Complicated Wavefront Shaping of Surface Plasmon Polaritons on Metal Surface by Holographic Groove Patterns

Surface plasmon polaritons (SPPs) manipulation on metal surfaces is important for constructing ultracompact integrated micro/nano-optical devices and systems. We employ the methodology of surface electromagnetic wave holography (SWH) to design holographic groove patterns for controlling SPPs with complicated wavefronts traveling on metal surface. SPPs are scattered by these deli groove patterns and interfere with each other to form desired SPP wavefronts. Several devices are demonstrated to control the intensities and phases of SPPs, such as focusing a plane SPP or diverging SPPs to two points with different phases, and focusing SPPs with complicated beam profile to a point. The finite-difference time-domain simulations show that in all cases, the predesignated functionalities are fully achieved by the designed plasmonic holographic structures. The results strongly support the power of SWH for shaping the complicated wavefront of in-plane transporting SPPs.     

An Efficient Large-Area Grating Coupler for Surface Plasmon Polaritons

We report the design, fabrication, and characterization of a periodic grating of shallow rectangular grooves in a metallic film with the goal of maximizing the coupling efficiency of an extended plane wave (PW) of visible or near-infrared light into a single surface plasmon polariton (SPP) mode on a flat metal surface. A PW-to-SPP power conversion factor >45% is demonstrated at a wavelength of 780?nm, which exceeds by an order of magnitude the experimental performance of SPP grating couplers reported to date at any wavelength. Conversion efficiency is maximized by matching the dissipative SPP losses along the grating surface to the local coupling strength. This critical coupling condition is experimentally achieved by tailoring the groove depth and width using a focused ion beam.     

Surface Plasmon Polariton Modes at Interface of a Metal and an Ambichiral Sculptured Thin Film

The excitation of surface plasmon polariton (SPP) at interface of a metal and an ambichiral sculptured thin film was theoretically investigated in the Kretschmann configuration using the transfer matrix method. The dependence of SPP modes for a P polarization plane wave on the incident angle of light and the angle of rise of nanocolumns of ambichiral dielectric medium was reported. We found that multiple SPP modes are excited at the interface of metal and ambichiral dielectric medium. The results of phase speed as a function of pitch showed only that a SPP mode can be excited at all pitches.     

Polarization Properties of Selectively Gold-filled Suspended Core Microstructured Optical Fibers

We study the polarization properties of suspended core microstructured optical fibers (SC-MOFs) with hexagonal lattice structure and high air-filling fraction having a single gold-filled hole along the horizontal axis. The interaction between the core-guided light and metal leads to surface plasmon resonance (SPR) at particular frequencies where the phase-matching condition is satisfied. We observe from the modal analysis that MOFs with high air-filling fraction offer the possibility of coupling of the fundamental mode with the first-order surface plasmon polariton (SPP) mode. With the increase in the suspension factor (SF), the fundamental mode couples with higher order SPP modes and the coupling strength also enhances. It also leads to an increase in modal birefringence. Reduction in beat length by an order of magnitude compared to the reported values is being reported for the first time to our knowledge. We have achieved the lowest beat length of 0.0105 mm at 1 μm wavelength for the structure having d/Λ = 0.85 and SF = 1.65. The results show that such plasmonic SC-MOFs may perform as efficient in-fiber polarizers and polarization filters.

     

Excitation of Multiple Surface Plasmon-Polaritons by a Metal Layer Inserted in an Equichiral Sculptured Thin Film

Excitation of multiple surface plasmon-polaritons (SPPs) by an equichiral sculptured thin film with a metal layer defect was studied theoretically in the Sarid configuration, using the transfer matrix method. Multiple SPP modes were distinguished from waveguide modes in optical absorption for p-polarized plane wave. The degree of localization of multiple SPP waves was investigated by calculation of the time-averaged Poynting vector. The results showed that the long-range and short-range SPP waves can simultaneously be excited at both interfaces of metal core in this proposed structure which may be used in a broad range of sensing applications.     

Hybrid Plasmonic Waveguide Based on Tapered Dielectric Nanoribbon: Excitation and Focusing

The nanofocusing of light source was proposed and simulated using the dielectric-loaded surface plasmon polariton (SPP) model with various laterally tapered planar dielectric architectures on the top surface of the metal. By using finite-difference time-domain method, enhancement factor for the local electric field under distinctive incident polarization was analyzed with different taper apexes under various incident wavelengths and incident angles of the excitation laser. The SPP dispersion and the effect of dissipation on adiabatic nanofocusing of SPP in a sharp taper structure were used to predict the optimal taper angles of the structure and to explain the phenomena of SPP wave slowing down as it propagating toward the taper end. This SPP nanofocusing process was also experimentally realized by illuminating the structure of a tapered CdS nanoribbon deposited on the Ag surface. As the emission of the focused SPP at the taper end, the proposed plasmonic structure can be severed as a light nanosource emitter in the future optical integrated circuits.     

A Dielectric-Thickness-Adjusting Method for Manipulating Graphene Surface Plasmon Polariton

We propose and numerically investigate a dielectric-thickness-adjusting method to manipulate the graphene surface plasmon polariton (SPP). The dispersion relationships of graphene SPP at different dielectric thickness are derived by solving the analytic equations. In addition, the SPP effective index at cutoff dielectric thickness is obtained according to different dielectric permittivity and working frequencies. As a typical application, a plasmonic Bragg reflector is designed by alternately depositing dielectric gratings along the transverse direction of the SPP propagation. The performance of the Bragg reflector is analyzed at different grating thickness, and the effective index at cutoff thickness is verified by numerical simulation. The proposed method will have important potential prospects in designing graphene-based wave trapping and slow wave devices in future.     

Directional Excitation of Surface Plasmon Polaritons by Circularly Polarized Vortex Beams

We investigate the excitation of surface plasmon polaritons (SPPs) using a metallic nanoaperture array illuminated by circularly polarized Laguerre-Gaussian (LG) vortex beams. The direction of SPP excitation is tunable by changing the circular polarization and topological charge of LG beams. The left- or right-handed circular polarization determines SPP propagation on either side of the nanoaperture array. Furthermore, varying the topological charge of LG beam will result in beam splitting of SPPs. We also utilize a composite nanoaperture array with different periods to achieve unidirectional excitation of SPPs. The study provides an interesting approach to control the excitation direction of SPPs and may find great applications in SPP generators and optical switches.

     

Analysis of the Scattering of Surface Plasmon Polariton Waves from a Perfectly Conducting Circular Cylinder

Surface plasmon polariton (SPP) waves are the most extensively studied waves among various types of surface waves because they are easy to excite and have been used in many optical applications particularly for plasmonic communication, sensing, and harvesting solar energy. In all these applications, especially on-chip plasmonic communication, scattering can be an important issue to deal with. Therefore, this paper aimed to theoretically inspect the scattering pattern of SPP waves from a perfect electric conductor (PEC) cylindrical scatterer. The cylindrical wave approach is used to solve the scattering problem by a cylindrical object placed below a metallic layer. The scattering is investigated thoroughly by changing the size of the scatterer and its distance from the interface along which the SPP wave is excited. As the size of the scatterer increases, the scattering increases significantly. On the other hand, when the distance of the scatterer from the interface is increased, the scattered field becomes small. Two-dimensional field maps are produced for the incident angle at which SPP is excited. Numerical results are also presented for other incident angles to make a comparison. Furthermore, the forward and backward far-fields are significantly enhanced if the SPP wave is scattered in comparison with when the SPP wave is not present.

     

Tunable Spoof Surface Plasmons Bulleye Antenna

A tunable spoof surface plasmons antenna using sinusoidally modulated corrugated reactance surface based on a bulleye structure is proposed in this paper. The designed antenna is made of concentric metallic grooves etched on a metal plate, the depth of which is of sinusoidal periodic variation in the radial direction. This makes it possible that highly confined spoof surface plasmons along corrugated surface can be converted to radiation modes. The proposed bulleye antenna can work from 25.8 to 33 GHz and a bandwidth of 7.2 GHz and its main lobe can be directed at 30^∘ from the vertical direction at 30 GHz. This antenna has a maximum gain of 15 dB and its main lobe can scan from 14^∘ to 58^∘ by tuning the frequency from 28 to 32 GHz.

     

Nano-Scale THz Wave Propagating with Ultra-Low Loss

A metal nanowire placed in a dielectric hole is proposed to guide THz modified surface plasmon polaritons (MSPPs). In theory, the MSPP waveguide can guide THz wave with nano-scale mode width (570 nm) and simultaneously ultra-long propagation distance (2.4 m). Compared with conventional surface plasmon polaritons (SPPs) on a bare metal nanowire, the MSPPs’ mode nanoconfinement can be maintained by keeping a part of the mode field nearly unchanged. On the other hand, by modifying the rest of the mode field, the THz power inside the metal nanowire can be significantly reduced for MSPPs, which dramatically decreases the propagation loss (3 orders of magnitude).

     

Retarded Charge–Carrier Recombination in Photoelectrochemical Cells from Plasmon‐Induced Resonance Energy Transfer

N‐type metal oxides such as hematite (α‐Fe₂O₃) and bismuth vanadate (BiVO₄) are promising candidate materials for efficient photoelectrochemical water splitting; however, their short minority carrier diffusion length and restricted carrier lifetime result in undesired rapid charge recombination. Herein, a 2D arranged globular Au nanosphere (NS) monolayer array with a highly ordered hexagonal hole pattern (hereafter, Au array) is introduced onto the surface of photoanodes comprised of metal oxide films via a facile drying and transfer‐printing process. Through plasmon‐induced resonance energy transfer, the Au array provides a strong electromagnetic field in the near‐surface area of the metal oxide film. The near‐field coupling interaction and amplification of the electromagnetic field suppress the charge recombination with long‐lived photogenerated holes and simultaneously enhance the light harvesting and charge transfer efficiencies. Consequently, an over 3.3‐fold higher photocurrent density at 1.23 V versus reversible hydrogen electrode (RHE) is achieved for the Au array/α‐Fe₂O₃. Furthermore, the high versatility of this transfer printing of Au arrays is demonstrated by introducing it on the molybdenum‐doped BiVO₄ film, resulting in 1.5‐fold higher photocurrent density at 1.23 V versus RHE. The tailored metal film design can provide a potential strategy for the versatile application in various light‐mediated energy conversion and optoelectronic devices.     

Near-Field Coupling Method for Subwavelength Surface Plasmon Polariton Waveguides

A near-field coupling method for studying propagation properties of surface plasmon polariton (SPP) in subwavelength dielectric-loaded SPP waveguides (DLSPPWs) is presented. In this method, a tapered fiber probe is employed to generate a nanometer optical spot. When this spot is near the entrance of the DLSPPW with its polarization parallel to the waveguide, a strong guiding wave is observed by a leakage radiation microscope. For DLSPPWs with a dielectric height of about 600 nm, we observed SPP waves with zigzag propagation patterns at 650 nm wavelength. Such zigzag propagation results in a great reduction of propagation loss. In addition, the zigzag wave has a strong optical confinement. The bending loss for an L-bend DLSPPW is only about 0.4 dB.     

Engineering the Optical Response of the Novel Plasmonic Binary Nanohole Array

The phenomenon of extraordinary optical transmission (EOT) due to its advantages has been considered by researchers in various applications, and in recent years, many efforts have been made to engineer these structures to get the best possible response for desired applications. In this work, the optical properties of novel binary gold nanohole arrays are investigated theoretically. We engineered the optical response of the system by adjusting the ratio of contribution of surface plasmon polariton (SPP) to localized surface plasmon resonance (LSPR) through the manipulation of the geometrical properties. The changes in the topology of this nanohole array affected the intensity and the wavelength of transmission peaks. The sensitivity of the optical response to the refractive index was also investigated. The designed structure is a good candidate for use as a polarization-independent optical label-free sensor.

     

Simultaneous Excitation of Surface Plasmon Polaritons on Both Interfaces in an Asymmetric Dielectric-Metal Corrugated Structure

The simultaneous excitation of plasmon polaritons on both surfaces of metal film was studied for asymmetric dielectric-metal-dielectric corrugated structures. Due to the small resonant absorption of the incident light on the transmission side of the structure, we investigated the enhancement of the surface plasmon polaritons on the mentioned side by controlling the structure parameters. When the illuminate light changes from normal incidence to non-normal incidence, the resonant absorption peak splits into a doublet. The simultaneous excitation of surface plasmon polaritons on both surfaces of the metal film can be achieved by controlling the incident angle. Since the wave vector matching condition is not satisfied, there is no coupling between the plasmon polaritons modes on the two surfaces of the corrugated metallic film. The excitation and control of the non-coupled surface plasmon polartions simultaneously propagating on the different interfaces of one metallic film have potential applications for designing novel compact and tunable nano-photonic devices at visible frequency.     

Conditions for Loss Compensation of Surface Plasmon Polaritons Propagation on a Metal/Gain Medium Boundary

One way to compensate for the surface plasmon polariton (SPP) propagation losses is to use a gain medium. However, simply ensuring high enough gain is not sufficient because it may violate the bounded character of the wave. Therefore, a detailed theoretical analysis is needed for the determination of the conditions for lossless or amplified SPP propagation. Here presented is an exact theoretical analysis of the SPP propagation in the case of an infinite metal/gain medium boundary. It is shown that the conditions for lossless/amplified SPP propagation can be conveniently examined and presented as a simply connected region in the complex plane of the gain medium dielectric function. Effective and minimum gain parameters are introduced, which facilitates the simultaneous analyses of different gain media/metals combinations. The practical application of these results is illustrated for several gain media/metal (silver, gold and aluminium) systems.     

Surface-Enhanced Raman Scattering (SERS) on 1D Nano-gratings

Surface-enhanced Raman scattering (SERS) enhancement factor (EF) is among the major applications of surface plasmon polaritons (SPP’s). In this work, the SERS EF of 1D rectangular and sinusoidal-shaped gold (Au) grating structures has been designed and optimized on Au film using COMSOL multiphysics (5.3a) RF module taking glass as substrate. The 1D grating models are simulated by variation in slit width ranging 200–600 nm while other parameters including periodicity of 700 nm and Au film thickness of 50 nm remained fixed. In order to study the several phenomena including enhanced optical transmission and SERS EF, the transmission and electric field spectra have been obtained from both types of grating structures. In agreement with fundamental plasmonic mode, the slit width of two-thirds of the periodicity found to be optimum for SERS EF. Remarkable value of SERS EF is obtained in the case of a sinusoidal Au grating device (6.4 × 10⁹) which is calculated to be five times that of the rectangular grating (1.2 × 10⁹). These devices are also the fingerprints of molecules, hence find applications in biosensing, pollution control, and chemical and food industry.

     

One Dimensional Plasmonic Grating: High Sensitive Biosensor

We report a simple 1D grating device fabrication on ～50 nm gold (Au) film deposited on glass, which is employed as a high performance refractive index (RI) sensor by exploiting the surface plasmon polaritons (SPP) excited by the grating device along the Au/analyte interface. A finite element analysis (FEA) method is employed to maximize the sensitivity of the sensor for a fixed period and thickness of a gold film and its close correspondence with experiment has given the insight for high sensitivity and enhanced transmission. Significantly, in the context of economic design and performance, it is shown that an optimally designed and fabricated 1D grating can be as sensitive as 524 nm/RIU (linearity RI?=?1.33303 to 1.47399), which is remarkably higher than existing reports operating in a similar wavelength region.     

Coherence Converting Plasmonic Hole Arrays

Simulations are presented that demonstrate that the global state of spatial coherence of an optical wavefield can be altered on transmission through an array of subwavelength-sized holes in a metal plate that supports surface plasmons. It is found that the state of coherence of the emergent field strongly depends on the separation between the holes and their scattering strength. Our findings suggest that subwavelength hole arrays on a metal film can be potentially employed as a plasmon-assisted coherence converting device, useful in modifying the directionality, spectrum, and polarization of the transmitted wave.