利用λRed重组系统敲除伤寒沙门氏菌rfaH基因

目的：利用λRed重组系统敲除伤寒沙门氏菌的rfaH基因。方法：以伤寒沙门氏菌（Salmonella typhi Ty2,S.ty2）基因组为模板扩增得到的同源臂,与两端带有FRT位点的卡那霉素抗性基因片段共同构建同源重组载体;以重组载体为模板扩增打靶片段,将其转化S.ty2;在抗生素压力和λRed重组系统帮助下,打靶片段和菌体基因组发生同源重组,通过卡那抗性筛选得到带有抗性标记的重组菌;转入重组酶表达质粒pCP20以去除抗性标记,得到保留单一FRT位点的突变菌株;通过PCR鉴定重组菌,并经透射电子显微镜分析表型。结果：在S.ty2中敲除了rfaH基因,经PCR扩增和序列测定正确;初步的表型分析表明突变体的鞭毛合成显著减少。结论：获得了S.ty2突变株,为将沙门氏菌进一步减毒成为疫苗表达载体奠定了基础。     

利用λRed重组系统敲除鼠伤寒沙门氏菌sopB基因

利用λRed重组系统敲除鼠伤寒沙门氏菌LT2的(Salmonella enterica serovar typhimurium LT2,S.typhimurium LT2)sopB基因。以pKD4质粒为模板,扩增得到中间带有卡那霉素抗性基因且两端各带有59 bp分别与sopB基因上下游序列同源的同源打靶片段,将其转化至表达Red重组酶的S.typhimurium LT2感受态细胞中;在抗生素压力和λRed重组系统帮助下,同源片段和菌体sopB基因发生同源重组,通过卡那霉素筛选得到带有抗性标记的阳性重组菌;转入重组酶表达质粒pCP20以除去抗性标记,得到保留单一FRT位点的突变菌株;利用PCR技术鉴定重组菌,并通过检测沙门氏菌效应蛋白SopB的分泌以及沙门氏菌感染HeLa细胞后pAKT的激活反应来鉴定sopB基因是否被敲除。构建的ΔsopB突变菌株失去了分泌SopB蛋白的能力,且不能够像野生型菌株那样在感染HeLa细胞的过程中激活pAkt。本研究获得了S.typhimurium LT2的sopB基因缺失突变株,为沙门氏菌感染宿主过程中SopB的功能研究提供工具,同时也为进一步探索其他类型细菌的基因敲除提供了线索。     

Cre-LoxP系统在炭疽芽胞杆菌基因敲除中的应用及eag基因的敲除

将Cre-LoxP系统应用于Bacillus anthracis中并成功敲除eag基因.以B.anthracis基因组为模板扩增得到上下游同源臂,联合两端带有LoxP位点的壮观霉素抗性基因片段构建好同源重组载体,转化B.anthracis AP422,通过一系列筛选得到带有抗性标记的重组菌.然后,通过转入Cre重组酶表达质粒,去除抗性标记,得到eag基因缺失的重组菌,并在DNA水平、RNA水甲和蛋白质水半进行了系统的鉴定.最终建立了Cre-LoxP系统在B.anthracis中的应用方法,并成功敲除eag基因.     

Cre-LoxP系统在炭疽芽胞杆菌基因敲除中的应用及eag基因的敲除

将Cre-LoxP系统应用于Bacillus anthracis中并成功敲除eag基因．以B.anthracis基因组为模板扩增得到上下游同源臂,联合两端带有LoxP位点的壮观霉素抗性基因片段构建好同源重组载体,转化B．anthracis AP422,通过一系列筛选得到带有抗性标记的重组菌．然后,通过转入Cre重组酶表达质粒,去除抗性标记,得到eag基因缺失的重组菌,并在DNA水平、RNA水平和蛋白质水平进行了系统的鉴定．最终建立了Cre-LoxP系统在B．anthracis中的应用方法,并成功敲除eag基因.     

一种基于线性DNA片段同源重组的嗜盐古菌高效基因敲除系统

随着功能基因组学研究的深入发展,基因敲除技术日益成为基因功能研究的重要手段。嗜盐古菌Haloferax volcanii易于培养,是研究古菌基因功能的良好模式菌株。虽然现已开发了多种嗜盐古菌的遗传操作系统,但基因敲除成功率不十分理想。这些遗传操作方法基于pyr E筛选标记,利用携带同源片段的环状质粒与基因组同源片段间的两次同源重组,敲除目的基因。由于基于环状质粒和pyr E筛选标记的经典同源重组敲除方法在二次重组时,普遍存在回复到野生型菌株的可能,导致二次重组子中敲除目的基因的阳性菌株比例较低。为了克服传统同源重组技术的上述缺陷,文章建立了基于线性DNA片段的同源重组技术。该方法通过一次重组在目标基因的下游引入一段上游同源片段和pyr E标记,从而限定二次重组的发生部位只能在两段上游同源片段之间,发生二次重组的重组子理论上都敲除了目标基因。利用该方法,文章成功敲除了嗜盐古菌Haloferax volcanii的xpd2基因,阳性克隆率达65%。这种线性DNA片段重组法为嗜盐古菌的基因敲除提供了一种高效策略,便于嗜盐古菌的基因改造。     

炭疽芽胞杆菌mntA基因缺失突变株的构建及鉴定

目的:通过同源重组的方法敲除炭疽芽胞杆菌减毒AP422株的mntA基因,使菌株进一步减毒,用于构建新的疫苗候选株。方法:利用PCR方法扩增mntA基因上下游同源臂后与温敏质粒连接,构建打靶载体,并转化炭疽芽胞杆菌减毒AP422株;利用抗生素和温度2种选择压力实现同源重组,敲除目标基因mntA,然后利用Cre-LoxP系统去除抗性筛选标记,得到无抗性标记的缺失突变株,并利用PCR和Western印迹等方法对重组菌进行系统鉴定,最后分析突变株的生物学性状。结果:敲除了AP422株的mntA基因,获得了无抗性标记的缺失突变株,突变株的生存竞争能力比原始菌株明显减弱。结论:突变株获得了进一步减毒,可用于构建新的疫苗候选株。     

地衣芽胞杆菌FLP/FRT基因编辑系统的构建及验证

地衣芽胞杆菌有效的基因编辑工具有限,为了拓展和丰富其基因编辑手段,在地衣芽胞杆菌中构建一个抗性标记可重复使用的FLP/FRT基因编辑系统,并通过敲除α-淀粉酶基因amyL、蛋白酶基因aprE及敲入外源透明颤菌血红蛋白基因vgb对该系统进行初步验证。首先以温敏质粒pNZT1为载体分别构建amyL和aprE基因敲除质粒pNZTT-AFKF和pNZTT-EFKF,两个敲除质粒各自包含针对目标基因的同源臂、抗性基因及同向的FRT位点;将敲除质粒转化地衣芽胞杆菌并经过两次同源交换过程实现目标基因的敲除;最后导入一个FLP重组酶表达质粒通过FLP/FRT系统的重组作用介导抗性基因的回收。为进一步验证本系统的实用性及编辑效率,构建了包含透明颤菌血红蛋白编码基因vgb表达盒及基因组丙酮酸甲酸裂解酶编码基因pflB敲除盒的重组质粒pNZTK-PFTF-vgb,并以此进行外源基因vgb在基因组上的定向敲入。结果显示,成功敲除amyL及aprE并回收了抗性标记卡那霉素基因,敲除后淀粉酶活和蛋白酶活分别减少95.3%和80.4%;vgb基因成功整合入基因组pflB位点并回收了抗性标记四环素基因,并利用荧光定量PCR技术检测到vgb的整合表达。文中首次建立了一个适用于地衣芽胞杆菌的、抗性标记可重复使用的FLP/FRT基因编辑系统,并进行了基因敲除及基因敲入验证,为地衣芽胞杆菌遗传改造提供了良好的方法参考。     

Pseudomonas plecoglossicida NyZ12基因无痕敲除方法的建立

旨在建立一种适合环己胺降解菌NyZ12基因无痕敲除的可靠方法。通过overlapping PCR技术将目的基因上下游同源臂融合并克隆到自杀载体pEX18km上,将重组质粒转化到大肠杆菌S17pir中,再通过接合转移到假单胞菌NyZ12菌株内,经pEX18km质粒上sacB基因的反向筛选得到突变株并通过PCR方法和测序鉴定。结果显示,成功构建了假单胞菌NyZ12菌株orf4637的基因突变株(NyZ12Δ4637)。通过自杀载体同源重组可以成功获得敲除的无痕突变株,且突变株基因组上没有任何抗性筛选标记残留,为环己胺降解菌NyZ12基因功能研究提供了可靠的基因敲除技术。     

利用Red重组系统敲除鲍曼不动杆菌asa A基因

目的利用Red重组系统敲除鲍曼不动杆菌ATCC 17978的asaA。方法设计上下游引物中包含asaA的同源序列,并以pKD4质粒为模板,扩增含有卡那霉素抗性基因的DNA片段。将该片段转化于表达重组酶的17978感受态细胞中,在卡那霉素筛选压力下,得到经两次同源双交换的具有卡那霉素基因标记的突变菌株。随后,在重组酶的作用下将抗性基因去除,最终得到无抗性基因标记的突变菌株ΔasaA。结果通过该重组系统,首先将卡那霉素抗性基因的DNA片段替换了基因组中asaA的DNA片段,然后将卡那霉素抗性基因的DNA片段消除,最终获得了asaA缺失的突变体。结论通过Red重组系统为鲍曼不动杆菌中其他基因的缺失突变提供方法与思路。     

λRed重组系统用于沙门菌质粒毒力基因spvC敲除株的构建

[目的]利用λRed重组系统敲除沙门菌质粒毒力基因spvC。[方法]首先以质粒p KD4为模板,扩增得到两侧含spvC同源臂、中间为卡那霉素抗性基因的线性DNA片段。再将此线性片段电转入具重组功能的感受态沙门菌菌株,发生重组后,卡那霉素平板筛选阳性转化子。最后利用表达FLP重组酶的质粒p CP20,将FRT位点之间的卡那霉素抗性基因消除,用PCR鉴定。Western Blot检测野生沙门菌和spvC敲除株感染的He La细胞ERK磷酸化水平。[结果]沙门菌质粒毒力基因spvC敲除株构建成功,spvC敲除株感染的He La细胞内ERK磷酸化水平升高。[结论]成功构建沙门菌质粒毒力基因spvC敲除株,验证了spvC基因的功能。     

一步法快速构建多片段连接的同源臂载体

目的：建立一种简便、高效,可一步完成多个片段连接,从而构建含同源臂的载体的方法。方法：按照酶切后可产生前后片段相匹配的粘性末端接头的原则设计PCR引物,在目的片段两端均引入BsaⅠ酶切位点。以G160基因为例,PCR扩增打靶用左右同源臂片段、示踪基因CMV-EGFP片段、载体骨架pMD19－T等4个片段,纯化后一起加入一个反应管中,并加入BsaⅠ限制性内切酶和T7DNA连接酶及相应缓冲液,进行酶切、酶连接共10～50个循环反应,一步构建含同源臂载体的质粒;产物经高温处理后,直接转化感受态细胞,并进行重组子PCR鉴定;对pMD19－T载体进行优化,突变载体上的BsaⅠ酶切位点,把示踪基因CMV-EGFP片段引入pHSG298－T载体,再选择不同的G160基因同源臂片段组合对构建系统进行验证。结果：重组质粒酶切和PCR结果表明,应用一步法可成功连接多个片段来构建含同源臂及示踪基因的克隆载体;用优化后的pMD19－T－O载体体系,在2d内即完成了6种各含4个片段的载体的构建。结论：多个基因片段一步无缝连接的方法简便、易行、可靠,不仅可快速构建某类载体系统,还可对基因进行精确的点突变,该系统可用于快速构建基因打靶载体。     

利用Red重组系统快速构建基因打靶载体

基因敲除小鼠模型是在哺乳动物体内研究基因功能最可靠的方法之一。利用常规的分子克隆的方法构建基因打靶载体往往工作周期长,对于难度特别大的基因有时甚至无法完成打靶载体的构建。通过合理应用Red重组系统和低拷贝中间载体,利用50bp的同源重组序列直接从BAC载体中克隆了长片段的小鼠基因组序列;将得到的基因组序列再次通过重组和改造,构建了Gpr56等基因的完全敲除并带有报告基因的打靶载体,实现了打靶载体的快速构建。     

产SEB金黄色葡萄球菌α-溶血毒素基因缺失菌株的构建

构建产肠毒素B(Staphylococcal enterotoxin B ,SEB)的金黄色葡萄球菌α-溶血毒素（α-hemolysin, α-HL)缺失菌株。首先构建用于α-HL基因敲除的同源重组质粒pMHL-α,经金黄色葡萄球菌RN4220修饰后再通过原生质体转入金黄色葡萄球菌SM-01。含重组质粒pMHL-α的金黄色葡萄球菌SM-01在42℃诱导条件下培养多代,最终筛选出α-溶血毒素基因缺失菌株。经序列分析和血平板溶血实验结果证明最终获得产SEB金黄色葡萄球菌α-HL缺失菌株。为野生型金黄色葡萄球菌的体内遗传操作及构建产超抗原药物金黄色葡萄球菌基因工程菌株提供了一定的理论基础和方法。     

Development of a highly efficient gene targeting system for Fusarium graminearum using the disruption of a polyketide synthase gene as a visible marker

We cloned a polyketide synthase gene (pks12) from Fusarium graminearum, a devastating fungal pathogen of cereals. Transformation-mediated gene disruption led to an easily detectable albino phenotype of the disruptants. We used the disruption of the pks12 gene as a visible marker for transformation-mediated homologous recombination and optimized the transformation procedure to achieve a high rate of homologous recombination. In combination with the published genomic sequence data and the generation of expressed sequence tags (ESTs) for F. graminearum, this is a useful tool to investigate this important plant pathogen on a molecular level. Optimized transformation of F. graminearum resulted in at least 93% homologous recombination events when the homologous genomic DNA fragment in the vector had a size of approximately 800bp and was linearized in the middle. Using a genomic sequence of approximately 500bp in the transformation vector, 70% of the transformants still exhibited homologous recombination. On the contrary, no more than 10% homologous recombination events were observed when less than 400bp DNA fragments were used. We co-transformed F. graminearum with two different vectors. One vector harboured a DNA insert homologous to the pks12 gene, while the other vector consisted of the same vector backbone carrying the selection marker specific for F. graminearum. About 70% of the transformants had a disrupted pks12 gene, and all of these showed an integration of the second vector into the pks disruption vector. Therefore, the time-consuming construction of a single transformation vector can be avoided; furthermore, it is now easily feasible to express a gene construct at a defined and mutated genomic site.     

Gene replacement and expression of foreign DNA in mycobacteria.

A system that permits molecular genetic manipulation of mycobacteria was developed on the basis of the yeast paradigm of gene replacement by homologous recombination. A shuttle vector that can replicate autonomously at a high copy number in Escherichia coli but must integrate into homologous DNA for survival in Mycobacterium smegmatis was constructed. The vector contains a ColE1 origin of replication, antibiotic resistance markers for ampicillin and kanamycin, a nutritional marker (pyrF) that allows both positive and negative selection in E. coli and M. smegmatis, and unique restriction sites that permit insertion of foreign DNA. Transformation of mycobacteria with this vector results in integration of its DNA into the genomic pyrF locus by either a single or a double homologous recombination event. With this system, the 65-kilodalton Mycobacterium leprae stress protein antigen was inserted into the M. smegmatis genome and expressed. This gene replacement technology, together with a uniquely useful pyrF marker, should be valuable for investigating mycobacterial pathobiology, for the development of candidate mycobacterial vaccine vehicles, and as a model for the development of molecular genetic systems in other pathogenic microorganisms.     

用同源重组法修饰含人α类珠蛋白基因簇的细菌人工染色体

采用RecA蛋白介导的同源重组的方法,对本实验室筛选出的包含完整人α-类珠蛋白基因簇的细菌人工染色体（BAC）DNA进行删除修饰。首先采用PCR的方法,分别在预删除的HS-40增强子区域的上游和下游克隆长度约为500bp的两段同源序列,并一起克隆到构建载体pBV的XbaI和HindIII位点上,SalI酶切后回收1kb左右的片段并克隆到温度敏感的穿梭质粒pSV-RecA中,转化带有人α-类珠蛋白基因簇的BACDNA的感受态大肠杆菌DH10B,经氯霉素正筛选和镰孢菌酸的负筛选,获得发生两次同源重组后只含BACDNA而穿梭载体已丢失的菌株,经Southern杂交鉴定,获得了HS-40被定位删除的BAC突变体克隆。表明同源重组的方法可以对含有较多重复序列的BACDNA进行准确的删除修饰。 Abstract：By RecA protein mediated homologous recombination method, we successfully delet ed the HS-40 fragment from a bacterial artificial chromosome containing complete human α-globin gene cluster screened by our lab. Two mutant boxes(A and B) fra gments located at the two terminals of HS-40 were cloned into the XbaⅠ and HindIII sites of pBV building vector, then the 1.1kb A+B fragment was recove red from the building vector and inserted into the SalⅠ site of the shuttle vector pSV-RecA, competent DH10B E. Coli containing BAC DNA was tranformed by t he shuttle vector,after chloramphenicol positive selection and fusatic acid neg ative selection,two times of homologous recombination happened and the HS-40 fra gment was successfully deleted from the BAC DNA which is characterized by Southe rn blot,suggested that this method could modified BAC DNA accurately containing high percentage of repeat sequence.     

Characterization of in vivo recombination activities in the mouse embryo

Homologous recombination makes use of sequence homology to repair DNA and to rearrange genetic material. In mammals, these processes have mainly been characterized using cultured cell systems. We have developed an assay that allows us to quantitatively analyze homologous recombination in vivo in the mouse embryo. Transgenic mouse lines were generated by microinjection into a fertilized mouse ovum of a vector containing two homologous LINE-1 (L1) sequences arranged as a direct repeat: these sequences can recombine with each other and with endogenous L1 sequences before, during or after integration of the vector into the genome. Using a plasmid rescue procedure, we determined the composition of the integrated vector array in several transgenic mice and their descendants. Homologous recombination frequencies were found to be strikingly high, involving 70% of integrated vectors in some arrays, with homologous deletions being five times more frequent than gene conversion without crossing-over. Interestingly, non-homologous recombination was found to be much less frequent. We also found that endogenous L1 sequences could be involved in homologous recombination events in the mouse embryo, and that the integrated arrays could be modified from generation to generation by homologous recombination between the integrated L1 sequences.     

Myostatin基因打靶载体的构建及猪胎儿成纤维细胞Myostatin基因的敲除

目的:用缺口修复等技术构建Myostatin(肌肉生长抑制素,MSTN)基因打靶载体,并对大白猪胎儿成纤维体细胞进行转染,获得基因敲除细胞。方法与结果:首先构建用于MSTN基因同源长臂(LA)的抓捕载体,然后在大肠杆菌内利用Red同源重组系统介导的缺口修复,从含大白猪MSTN基因座的细菌人工染色体上亚克隆9.9 kb的LA到抓捕载体上,经过部分序列测定,同源性为100%;通过PCR获得1.4 kb的同源短臂(SA);将LA和SA连入载体pLOXP,构建含有neo和tk正负筛选标记基因的MSTN基因打靶载体pLOXP-MSTN-KO;将线性化的pLOXP-MSTN-KO通过电转染整合到大白猪胎儿成纤维细胞基因组中,利用G418和丙氧鸟苷进行药物筛选,获得抗性细胞克隆890个,通过PCR和DNA测序鉴定获得基因敲除的细胞克隆4个。结论:构建了有效的MSTN基因打靶载体,通过转染获得基因敲除细胞,为利用体细胞核移植制备MSTN基因敲除猪奠定了基础。