NaCa0.6V6O16·3H2O as an Ultra‐Stable Cathode for Zn‐Ion Batteries: The Roles of Pre‐Inserted Dual‐Cations and Structural Water in V3O8 Layer

Rechargeable aqueous batteries with Zn²⁺ as a working‐ion are promising candidates for grid‐scale energy storage because of their intrinsic safety, low‐cost, and high energy‐intensity. However, suitable cathode materials with excellent Zn²⁺‐storage cyclability must be found in order for Zinc‐ion batteries (ZIBs) to find practical applications. Herein, NaCa_0.6V₆O₁₆·3H₂O (NaCaVO) barnesite nanobelts are reported as an ultra‐stable ZIB cathode material. The original capacity reaches 347 mAh g^?1 at 0.1 A g^?1, and the capacity retention rate is 94% after 2000 cycles at 2 A g^?1 and 83% after 10 000 cycles at 5 A g^?1, respectively. Through a combined theoretical and experimental approach, it is discovered that the unique V₃O₈ layered structure in NaCaVO is energetically favorable for Zn²⁺ diffusion and the structural water situated between V₃O₈ layers promotes a fast charge‐transfer and bulk migration of Zn²⁺ by enlarging gallery spacing and providing more Zn‐ion storage sites. It is also found that Na⁺ and Ca²⁺ alternately suited in V₃O₈ layers are the essential stabilizers for the layered structure, which play a crucial role in retaining long‐term cycling stability.     

Multi‐Scale Investigations of δ‐Ni0.25V2O5·nH2O Cathode Materials in Aqueous Zinc‐Ion Batteries

Cost‐effective and environment‐friendly aqueous zinc‐ion batteries (AZIBs) exhibit tremendous potential for application in grid‐scale energy storage systems but are limited by suitable cathode materials. Hydrated vanadium bronzes have gained significant attention for AZIBs and can be produced with a range of different pre‐intercalated ions, allowing their properties to be optimized. However, gaining a detailed understanding of the energy storage mechanisms within these cathode materials remains a great challenge due to their complex crystallographic frameworks, limiting rational design from the perspective of enhanced Zn²⁺ diffusion over multiple length scales. Herein, a new class of hydrated porous δ‐Ni_0.25V₂O₅.nH₂O nanoribbons for use as an AZIB cathode is reported. The cathode delivers reversibility showing 402 mAh g^?1 at 0.2 A g^?1 and a capacity retention of 98% over 1200 cycles at 5 A g^?1. A detailed investigation using experimental and computational approaches reveal that the host “δ” vanadate lattice has favorable Zn²⁺ diffusion properties, arising from the atomic‐level structure of the well‐defined lattice channels. Furthermore, the microstructure of the as‐prepared cathodes is examined using multi‐length scale X‐ray computed tomography for the first time in AZIBs and the effective diffusion coefficient is obtained by image‐based modeling, illustrating favorable porosity and satisfactory tortuosity.     

Sodium Ion Stabilized Vanadium Oxide Nanowire Cathode for High‐Performance Zinc‐Ion Batteries

Aqueous Zn‐ion batteries (ZIBs) have received incremental attention because of their cost‐effectiveness and the materials abundance. They are a promising choice for large‐scale energy storage applications. However, developing suitable cathode materials for ZIBs remains a great challenge. In this work, pioneering work on the designing and construction of aqueous Zn//Na_0.33V₂O₅ batteries is reported. The Na_0.33V₂O₅ (NVO) electrode delivers a high capacity of 367.1 mA h g^?1 at 0.1 A g^?1, and exhibits long‐term cyclic stability with a capacity retention over 93% for 1000 cycles. The improvement of electrical conductivity, resulting from the intercalation of sodium ions between the [V₄O₁₂]_n layers, is demonstrated by single nanowire device. Furthermore, the reversible intercalation reaction mechanism is confirmed by X‐ray diffraction, Raman, X‐ray photoelectron spectroscopy, scanning electron microscopy, and transmission electron microscopy analysis. The outstanding performance can be attributed to the stable layered structure and high conductivity of NVO. This work also indicates that layered structural materials show great potential as the cathode of ZIBs, and the indigenous ions can act as pillars to stabilize the layered structure, thereby ensuring an enhanced cycling stability.     

H2V3O8 Nanowire/Graphene Electrodes for Aqueous Rechargeable Zinc Ion Batteries with High Rate Capability and Large Capacity

Aqueous rechargeable zinc ion batteries are considered a promising candidate for large‐scale energy storage owing to their low cost and high safety nature. A composite material comprised of H₂V₃O₈ nanowires (NWs) wrapped by graphene sheets and used as the cathode material for aqueous rechargeable zinc ion batteries is developed. Owing to the synergistic merits of desirable structural features of H₂V₃O₈ NWs and high conductivity of the graphene network, the H₂V₃O₈ NW/graphene composite exhibits superior zinc ion storage performance including high capacity of 394 mA h g^?1 at 1/3 C, high rate capability of 270 mA h g^?1 at 20 C and excellent cycling stability of up to 2000 cycles with a capacity retention of 87%. The battery offers a high energy density of 168 W h kg^?1 at 1/3 C and a high power density of 2215 W kg^?1 at 20 C (calculated based on the total weight of H₂V₃O₈ NW/graphene composite and the theoretically required amount of Zn). Systematic structural and elemental characterization confirm the reversible Zn²⁺ and water cointercalation electrochemical reaction mechanism. This work brings a new prospect of designing high‐performance aqueous rechargeable zinc ion batteries for grid‐scale energy storage.     

2D Amorphous V2O5/Graphene Heterostructures for High‐Safety Aqueous Zn‐Ion Batteries with Unprecedented Capacity and Ultrahigh Rate Capability

Rechargeable aqueous zinc‐ion batteries (ZIBs) are appealing due to their high safety, zinc abundance, and low cost. However, developing suitable cathode materials remains a great challenge. Herein, a novel 2D heterostructure of ultrathin amorphous vanadium pentoxide uniformly grown on graphene (A‐V₂O₅/G) with a very short ion diffusion pathway, abundant active sites, high electrical conductivity, and exceptional structural stability, is demonstrated for highly reversible aqueous ZIBs (A‐V₂O₅/G‐ZIBs), coupling with unprecedented high capacity, rate capability, long‐term cyclability, and excellent safety. As a result, 2D A‐V₂O₅/G heterostructures for stacked ZIBs at 0.1 A g^?1 display an ultrahigh capacity of 489 mAh g^?1, outperforming all reported ZIBs, with an admirable rate capability of 123 mAh g^?1 even at 70 A g^?1. Furthermore, the new‐concept prototype planar miniaturized zinc‐ion microbatteries (A‐V₂O₅/G‐ZIMBs), demonstrate a high volumetric capacity of 20 mAh cm^?3 at 1 mA cm^?2, long cyclability; holding high capacity retention of 80% after 3500 cycles, and in‐series integration, demonstrative of great potential for highly‐safe microsized power sources. Therefore, the exploration of such 2D heterostructure materials with strong synergy is a reliable strategy for developing safe and high‐performance energy storage devices.     

Defect Engineering of Oxygen‐Deficient Manganese Oxide to Achieve High‐Performing Aqueous Zinc Ion Battery

A major limitation of MnO₂ in aqueous Zn/MnO₂ ion battery applications is the poor utilization of its electrochemical active surface area. Herein, it is shown that by generating oxygen vacancies (V_O) in the MnO₂ lattice, Gibbs free energy of Zn²⁺ adsorption in the vicinity of V_O can be reduced to thermoneutral value (≈0.05 eV). This suggests that Zn²⁺ adsorption/desorption process on oxygen‐deficient MnO₂ is more reversible as compared to pristine MnO₂. In addition, because of the fact that fewer electrons are needed for Zn? O bonding in oxygen‐deficient MnO₂, more valence electrons can be contributed into the delocalized electron cloud of the material, which aids in enhancing the attainable capacity. As a result, the stable Zn/oxygen‐deficient MnO₂ battery is able to deliver one of the highest capacities of 345 mAh g^?1 reported for a birnessite MnO₂ system. This excellent electrochemical performance suggests that generating oxygen vacancies in MnO₂ may aid in the future development of advanced cathodes for aqueous Zn ion batteries.     

Additional Sodium Insertion into Polyanionic Cathodes for Higher‐Energy Na‐Ion Batteries

Na‐ion technology is increasingly studied as a low‐cost solution for grid storage applications. Many positive electrode materials have been reported, mainly among layered oxides and polyanionic compounds. The vanadium oxy/flurophosphate solid solution Na₃V₂(PO₄)₂F_3‐y O_2y (0 ≤ y ≤ 1), in particular, has proven the ability to deliver ≈500 Wh kg^‐1, operating on the V³⁺/V⁴⁺ (y = 0) or V⁴⁺/V⁵⁺ redox couples (y = 1). This paper reports here on a significant increase in specific energy by enabling sodium insertion into Na₃V₂(PO₄)₂FO₂ to reach Na₄V₂(PO₄)₂FO₂ upon discharge. This occurs at ≈1.6 V and increases the theoretical specific energy to 600 Wh kg^?1, rivaling that of several Li‐ion battery cathodes. This improvement is achieved by the judicious modification of the composition either as O for F substitution, or Al for V substitution, both of which disrupt Na‐ion ordering and thereby enable insertion of the 4th Na. This paper furthermore shows from operando X‐Ray Diffraction (XRD) that this energy is obtained in the cycling range Na₄V₂(PO₄)₂FO₂–NaV₂(PO₄)₂FO₂ with a very small overall volume change of 1.7%, which is one of the smallest volume changes for Na‐ion cathodes and which is a crucial requisite for stable long‐term cycling.     

Leaf cell membrane stability‐based mechanisms of zinc nutrition in mitigating salinity stress in rice

• Excess salt affects about 955 million ha of arable land worldwide, and 49% of agricultural land is Zn‐deficient. Soil salinity and zinc deficiency can intensify plant abiotic stress. The mechanisms by which Zn can mitigate salinity effects on plant functions are not well understood.
• We conducted an experiment to determine how Zn and salinity effects on rice plant retention of Zn, K⁺ and the salt ion Na⁺ affect chlorophyll formation, leaf cell membrane stability and grain yield. We examined the mechanisms of Zn nutrition in mitigating salinity stress by examining plant physiology and nutrition. We used native Zn‐deficient soils (control), four salinity (EC ) and Zn treatments – Zn 10 mg·kg^?1 (Zn₁₀), EC 5 dS ·m^?1 (EC ₅), Zn₁₀+EC ₅ and Zn₁₅+EC ₅, a coarse rice (KS ‐282) and a fine rice (Basmati‐515) in the study.
• Our results showed that Zn alone (Zn₁₀) significantly increased rice tolerance to salinity stress by promoting Zn/K⁺ retention, inhibiting plant Na⁺ uptake and enhancing leaf cell membrane stability and chlorophyll formation in both rice cultivars in native alkaline, Zn‐deficient soils (P  <  0.05). Further, under the salinity treatment (EC ₅), Zn inputs (10–15 mg·kg^?1) could also significantly promote rice plant Zn/K⁺ retention and reduce plant Na⁺ uptake, and thus increased leaf cell membrane stability and grain yield. Coarse rice was more salinity‐tolerant than fine rice, having significantly higher Zn/K⁺ nutrient retention.
• The mechanistic basis of Zn nutrition in mitigating salinity impacts was through promoting plant Zn/K⁺ uptake and inhibiting plant Na⁺ uptake, which could result in increased plant physiological vigour, leaf cell membrane stability and rice productivity.

     

Mechanism of Na+ Insertion in Alkali Vanadates and Its Influence on Battery Performance

Sodium‐ion batteries may become an alternative to the widespread lithium‐ion technology due to cost and kinetic advantages provided that cyclability is improved. For this purpose, the interplay between electrochemical and structural processes is key and is demonstrated in this work for Na_2.46V₆O₁₆ (NVO) and Li_2.55V₆O₁₆ employing operando synchrotron X‐ray diffraction. When NVO is cycled between 4.0 and 1.6 V, Na‐ions reversibly occupy two crystallographic sites, which results in remarkable cyclability. Upon discharge to 1.0 V, however, Na‐ions occupy also interstitial sites, inducing irreversible structural change with some loss of crystallinity concomitant with a decrease in capacity. Capacity fading increases with the ionic radius of the alkali ions (K⁺ > Na⁺ > Li⁺), suggesting that smaller ions stabilize the structure. This correlation of structural variation and electrochemical performance suggests a route toward improving cycling stability of a sodium‐ion battery. Its essence is a minor Li⁺‐retention in the A_2+xV₆O₁₆ structure. Even though the majority of Li‐ions are replaced by the abundant Na⁺, the residual Li‐ions (≈10%) are sufficient to stabilize the layered structure, diminishing the irreversible structural damage. These results pave the way for further exploitation of the role of small ions in lattice stabilization that increases cycling performance.     

An Ultrastable Presodiated Titanium Disulfide Anode for Aqueous “Rocking‐Chair” Zinc Ion Battery

Rechargeable aqueous Zn‐based batteries are attractive candidates as energy storage technology, but the uncontrollable Zn dendrites, low stripping/plating coulombic efficiency, and inefficient utilization of Zn metal limit the battery reliability and energy density. Herein, for the first time, a novel presodiated TiS₂ (Na_0.14TiS₂) is proposed and investigated as an intercalated anode for aqueous Zn‐ion batteries, showing a capacity of 140 mAh g^?1 with a suitable potential of 0.3 V (vs Zn²⁺/Zn) at 0.05 A g^?1 and superior cyclability of 77% retention over 5000 cycles at 0.5 A g^?1. The remarkable performance originates from the buffer phase formation of Na_0.14TiS₂ after chemically presodiating TiS₂, which not only improves the structural reversibility and stability but also enhances the diffusion coefficient and electronic conductivity, and lowers cation migration barrier, as evidenced by a series of experimental and theoretical studies. Moreover, an aqueous “rocking‐chair” Zn‐ion full battery is successfully demonstrated by this Na_0.14TiS₂ anode and ZnMn₂O₄ cathode, which delivers a capacity of 105 mAh g^?1 (for anode) with an average voltage of 0.95 V at 0.05 A g^?1 and preserves 74% retention after 100 cycles at 0.2 A g^?1, demonstrating the feasibility of Zn‐ion full batteries for energy storage applications.     

Zinc and salinity effects on membrane transport in Chara connivens

Pressure-probe measurements showed that the pressure relaxation of internodal cells of the freshwater alga Chara connivens slowed considerably when 1–5 mol m^?3 Zn²⁺, or more especially Zn²⁺ and 75 mol m^?3 NaCl, were present in the medium for periods of 1 h or longer. These results indicate that the water permeability of the Chara membrane is decreased by Zn²⁺, and that this effect is enhanced by 75 mol m^?3 NaCl. Specific values taken after 375 min exposure were: 5 mol m^?3 Zn²⁺ and 75 mol m^?3 NaCl caused the half-time for bulk water movement to increase from 7·8±2·3 to 79·5±5·4s, corresponding to a decrease in the hydraulic conductivity (Lp) from (13·0±3·3) × 10^?7 m s^?1 mPa^?1 to (1·25±0·23) × 10^?7 m s^?1 MPa^?1 (mean±S.D., n= 10). These changes are not seen in the presence of NaCl alone, and to a reduced extent in the presence of 5 mol m^?3Zn²⁺ alone (after 375 min, Lp was (2·4±0·1) × 10^?7 m s^?1 MPa^?1, mean±S.D., n = 6). Ca²⁺ cannot substitute for Zn²⁺, but seems to competitively inhibit Zn²⁺. There was another, kinetically distinct effect of Zn²⁺: the ingress of Na⁺ within 15 min of exposure to 75 mol m^?3 NaCl is halved by the presence of 1–5 mol m^?3 Zn²⁺, although internal osmolality is little changed by Zn²⁺. In spite of this, Zn²⁺ does not exert the long-term protection against NaCl that has been reported for Ca²⁺. Depending on the concentration of Zn²⁺ and the duration of the exposure, the effects on water permeability were fully or partly reversible within 24–48 h. The mechanism of these changes is difficult to identify. One possibility is a zinc-induced restriction of trans-membrane channels to give single-file channels which can be blocked by salt.     

In Situ Electrochemical Synthesis of MXenes without Acid/Alkali Usage in/for an Aqueous Zinc Ion Battery

The traditional method to fabricate a MXene based energy storage device starts from etching MAX phase particles with dangerous acid/alkali etchants to MXenes, followed by device assembly. This is a multistep protocol and is not environmentally friendly. Herein, an all‐in‐one protocol is proposed to integrate synthesis and battery fabrication of MXene. By choosing a special F‐rich electrolyte, MAX V₂AlC is directly exfoliated inside a battery and the obtained V₂CT_X MXene is in situ used to achieve an excellent battery performance. This is a one‐step process with all reactions inside the cell, avoiding any contamination to external environments. Through the lifetime, the device experiences three stages of exfoliation, electrode oxidation, and redox of V₂O₅. While the electrode is changing, the device can always be used as a battery and the performance is continuously enhanced. The resulting aqueous zinc ion battery achieves outstanding cycling stability (4000 cycles) and rate performance (97.5 mAh g^?1 at 64 A g^?1), distinct from all reported aqueous MXene‐based counterparts with pseudo‐capacitive properties, and outperforming most vanadium‐based zinc ion batteries with high capacity. This work sheds light on the green synthesis of MXenes, provides an all‐in‐one protocol for MXene devices, and extends MXenes’ application in the aqueous energy storage field.     

The Charge Storage Mechanisms of 2D Cation‐Intercalated Manganese Oxide in Different Electrolytes

2D ion‐intercalated metal oxides are emerging promising new electrodes for supercapacitors because of their unique layered structure as well as distinctive electronic properties. To facilitate their application, fundamental study of the charge storage mechanism is required. Herein, it is demonstrated that the application of in situ Raman spectroscopy and electrochemical quartz crystal microbalance with dissipation monitoring (EQCM‐D), provides a sufficient basis to elucidate the charge storage mechanism in a typical 2D cation‐intercalated manganese oxide (Na_0.55Mn₂O₄·1.5H₂O, abbreviated as NMO) in neutral and alkaline aqueous electrolytes. The results reveal that in neutral Na₂SO₄ electrolytes, NMO mainly displays a surface‐controlled pseudocapacitive behavior in the low potential region (0–0.8 V), but when the potential is higher than 0.8 V, an intercalation pseudocapacitive behavior becomes dominant. By contrast, NMO shows a battery‐like behavior associated with OH^? ions in alkaline NaOH electrolyte. This study verifies that the charge storage mechanism of NMO strongly depends on the type of electrolyte, and even in the same electrolyte, different charging behaviors are revealed in different potential ranges which should be carefully taken into account when optimizing the use of the electrode materials in practical energy‐storage devices.     

Nanoparticles Encapsulated in Porous Carbon Matrix Coated on Carbon Fibers: An Ultrastable Cathode for Li‐Ion Batteries

Nanostructured V₂O₅ is emerging as a new cathode material for lithium ion batteries for its distinctly high theoretic capacity over the current commercial cathodes. The main challenges associated with nanostructured V₂O₅ cathodes are structural degradation, instability of the solid‐electrolyte interface layer, and poor electron conductance, which lead to low capacity and rapid decay of cyclic stability. Here, a novel composite structure of V₂O₅ nanoparticles encapsulated in 3D networked porous carbon matrix coated on carbon fibers (V₂O₅/3DC‐CFs) is reported that effectively addresses the mentioned problems. Remarkably, the V₂O₅/3DC‐CF electrode exhibits excellent overall lithium‐storage performance, including high Coulombic efficiency, excellent specific capacity, outstanding cycling stability and rate property. A reversible capacity of ≈183 mA h g^?1 is obtained at a high current density of 10 C, and the battery retains 185 mA h g^?1 after 5000 cycles, which shows the best cycling stability reported to date among all reported cathodes of lithium ion batteries as per the knowledge. The outstanding overall properties of the V₂O₅/3DC‐CF composite make it a promising cathode material of lithium ion batteries for the power‐intensive energy storage applications.     

Open‐Structured V2O5·nH2O Nanoflakes as Highly Reversible Cathode Material for Monovalent and Multivalent Intercalation Batteries

The high‐capacity cathode material V₂O₅·n H₂O has attracted considerable attention for metal ion batteries due to the multielectron redox reaction during electrochemical processes. It has an expanded layer structure, which can host large ions or multivalent ions. However, structural instability and poor electronic and ionic conductivities greatly handicap its application. Here, in cell tests, self‐assembly V₂O₅·n H₂O nanoflakes shows excellent electrochemical performance with either monovalent or multivalent cation intercalation. They are directly grown on a 3D conductive stainless steel mesh substrate via a simple and green hydrothermal method. Well‐layered nanoflakes are obtained after heat treatment at 300 °C (V₂O₅·0.3H₂O). Nanoflakes with ultrathin flower petals deliver a stable capacity of 250 mA h g^?1 in a Li‐ion cell, 110 mA h g^?1 in a Na‐ion cell, and 80 mA h g^?1 in an Al‐ion cell in their respective potential ranges (2.0–4.0 V for Li and Na‐ion batteries and 0.1–2.5 V for Al‐ion battery) after 100 cycles.     

Pseudo‐Zn–Air and Zn‐Ion Intercalation Dual Mechanisms to Realize High‐Areal Capacitance and Long‐Life Energy Storage in Aqueous Zn Battery

Aqueous zinc batteries are considered as promising alternatives to lithium ion batteries owing to their low cost and high safety. However, the developments of state‐of‐the‐art zinc‐ion batteries (ZIB) and zinc–air batteries (ZAB) are limited by the unsatisfied capacities and poor cycling stabilities, respectively. It is of significance in utilizing the long‐cycle life of ZIB and high capacity of ZAB to exploit advanced energy storage systems. Herein, a bulk composite of graphene oxide and vanadium oxide (V₅O₁₂·6H₂O) as cathode material for aqueous Zn batteries in a mild electrolyte is employed. The battery performance is demonstrated to arise from a combination of the reversible cations insertion/extraction in vanadium oxide and especially the electrochemical redox reactions on the surface functional groups of graphene oxide (named as pseudo‐Zn–air mechanism). Along with adjusting the hydroxyl content on the surface of graphene oxide, the specific capacity is significantly increased from 342 mAh g^?1 to a maximum of 496 mAh g^?1 at 100 mA g^?1. The surface‐controlled kinetics occurring in the bulk composite ensure a high areal capacity of 10.6 mAh cm^?2 at a mass loading of 26.5 mg cm^?2, and a capacity retention of 84.7% over 10 000 cycles at a high current density of 10 A g^?1.     

The influences of water solvent on the structures and stabilities of Na+–AD conformers

The influences of water solvent on the structures and stabilities of the complex ion conformers formed by the coordination of alanine dipeptide (AD) and Na⁺ have been investigated using supramolecular and polarizable continuum solvation models at the level of B3LYP/6-311++G**, respectively; 12 monohydrated and 12 dihydrated structures of Na⁺–AD complex ion were obtained after full geometrical optimization. The results showed that H₂O molecules easily bind with Na⁺ of Na⁺–AD complex ion, forming an ion-lone pair interaction with the Na–O bond length of 2.1–2.3 Å. Besides, H₂O molecules also can form hydrogen bonds O_W–H_W···O(1), O_W–H_W···O(2), N(1)–H(1)···O_W or N(2)–H(2)···O_W with O or N groups of the Na⁺–AD backbone. The most stable gaseous bidentate conformer C7AB of Na⁺–AD is still the most stable one in the solvent of water. However, the structure of the most unstable gaseous conformer α′B of Na⁺–AD collapses under the attack of H₂O molecules and changes into C7AB conformation. Computations with IEFPCM solvation model of self-consistent reaction field theory give that aqueous C5A is more stable than C7_eqB and that the stabilization energies of water solvent on monodentate conformers of Na⁺–AD complex ion (about 272–294 kJ/mol) are more than those on bidentate ones (about 243 kJ/mol).     

Zinc–Ligand Interactions Modulate Assembly and Stability of the Insulin Hexamer – A Review

Zinc and calcium ions play important roles in the biosynthesis and storage of insulin. Insulin biosynthesis occurs within the β-cells of the pancreas via preproinsulin and proinsulin precursors. In the golgi apparatus, proinsulin is sequestered within Zn²⁺- and Ca²⁺-rich storage/secretory vesicles and assembled into a Zn²⁺ and Ca²⁺ containing hexameric species, (Zn²⁺)₂(Ca²⁺)(Proin)₆. In the vesicle, (Zn²⁺)₂(Ca²⁺)(Proin)₆ is converted to the insulin hexamer, (Zn²⁺)₂(Ca²⁺)(In)₆, by excision of the C-peptide through the action of proteolytic enzymes. The conversion of (Zn²⁺)₂(Ca²⁺)(Proin)₆to (Zn²⁺)₂(Ca²⁺)(In)₆ significantly lowers the solubility of the hexamer, causing crystallization within the vesicle. The (Zn²⁺)₂(Ca²⁺)(In)₆ hexamer is an allosteric protein that undergoes ligand-mediated interconversion among three global conformation states designated T₆, T₃R₃ and R₆. Two classes of allosteric sites have been identified; hydrophobic pockets (3 in T₃R₃ and 6 in R₆) that bind phenolic ligands, and anion sites (1 in T₃R₃ and 2 in R₆) that bind monovalent anions. The allosteric states differ widely with respect to the physical and chemical stability of the insulin subunits. Fusion of the vesicle with the plasma membrane results in the expulsion of the insulin crystals into the intercellular fluid. Dissolution of the crystals, dissociation of the hexamers to monomer and transport of monomers to the liver and other tissues then occurs via the blood stream. Insulin action then follows binding to the insulin receptors. The role of Zn²⁺ in the assembly, structure, allosteric properties, and dynamic behavior of the insulin hexamer will be discussed in relation to biological function.     

Multi-color luminescence of Sm3+-doped Na2YMg2V3O12 phosphor potentially applicable in white-LEDs

A novel multi-color emitting Na₂YMg₂V₃O₁₂:Sm³⁺ phosphor was synthesized using a solid-state reaction, and its crystal structure, luminescence properties, and thermal stability were studied. Charge transfer within the (VO₄)³⁻ groups in the Na₂YMg₂V₃O₁₂ host led to a broad emission band between 400 and 700 nm, with a maximum at 530 nm. The Na₂Y_1−xMg₂V₃O₁₂:xSm³⁺ phosphors exhibited a multi-color emission band under 365 nm near-ultraviolet (near-UV) light, consisting of the green emission of the (VO₄)³⁻ groups and sharp emission peaks at 570 nm (yellow), 618 nm (orange), 657 nm (red), and 714 nm (deep red) of Sm³⁺ ions. The optimal doping concentration of Sm³⁺ ions was found to be 0.05 mol%, and the dipole–dipole (d–d) interaction was primarily responsible for the concentration quenching phenomenon. Using the acquired Na₂YMg₂V₃O₁₂:Sm³⁺ phosphors, commercial BaMgAl₁₀O₁₇:Eu²⁺ blue phosphor, and a near-UV light-emitting diode (LED) chip, a white-LED lamp was designed and packaged. It produced bright neutral white light, manifesting a CIE coordinate of (0.314, 0.373), a color rendering index (CRI) of 84.9, and a correlated color temperature (CCT) of 6377 K. These findings indicate the potential of Na₂YMg₂V₃O₁₂:Sm³⁺ phosphor to be used as a multi-color component for solid-state illumination.     

A Novel High Capacity Positive Electrode Material with Tunnel‐Type Structure for Aqueous Sodium‐Ion Batteries

Aqueous sodium‐ion batteries have shown desired properties of high safety characteristics and low‐cost for large‐scale energy storage applications such as smart grid, because of the abundant sodium resources as well as the inherently safer aqueous electrolytes. Among various Na insertion electrode materials, tunnel‐type Na_0.44MnO₂ has been widely investigated as a positive electrode for aqueous sodium‐ion batteries. However, the low achievable capacity hinders its practical applications. Here, a novel sodium rich tunnel‐type positive material with a nominal composition of Na_0.66[Mn_0.66Ti_0.34]O₂ is reported. The tunnel‐type structure of Na_0.44MnO₂ obtained for this compound is confirmed by X‐ray diffraction and atomic‐scale spherical aberration‐corrected scanning transmission electron microscopy/electron energy‐loss spectrum. When cycled as positive electrode in full cells using NaTi₂(PO₄)₃/C as negative electrode in 1 m Na₂SO₄ aqueous electrolyte, this material shows the highest capacity of 76 mAh g^?1 among the Na insertion oxides with an average operating voltage of 1.2 V at a current rate of 2 C. These results demonstrate that Na_0.66[Mn_0.66Ti_0.34]O₂ is a promising positive electrode material for rechargeable aqueous sodium‐ion batteries.