for different signal peptides

SecA performs a critical function in the recognition, targeting, and transport of secretory proteins across the cytoplasmic membrane of Escherichia coli. In this study we investigate the substrate specificity of SecA, including the influence of the early mature region of the preprotein on SecA interactions, and the extent to which SecA recognizes targeting signals from different transport pathways. A series of fusion proteins were generated which involved the tandem expression of GST, signal peptide, and the first 30 residues from alkaline phosphatase. These were purified and evaluated for their ability to promote SecA ATPase activity. No significant difference in the stimulation of SecA-lipid ATPase activity between the synthetic wild-type alkaline phosphatase signal peptide and a fusion that also contains the first 30 residues of alkaline phosphatase was observed. The incorporation of sequence motifs in the mature region, which confer SecB dependence in vivo, had no impact on SecA activation in vitro. These results suggest that the early mature region of alkaline phosphatase does not affect the interactions between SecA and the signal peptide. Sec, Tat, and YidC signal peptide fusions were also assayed for their ability to stimulate SecA ATPase activity in vitro and further analyzed in vivo for the Sec dependence of the transport of the corresponding signal peptide mutants of alkaline phosphatase. Our results demonstrate that E. coli Sec signals give the highest level of SecA activation; however, SecA-signal peptide interactions in vitro are not the only arbiter of whether the preprotein utilizes the Sec pathway in vivo.     

Zinc stabilizes the SecB binding site of SecA

The molecular chaperone SecB targets preproteins to SecA at the translocation sites in the cytoplasmic membrane of Escherichia coli. SecA recognizes SecB via its carboxyl-terminal 22 aminoacyl residues, a highly conserved domain that contains 3 cysteines and 1 histidine residue that could potentially be involved in the coordination of a metal ion. Treatment of SecA with a zinc chelator resulted in a loss of the stimulatory effect of SecB on the SecA translocation ATPase activity, while the activity could be restored by the addition of ZnCl2. Interaction of SecB with the SecB binding domain of SecA is disrupted by chelators of divalent cations, and could be restored by the addition of Cu2+ or Zn2+. Atomic absorption and electrospray mass spectrometry revealed the presence of one zinc atom per monomeric carboxyl terminus of SecA. It is concluded that the SecB binding domain of SecA is stabilized by a zinc ion that promotes the functional binding of SecB to SecA.     

Selective photoaffinity labeling identifies the signal peptide binding domain on SecA

SecA, an ATPase crucial to the Sec-dependent translocation machinery in Escherichia coli, recognizes and directly binds the N-terminal signal peptide of an exported preprotein. This interaction plays a central role in the targeting and transport of preproteins via the SecYEG channel. Here we identify the signal peptide binding groove (SPBG) on SecA addressing a key issue regarding the SecA-preprotein interaction. We employ a synthetic signal peptide containing the photoreactive benzoylphenylalanine to efficiently and specifically label SecA containing a unique Factor Xa site. Comparison of the photolabeled fragment from the subsequent proteolysis of several SecAs, which vary only in the location of the Factor Xa site, reveals one 53 residue segment in common with the entire series. The covalently modified SecA segment produced is the same in aqueous solution and in lipid vesicles. This spans amino acid residues 269 to 322 of the E. coli protein, which is distinct from a previously proposed signal peptide binding site, and contributes to a hydrophobic peptide binding groove evident in molecular models of SecA.     

SecB, a molecular chaperone with two faces

SecB is a molecular chaperone unique to the phylum Proteobacteria, which includes the majority of known Gram-negative bacteria of medical, industrial and agricultural significance. SecB is involved in the translocation of secretory proteins across the cytoplasmic membrane. The crystal structure of the Haemophilus influenzae SecB provides new insights into how SecB simultaneously recognizes its two ligands: unfolded preproteins and SecA, the ATPase subunit of the translocase. SecB uses its entire molecular surface for these two functions, but for preprotein release and its own membrane release, SecB relies on the catalytic activity of SecA. This defines SecB as a translocation-specific molecular chaperone.     

Identification of the preprotein binding domain of SecA

SecA, the preprotein translocase ATPase, has a helicase DEAD motor. To catalyze protein translocation, SecA possesses two additional flexible domains absent from other helicases. Here we demonstrate that one of these "specificity domains" is a preprotein binding domain (PBD). PBD is essential for viability and protein translocation. PBD mutations do not abrogate the basal enzymatic properties of SecA (nucleotide binding and hydrolysis), nor do they prevent SecA binding to the SecYEG protein conducting channel. However, SecA PBD mutants fail to load preproteins onto SecYEG, and their translocation ATPase activity does not become stimulated by preproteins. Bulb and Stem, the two sterically proximal PBD substructures, are physically separable and have distinct roles. Stem binds signal peptides, whereas the Bulb binds mature preprotein regions as short as 25 amino acids. Binding of signal or mature region peptides or full-length preproteins causes distinct conformational changes to PBD and to the DEAD motor. We propose that (a) PBD is a preprotein receptor and a physical bridge connecting bound preproteins to the DEAD motor, and (b) preproteins control the ATPase cycle via PBD.     

The Sec system

Proteins designated to be secreted by Escherichia coli are synthesized with an amino-terminal signal peptide and associate as nascent chains with the export-specific chaperone SecB. Translocation occurs at a multisubunit membrane-bound enzyme termed translocase, which consists of a peripheral preprotein-binding site and an ATPase domain termed SecA, a core heterotrimeric integral membrane protein complex with SecY, SecE and SecG as subunits, and an accessory integral membrane protein complex containing SecD and SecF. Major new insights have been gained into the cascade of preprotein targeting events and the enzymatic mechanism or preprotein translocation. It has become clear that preproteins are translocated in a stepwise fashion involving large nucleotide-induced conformational changes of the molecular motor SecA that propels the translocation reaction.     

Structural determinants of SecB recognition by SecA in bacterial protein translocation

SecB is a bacterial chaperone involved in directing pre-protein to the translocation pathway by its specific interaction with the peripheral membrane ATPase SecA. The SecB-binding site on SecA is located at its C terminus and consists of a stretch of highly conserved residues. The crystal structure of SecB in complex with the C-terminal 27 amino acids of SecA from Haemophilus influenzae shows that the SecA peptide is structured as a CCCH zinc-binding motif. One SecB tetramer is bound by two SecA peptides, and the interface involves primarily salt bridges and hydrogen bonding interactions. The structure explains the importance of the zinc-binding motif and conserved residues at the C terminus of SecA in its high-affinity binding with SecB. It also suggests a model of SecB-SecA interaction and its implication for the mechanism of pre-protein transfer in bacterial protein translocation.     

Development of a high-throughput screening assay for the discovery of small-molecule SecA inhibitors

A major pathway for bacterial preprotein translocation is provided by the Sec-dependent preprotein translocation pathway. Proteins destined for Sec-dependent translocation are synthesized as preproteins with an N-terminal signal peptide, which targets them to the SecYEG translocase channel. The driving force for the translocation reaction is provided by the peripheral membrane ATPase SecA, which couples the hydrolysis of ATP to the stepwise transport of unfolded preproteins across the bacterial membrane. Since SecA is essential, highly conserved among bacterial species, and has no close human homologues, it represents a promising target for antibacterial chemotherapy. However, high-throughput screening (HTS) campaigns to identify SecA inhibitors are hampered by the low intrinsic ATPase activity of SecA and the requirement of hydrophobic membranes for measuring the membrane or translocation ATPase activity of SecA. To address this issue, we have developed a colorimetric high-throughput screening assay in a 384-well format, employing an Escherichia coli (E. coli) SecA mutant with elevated intrinsic ATPase activity. The assay was applied for screening of a chemical library consisting of ∼27,000 compounds and proved to be highly reliable (average Z′ factor of 0.89). In conclusion, a robust HTS assay has been established that will facilitate the search for novel SecA inhibitors.     

Energetics of SecA dimerization

Transport of many proteins to extracytoplasmic locations occurs via the general secretion (Sec) pathway. In Escherichia coli, this pathway is composed of the SecYEG protein-conducting channel and the SecA ATPase. SecA plays a central role in binding the signal peptide region of preproteins, directing preproteins to membrane-bound SecYEG and promoting translocation coupled with ATP hydrolysis. Although it is well established that SecA is crucial for preprotein transport and thus cell viability, its oligomeric state during different stages of transport remains ill defined. We have characterized the energetics of SecA dimerization as a function of salt concentration and temperature and defined the linkage of SecA dimerization and signal peptide binding using analytical ultracentrifugation. The use of a new fluorescence detector permitted an analysis of SecA dimerization down to concentrations as low as 50 nM. The dimer dissociation constants are strongly dependent on salt. Linkage analysis indicates that SecA dimerization is coupled to the release of about five ions, demonstrating that electrostatic interactions play an important role in stabilizing the SecA dimer interface. Binding of signal peptide reduces SecA dimerization affinity, such that K_d increases about 9-fold from 0.28 μM in the absence of peptide to 2.68 μM in the presence of peptide. The weakening of the SecA dimer that accompanies signal peptide binding may poise the SecA dimer to dissociate upon binding to SecYEG.     

Dimeric SecA couples the preprotein translocation in an asymmetric manner

The Sec translocase mediates the post-translational translocation of a number of preproteins through the inner membrane in bacteria. In the initiatory translocation step, SecB targets the preprotein to the translocase by specific interaction with its receptor SecA. The latter is the ATPase of Sec translocase which mediates the post-translational translocation of preprotein through the protein-conducting channel SecYEG in the bacterial inner membrane. We examined the structures of Escherichia coli Sec intermediates in solution as visualized by negatively stained electron microscopy in order to probe the oligomeric states of SecA during this process. The symmetric interaction pattern between the SecA dimer and SecB becomes asymmetric in the presence of proOmpA, and one of the SecA protomers predominantly binds to SecB/proOmpA. Our results suggest that during preprotein translocation, the two SecA protomers are different in structure and may play different roles.     

Competition between functional signal peptides demonstrates variation in affinity for the secretion pathway.

We have developed a system for examining the relative affinity of two different signal peptides for the protein secretion pathway in Escherichia coli. This system involves the expression of a modified alkaline phosphatase which possesses two signal peptides arranged in tandem. When both signal peptides have the wild-type sequence, cleavage after the first and cleavage after the second occur with nearly equal frequency. In both cases the remainder of the protein is transported to the periplasm. Thus both signal peptides effectively compete with each other for entrance to the secretion pathway. When the hydrophobicity of the second signal peptide is altered by small increments, we find that the more hydrophobic signal peptide is preferentially utilized. Thus, a more hydrophobic signal peptide can outcompete even an efficient wild-type signal sequence. The crossover point, for utilization of the second to the first signal peptide, is marked and occurs over a very small change in hydrophobicity. Our results suggest that the small differences in the hydrophobicity of wild-type signal peptides may have critical consequences: preproteins with the more hydrophobic signals could dominate one pathway, leaving those with only slightly less hydrophobic signals to require additional factors such as chaperonins, SecB, and other binding proteins.     

Interaction of SecB and SecA with the N-terminal region of mature alkaline phosphatase on its secretion in Escherichia coli

Export-specific chaperone SecB and translocational ATPase SecA catalyze the cytoplasmic steps of Sec-dependent secretion in Escherichia coli. Their effects on secretion of periplasmic alkaline phosphatase (PhoA) were shown to depend on the N-terminal region of the mature PhoA sequence contained in the PhoA precursor. Amino acid substitutions in the vicinity of the signal peptide (positions +2, +3) not only dramatically inhibited secretion, but also reduced its dependence on SecB and SecA. Immunoprecipitation reported their impaired binding with mutant prePhoA. The results testified that SecB and SecA interact with the mature PhoA region located close to the signal peptide in prePhoA.     

Demonstration of a specific Escherichia coli SecY-signal peptide interaction

Protein translocation in Escherichia coli is initiated by the interaction of a preprotein with the membrane translocase composed of a motor protein, SecA ATPase, and a membrane-embedded channel, the SecYEG complex. The extent to which the signal peptide region of the preprotein plays a role in SecYEG interactions is unclear, in part because studies in this area typically employ the entire preprotein. Using a synthetic signal peptide harboring a photoaffinity label in its hydrophobic core, we examined this interaction with SecYEG in a detergent micellar environment. The signal peptide was found to specifically bind SecY in a saturable manner and at levels comparable to those that stimulate SecA ATPase activity. Chemical and proteolytic cleavage of cross-linked SecY and analysis of the signal peptide adducts indicate that the binding was primarily to regions of the protein containing transmembrane domains seven and two. The signal peptide-SecY interaction was affected by the presence of SecA and nucleotides in a manner consistent with the transfer of signal peptide to SecY upon nucleotide hydrolysis at SecA.     

Maximal efficiency of coupling between ATP hydrolysis and translocation of polypeptides mediated by SecB requires two protomers of SecA

SecA is the ATPase that provides energy for translocation of precursor polypeptides through the SecYEG translocon in Escherichia coli during protein export. We showed previously that when SecA receives the precursor from SecB, the ternary complex is fully active only when two protomers of SecA are bound. Here we used variants of SecA and of SecB that populate complexes containing two protomers of SecA to different degrees to examine both the hydrolysis of ATP and the translocation of polypeptides. We conclude that the low activity of the complexes with only one protomer is the result of a low efficiency of coupling between ATP hydrolysis and translocation.     

Interaction of SecB and SecA with the N-Terminal Region of Mature Alkaline Phosphatase on Its Secretion in Escherichia coli

Export-specific chaperone SecB and translocational ATPase SecA catalyze the cytoplasmic steps of Sec-dependent secretion in Escherichia coli. Their effects on secretion of periplasmic alkaline phosphatase (PhoA) were shown to depend on the N-terminal region of the mature PhoA sequence contained in the PhoA precursor. Amino acid substitutions in the vicinity of the signal peptide (positions +2, +3) not only dramatically inhibited secretion, but they also reduced its dependence on SecB. Immunoprecipitation reported their impaired binding with mutant prePhoA. The results testified that SecB and SecA interact with the mature PhoA region located close to the signal peptide in prePhoA.     

Functional signal peptides bind a soluble N-terminal fragment of SecA and inhibit its ATPase activity

The selective recognition of pre-secretory proteins by SecA is essential to the process of protein export from Escherichia coli, yet very little is known about the requirements for recognition and the mode of binding of precursors to SecA. The major reason for this is the lack of a soluble system suitable for biophysical study of the SecA-precursor complex. Complicating the development of such a system is the likelihood that SecA interacts with the precursor in a high affinity, productive manner only when it is activated by binding to membrane and SecYEG. A critical aspect of the precursor/SecA interaction is that it is regulated by various SecA ligands (nucleotide, lipid, SecYEG) to facilitate the release of the precursor, most likely in a stepwise fashion, for translocation. Several recent reports show that functions of SecA can be studied using separated domains. Using this approach, we have isolated a proteolytically generated N-terminal fragment of SecA, which is stably folded, has high ATPase activity, and represents an activated version of SecA. We report here that this fragment, termed SecA64, binds signal peptides with significantly higher affinity than does SecA. Moreover, the ATPase activity of SecA64 is inhibited by signal peptides to an extent that correlates with the ability of these signal peptides to inhibit either SecA translocation ATPase or in vitro protein translocation, arguing that the interaction with SecA64 is functionally significant. Thus, SecA64 offers a soluble, well defined system to study the mode of recognition of signal peptides by SecA and the regulation of signal peptide release.     

The F286Y mutation of PrlA4 tempers the signal sequence suppressor phenotype by reducing the SecA binding affinity.

SecYEG forms the protein-conducting channel of the Escherichia coli translocase. It binds the peripheral ATPase SecA that drives the preprotein translocation reaction. PrlA4 is a double mutant of SecY that enables the translocation of preproteins with a defective or even missing signal sequence. The effect of the individual mutations, F286Y and I408N, was studied with SecYEG proteoliposomes. SecY(I408N) is responsible for the increased translocation of preproteins with a defective and normal signal sequence, and exhibits a stronger prl phenotype than PrlA4. This activity correlates with an elevated SecA-translocation ATPase and SecA binding affinity. SecY(F286Y) supports only a low SecA binding affinity, preprotein translocation and SecA translocation ATPase activity. These results suggest that the second site F286Y mutation reduces the strength of the I408N mutation of PrlA4 by lowering the SecA binding affinity.