Effect of sucrose on dynamic mechanical characteristics of maize and potato starch films

The dynamic mechanical properties of prepared maize and potato starch films were evaluated for mixtures containing 0%, 10% and 15% (w/w) of sucrose at temperatures ranging from 40.0 to 140.0 °C. The spectra of storage modulus (G′), loss modulus (G″), and loss factor (tan δ) of starch films were acquired. Remarkable reduction in the glass transition temperature of maize and potato starch films was observed with the increasing sucrose content. The spectra of storage modulus (G′), loss modulus (G″), and loss factor (tan δ) were measured for the second and third time after two and seven days, respectively. The peaks of loss factor (tan δ) appeared at 59.81 ± 1.86 °C and 95.96 ± 1.67 °C after two-day-storage, but only one peak appeared at 85.46 ± 5.50 °C after seven days. A shifting trend from higher to lower temperature for loss factor was observed after seven days.     

Miscibility studies of HPMC/PEG blends in water by viscosity,density, refractive index and ultrasonic velocity method

Hydroxy propyl methyl cellulose (HPMC)/polyethylene glycol (PEG) blends are edible polymer films used for food packing and directly in foodstuffs. However, they are water-soluble in ordinary temperature and have good mechanical properties. The miscibility of HPMC/PEG blend in water was studied by viscosity, ultrasonic velocity, density and refractive index techniques at 30 and 50 °C. Using viscosity data, the interaction parameters μ and α were calculated. These values revealed that HPMC/PEG blend is miscible when the HPMC content is more than 60 wt.% in the blend at 30 and 50 °C, below which is immiscible. Further the result was also confirmed by ultrasonic velocity, density, refractive index measurements, which also revealed that the change in temperature has no significant effect on the miscibility of HPMC/PEG polymer blend.     

Physicochemical characterization of chitin and chitosan from crab shells

Crab chitosan was prepared by alkaline N-deacetylation of crab chitin for 60, 90 and 120 min and the yields were 30.0-32.2% with that of chitosan C120 being the highest. The degree of N-deacetylation of chitosans (83.3–93.3%) increased but the average molecular weight (483–526 kDa) decreased with the prolonged reaction time. Crab chitosans showed lower lightness and WI values than purified chitin, chitosans CC and CS but higher than crude chitin. With the prolonged reaction time, the nitrogen (8.9–9.5%), carbon (42.2–45.2%) and hydrogen contents (7.9–8.6%) in chitosans prepared consistently increased whereas N/C ratios remained the same (0.21). Crab chitosans prepared showed a melting endothermic peak at 152.3–159.2 °C. Three chitosans showed similar microfibrillar crystalline structure and two crystalline reflections at 2θ = 8.8–9.0° and 18.9–19.1°. Overall, the characteristics of three crab chitosans were unique and differed from those of chitosan CC and CS as evidenced by the element analysis, differential scanning calorimetry, scanning electron microscopy and X-ray diffraction patterns.     

Target Binding to S100B Reduces Dynamic Properties and Increases Ca2 +-Binding Affinity for Wild Type and EF-Hand Mutant Proteins

Mutations in the second EF-hand (D61N, D63N, D65N, and E72A) of S100B were used to study its Ca^2 + binding and dynamic properties in the absence and presence of a bound target, TRTK-12. With ^D63NS100B as an exception (^D63NK_D = 50 ± 9 μM), Ca^2 + binding to EF2-hand mutants were reduced by more than 8-fold in the absence of TRTK-12 (^D61NK_D = 412 ± 67 μM, ^D65NK_D = 968 ± 171 μM, and ^E72AK_D = 471 ± 133 μM), when compared to wild-type protein (^WTK_D = 56 ± 9 μM). For the TRTK-12 complexes, the Ca^2 +-binding affinity to wild type (^WT + TRTKK_D = 12 ± 10 μM) and the EF2 mutants was increased by 5- to 14-fold versus in the absence of target (^{D61N + TRTK}K_D = 29 ± 1.2 μM, ^{D63N + TRTK}K_D = 10 ± 2.2 μM, ^{D65N + TRTK}K_D = 73 ± 4.4 μM, and ^{E72A + TRTK}K_D = 18 ± 3.7 μM). In addition, R_ex, as measured using relaxation dispersion for side‐chain ¹⁵N resonances of Asn63 (^D63NS100B), was reduced upon TRTK-12 binding when measured by NMR. Likewise, backbone motions on multiple timescales (picoseconds to milliseconds) throughout wild type, ^D61NS100B, ^D63NS100B, and ^D65NS100B were lowered upon binding TRTK-12. However, the X-ray structures of Ca^2 +-bound (2.0 Å) and TRTK-bound (1.2 Å) ^D63NS100B showed no change in Ca^2 + coordination; thus, these and analogous structural data for the wild-type protein could not be used to explain how target binding increased Ca^2 +-binding affinity in solution. Therefore, a model for how S100B–TRTK‐12 complex formation increases Ca^2 + binding is discussed, which considers changes in protein dynamics upon binding the target TRTK-12.     

Racemization study on different N-acetylamino acids by a recombinant N-succinylamino acid racemase from Geobacillus kaustophilus CECT4264

N-Succinylamino acid racemase (NSAAR) with N-acylamino acid racemase (NAAAR) activity together with a d- or l-aminoacylase allows the total transformation of N-acetylamino acid racemic mixtures into optically pure d- or l-amino acids, respectively. In this work we have cloned and expressed the N-succinylamino acid racemase gene from the thermophilic Bacillus-related species Geobacillus kaustophilus CECT4264 in Escherichia coli BL21 (DE3). G. kaustophilus NSAAR (GkNSAAR) was purified in a one-step procedure by immobilized cobalt affinity chromatography and showed an apparent molecular mass of 43 kDa in SDS-gel electrophoresis. Size exclusion chromatography analysis determined a molecular mass of about 150 kDa, suggesting that the native enzyme is a homotetramer. Optimum reaction conditions for the purified enzyme were 55 °C and pH 8.0, using N-acetyl-d-methionine as substrate. GkNSAAR showed a gradual loss of activity at preincubation temperatures over 60 °C, suggesting that it is thermostable. As activity was greatly enhanced by Co²⁺, Mn²⁺ and Ni²⁺ but inhibited by metal-chelating agents, it is considered a metalloenzyme. The Co²⁺-dependent activity profile of the enzyme was studied with no detectable inhibition at higher metal ion concentrations. GkNSAAR showed activity towards both aliphatic and aromatic N-acetylamino acids such as N-acetyl-methionine and N-acetyl-phenylalanine, respectively, with k_cat/K_m values ranging from 1 × 10³ to 9 × 10³ s^?1 M^?1. Kinetic parameters were better for N-acetyl-d-amino acids than for N-acetyl-l-specific ones.     

Comparison of MRI properties between derivatized DTPA and DOTA gadolinium–dendrimer conjugates

In this report we directly compare the in vivo and in vitro MRI properties of gadolinium–dendrimer conjugates of derivatized acyclic diethylenetriamine-N,N′,N′,N″,N″-pentaacetic acid (1B4M-DTPA) and macrocyclic 1,4,7,10-tetraazacyclododecane-N,N′,N″,N?-tetraacetic acid (C-DOTA). The metal–ligand chelates were pre-formed in alcohol prior to conjugation to the generation 4 PAMAM dendrimer (G4D), and the dendrimer-based agents were purified by Sephadex® G-25 column. The analysis and SE-HPLC data indicated chelate to dendrimer ratios of 30:1 and 28:1, respectively. Molar relaxivity measured at pH 7.4, 22 °C, and 3T are comparable (29.5 vs 26.9 mM^?1 s^?1), and both conjugates are equally viable as MRI contrast agents based on the images obtained. The macrocyclic agent however exhibits a faster rate of clearance in vivo (t_1/2 = 16 vs 29 min). Our conclusion is that the macrocyclic-based agent is the more suitable agent for in vivo use for these reasons combined with kinetic inertness associated with the Gd(III) DOTA complex stability properties.     

Chitosan–caffeic acid–genipin films presenting enhanced antioxidant activity and stability in acidic media

The use of chitosan films has been limited due to their high degradability in aqueous acidic media. In order to produce chitosan films with high antioxidant activity and insoluble in acid solutions caffeic acid was grafted to chitosan by a radical mechanism using ammonium cerium (IV) nitrate (60 mM). Genipin was used as cross-linker. This methodology originated films with 80% higher antioxidant activity than the pristine film. Also, these films only lost 11% of their mass upon seven days immersion into an aqueous solution at pH 3.5 under stirring. The films surface wettability (contact angle 105°), mechanical properties (68 MPa of tensile strength and 4% of elongation at break), and thermal stability for temperatures lower than 300 °C were not significantly influenced by the covalent linkage of caffeic acid and genipin to chitosan. Due to their characteristics, mainly higher antioxidant activity and lower solubility, these are promising materials to be used as active films.     

Substituted polyaniline/chitosan composites: Synthesis and characterization

Substituted polyaniline/chitosan(PANIs/Ch) composites were chemically synthesized by using ammonium peroxydisulfate as oxidant and characterized by measurements of conductivity, FTIR, UV–vis, SEM and TGA techniques. FTIR spectra of the composites revealed that there is a strong interaction between substituted polyanilines and chitosan. Among the substituted polyaniline/chitosan composites synthesized, poly(N-ethylaniline)/chitosan PNEANI/Ch has the highest conductivity with a value of 1.68 × 10^?4 S/cm. The P2EANI/Ch composite exhibited higher thermal stability than the other composites. SEM images of the composites showed an agglomerated granular morphology of substituted polyaniline particles coated on the surface of chitosan.     

Direct in vivo interaction of the antibiotic primycin with the plasma membrane of Candida albicans: An EPR study

The direct interaction of the antibiotic primycin with the plasma membrane was investigated by employing the well-characterized ergosterol-producing, amphotericin B-sensitive parental Candida albicans strain 33erg⁺ and its ergosterol-less amphotericin B-resistant plasma membrane mutant erg-2. The growth inhibition concentration in shaken liquid medium was 64 μg ml^?1 for 33erg⁺ and 128 μg ml^?1 for erg-2, suggesting that the plasma membrane composition influences the mode of action of primycin. To determine the primycin-induced changes in the plasma membrane dynamic, electron paramagnetic resonance (EPR) spectroscopy methods were used, the spin-labeled fatty acid 5-(4,4-dimethyloxazolidine-N-oxyl)stearic acid) being applied for the in vivo measurements. The phase transition temperatures of untreated strain 33erg⁺ and its mutant erg-2 were 12.5 °C and 11 °C, respectively. After 128 μg ml^?1 primycin treatment, these values increased to 17.5 °C and 16 °C, revealing a significant reduction in the phospholipid flexibility. Saturation transfer EPR measurements demonstrated that, the rotational correlation times of the spin label molecule for the control samples of 33erg⁺ and erg-2 were 60 ns and 100 ns. These correlation times gradually decreased on the addition of increasing primycin concentrations, reaching 8 μs and 1 μs. The results indicate the plasma membrane “rigidizing” effect of primycin, a feature that may stem from its ability to undergo complex formation with membrane constituent fatty acid molecules, causing alterations in the structures of phospholipids in the hydrophobic surface near the fatty acid chain region.     

Synthesis of fluorinated carbazoles via C–H arylation catalyzed by Pd/Cu bimetal system and their antibacterial activities

An effective intramolecular C–H arylation reaction catalyzed by a bimetallic catalytic system Pd(OAc)₂/CuI for the synthesis of fluorine-substituted carbazoles from corresponding N-phenyl-2-haloaniline derivatives under ligand free conditions is demonstrated. The established method is effective for both N-phenyl-2-bromoaniline and N-phenyl-2-chloroaniline, and requires the low loading of Pd(OAc)₂ (0.5 mol %). A series of new fluorinated carbazoles were synthesized in excellent yields using the protocol (>83%, 19 examples) and were fully characterized by ¹H, ¹³C and ¹⁹F NMR spectral data, HRMS and elemental analysis. All compounds were evaluated for their antibacterial activities against four bacteria (Bacillus subtilis, Staphylococcus aureus, Escherichia coli and methicillin-resistant S. aureus with resistance to gentamicin) by serial dilution technique. All tested compounds showed antibacterial activity against three test strains (S. aureus, B. subtilis and MRSA), and most of these compounds displayed pronounced antimicrobial activities against these three strains with low MIC values ranging from 0.39 to 6.25 μg/mL. Among them, compounds 7 and 14 exhibited potent inhibitory activity better than reference drugs meropenem and streptomycin. Three compounds (2, 4 and 5) showed antibacterial activity against E. coli. with MIC values from 12.5 to 25 μg/mL.     

Effect of cryopreservation and microencapsulation of lactic acid bacterium Enterococcus faecium MC13 for long-term storage

The aim of this work was to investigate the effect of cryoprotectants on the survival of probiotic bacterium Enterococcus faecium MC13 during freeze drying and storage. The maximum relative cell viabilities were observed when cells were freeze dried and stored at −20 °C, which is optimum temperature for the preservation of E. faecium. At all storage temperatures, trehalose was found to be retaining the highest relative cell viability than other cryoprotectants. In addition, alginate–chitosan capsules were produced to encapsulate E. faecium with the aim of enhancing survival of probiotic cells and keeping the probiotic during exposure to the harsh gastro-intestinal conditions. Encapsulation of probiotic into alginate–chitosan capsules found to be retaining higher survival of probiotic cells (4.342 ± 0.26 Log CFU mL⁻¹) at −20 °C for six months. Microencapsulated cells were resistant to simulated gastric (pH 2.0) and intestinal fluids (pH 7.5), resulting in significantly enhanced survival when compared with free cells. During in vivo treatment, capsules were broken and probiotic cells were directly released into the intestinal tract of rat. This result showed that microencapsulation of E. faecium MC13 with alginate and a chitosan coating offers an effective means of delivery of viable cells to the colon and maintains their survival during the adverse gastro-intestinal conditions.     

Polydimethylsiloxane modified chitosan. Part III: Preparation and characterization of hybrid membranes

The paper deals with the synthesis of organic–inorganic hybrid membranes, Hy, obtained by simultaneous grafting and crosslinking of chitosan with epoxy-terminated polydimethylsiloxane and γ-glycidoxypropyltrimethoxysilane. Porous membranes, HyP, were also obtained by acid decomposition, at different temperatures (25 and 50 °C), of calcium carbonate porogenic agent trapped inside the material. As proved by electron and atomic force microscopy, the non-porous membrane is a phase segregated material with spherical domains (10–40 μm) of silica core covered by hydrophobic siloxane in a hydrophilic chitosan matrix. The porous membranes showed different morphologies with irregular circular pores of 10–30 μm diameters for the membranes obtained at lower temperature, while the membranes prepared at 50 °C tend to adopt a plan-parallel porosity. The water contact angles of hybrid membranes (78°) and pure chitosan membranes (72°) indicated a lower hydrophilic character of modified chitosan. As a result of the crosslinking and of increased hydrophobicity, the hybrid membranes were characterized by a smaller water swelling degree (about 30%) as compared to pure chitosan membrane (700%). However, the presence of the pores in HyP membranes determined an increase of the water adsorption (maximum swelling degree, about 100%). The hybrid membranes possess a slightly higher thermal stability as compared to chitosan (first initial decomposition temperature, 147 and 175 °C for chitosan and hybrid membranes, respectively), but a lower one as compared to pure polydimethylsiloxane. The high storage modulus of chitosan (about 5.1 × 10⁹ Pa at 20 °C) is decreased by about one order of magnitude by the introduction of the highly flexible polysiloxane and the hybrid membranes are more flexible.     

Application of chitosan beads immobilized Rhodococcus sp. NCIM 2891 cholesterol oxidase for cholestenone production

The cell-bound cholesterol oxidase from the Rhodococcus sp. NCIM 2891 was purified three fold by diethylaminoethyl–sepharose chromatography. The estimated molecular mass (SDS-PAGE) and K_m of the enzyme were ∼55.0 kDa and 151 μM, respectively. The purified cholesterol oxidase was immobilized on chitosan beads by glutaraldehyde cross-linking reaction and immobilization was confirmed by Fourier transform infrared spectroscopy, scanning electron microscopy and energy dispersive X-ray analysis. The optimum temperature (45 °C, 5 min) for activity of the enzyme was increased by 5 °C after immobilization. Both the free and immobilized cholesterol oxidases were found to be stable in many organic solvents except for acetone. Fe²⁺ and Pb²⁺ at 0.1 mM of each acted as inhibitors, while Ag⁺, Ca²⁺, Ni²⁺ and Zn²⁺ activated the enzyme at similar concentration. The biotransformation of cholesterol (3.75 mM) with the cholesterol oxidase immobilized beads (3.50 U) leads to ∼88% millimolar yield of cholestenone in a reaction time of 9 h at 25 °C. The immobilized enzyme retains ∼67% activity even after 12 successive batches of operation. The biotransformation method thus, shows a great promise for the production of pharmaceutically important cholestenone.     

Chitosan topical gel formulation in the management of burn wounds

Wound healing properties of chitosan with different molecular weight and degree of deacetylation ranges have been examined. The macroscopic image and histopathology were examined using chitosan, Fucidin^® ointment and to blank. The rate of contraction was evaluated by determination of the unclosed area as a function of time. The treated wounds were found to contract at the highest rate with high molecular weight–high degree of deacetylation chitosan-treated rats as compared to untreated, treated, and Fucidin^® ointment-treated rats. Wounds treated with high molecular weight chitosan had significantly more epithelial tissue (p < 0.05) than wounds with any other treatment and the best re-epithelization and fastest wounds closure were found with the high molecular weight chitosan treatment group. Histological examination and collagenase activity studies revealed advanced granulation tissue formation and epithelialization in wounds treated with high molecular weight chitosan (p < 0.05). High molecular weight with high degree of deacetylation chitosan samples therefore demonstrates potential for use as a treatment system for dermal burns.     

Immunotherapeutic effects of chitin in comparison with chitosan against Leishmania major infection

Chitin and chitosan microparticles (MPs) are important immune system stimulators. The aim of this study was to evaluate the protective effects of these compounds in comparison with each other against Leishmania infection in BALB/c mice infected with Leishmania major (L. major).Female BALB/c mice were injected subcutaneously with 2 × 10⁵ promastigotes. Chitin and/or chitosan MPs (< 40 μm) were subcutaneously injected in the BALB/c mice with two-day intervals until two weeks. Mice in all groups were sacrificed at 12 weeks post-infection. Enumeration of viable parasites was performed using limiting dilution assay. Furthermore, the animals (5 mice/group) were sacrificed two weeks post-infection. The lymph node cells were isolated and the effects of the chitinous MPs on the proliferation and production of cytokines such as tumor necrosis factor alpha (TNF-α) and interleukin-10 (IL-10) were determined. The mean sizes of lesions were significantly smaller in chitin (0.6 ± 0.12 mm) and chitosan treated groups (1.2 ± 0.8 mm) than in the control group (6.2 ± 1.7 mm) (P < 0.05). The parasite load in the lymph nodes of the treated mice was significantly lower than that in the lymph nodes of controls (1.31 × 10⁶ vs 8.24 × 10⁷ parasite/lymph node [P = 0.032] and 7.49 × 10⁶ vs 8.24 × 10⁷ parasite/lymph node [P = 0.05] for chitin and chitosan MPs treatment, respectively). We found that chitinous MPs induced cell proliferation and that chitin but not chitosan increased TNF-α and IL-10 production. Chitin appears that it has more effect than chitosan against leishmaniasis. The current study revealed that chitinous MPs had significant activity against L. major and could be considered as new therapeutic modality in leishmaniasis.     

Chitin and chitosan preparation from shrimp shells using optimized enzymatic deproteinization

Different crude microbial proteases were applied for chitin extraction from shrimp shells. A Box–Behnken design with three variables and three levels was applied in order to approach the prediction of optimal enzyme/substrate ratio, temperature and incubation time on the deproteinization degree with Bacillus mojavensis A21 crude protease. These optimal conditions were: an enzyme/substrate ratio of 7.75 U/mg, a temperature of 60 °C and an incubation time of 6 h allowing to predict 94 ± 4% deproteinization. Experimentally, in these optimized conditions, a deproteinization degree of 88 ± 5% was obtained in good agreement with the prediction and larger than values generally given in literature. The deproteinized shells were then demineralized to obtain chitin which was converted to chitosan by deacetylation and its antibacterial activity against different bacteria was investigated. Results showed that chitosan dissolved at 50 mg/ml markedly inhibited the growth of most Gram-negative and Gram-positive bacteria tested.     

Fluorine-18 labeled galactosylated chitosan for asialoglycoprotein-receptor-mediated hepatocyte imaging

Galactosylated chitosan (GC) was prepared by reacting lactobionic acid with water-soluble chitosan. GC was labeled with fluorine-18 by conjugation with N-succinimidyl-4-¹⁸F-fluorobenzoate ([¹⁸F]SFB) under a slightly basic condition. After rapid purification with HiTrap desalting column, [¹⁸F]FB-GC was obtained with high radiochemical purity (>97%) determined by radio-HPLC. The total reaction time for [¹⁸F]FB-GC was about 150 min. Typical decay-corrected radiochemical yield was about 4–8%. Ex vivo biodistribution in normal mice showed that [¹⁸F]FB-GC had moderate activity accumulation in liver with very good retention (11.13 ± 1.63, 10.97 ± 1.90 and 10.77 ± 0.95% ID/g at 10, 60, 120 min after injection, respectively). The other tissues except kidney showed relative low radioactivity accumulation. The high liver/background ratio affords promising biological properties to get clear images. The specific binding of this radiotracer to the ASGP receptor was confirmed by blocking experiment in mice. Compared with the non-blocking group the hepatic uptake of [¹⁸F]FB-GC significantly declined in all selected time points. The better liver retention properties of [¹⁸F]FB-GC than that of albumin based imaging agents may improve imaging quality and simplify pharmacokinetic model of liver function in the future application with PET imaging.     

Nitrate removal and hydraulic performance of organic carbon for use in denitrification beds

Denitrification beds are a cost-effective technology for removing nitrate from point source discharge. To date, field trials and operational beds have primarily used wood media as the carbon source; however, the use of alternative more labile carbon media could provide for increased removal rate, lower installation costs and reduced bed size. While previous laboratory experiments have investigated the potential of alternative carbon sources, these studies were typically of short duration and small scale and did not necessarily provide reliable information for denitrification bed design purposes. To address this issue, we compared nitrate removal, hydraulic and nutrient leaching characteristics of nine different carbon substrates in 0.2 m³ barrels, at 14 and 23.5 °C over a 23-month period. Mean nitrate removal rates for the period 10–23 months were 19.8 and 15 g N m^?3 d^?1 (maize cobs), 7.8 and 10.5 g N m^?3 d^?1 (green waste), 5.8 and 7.8 g N m^?3 d^?1 (wheat straw), 3.0 and 4.9 g N m^?3 d^?1 (softwood), and 3.3 and 4.4 g N m^?3 d^?1 (hardwood) for the 14 and 23.5 °C treatments, respectively. Maize cobs provided a 3–6.5-fold increase in nitrate removal over wood media, without prohibitive decrease in hydraulic conductivity, but had higher rates of nutrient leaching at start-up. Significant difference in removal rate occurred between the 14 and 23.5 °C treatments, with the mean Q₁₀ temperature coefficient = 1.6 for all media types in the period 10–23 months.     

Knee flexor strength and bicep femoris electromyographical activity is lower in previously strained hamstrings

The aim of this study was to determine if athletes with a history of hamstring strain injury display lower levels of surface EMG (sEMG) activity and median power frequency in the previously injured hamstring muscle during maximal voluntary contractions. Recreational athletes were recruited, 13 with a history of unilateral hamstring strain injury and 15 without prior injury. All athletes undertook isokinetic dynamometry testing of the knee flexors and sEMG assessment of the biceps femoris long head (BF) and medial hamstrings (MHs) during concentric and eccentric contractions at ±180 and ±60° s^?1. The knee flexors on the previously injured limb were weaker at all contraction speeds compared to the uninjured limb (+180° s^?1 p = 0.0036; +60° s^?1 p = 0.0013; ?60° s^?1 p = 0.0007; ?180° s^?1 p = 0.0007) whilst sEMG activity was only lower in the BF during eccentric contractions (?60° s^?1 p = 0.0025; ?180° s^?1 p = 0.0003). There were no between limb differences in MH sEMG activity or median power frequency from either BF or MH in the injured group. The uninjured group showed no between limb differences in any of the tested variables. Secondary analysis comparing the between limb difference in the injured and the uninjured groups, confirmed that previously injured hamstrings were mostly weaker (+180° s^?1 p = 0.2208; +60° s^?1 p = 0.0379; ?60° ^?1 p = 0.0312; ?180° s^?1 p = 0.0110) and that deficits in sEMG were confined to the BF during eccentric contractions (?60° s^?1 p = 0.0542; ?180° s^?1 p = 0.0473). Previously injured hamstrings were weaker and BF sEMG activity was lower than the contralateral uninjured hamstring. This has implications for hamstring strain injury prevention and rehabilitation which should consider altered neural function following hamstring strain injury.     

Synergistic effects of essential oil-based cream formulations against Culex quinquefasciatus Say and Aedes aegypti L. (Diptera: Culicidae)

Mosquitoes are major arthropod vectors responsible for several pathogenic diseases. In recent years, repellents of botanical origin, particularly essential oils, have been used against mosquitoes and have been found effective and safe. In this study, five different repellent cream formulations (CF1–5) were prepared using combinations of essential oils, including camphor, cinnamon, citronella, lemongrass, lime, orange, neem, basil, Vitex, Lantana, eucalyptus, and clove, and their repellency was tested using Culex quinquefasciatus Say and Aedes aegypti L. under laboratory conditions and compared to the standard synthetic repellent N,N-diethyl-meta-toluamide (DEET-12%, w/w). Among the five cream formulations, CF2 at a dose of 5 mg/cm² showed the longest protection time of 4.18 h and 3.31 h against C. quinquefasciatus and A. aegypti, respectively, under laboratory conditions. CF3 at a dose of 5 mg/cm² was moderately effective, with protection times of 3.42 h and 2.58 h against C. quinquefasciatus and A. aegypti, respectively, under laboratory conditions. CF2 at a dose of 5 mg/cm² was also tested in the field against wild mosquitoes for 3 h, and 100% protection was observed for the entire study period. Thus, CF2 could be used in developing an effective natural repellent as an alternative to the existing synthetic repellents to C. quinquefasciatus and A. aegypti.