Tip size of ion-exchanger based K+-selective microelectrodes. II. Effects on measurement of evoked [K+]0 transients

Double-barreled ion-exchanger based K+-selective microelectrodes (K+ ISMs) of a variety of tip diameters were used to provide an experimental test of predictions that microelectrode tip induced tissue damage influences the magnitude of measured [K+]0 increases. The measured magnitude of stimulation induced [K+]0 rises in the rat optic nerve depended on the tip diameter of the measuring K+ ISM; smaller tipped K+ ISMs tended to measure larger rises of [K+]0 than bigger tipped K+ ISMs. When stimulated [K+]0 increases were simultaneously recorded with 2 K+ ISMs of different tip size, the smaller tipped K+ ISM recorded [K+]0 increases that were, on average, 14% larger than the increases measured by the bigger tipped K+ ISM. In view of these results, and those presented in the previous paper, investigators should standardize the tip sizes of the ISMs used in their experiments.     

Thirty years of ion-selective microelectrodes: disappointments and successes

The need to know the intracellular activity of an ion and how it changes under controlled conditions is as important today as it was 30 years ago. In 1956, one could fabricate only a H+-selective microelectrode and with a tip size not much smaller than 100 micron. Today, one can fabricate microelectrodes selective to H+, Na+, K+, Cl-, HCO3-, Ca2+, or Mg2+ (plus others) and with active tips less than 1 micron. The reduction of active tip size can be attributed mainly to the introduction of liquid ion exchanger (LIX) and neutral carrier ligands. Unfortunately, the LIX microelectrodes, as currently fabricated, do not yet function optimally as reliable and stable electrochemical measuring devices. A durable bond between the active membrane and its insulated container continues to remain the major design problem even after 30 years of development.     

Symmetry and asymmetry of permeation through toxin-modified Na+ channels.

Single Na+ channels from rat skeletal muscle were inserted into planar lipid bilayers in the presence of either 200 nM batrachotoxin (BTX) or 50 microM veratridine (VT). These toxins, in addition to their ability to shift inactivation of voltage-gated Na+ channels, may be used as probes of ion conduction in these channels. Channels modified by either of the toxins have qualitatively similar selectivity for the alkali cations (Na+ approximately Li+ greater than K+ greater than Rb+ greater than Cs+). Biionic reversal potentials, for example, were concentration independent for all ions studied. Na+/K+ and Na+/Rb+ reversal potentials, however, were dependent on the orientation of the ionic species with respect to the intra- or extracellular face of the channel, whereas Na+/Li+ biionic reversal potentials were not orientation dependent. A simple, four-barrier, three-well, single-ion occupancy model was used to generate current-voltage relationships similar to those observed in symmetrical solutions of Na, K, or Li ions. The barrier profiles for Na and Li ions were symmetric, whereas that for K ions was asymmetric. This suggests the barrier to ion permeation for K ions may be different than that for Na and Li ions. With this model, these hypothetical energy barrier profiles could predict the orientation-dependent reversal potentials observed for Na+/K+ and Na+/Rb+. The energy barrier profiles, however, were not capable of describing biionic Na/Li ion permeation. Together these results support the hypothesis that Na ions have a different rate determining step for ion permeation than that of K and Rb ions.     

Electrochemical properties of Na+- and K+-selective glass microelectrodes.

Electrochemical properties of Na+-selective glass microelectrodes were studied and compared with those of K+-selective glass microelectrodes. The selectivity of Na+-selective glass microelectrodes depended on the ion concentration of test solutions. With aging, resistance of Na+-selective microelectrodes increased and their selectivity for Na over K decreased. Na+-selective microelectrodes potential measured in NaCl solution remained constant with aging, while the potential measured in KCl solution decreased and became more positive. The changes in resistance and potential of Na+-selective microelectrodes may be due to the effects of the less mobile cation, i.e., H+ or K+ on the Na ion exchange in the Na-sensing region. The results indicate that Na+-selective microelectrodes must be used as soon after filling as possible. The selectivity of Na+-selective microelectrodes increased with increase of the sensitive exposed-tip length, whereas their response time became slow due to a large recessed volume, indicating requirement of an optimum exposed-tip length for intracellular applications. The changes in the properties of Na+-selective glass microelectrodes with aging contrasted with those of K+-selective glass microelectrodes in which resistance decreased and K+-selectivity increased. The K+-selective microelectrodes required aging before use for a high selectivity and low resistance. The K+-selective microelectrodes with low resistance after sufficient aging can be used without insulation to measure K+ and Na+ activities in aqueous solutions. The different properties between Na+- and K+-selective microelectrodes are understandable, because hydration of N+-selective glass is much less extensive than that of K+-selective glass.     

Cationic membrane conductances induced by intracellularly elevated cAMP and Ca2+: measurements with ion-selective microelectrodes

Adenosine 3',5'-cyclic monophosphate (cAMP) and CaCl2 were injected by a fast and quantitative pressure injection technique into voltage-clamped, identified Helix neurons. Intracellular elevation of cAMP as well as of Ca2+ activated an inward current (IcAMP and IN). To identify the ionic fluxes during IcAMP and IN changes in [Na+]i, [K+]o, [H+]i, and [Cl-]i were measured with ion-selective microelectrodes (ISMs). Near resting potential, Na+ was the main carrier of IcAMP. K+, and less effectively Ca2+, could substitute for Na+ in carrying IcAMP. H+ and Cl- were excluded as current carriers for IcAMP by means of ISMs. Simultaneous to this action, cAMP decreased a K+ conductance. This decrease was associated with a reduction of the K+ efflux activated by long-lasting depolarizing voltage steps, as directly measured with ISMs located near the external membrane surface. The nearly compensatory increase and decrease of two membrane conductances in the same neuron left the cell input resistance unchanged despite the considerable depolarizing action of intracellularly elevated cAMP. IN was also of nonspecific nature. However, our findings indicate less selectivity for the Ca2+-activated nonspecific channels. Large cations such as choline, TEA, and Tris passed nearly as well as Na+ through the channels. Measurements with ISMs showed that [H+]i and [Cl-]i were unchanged during IN. IN was largest in bursting pacemaker neurons compared with other cells of similar size. It was found to be essential for the burst production in these cells. IcAMP, on the other hand, might be involved in the presynaptic facilitatory action of cAMP, which as yet was attributed solely to a reduction of a K+ conductance.     

Recording of intracellular Ca2+ from smooth muscle cells by sub-micron tip, double-barrelled CA2+-selective microelectrodes

Novel, double-barrelled Ca2+-selective microelectrodes with tip diameters of approximately 0.1 micron were constructed by using Simon's neutral Ca2+ ligand (ETH 1001). Concentric micropipettes were utilized for the first time for Ca2+-selective microelectrodes in which the Ca2+ ligand was incorporated into a protruding inner pipette, surrounded by an outer reference electrode. In addition, they were made from high resistance aluminosilicate glass tubing (Corning Code 1724). These Ca2+-selective electrodes had linear responses from pCa 3 to pCa 7 in the presence of constant [K+]. They provided on-line observation of changes in intracellular [Ca2+] and in the resting membrane potential in single smooth muscle cells isolated from toad stomach. The mean concentration of intracellular Ca2+ in resting cells was 163.6 +/- 20 nM (+/- SEM, n = 16). Doubling the intracellular Ca2+ level by exposure of cells to elevated [K+] was sufficient to cause shortening.     

Ba2+ release from soda glass modifies single maxi K+ channel activity in patch clamp experiments.

Glasses used to fabricate patch pipettes may release components which affect ion channels (Cota, G., and C.M. Armstrong. 1988. Biophys. J. 53:107-109; Furman, R.E., and J.C. Tanaka. 1988. Biophys. J. 53:287-292; Rojas, L., and C. Zuazaga. 1988. Neurosci. Lett. 88:39-44). The gating properties of maxi K+ channels from Necturus gallbladder epithelium depend on whether borosilicate glass (BG) or blue tip hematocrit glass (SG) is used to construct the patch pipettes. The data are consistent with solubilization from SG of a component which exerts voltage-dependent, cytosolic-side specific block, closely resembling "slow block" by Ba2+ ions. Ringer's solution preincubated with SG, but not with BG, blocked inside-out maxi K+ channels when used as bathing solution. Mass spectrometry revealed that Ba2+ is released by the glass from fast and slow-release compartments (SG contains 3% wt/wt BaO), and is the only ion found in the solution at concentrations consistent with the observed channel block. Additionally, SG released O2-, Na+, Ca2+, and Mg2+, all to micromolar concentrations. These elements do not interfere with maxi K+ channels but they could in principle alter the properties of other ion channels. Thus, screening for channel-modifying substances released by the glass may be necessary for the adequate interpretation of patch-clamp results.     

Charge selectivity of the designed uncharged peptide ion channel Ac-(LSSLLSL)3-CONH2.

Charge selectivity in ion channel proteins is not fully understood. We have studied charge selectivity in a simple model system without charged groups, in which an amphiphilic helical peptide, Ac-(Leu-Ser-Ser-Leu-Leu-Ser-Leu)3-CONH2, forms ion channels across an uncharged phospholipid membrane. We find these channels to conduct both K+ and Cl-, with a permeability ratio (based on reversal potentials) that depends on the direction of the KCl concentration gradient across the membrane. The channel shows high selectivity for K+ when [KCl] is lowered on the side of the membrane that is held at a positive potential (the putative C-terminal side), but only modest K+ selectivity when [KCl] is lowered on the opposite side (the putative N-terminal side). Neither a simple Nernst-Planck electrodiffusion model including screening of the helix dipole potential, nor a multi-ion, state transition model allowing simultaneous cation and anion occupancy of the channel can satisfactorily fit the current-voltage curves over the full range of experimental conditions. However, the C-side/N-side dilution asymmetry in reversal potentials can be simulated with either type of model.     

Topology of the P segments in the sodium channel pore revealed by cysteine mutagenesis.

The P segments of the voltage-dependent Na+ channel line the outer mouth and selectivity filter of the pore. The residues that form the cytoplasmic mouth of the pore of the channel have not been identified. To study the structure of the inner pore mouth, the presumed selectivity filter residues (D400, E755, K1237, and A1529), and three amino acids just amino-terminal to each of these residues in the rat skeletal muscle Na+ channel, were mutated to cysteine and expressed in tsA 201 cells. These amino acids are predicted (by analogy to K+ channels) to be on the cytoplasmic side of the putative selectivity filter residues. Inward and outward Na+ currents were measured with the whole-cell configuration of the patch-clamp technique. Cysteinyl side-chain accessibility was gauged by sensitivity to Cd2+ block and by reactivity with methanethiosulfonate (MTS) reagents applied to both the inside and the outside of the cell. Outward currents through the wild-type and all of the mutant channels were unaffected by internal Cd2+ (100 microM). Similarly, 1 mM methanethiosulfonate ethylammonium (MTSEA) applied to the inside of the membrane did not affect wild-type or mutant outward currents. However, two mutants amino-terminal to the selectivity position in domain III (F1236C and T1235C) and one in domain IV (S1528C) were blocked with high affinity by external Cd2+. The Na+ current through F1236C and S1528C channels was inhibited by MTSEA applied to the outside of the cell. The accessibility of these mutants to externally applied cysteinyl ligands indicates that the side chains of the mutated residues face outward rather than inward. The K+ channel model of the P segments as protein loops that span the selectivity region is not applicable to the Na+ channel.     

A glass-membrane pH microelectrode.

By miniaturizing the original MacInnes and Dole glass-membrane pH electrode a new pH microelectrode has been developed. The technique developed utilizes the tip of a high electrical resistance glass pipet that can be sealed with a thin membrane of H⁺-sensitive glass. Single-barreled electrodes have been made with tip diameters ranging from 1.5 to 100 μm and double-barreled electrodes with tip diameters from 2 to 28 μm. The glass-membrane pH microelectrode provided a means for sensing the pH of biological solutions with an electrode having theoretical slope and tip configurational control. The most unique characteristics of the electrode were: the pH sensing surface was quite small, the tip diameter could be controlled, and the problem of electrode insulation was eliminated.     

Potassium and sodium binding to the outer mouth of the K+ channel.

Molecular dynamics simulations of the K+ channel from Streptomyces lividans (KcsA channel) were performed in a membrane-mimetic environment with Na+ and K+ in different initial locations. The structure of the channel remained stable and well preserved for simulations lasting up to 1.5 ns. Salt bridges between Asp80 and Arg89 of neighboring subunits, not detected in the X-ray structure, enhanced the stability of the tetrameric structure. Na+ or K+ ions located in the channel vestibule lost part of their hydration shell and diffused into the channel inner pore in less than a few hundred picoseconds. This powerful catalytic action was caused by strong electrostatic interactions with Asp80 and Glu71. The hydration state of the metal ions turned out to depend significantly on the conformational flexibility of the channel. Furthermore, Na+ entered the channel inner pore bound to more water molecules than K+. The different hydration state of the two ions may be a determinant factor in the ion selectivity of the channel.     

Threonine in the selectivity filter of the acetylcholine receptor channel.

The acetylcholine receptor (AChR) is a cation selective channel whose biophysical properties as well as its molecular composition are fairly well characterized. Previous studies on the rat muscle alpha-subunit indicate that a threonine residue located near the cytoplasmic side of the M2 segment is a determinant of ion flow. We have studied the role of this threonine in ionic selectivity by measuring conductance sequences for monovalent alkali cations and bionic reversal potentials of the wild type (alpha beta gamma delta channel) and two mutant channels in which this threonine was replaced by either valine (alpha T264V) or glycine (alpha T264G). For the wild type channel we found the selectivity sequence Rb greater than Cs greater than K greater than Na. The alpha T264V mutant channel had the sequence Rb greater than K greater than Cs greater than Na. The alpha T264G mutant channel on the other hand had the same selectivity sequence as the wild type, but larger permeability ratios Px/PNa for the larger cations. Conductance concentration curves indicate that the effect of both mutations is to change both the maximum conductance as well as the apparent binding constant of the ions to the channel. A difference in Mg2+ sensitivity between wild-type and mutant channels, which is a consequence of the differences in ion binding, was also found. The present results suggest that alpha T264 form part of the selectivity filter of the AChR channel were large ions are selected according to their dehydrated size.     

Ion conductance and selectivity of single calcium-activated potassium channels in cultured rat muscle

The conductance and selectivity of the Ca-activated K channel in cultured rat muscle was studied. Shifts in the reversal potential of single channel currents when various cations were substituted for Ki+ were used with the Goldman-Hodgkin-Katz equation to calculate relative permeabilities. The selectivity was Tl+ greater than K+ greater than Rb+ greater than NH4+, with permeability ratios of 1.2, 1.0, 0.67, and 0.11. Na+, Li+, and Cs+ were not measurably permeant, with permeabilities less than 0.05 that of K+. Currents with the various ions were typically less than expected on the basis of the permeability ratios, which suggests that the movement of an ion through the channel was not independent of the other ions present. For a fixed activity of Ko+ (77 mM), plots of single channel conductance vs. activity of Ki+ were described by a two-barrier model with a single saturable site. This observation, plus the finding that the permeability ratios of Rb+ and NH+4 to K+ did not change with ion concentration, is consistent with a channel that can contain a maximum of one ion at any time. The empirically determined dissociation constant for the single saturable site was 100 mM, and the maximum calculated conductance for symmetrical solutions of K+ was 640 pS. TEAi+ (tetraethylammonium ion) reduced single channel current amplitude in a voltage-dependent manner. This effect was accounted for by assuming voltage-dependent block by TEA+ (apparent dissociation constant of 60 mM at 0 mV) at a site located 26% of the distance across the membrane potential, starting at the inner side. TEAo+ was much more effective in reducing single channel currents, with an apparent dissociation constant of approximately 0.3 mM.     

A submicrometer glass-membrane pH microelectrode.

The glass-membrane pH microelectrode (GMpHME) described previously (Anal. Biochem.73, 501, 1976) had a limitation in the minimum size (tip diameter) that could be manufactured (about 1 μm). In addition, when made at this small size the electrical resistance was usually high (10¹¹ Ω) and the response time long (greater than 5 min). The inability to manufacture the GMpHME with tip diameters less than 1 μm was primarily due to the thickness of the pH glass used to form the H⁺-sensitive membrane. In this report we detail a method for thinning the pH glass in such a way that the manufacture of submicrometer glass-membrane pH microelectrodes is possible. These submicrometer pH electrodes have rapid response times (1 to 3 min) and maintain the desirable characteristics of all GMpHMEs, that is, near theoretic slope and a well-defined sensing surface area.     

Solid support membranes for ion channel arrays and sensors: application to rapid screening of pharmacological compounds

The use of solid supported membranes (SSM) was investigated for reconstitution of ion channels and for potential application to screen pharmacological reagents affecting ion channel function. The voltage-gated Kv1.5 K+ channel was reconstituted on an SSM and a current was measured. This current was dependent on the presence of K+, but not Na+, indicating that the Kv1.5 K+ channel maintained cation specificity when reconstituted on SSM. Two pharmacological reagents applied to Kv1.5 K+ channels reconstituted on SSM had similar inhibitory effects as those measured using Kv1.5 in biological membranes. SSM-mounted ion channels were stable enough to be washed with buffer solution and reused many times, allowing solution exchange essential for pharmacological drug screening.     

Potassium-selective amphotericin B channels are predominant in vesicles regardless of sidedness.

Amphotericin B (AmB) is a membrane-active antibiotic which has been shown to increase ion and small molecule permeability in a variety of model and biological membrane systems. A major mechanistic model, based on BLM systems, proposes that amphotericin forms barrellike pores with cholesterol which are cation selective when added to one side of the membrane and anion selective when added to both sides. We have tested this hypothesis on small and reverse-phase large unilamellar vesicles (SUV and REV) with and without cholesterol. The method used to measure K+, Cl-, and net ion currents is based on ion/H+ exchange detected by the entrapped pH probe pyranine. We find that AmB forms channels which have net selectivity for K+ over Cl- regardless of sidedness or sterol content in SUV. REV with 10% cholesterol also show net K+ selectivity with double-sided addition. Differences are noted between cholesterol- and non-sterol-containing vesicles consistent with at least two separate modes of action: (1) cholesterol-containing SUV form some larger diameter pores which allow the passage of larger ions especially when added to both sides; (2) SUV without sterol form pores which are still K+ over Cl- selective, but larger ions do not pass. The latter mode of action precludes a sterol/pore type of model but not necessarily a barrellike model consisting only of amphotericin molecules.(ABSTRACT TRUNCATED AT 250 WORDS)     

Two rings of negative charges in the cytosolic vestibule of type-1 ryanodine receptor modulate ion fluxes

The tetrameric ryanodine receptor calcium release channels (RyRs) are cation-selective channels that have pore architecture similar to that of K+ channels. We recently identified, in close proximity to the selectivity filter motif GGGIG, a conserved lumenal DE motif that has a critical role in RyR ion permeation and selectivity. Here, we substituted three aspartate residues (D4938, D4945, D4953) with asparagine and four glutamate residues (E4942, E4948, E4952, E4955) with glutamine hypothesized to line the cytosolic vestibule of the skeletal muscle RyR (RyR1). Mutant single channel properties were determined using the planar lipid bilayer method. Two mutants (D4938N, D4945N) showed a reduced K+ ion conductance, with D4938N also exhibiting a reduced selectivity for Ca2+ compared to K+. The cytosolic location of D4938 and D4945 was confirmed using the polycation neomycin. Both D4938N and D4945N exhibited an attenuated block by neomycin to a greater extent from the cytosolic than lumenal side. By comparison, charge neutralization of lumenal loop residues (D4899Q, E4900N) eliminated the block from the lumenal but not the cytosolic side. The results suggest that, in addition to negatively charged residues on the lumenal side, rings of four negative charges formed by D4938 and D4945 in the cytosolic vestibule determine RyR ion fluxes.     

Neutral carrier Na+- and Ca2+-selective microelectrodes for intracellular application.

Na+- and Ca2+-selective microelectrodes were made with Simon's neutral carrier ETH 227 and ETH 1001, respectively, and their properties were studied for intracellular application. The kNaK (selectivity coefficient for Na+ with respect to K+) values of the Na+-selective microelectrodes were in the range of 0.01-0.02, which is comparable to those of recessed-tip Na+-selective glass microelectrodes. The kNaMg values of the microelectrodes were approximately 0.005 so that the interference by intracellular Mg2+ levels could be negligible. The kNaCa values were approximately 2 and the Na+-selective microelectrodes were more selective to Ca2+ than Na+. This indicates that their intracellular application requires special care to handle Ca2+ interference under certain conditions. The kNaK, kNaMg, and kNaCa values did not depend significantly on the methods used for their determination or on the ion activity levels tested. The Nicolsky equation described well the microelectrode potentials in the mixed solutions of NaCl (1-100 mM) and KCl. Potential and resistance of the microelectrodes were stable for a long period and their response time was fast. The results indicate that the Na+-selective microlectrodes are suitable for measurements of intracellular Na ion activities. Ca2+-selective microelectrode potentials at Ca2+ concentrations lower than 10(-4) M changed significantly for the first 2-3 h and then became fairly stable. The rate of the potential change was dependent on the column length of the Ca2+-selective liquid filled. Potentials of the microelectrodes varied from 10-20 mV for Ca2+ between 10(-7) and 10(-6) M concentrations, which may be the cytosolic free-Ca2+ range. With the Ca2+ concentrations greater than 10(-6) M, the microelectrodes had potential changes of approximately 30 mV or greater for a tenfold change in Ca2+ concentration. The kCaK and kCaNa values were in the ranges of 10(-5)-10(-6) and 10(-4)-10(-5), respectively. The kCaMg values were approximately 10(-7). The results show that the Ca2+-selective microelectrodes can be used for measurements of cytosolic Ca ion activities.     

The predominant role of coordination number in potassium channel selectivity

Potassium channels are exquisitely selective, allowing K+ to pass across cell membranes while blocking other ion types. Here we demonstrate that the number of carbonyl oxygen atoms that surround permeating ions is the most important factor in determining ion selectivity rather than the size of the pore or the strength of the coordinating dipoles. Although the electrostatic properties of the coordinating ligands can lead to Na+ or K+ selectivity at some values of the dipole moment, no significant selectivity arises at the specific value of the dipole moment for carbonyl groups found in potassium channels when the ligands have complete freedom. Rather, we show that the main contribution to selectivity arises from slight constraints on the conformational freedom of the channel protein that limit the number of carbonyl oxygen atoms to a value better suited to K+ than Na+, despite the pore being flexible. This mechanism provides an example of a general framework for explaining ion discrimination in a range of natural and synthetic macromolecules in which selectivity is controlled by the number of coordinating ligands in addition to their dipole moment.     

Ca2+-selective microelectrodes

Ca2+-selective microelectrodes based on the synthetic neutral carrier ETH 1001 can be used for quantitative intracellular measurements of resting Ca2+-activities and of slowly changing Ca2+-levels (response time in the order of seconds). Microelectrodes with tip diameters greater than 0.3 micron show selectivities that yield a detection limit between 10(-8) and 10(-7) M Ca2+ in an intracellular background. The Ca2+-activity is obtained together with electrical parameters of the cell (e.g. cell membrane potential and membrane resistance or conductivity). Simultaneous monitoring of other ion-activities is accessible (double- or multi-barrelled microelectrodes). The Ca2+-determination is extremely local, i.e. it probably does not indicate an averaged cytosolic activity in every situation (e.g. localized transients).