重组人Fab金属螯合层析法纯化条件的研究

在重组人Fab(rh Fab)表达载体的羧基端插入六个组氨酸, 使其对金属螯合层析介质产生特异性吸附, 可用金属螯合亲和层析法进行分离纯化. 采用自制金属(铜、锌金属离子)螯合层析介质, 以pH和咪唑两种洗脱方法,对rh Fab段的纯化效果进行了探讨. 结果显示: 铜离子螯合层析介质比锌离子螯合层析介质对rh Fab的亲和能力更强; pH洗脱方法的重复性优于咪唑法; 金属铜离子螯合层析法对rh Fab进行一步纯化可得到纯度大于95%的rh Fab产品.     

Role of the active-site cysteine of Pseudomonas aeruginosa azurin. Crystal structure analysis of the CuII(Cys112Asp) protein

Replacement of the cysteine at position 112 of Pseudomonas aeruginosa azurin with an aspartic acid residue results in a mutant (Cys112Asp) protein that retains a strong copper-binding site. Cu^II(Cys112Asp) azurin can be reduced by excess [Ru^II(NH₃)₆]²⁺, resulting in a Cu^I protein with an electronic absorption spectrum very similar to that of wild-type Cu^I azurin. Cys112Asp azurin exhibits reversible interprotein electron-transfer reactivity with P. aeruginosa cytochrome c ₅₅₁ (μ?=?0.1?M sodium phosphate (pH?7.0);E°(Cu^II/I)?=?180 mV vs NHE); this redox activity indicates that electrons can still enter and exit the protein through the partially solvent-exposed imidazole ring of His117. The structure of Cu^II(Cys112Asp) azurin at 2.4-Å resolution shows that the active-site copper is five coordinate: the pseudo-square base of the distorted square-pyramidal structure is defined by the imidazole N^δ atoms of His46 and His117 and the oxygen atoms of an asymmetrically-bound bidentate carboxylate group of Asp112; the apical position is occupied by the oxygen atom of the backbone carbonyl group of Gly45. The Cu^II–Asp112 interaction is distinguished by an approximately 1.2-Å displacement of the metal center from the plane defined by the Asp112 carboxylate group.     

Separation of hexahistidine fusion proteins with immobilized metal ion affinity chromatographic (IMAC) sorbents derived from MN+‐tacn and its derivatives

The capabilities of a new class of immobilized (im) metal ion chelate complexes (IMCCs), derived from 1,4,7‐triazacyclononane (tacn), bis(1,4,7‐triazacyclononyl) ethane (dtne) and bis(1,4,7‐triazacyclononyl)propane (dtnp) complexed with the borderline metal ions Cu²⁺, Ni²⁺, Zn²⁺, Mn²⁺, Co²⁺, and Cr³⁺, for the purification of proteins have been investigated. In particular, the binding behavior of a model protein, the C‐terminal hexahistidine tagged recombinant fusion protein Schistosoma japonicum glutathione S‐transferase‐Saccharomyces cerevisiae mitochondrial ATP synthase δ‐subunit (GST‐δATPase‐His₆), with these new immobilized metal ion affinity chromatographic (IMAC) sorbents was compared to the properties of a conventional sorbent, derived from immobilized Ni(II)‐nitrilotriacetic acid (im‐Ni²⁺‐NTA). Investigations using the recombinant GST‐δATPase‐His₆ and recombinant S. japonicum glutathione S‐transferase (GST) lacking a hexahistidine tag have confirmed that the C‐terminal tag hexahistidine residues were required for the binding process to occur with these IMAC systems. The results also confirm that recombinant fusion proteins such as GST‐δATPase‐His₆ can be isolated in high purity with these IMAC systems. Moreover, these new macrocyclic systems manifest different selectivity features as a function of pH or ionic strength when compared to the conventional, unconstrained iminodiacetic acid (IDA) or NTA chelating ligands, complexed with borderline metal ions such as Cu²⁺ or Ni²⁺, as IMAC systems. Biotechnol. Bioeng. 2009;103: 747–756. © 2009 Wiley Periodicals, Inc.     

Evaluation of immobilized metal affinity chromatography for purification of penicillin acylase

The aim of this work was to test immobilized metal affinity chromatography (IMAC) for the purification of penicillin acylase. After evaluation of different metals, Cu²⁺ was selected. Different samples were tested: pure penicillin acylase, industrial clarified feedstock and crude extract. After comparing two eluents, NH₄Cl and imidazole, it appeared that although both gave good results for recovery and activity, NH₄Cl was a more selective eluent with a higher fold purification than imidazole (4.64 versus 2.04). Moreover, we shown that a multistep gradient of NH₄Cl, greatly increased the degree of purification (12.36) compared with the one-step process as control (4.64). In addition, good recovery was obtained (97–100%).     

Resolution of three forms of superoxide dismutase by immobilised metal affinity chromatography

A new method for separation of three forms of superoxide dismutase (SOD) using immobilised metal affinity chromatography (IMAC) is reported. Fe-, Mn- and Cu/Zn-SODs were eluted sequentially from Cu²⁺-IMAC column with an increasing gradient of a counter ion (NH⁺₄) run in combination with an increasing pH gradient (6.8–7.8). The combined gradient elution method resulted in separation of SODs with high resolution, the three proteins being eluted in electrophoretically homogeneous forms. Similar preparation could not be achieved by either increasing gradient of a counter ion or decreasing pH gradients used separately. The described methodology has been successfully applied for separation of three SODs from a protozoan parasite, indicating that this combined gradient elution system for IMAC offers new possibilities for the high-resolution separation of proteins exhibiting only minor differences in their amino acid composition and structure.     

Protein selectivity in immobilized metal affinity chromatography based on the surface accessibility of aspartic and glutamic acid residues

The interaction of different species variants of cytochrome c and myoglobin, as well as hen egg white lysozyme, with the hard Lewis metal ions Al³⁺, Ca²⁺, Fe³⁺, and Yb³⁺ and the borderline metal ion Cu²⁺, immobilized to iminodiacetic acid (IDA)-Sepharose CL-4B, has been investigated over the rangepH 5.5–8.0. With appropriately chosen buffer and metal ion conditions, these proteins can be bound to the immobilized M ⁿ +-IDA adsorbents via negatively charged amino acid residues accessible on the protein surface. For example, tuna heart cytochrome c, which lacks surface-accessible histidine residues, readily bound to the Fe³⁺-IDA adsorbent, while the other proteins also showed affinity toward immobilized Fe³⁺-IDA adsorbents when buffers containing 30 mM of imidazole were used. These studies document that protein selectivity can be achieved with hard-metalion immobilized metal ion affinity chromatography (IMAC) systems through the interaction of surfaceexposed aspartic and glutamic acid residues on the protein with the immobilized M ⁿ +-IDA complex. These investigations have also documented that the so-called soft or borderline immobilized metal ions such as the Cu²⁺-IDA adsorbent can also interact with surface-accessible aspartic and glutamic acid residues in a protein-dependent manner. A relationship is evident between the number and extent of clustering of the surfaceaccessible aspartic and glutamic acid residues and protein selectivity with these IMAC systems. The use of elution buffers which contain organic compound modifiers which replicate the carboxyl group moieties of these amino acids on the surface of proteins is also described.Abbreviations IDA iminodiacetic acid - IDA-Mⁿ⁺ iminodiacetic acid chelated to metal ion - IMAC immobilized metal affinity chromatography - DHCC dog heart cytochrome c - HHCC horse heart cytochrome c, THCC, tuna heart cytochrome c - HMYO horse skeletal muscle myoglobin - SMYO sheep skeletal muscle myoglobin - HEWL hen egg white lysozyme     

Use of Streamline chelating for capture and purification of poly-His-tagged recombinant proteins

Expression of recombinant proteins with poly-histidine tags enables their convenient capture and purification using immobilized metal affinity chromatography (IMAC). The 6×His-tagged protein binds to a chelating resin charged with metal ions such as Ni²⁺, Cu²⁺ or Zn²⁺, and can therefore be separated from proteins which have lower, or no, affinity for the resin. Two recombinant proteins, a malaria transmission-blocking vaccine candidate secreted extracellularly by S. cerevisiae and a modified diphtheria toxin produced intracellularly by E. coli, were expressed with 6×His tags and could therefore be purified using IMAC. In an effort to further simplify the initial capture of these proteins, an expanded bed adsorption technique using a chelating resin (Streamline Chelating) was introduced. It was possible to capture the intracellular diphtheria protein from E. coli directly after cell lysis, without prior centrifugation or filtration. The extracellular malaria vaccine candidate was also directly captured from a high cell density yeast culture. Detailed information on the experimental work performed, and the capture processes developed, is provided.     

Mechanism of oxidation of oxymyoglobin by copper ions: comparison of sperm whale, horse, and pig myoglobins

The influence of Cu²⁺ concentration, pH, and ionic strength of the solution as well as redox-inactive zinc ions on the rate of oxidation of sperm whale, horse, and pig oxymyoglobins (oxy-Mb) by copper ions has been studied. These myoglobins have homologous spatial structures and equal redox potentials but differ in the number of histidines located on the surface of the proteins. It was shown that oxy-Mb can be oxidized in the presence of Cu²⁺ through two distinct pathways depending on which histidine binds the reagent and how stable the complex is. A slow pH-dependent catalytic process is observed in the presence of equimolar Cu²⁺ concentration for sperm whale and horse oxymyoglobins. The curves of pH dependence in both cases are sigmoid with pK _eff corresponding to the ionization. The process is caused by the strong binding of Cu²⁺ to His113 and His116, an analogous His residue being absent in pig Mb. In contrast, rapid oxidation of 10-15% of pig oxy-Mb is observed under the same conditions (fast phase), which is not accompanied by catalysis because the reduced copper is apparently not reoxidized. The complexing of Cu²⁺ with His97 situated near the heme is probably responsible for the fast phase of the reaction. The affinity of His97 for Cu²⁺ must be significantly lower than those of the catalytic His residues since the fast phase does not contribute markedly to the rate of sperm whale and horse oxy-Mb oxidation. Increasing copper concentration does not produce a proportional growth in the oxidation rate of sperm whale and horse oxy-Mbs. Which Cu²⁺ binding sites of Mb make main contributions to the His reaction rate at different Cu²⁺/Mb ratios from 0.25 to 10 is discussed.     

Ab initio model studies of copper binding to peptides containing a His–His sequence: relevance to the β-amyloid peptide of Alzheimer’s disease

Two of the defining hallmarks of Alzheimer’s disease (AD) are deposits of the β-amyloid peptide, Aβ, and the generation of reactive oxygen species, both of which may be due to the Aβ peptide coordinating metal ions. The Cu²⁺ concentrations in cores of senile plaques are significantly elevated in AD patients. Experimental results indicate that Aβ1–42 in particular has a very high affinity for Cu²⁺, and that His13 and His14 are the two most firmly established ligands in the coordination sphere of the copper ion. Quantum chemical calculations using the unrestricted B3LYP hybrid density functional method with the 6–31G(d) basis set were performed for geometries, zero point energies and thermochemistry. The effects of solvation were accommodated using the CPCM method. The enthalpies were calculated with the 6–311+G(2df,2p) basis set. Calculations show that when Cu(H₂O)₄²⁺ combines with the model compound 1 (3-(1H-imidazol-5-yl)-N-[2-(1H-imidazol-5-yl)ethyl] propanamide) in the aqueous phase, the most stable binding site involves the Nπ atoms of His13 and His14 as well as the carbonyl of the intervening backbone amide group. These structures are fairly rigid and the implications for conformational changes to the Aβ backbone are discussed. In solution at pH=7, Cu²⁺ promotes the deprotonation and involvement in the binding of the backbone amide nitrogen in a β-sheet like structure. This geometry does not induce strain in the peptide backbone, making it the most likely representation of that portion of the Cu²⁺–Aβ complex monomer in aqueous solution.     

Molecular dynamics simulations of two tandem octarepeats from the mammalian prion protein: fully Cu2+-bound and metal-free forms

Molecular dynamics simulations have been conducted on a model fragment (Ac-PHGGGWGQPHGGGW-NH₂) of the prion protein octarepeat domain, both in the Cu²⁺-bound and metal-free forms. The copper-bound models are based on the consensus structure of the core Cu²⁺-binding site of an individual octarepeat, relevant to the fully Cu²⁺-occupied prion protein octarepeat region. The model peptides contain Cu²⁺ bound through a His imidazole ring and two deprotonated amide N-atoms in the peptide backbone supplied by the following two Gly residues. Both the copper-bound and metal-free models have been simulated with the OPLS all-atom force field with the GROMACS molecular dynamics package. These simulations, with two tandem copper-binding sites, represent the minimum model necessary to observe potential structuring between the copper-binding sites in the octarepeat region. The GWGQ residues constitute a flexible linker region that predominantly adopts a turn, serving to bring adjacent His residues into close proximity. The consequent formation of stable structures demonstrates that the copper-bound octarepeat region allows the copper-coordinating sites to come into van der Waals contact, packing into particular orientations to further stabilize the bend in the GWGQ linker region.     

Hydrogen-bonding assemblies constructed from metalloligand building blocks and H2O

New hydrogen-bonding assemblies were synthesized from the reaction of a metalloligand, [Cu(2,4-pydca)₂]²⁻ (L^Cu) (2,4-pydca = 2,4-pyridinedicarboxylate), with a Fe^II ion or an imidazole in an aqueous medium and crystallographically characterized. The obtained compounds, [Fe(H₂O)₆][Cu(2,4-pydca)₂] (1) and [Cu(2,4-pydca)(imidazole)₂] · 2H₂O (2), have metalloligand dimer units, [Cu₂(2,4-pydca)₄]⁴⁻ and [Cu₂(2,4-pydca)₂(imidazole)₄], respectively, each of which assembles by π-π (1) and hydrogen-bonding (2) interactions to form 1-D metalloligand arrays. The 1-D metalloligand arrays are linked by rich hydrogen-bonding interactions via H₂O molecules.     

ε-Caprolactam-degradation by Alcaligenes faecalis for bioremediation of wastewater of a nylon-6 production plant

Alcaligenes faecalis G utilized 95–97% of 5–15 g -caprolactam l^–1 in 24–48 h over a pH range of 6–8.5 and at 23–40 °C, without complex nutrient requirement. In the absence of KH₂PO₄ and K₂HPO₄/MgSO₄ in the medium, only 7.6% and 0.2% of 10 g caprolactam l^–1 was utilized, respectively. The chemical oxygen demand (COD) of the wastewater of nylon-6 plant was mainly due to its caprolactam content. A. faecalis G decreased the caprolactam content and COD of the wastewater by 80–90% of the original in spite of the wastewater having higher caprolactam content (3600 mg l^–1) and COD (7700 mg l^–1) than those of any of the previous reports.     

Imidazole derivatives of binuclear copper (II) and nickel (II) complexes incorporating bis(1,4,7-triazacyclononan-1-yl) ligands

A series of new binuclear copper (II) and nickel (II) complexes of the macrocyclic ligands bis(1,4,7-triazacyclononan-1-yl)butane (L^but) and bis(1,4,7-triazacyclononan-1-yl)-m-xylene (L^mx) have been synthesized: [Cu₂L^butBr₄] (1), [Cu₂L^but(imidazole)₂Br₂](ClO₄)₂ (2), [Cu₂L^mx(μ-OH)(imidazole)₂](ClO₄)₃ (3), [Cu₂L^but(imidazole)₄](ClO₄)₄ · H₂O (4), [Cu₂L^mx(imidazole)₄](ClO₄)₄ (5), [Ni₂ L^but(H₂O)₆](ClO₄)₄ · 2H₂O (6), [Ni₂L^but(imidazole)₆](ClO₄)₄ · 2H₂O (7) and [Ni₂L^mx (imidazole)₄(H₂O)₂](ClO₄)₄ · 3H₂O (8). Complexes 1, 2, 7 and 8 have been characterized by single crystal X-ray studies. In each of the complexes, the two tridentate 1,4,7-triazacyclononane rings of the ligand facially coordinate to separate metal centres. The distorted square-pyramidal coordination sphere of the copper (II) centres is completed by bromide anions in the case of 1 and/or monodentate imidazole ligands in complexes 2, 4 and 5. Complex 3 has been formulated as a monohydroxo-bridged complex featuring two terminal imidazole ligands. Complexes 6-8 feature distorted octahedral nickel (II) centres with water and/or monodentate imidazole ligands occupying the remaining coordination sites. Within the crystal structures, the ligands adopt trans conformations, with the two metal binding compartments widely separated, perhaps as a consequence of electrostatic repulsion between the cationic metal centres. The imidazole-bearing complexes may be viewed as simple models for the coordinative interaction of the binuclear complexes of bis (tacn) ligands with protein molecules bearing multiple surface-exposed histidine residues.     

The copper centers of tyramine β-monooxygenase and its catalytic-site methionine variants: an X-ray absorption study

Tyramine β-monooxygenase (TBM) is a member of a family of copper monooxygenases containing two noncoupled copper centers, and includes peptidylglycine monooxygenase and dopamine β-monooxygenase. In its Cu(II) form, TBM is coordinated by two to three His residues and one to two non-His O/N ligands consistent with a [Cu_M(His)₂(OH₂)₂–Cu_H(His)₃(OH₂)] formulation. Reduction to the Cu(I) state causes a change in the X-ray absorption spectroscopy (XAS) spectrum, consistent with a change to a [Cu_M(His)₂S(Met)–Cu_H(His)₃] environment. Lowering the pH to 4.0 results in a large increase in the intensity of the Cu(I)–S extended X-ray absorption fine structure (EXAFS) component, suggesting a tighter Cu–S bond or the coordination of an additional sulfur donor. The XAS spectra of three variants, where the Cu_M Met471 residue had been mutated to His, Cys, and Asp, were examined. Significant differences from the wild-type enzyme are evident in the spectra of the reduced mutants. Although the side chains of His, Cys, and Asp are expected to substitute for Met at the Cu_M site, the data showed identical spectra for all three reduced variants, with no evidence for coordination of residue 471. Rather, the K-edge data suggested a modest decrease in coordination number, whereas the EXAFS indicated an average of two His residues at each Cu(I) center. These data highlight the unique role of the Met residue at the Cu_M center, and pose interesting questions as to why replacement by the cuprophilic thiolate ligand leads to detectable activity whereas replacement by imidazole generates inactive TBM.     

Application of 2,4,5-tris(2-pyridyl)imidazole as ‘turn-off’ fluorescence sensor for Cu(II) and Hg(II) ions and in vitro cell imaging

The 2,4,5-tris(2-pyridyl)imidazole ( L ) molecule has been evaluated as a probe for dual sensing of Hg²⁺ and Cu²⁺ ions in EtOH/HEPES buffer medium (5 mM, pH = 7.34, 1:1, v/v). Probe L shows a good sensitive and selective turn-off response in the presence of both Hg²⁺ and Cu²⁺ ions, which is comprehensible under long UV light. The probe can detect Cu²⁺ ion in the pH range 3–11 and Hg²⁺ ion in pH 6–8. The limit of detection for Cu²⁺ (0.77 μM) is well under the allowable limit prescribed by the United States Environmental Protection Agency. Two metal (Cu²⁺/Hg²⁺) ions are needed per L for complete fluorescence quenching. The probe shows marked reversibility on treatment with Na₂EDTA, making the protocol more economical for practical purposes. Paper strip coated with the L solution of EtOH can detect the presence of Cu²⁺ and Hg²⁺ ions in the sample using visible quenching of the fluorescence intensity. Density functional theory–time-dependent density functional theory (DFT–TDDFT) calculations support experimental observations, and d-orbitals of Cu²⁺/Hg²⁺ provide a nonradiative decay pathway. Cell imaging study using HDF and MDA-MB-231 cells also supported the viability of L in detecting Cu²⁺ and Hg²⁺ ions in living cells.     

Efficient two-step chromatographic purification of penicillin acylase from clarified Escherichia coli ultrasonic homogenate

A two-step chromatographic purification procedure from clarified Escherichia coli ultrasonic homogenate was evaluated. The capture step included immobilized metal affinity chromatography with Cu²⁺ as metal ion. Two elution methods were performed: 1 M NH₄Cl and 0.01 M imidazole. Respectively, we obtained a different purification fold (16.5 to 3.15) and a similar result for the recovery of activity (90–99%). The best elution method was chosen for the procedure. The second step, hydrophobic interaction chromatography, gave a 3.8-fold purification with 77.7% of activity. The total procedure gave a 66-fold purification in relation to the initial crude extract with 70% for the recovery of activity and was performed without any conditioning step and at the same pH value.     

Purification of histidine-tagged mitochondrial ADP/ATP carrier: influence of the conformational states of the C-terminal region

A functional recombinant mitochondrial ADP/ATP carrier from the yeast Saccharomyces cerevisiae that bears a six-histidine tag at the C-terminus, Anc2(His(6))p, has been engineered to allow its purification by immobilized metal-ion affinity chromatography (IMAC). The tagged carrier was expressed at a level similar to that of unmodified Anc2p as determined by immunodetection and titration of the specific atractyloside binding sites. Anc2(His(6))p, enriched by chromatography on hydroxyapatite of detergent extracts of mitochondria, was still contaminated by mitochondrial proteins and a large amount of ergosterol. It was highly purified after adsorption on Ni-NTA resin and elution by imidazole buffer, with a 90-95% overall yield. Anc2(His(6))p interacted differently with immobilized ions depending on whether it was unliganded or bound to carboxyatractyloside (CATR) or bongkrekic acid (BA), two specific inhibitors of the ADP/ATP transport, thus indicating that accessibility of the C-terminus is markedly influenced by the conformational state of the carrier. Fluorometric assays demonstrated that purified unliganded Anc2(His(6))p was in a functional state since it underwent CATR- and BA-sensitive and ADP (or ATP)-induced conformational changes. Large-scale purification of Anc2(His(6))p-CATR and Anc2(His(6))p-BA complexes by IMAC will be of major interest for structural analysis of the ADP/ATP carrier.     

Immobilized palladium(II) ion affinity chromatography for recovery of recombinant proteins with peptide tags containing histidine and cysteine

Fusion of peptide‐based tags to recombinant proteins is currently one of the most used tools for protein production. Also, immobilized metal ion affinity chromatography (IMAC) has a huge application in protein purification, especially in research labs. The combination of expression systems of recombinant tagged proteins with this robust chromatographic system has become an efficient and rapid tool to produce milligram‐range amounts of proteins. IMAC‐Ni(II) columns have become the natural partners of 6xHis‐tagged proteins. The Ni(II) ion is considered as the best compromise of selectivity and affinity for purification of a recombinant His‐tagged protein. The palladium(II) ion is also able to bind to side chains of amino acids and form ternary complexes with iminodiacetic acid and free amino acids and other sulfur‐containing molecules. In this work, we evaluated two different cysteine‐ and histidine‐containing six amino acid tags linked to the N‐terminal group of green fluorescent protein (GFP) and studied the adsorption and elution conditions using novel eluents. Both cysteine‐containing tagged GFPs were able to bind to IMAC‐Pd(II) matrices and eluted successfully using a low concentration of thiourea solution. The IMAC‐Ni(II) system reaches less than 20% recovery of the cysteine‐containing tagged GFP from a crude homogenate of recombinant Escherichia coli, meanwhile the IMAC‐Pd(II) yields a recovery of 45% with a purification factor of 13. Copyright © 2014 John Wiley & Sons, Ltd.     

Copper (II) complex-catalyzed oxidation of NADH by hydrogen peroxide

Among various metal ions of physiological interest, Cu²⁺ is uniquely capable of catalyzing the oxidation of NADH by H₂O₂. This oxidation is stimulated about fivefold in the presence of imidazole. A similar activating effect is found for some imidazole derivatives (1-methyl imidazole, 2-methyl imidazole, andN-acetyl-L-histidine). Some other imidazole-containing compounds (L-histidine,L-histidine methyl ester, andL-carnosine), however, inhibit the Cu²⁺-catalyzed peroxidation of NADH. Other chelating agents such as EDTA andL-alanine are also inhibitory. Stoichiometry for NADH oxidation per mole of H₂O₂ utilized is 1, which excludes the possibility of a two-step oxidation mechanism with a nucleotide free-radical intermediate. About 92% of the NADH oxidation product can be identified as enzymatically active NAD⁺. D₂O, 2,5-dimethylfuran, and 1,4-diazabicyclo [2.2.2]-octane have no significant effect on the oxidation, thus excluding¹O₂ as a mediator. Similarly, OH· is also not a likely intermediate, since the system is not affected by various scavengers of this radical. The results suggest that a copper-hydrogen peroxide intermediate, when complexed with suitable ligands, can generate still another oxygen species much more reactive than its parent compound, H₂O₂.     

Optimization of flow rate,initial metal ion concentration and biomass density for maximum removal of Cu2+ by immobilized Microcystis

The potential of alginate-immobilized Microcystis packed in a column for maximum removal of Cu²⁺ at different flow rates, biomass, and initial metal ion concentration was assessed in a continuous flow system. Although Cu²⁺ removal did occur at all the flow rates tested, it was maximum (54%) at 0.75-ml min⁻¹ flow rate, 30 μg ml⁻¹ initial metal ion concentration and 0.016 g biomass. Cu²⁺ removal was influenced by inlet metal ion concentration and biomass density. An increase in the biomass concentration from 0.016 to 0.128 g resulted in an apparent increase in percentage removal but the Cu²⁺ adsorbed per unit dry wt. declined. When the flow rate (0.75 ml min⁻¹) and biomass density (0.064 g) were kept constant and the inlet metal ion concentration was varied from 10 to 150 μg ml⁻¹, a 68% removal of Cu²⁺ was obtained at 50 μg ml⁻¹ initial concentration in a time duration of 15 min. The metal-laden columns were efficiently desorbed and regenerated following elution with double distilled water (DDW) (pH 2) (89%). This was followed by 1 mm EDTA > 1 mm NTA > 0.1 mm EDTA > 1 mm HCl > 1 mm HNO₃ > 5 mm CaCl₂ > DDW (pH 7.0) > 1 mm NaHCO₃ > 1 mm CaCl₂. Of the total (2.83 mg) adsorbed Cu²⁺, 1.89 mg (67%) was desorbed by DDW (pH 2) within the first 20 min of elution time. Thereafter the desorption rate slowed down and only 22% (0.632 mg) desorption was obtained in the last 20 min. In contrast to water pH 2, the desorption of Cu²⁺ by 1 mm EDTA was very slow, the maximum being 8% after 40 min of elution. This revised version was published online in July 2006 with corrections to the Cover Date.