Synergistic effect of calcium stearate and photo treatment on the rate of biodegradation of low density polyethylene spent saline vials

The biodegradation of spent saline bottles, a low density polyethylene product (LDPE) by two selected Arthrobacter sp. under in vitro conditions is reported. Chemical and UV pretreatment play a vital role in enhancing the rate of biodegradation. Treated LDPE film exhibits a higher weight loss and density when compared to untreated films. Arthrobacter oxydans and Arthrobacter globiformis grew better in medium containing pretreated film than in medium containing untreated film. The decrease in density and weight loss of LDPE was also more for pretreated film when compared to untreated film indicating the affect of abiotic treatment on mechanical properties of LDPE. The decrease in the absorbance corresponding to carbonyl groups and double bonds that were generated during pretreatment suggest that some of the double bonds were cut by Arthrobacter species. Since Arthrobacter sp. are capable of degrading urea, splitting of urea group were also seen in FTIR spectrum indicating the evidence of biodegradation after microbial incubation. The results indicated that biodegradation rate could be enhanced by exposing LDPE to calcium stearate (a pro-oxidant) which acts as an initiator for the oxidation of the polymers leading to a decrease of molecular weight and formation of hydrophilic group. Therefore, the initial step for biodegradation of many inert polymers depends on a photo-oxidation of those polymers. The application in sufficient details with improved procedures utilizing recombinant microorganism with polymer degradation capacity can lead to a better plastic waste management in biomedical field. The present plastic disposal trend of waste accumulation can be minimized with this promising eco-friendly technique.     

Long-Term Sorption of Metals Is Similar among Plastic Types: Implications for Plastic Debris in Aquatic Environments

Concerns regarding plastic debris and its ability to accumulate large concentrations of priority pollutants in the aquatic environment led us to quantify relationships between different types of mass-produced plastic and metals in seawater. At three locations in San Diego Bay, we measured the accumulation of nine targeted metals (aluminum, chromium, manganese, iron, cobalt, nickel, zinc, cadmium and lead) sampling at 1, 3, 6, 9 and 12 months, to five plastic types: polyethylene terephthalate (PET), high-density polyethylene (HDPE), polyvinyl chloride (PVC), low-density polyethylene (LDPE), and polypropylene (PP). Accumulation patterns were not consistent over space and time, and in general all types of plastic tended to accumulate similar concentrations of metals. When we did observe significant differences among concentrations of metals at a single sampling period or location in San Diego Bay, we found that HDPE typically accumulated lesser concentrations of metals than the other four polymers. Furthermore, over the 12-month study period, concentrations of all metals increased over time, and chromium, manganese, cobalt, nickel, zinc and lead did not reach saturation on at least one plastic type during the entire 12-month exposure. This suggests that plastic debris may accumulate greater concentrations of metals the longer it remains at sea. Overall, our work shows that a complex mixture of metals, including those listed as priority pollutants by the US EPA (Cd, Ni, Zn and Pb), can be found on plastic debris composed of various plastic types.     

Comparative biodegradation of HDPE and LDPE using an indigenously developed microbial consortium

A variety of bacterial strains were isolated from waste disposal sites of Uttaranchal, India, and some from artificially developed soil beds containing maleic anhydride, glucose, and small pieces of polyethylene. Primary screening of isolates was done based on their ability to utilize high- and low-density polyethylenes (HDPE/LDPE) as a primary carbon source. Thereafter, a consortium was developed using potential strains. Furthermore, a biodegradation assay was carried out in 500-ml flasks containing minimal broth (250 ml) and HDPE/ LDPE at 5 mg/ml concentration. After incubation for two weeks, degraded samples were recovered through filtration and subsequent evaporation. Fourier transform infrared spectroscopy (FTIR) and simultaneous thermogravimetric-differential thermogravimetry-differential thermal analysis TG-DTG-DTA) were used to analyze these samples. Results showed that consortium-treated HDPE (considered to be more inert relative to LDPE) was degraded to a greater extent 22.41% weight loss) in comparison with LDPE (21.70% weight loss), whereas, in the case of untreated samples, weight loss was more for LDPE than HDPE (4.5% and 2.5%, respectively) at 400 degrees . Therefore, this study suggests that polyethylene could be degraded by utilizing microbial consortia in an eco-friendly manner.     

Synergistic growth of Bacillus and Pseudomonas and its degradation potential on pretreated polypropylene

This study investigated biodegradation of physically pretreated polypropylene (PP) by using two different combinations of microorganisms, namely, Bacillus flexus + Pseudomonas azotoformans(B1) and B. flexus + B. subtilis(B2), for a period of 12 months. The growth rate of (B1) was found to be high throughout the study period, and reached a maximum of 1 × 10¹⁴ colony-forming units (CFU)/mL. At the end of the experiment, the polymers become hydrophilic. Carbonyl indices showed that ultraviolet (UV)-treated polymers started degrading faster than the thermally treated PP. The thermogravimetric analysis also revealed that UV-treated PP exposed to the B. flexus + P. azotoformans combination for 1 year exhibited maximum degradation (22.7%). The gravimetric weight loss method showed 1.95% weight loss followed by 1.45% with B. flexus + B. subtilis. The changes in the carbonyl indices of the polymer through Fourier-transform infrared (FTIR) analysis also support the degradation.     

Enhancement of biodegradability of disposable polyethylene in controlled biological soil

Plastics as polyethylene are widely used in packaging and other agricultural applications. They accumulate in the environment at a rate of 25 million tons per year. Thus, the development and use of degradable plastics was proposed as a solution for plastic waste problem. Because of the ever-increasing use of plastic films, nowadays, biodegradability has become a useful characteristic for plastics. Conversely, the introduction of biodegradable plastics has generated a need for methods to evaluate the biodegradation of these polymers in landfills and solid waste treatment systems such as composting or anaerobic digestion treatment plants. The purpose of this study was to investigate the biodegradation of disposable low-density polyethylene bags containing starch (12%), autoxidizable fatty acid ester and catalytic agents in soil. Structurally this work intended to evaluate the capacity of Phanerochaete chrysosporium (ATCC 34541) to enhance polyethylene film biodegradation in soil microcosms. Soil samples inoculated with P. chrysosporium were mixed with LDPE/starch blend films and biological changes of the films and soil were monitored for 6 months. The biodegradation of polyethylene starch blend film has been determined by the physical, chemical and biological properties of the samples such as pH, biomass, CO₂ formation, percentage elongation, relative viscosity and FTIR spectrum.     

Design of a Papain Immobilized Antimicrobial Food Package with Curcumin as a Crosslinker

Contamination of food products by spoilage and pathogenic microorganisms during post process handling is one of the major causes for food spoilage and food borne illnesses. The present green sustainable approach describes the covalent immobilization of papain to LDPE (low density polyethylene), HDPE (high density polyethylene), LLDPE (linear low density polyethylene) and PCL (polycaprolactam) with curcumin as the photocrosslinker. About 50% of curcumin and 82-92% of papain were successfully immobilized on these polymers. After 30 days, the free enzyme retained 87% of its original activity, while the immobilized enzyme retained more than 90% of its activity on these polymers. Papain crosslinked to LLDPE exhibited the best antibiofilm properties against Acinetobacter sp. KC119137.1 and Staphylococcus aureus NCIM 5021 when compared to the other three polymers, because of the highest amount of enzyme immobilized on this surface. Papain acts by damaging the cell membrane. The enzyme is able to reduce the amount of carbohydrate and protein contents in the biofilms formed by these organisms. Meat wrapped with the modified LDPE and stored at 4°C showed 9 log reduction of these organisms at the end of the seventh day when compared to samples wrapped with the bare polymer. This method of crosslinking can be used on polymers with or without functional groups and can be adopted to bind any type of antimicrobial agent.     

Fouling and stability of polymers and composites in marine environment

Effect of biofouling on various polymers and composites such as, Polyurethane (PU), Silicone rubber (SR), Polyester (PET), Glass Fiber Reinforced Polymer (GFRP), Carbon fibre Reinforced Plastic (CFRP) and Syntactic foams (SF) deployed for a period of one year in marine waters at a depth of 1 m was studied. These materials find wide marine applications. SR with lowest surface energy was the least fouled. Maximum barnacle attachment was seen on hard surface (GFRP) and minimum on flexible surface (SR). Attachment of barnacles and polychaetes are positively correlated with surface energy. Fouling load is positively correlated with Surface energy and hardness. The surface energy, hardness and tensile strength reduced while surface roughness considerably increased during this period. Maximum gravimetric weight loss was seen in PET (7.49%) followed by PU (4.25%) and minimum in CFRP (0.45%). Maximum thermogravimetric weight loss was observed in PET (73.5% at 400 °C) followed by PU (71.1%) and least in SR (2.4%). Fourier Transform infrared spectrum revealed that carbonyl/oxidation indices decreased for PET, GFRP, CFRP, and SR indicating biotic degradation. The same index increased for PU indicating abiotic oxidation.     

Charged hydrophilic polymer brushes and their relevance for understanding marine biofouling

The resistance of charged polymers to biofouling was investigated by subjecting cationic (PDMAEMA), anionic (PSPMA), neutral (PHEMA-co-PEG₁₀MA), and zwitterionic (PSBMA) brushes to assays testing protein adsorption; attachment of the marine bacterium Cobetia marina; settlement and adhesion strength of zoospores of the green alga Ulva linza; settlement of barnacle (Balanus amphitrite and B. improvisus) cypris larvae; and field immersion tests. Several results go beyond the expected dependence on direct electrostatic attraction; PSPMA showed good resistance towards attachment of C. marina, low settlement and adhesion of U. linza zoospores, and significantly lower biofouling than on PHEMA-co-PEG₁₀MA or PSBMA after a field test for one week. PDMAEMA showed potential as a contact-active anti-algal coating due to its capacity to damage attached spores. However, after field testing for eight weeks, there were no significant differences in biofouling coverage among the surfaces. While charged polymers are unsuitable as antifouling coatings in the natural environment, they provide valuable insights into fouling processes, and are relevant for studies due to charging of nominally neutral surfaces.     

Cold spray metal embedment: an innovative antifouling technology

The study demonstrates that embedment of copper particles into thermoplastic polymers (polymers) using cold spray technology is an effective deterrent against fouling organisms. Two polymers, high-density polyethylene (HDPE) and nylon were metallised with copper powder using cold spray technology. After 250 days in the field, Cu-embedded HDPE and copper plate controls were completely free of hard foulers compared to Cu-embedded nylon and polymer controls which were heavily fouled with both soft and hard fouling. Antifouling (AF) success is related to the interaction between the properties of the polymers (elastic modulus and hardness) and the cold spray process which affect particle embedment depth, and subsequently, the release of copper ions as determined by analytical techniques. Embedding metal using cold spray equipment is shown to be an effective AF technology for polymers, in particular those that are difficult to treat with standard AF coatings, with efficacy being a function of the interaction between the cold spray metal and the polymer recipient.     

Cold spray metal embedment: an innovative antifouling technology

The study demonstrates that embedment of copper particles into thermoplastic polymers (polymers) using cold spray technology is an effective deterrent against fouling organisms. Two polymers, high-density polyethylene (HDPE) and nylon were metallised with copper powder using cold spray technology. After 250 days in the field, Cu-embedded HDPE and copper plate controls were completely free of hard foulers compared to Cu-embedded nylon and polymer controls which were heavily fouled with both soft and hard fouling. Antifouling (AF) success is related to the interaction between the properties of the polymers (elastic modulus and hardness) and the cold spray process which affect particle embedment depth, and subsequently, the release of copper ions as determined by analytical techniques. Embedding metal using cold spray equipment is shown to be an effective AF technology for polymers, in particular those that are difficult to treat with standard AF coatings, with efficacy being a function of the interaction between the cold spray metal and the polymer recipient.     

Non-destructive approaches for assessing biofouling of household reverse osmosis membranes

Abstract

This study determined economic non-destructive methods to assess biofouling in point of use reverse osmosis (RO) membrane treatment systems. Three parallel household RO membrane units were operated under controlled feed water conditions to promote biofouling, inorganic fouling and a combination of both. Operational and biological parameters were monitored throughout the systems’ lifespan. Membrane autopsies assessed the degree and type of fouling. Statistical models determined statistically relevant parameters for fouling types that were validated with membrane autopsies. Permeate flow rates decreased differently with biofouling vs inorganic fouling. Large increases in permeate conductivity were noted in membranes suffering from biofouling and not in inorganically fouled membranes. The concentration of cell clumps from detached biofilm in the retentate increased in membranes experiencing biofouling and no increase was seen for inorganically fouled membranes. A combination of these methods could be used to conveniently assess the types of fouling experienced by RO systems.     

Biofouling on polymeric heat exchanger surfaces with E. coli and native biofilms

The biofouling affinity of different polymeric surfaces (polypropylene, polysulfone, polyethylene terephthalate, and polyether ether ketone) in comparison to stainless steel (SS) was studied for the model bacterium Escherichia coli K12 DSM 498 and native biofilms originating from Rhine water. The biofilm mass deposited on the polymer surfaces was minimized by several magnitudes compared to SS. The cell count and the accumulated biomass of E. coli on the polymer surfaces showed an opposing linear trend. The promising low biofilm formation on the polymers is attributed to the combination of inherent surface properties (roughness, surface energy and hydrophobicity) when compared to SS. The fouling characteristics of E. coli biofilms show good conformity with the more complex native biofilms investigated. The results can be utilized for the development of new polymer heat exchangers when using untreated river water as coolant or for other processes needing antifouling materials.     

淡水入侵生物沼蛤的污损机制与防污措施研究进展

沼蛤是一种典型的淡水入侵贝类,能够利用其分泌的足丝牢固黏附在多种水下基质表面,引起严重的生物污损问题。沼蛤污损不但影响水生态系统健康,也给水利工程、交通运输、水产养殖等行业带来经济损失,已成为全球水生态系统安全和国民经济重要行业的潜在威胁,相关防污工作亟待开展。欲从根本上解决沼蛤污损问题,一方面需要加强对其基础生物学特性和污损机制的深入解析,另一方面也需要在此基础上研发更加经济、高效、环境友好的防污措施。本文综述了近年来国内外关于沼蛤污损生物学特性、污损机制和防污措施方面的研究进展,尤其是对沼蛤生物污损发生的主要机制如足探测识别、足丝黏附和环境影响等方面进行了总结,也从物理、化学、生物和防污材料等角度阐述了现有的沼蛤污损控制措施并对未来发展方向进行了展望,以期更加深入地理解沼蛤生物污损现象,为揭示其作用机制、制定科学有效的防污措施、维护水生态系统安全提供数据支撑,综述内容对于水下仿生材料研发也具有重要的参考价值。     

Effect of blending lignin biopolymer on the biodegradability of polyolefin plastics

The ability of the lignin-degrading microorganism Phanerochaete chrysosporium to attack polyethylene and polypropylene was investigated using a series of polymer blends containing 10, 20 and 30% lignin obtained from the waste product of pulp and paper industry. In the cultivation medium, lignin peroxidase and Mn(II)peroxidase activities were detected. Degradation was verified by quantitative u.v. spectrophotometric analysis of the cultivation medium and by liberation of CO₂ from the blends. Measurement of the tensile strength after 30-days cultivation showed that the mechanical properties of the polymer blends were decreased during the biodegradation process. The isolation of oligomer fractions by tetrahydrofuran (THF) extraction of biodegraded polymers and their characterization by gel permeation chromatography (GPC), u.v. and Fourier transmission infrared (FTIR) spectroscopy indicates that biotransformation of the lignin component during the cultivation process initiates partial biodegradation of the synthetic polymer matrix.     

Methods for Assessment of Biodegradability of Plastic Films in Soil

Traditional and novel techniques were tested and compared for their usefulness in evaluating biodegrad-ability claims made for newly formulated “degradable” plastic film products. Photosensitized polyethylene (PE), starch-PE, extensively plasticized polyvinyl chloride (PVC), and polypropylene (PP) films were incorporated into aerobic soil. Biodegradation was measured for 3 months under generally favorable conditions. Carbon dioxide evolution, residual weight recovery, and loss of tensile strength measurements were supplemented, for some films, by gas chromatographic measurements of plasticizer loss and gel permeation chromatographic (GPC) measurement of polymer molecular size distribution. Six- and 12-week sunlight exposures of photosensitized PE films resulted in extensive photochemical damage that failed to promote subsequent mineralization in soil. An 8% starch-PE film and the plasticized PVC film evolved significant amounts of CO₂ in biodegradation tests and lost residual weight and tensile strength, but GPC measurements demonstrated that all these changes were confined to the additives and the PE and PVC polymers were not degraded. Carbon dioxide evolution was found to be a useful screening tool for plastic film biodegradation, but for films with additives, polymer biodegradation needs to be confirmed by GPC. Photochemical cross-linking of polymer strands reduces solubility and may interfere with GPC measurements of polymer degradation.     

Characterization of Aeromonas hydrophila strains and their evaluation for biodegradation of night soil

Among 67 psychrotrophic bacterial isolates of Leh, India screened for production of hydrolytic enzymes at 10 °C, four belonging to Aeromonas hydrophila were characterized and evaluated for biodegradation of night soil. All strains produced metalloproteases on a variety of carbon and nitrogen sources. Strains LA1 and LA15 also produced α-amylase and PC5 both α- & β-amylase. No amylase was produced by PN7, however it produced lipase. Casein and glucose induced maximum enzyme activity (protease and amylase) in LA15 and PC5, respectively. In LA1, maximum induction of protease was observed with casein and of amylase with maltose. Corn oil/tributyrin served as the best inducers for protease and lipase production by PN7. A. hydrophila strains were found to be psychrotrophic with optimum growth and enzyme activity at 20 and 37 °C, respectively. Maximum biodegradation of night soil was observed by strain LA1 at 5–20 °C. This revised version was published online in July 2006 with corrections to the Cover Date.     

Potential biocontrol agents for biofouling on artificial structures

The accumulation of biofouling on coastal structures can lead to operational impacts and may harbour problematic organisms, including non-indigenous species. Benthic predators and grazers that can supress biofouling, and which are able to be artificially enhanced, have potential value as augmentative biocontrol agents. The ability of New Zealand native invertebrates to control biofouling on marina pontoons and wharf piles was tested. Caging experiments evaluated the ability of biocontrol to mitigate established biofouling, and to prevent fouling accumulation on defouled surfaces. On pontoons, the gastropods Haliotis iris and Cookia sulcata reduced established biofouling cover by >55% and largely prevented the accumulation of new biofouling over three months. On wharf piles C. sulcata removed 65% of biofouling biomass and reduced its cover by 73%. C. sulcata also had better retention and survival rates than other agents. Augmentative biocontrol has the potential to be an effective method to mitigate biofouling on marine structures.     

Functionalised inherently conducting polymers as low biofouling materials

Diatoms are a major component of microbial biofouling layers that develop on man-made surfaces placed in aquatic environments, resulting in significant economic and environmental impacts. This paper describes surface functionalisation of the inherently conducting polymers (ICPs) polypyrrole (PPy) and polyaniline (PANI) with poly(ethylene glycol) (PEG) and their efficacy as fouling resistant materials. Their ability to resist interactions with the model protein bovine serum albumin (BSA) was tested using a quartz crystal microbalance with dissipation monitoring (QCM-D). The capacity of the ICP-PEG materials to prevent settlement and colonisation of the fouling diatom Amphora coffeaeformis (Cleve) was also assayed. Variations were demonstrated in the dopants used during ICP polymerisation, along with the PEG molecular weight, and the ICP-PEG reaction conditions, all playing a role in guiding the eventual fouling resistant properties of the materials. Optimised ICP-PEG materials resulted in a significant reduction in BSA adsorption, and > 98% reduction in diatom adhesion.     

Colonization and Biodegradation of Photo-Oxidized Low-Density Polyethylene (LDPE) by New Strains of Aspergillus sp. and Lysinibacillus sp.

The primary objective of this study was the isolation of low-density polyethylene (LDPE)-degrading microorganisms. Soil samples were obtained from an aged municipal landfill in Tehran, Iran, and enrichment culture procedures were performed using LDPE films and powder. Screening steps were conducted using linear paraffin, liquid ethylene oligomer, and LDPE powder as the sole source of carbon. Two landfill-source isolates, identified as Lysinibacillus xylanilyticus XDB9 (T) strain S7-10F and Aspergillus niger strain F1-16S, were selected as super strains. Photo-oxidation (25 days under ultraviolet [UV] irradiation) was used as a pretreatment of the LDPE samples without pro-oxidant additives. The PE biodegradation process was performed for 56 days in a liquid mineral medium using UV-irradiated pure LDPE films without pro-oxidant additives in the presence of the bacterial isolate, the fungal isolate, and the mixture of the two isolates. The process was monitored by measuring the fungal biomass, the bacterial growth, and the pH of the medium. During the process, the fungal biomass and the bacterial growth increased, and the pH of the medium decreased, which suggests the utilization of the preoxidized PE by the selected isolates as the sole source of carbon. Carbonyl and double bond indices exhibited the highest amount of decrement and increment, respectively, in the presence of the fungal isolate, and the lowest indices were obtained from the treatment of a mixture of both fungal and bacterial isolates. Fourier transform infrared (FT-IR), x-ray diffraction (XRD), and scanning electron microscopy (SEM) analyses showed that the selected isolates modified and colonized preoxidized pure LDPE films without pro-oxidant additives.     

The role of the copper-binding enzyme – laccase – in the biodegradation of polyethylene by the actinomycete Rhodococcus ruber

Polyethylene is considered one of the most durable plastic polymers. Virtually, non-biodegradable polyethylene accumulates in the environment, thus posing an ecological threat to man and wildlife. We have previously isolated a strain of the actinomycete Rhodococcus ruber (designated C208; EC 1.10.3.2.) capable of utilizing and degrading polyethylene. Here, we report the role of the bacterial copper-binding enzyme, laccase, in the oxidation and degradation of polyethylene by this strain. Copper markedly affected the induction and activity of laccase, resulting in polyethylene degradation. mRNA quantification by RT-PCR, revealed a 13-fold increase in laccase mRNA levels, in copper-treated cultures compared with the untreated control. Addition of copper to C208 cultures containing polyethylene enhanced the biodegradation of polyethylene by 75%, as compared with the non-amended control. Furthermore, when an extracellular isoform of laccase collected from the media of copper-induced cells was incubated with polyethylene, reductions of 20% and 15% were obtained in the Average Molecular Weight (Mw) and Average Molecular Number (Mn) with the polymer, respectively. FTIR analysis of similar polyethylene films incubated with the extracellular laccase exhibited an increase in the carbonyl peak, indicating that enzymatic oxidation by laccase plays a major role in the biodegradation of polyethylene.