Chemical synthesis of N‐glycosylated insulin‐like androgenic gland factor from the freshwater prawn Macrobrachium rosenbergii

Crustacean insulin‐like androgenic gland factor (IAG) of Macrobrachium rosenbergii, a heterodimeric peptide having both four disulfide bonds and an N‐linked glycan, was synthesized by the combination of solid‐phase peptide synthesis and the regioselective disulfide formation reactions. The disulfide isomer of IAG could also be synthesized by the same manner. The conformational analysis of these peptides by circular dichroism (CD) spectral measurement indicated that the disulfide bond arrangement affected the peptide conformation in IAG. On the other hand, the N‐linked glycan attached at A chain showed no effect on CD spectra of IAG. This is the first report for the chemical synthesis of insulin‐like heterodimeric glycopeptide having three interchain disulfides, and the synthetic strategy shown here might be useful for the synthesis of other glycosylated four‐disulfide insulin‐like peptides.     

Thiocarbamate‐linked peptides by chemoselective peptide ligation

Peptide chemical ligation chemistries, which allow the chemoselective coupling of unprotected peptide fragments, are useful tools for synthesizing native polypeptides or unnatural peptide‐based macromolecules. We show here that the phenylthiocarbonyl group can be easily introduced into peptides on α or ε amino groups using phenylthiochloroformate and standard solid‐phase method. It reacts chemoselectively with cysteinyl peptides to give an alkylthiocarbamate bond. S,N‐shift of the alkylaminocarbonyl group from the Cys side chain to the α‐amino group did not occur. The method was used for linking two peptide chains through their N‐termini, for the synthesis of a cyclic peptide or for the synthesis of di‐ or tetravalent multiple antigenic peptides (MAPs). Thiocarbamate ligation is thus complementary to thioether, thioester or disulfide ligation methods. Copyright © 2008 European Peptide Society and John Wiley & Sons, Ltd.     

A convenient microwave‐enhanced solid‐phase synthesis of short chain N‐methyl‐rich peptides

Structural modification of the peptide backbone via N‐methylation is a powerful tool to modulate the pharmacokinetic profile and biological activity of peptides. Here we describe a rapid and highly efficient microwave(MW)‐assisted Fmoc/tBu solid‐phase method to prepare short chain N‐methyl‐rich peptides, using Rink amide p‐methylbenzhydrylamine (MBHA) resin as solid‐phase support. This method produces peptides in high yield and purity, and reduces the time required for Fmoc‐N‐methyl amino acid coupling. Copyright © 2010 European Peptide Society and John Wiley & Sons, Ltd.     

Site‐specific labeling of synthetic peptide using the chemoselective reaction between N‐methoxyamino acid and isothiocyanate

Site‐specific labeling of synthetic peptides carrying N‐methoxyglycine (MeOGly) by isothiocyanate is demonstrated. A nonapeptide having MeOGly at its N‐terminus was synthesized by the solid‐phase method and reacted with phenylisothiocyanate under various conditions. In acidic solution, the reaction specifically gave a peptide having phenylthiourea structure at its N‐terminus, leaving side chain amino group intact. The synthetic human β‐defensin‐2 carrying MeOGly at its N‐terminus or the side chain amino group of Lys¹⁰ reacted with phenylisothiocyanate or fluorescein isothiocyanate also at the N‐methoxyamino group under the same conditions, demonstrating that this method is generally useful for the site‐specific labeling of linear synthetic peptides as well as disulfide‐containing peptides. Copyright © 2015 European Peptide Society and John Wiley & Sons, Ltd.     

Lipid interactions of acylated tryptophan‐methylated lactoferricin peptides by solid‐state NMR

Lactoferricin (LfB) is a 25‐residue innate immunity peptide released by pepsin from the N‐terminal region of bovine lactoferrin. A smaller amidated peptide, LfB6 (RRWQWR‐NH₂) retains antimicrobial activity and is thought to constitute the “antimicrobial active‐site” (Tomita, Acta Paediatr Jpn. 1994; 36 : 585–91). Here we report on N‐acylation of 1‐Me‐Trp⁵‐LfB6, Cn‐RRWQ[1‐Me‐W]R‐NH₂, where Cn is an acyl chain having n = 0, 2, 4, 6 or 12 carbons. Tryptophan 5 (Trp⁵) was methylated to enhance membrane binding and to allow for selective deuteration at that position. Peptide/lipid interactions of Cn‐RRWQ[1‐Me‐W ]R‐NH₂ (deuterated 1‐Me‐Trp⁵ underlined), were monitored by solid state ³¹P NMR and ²H NMR. The samples consisted of macroscopically oriented bilayers of mixed neutral (dimyristoylphosphatidylcholine, DMPC) and anionic (dimyristoylphosphatidylglycerol, DMPG) lipids in a 3:1 ratio with Cn‐RRWQ[&1‐Me‐W ]R‐NH₂ peptides added at a 1:25 peptide to lipid ratio. ²H‐NMR spectra reveal that the acylated peptides are well aligned in DMPC:DMPG bilayers. The ²H NMR quadrupolar splittings suggest that the 1‐Me‐Trp is located in a motionally restricted environment, indicating partial alignment at the membrane interface. ³¹P‐NMR spectra reveal that the lipids are predominantly in a bilayer configuration, with little perturbation by the peptides. Methylation alone, in C0‐RRWQ[1‐Me‐W ]R‐NH₂, resulted in a 3–4 fold increase in antimicrobial activity against E. coli. N‐acylation with a C12 fatty acid enhanced activity almost 90 fold. Copyright © 2008 European Peptide Society and John Wiley & Sons, Ltd.     

On‐resin synthesis of novel arginine‐isostere peptides bearing substituted amidine headgroups

A methodology is presented for the facile synthesis of Arg‐containing peptides modified at the guanidine headgroup as substituted amidine cores. This process allows for the iterative construction of these Arg isosteres while the peptide is being built out on the solid support, providing a high potential for diversity in substitution pattern in the resulting peptide. A series of N‐Pmc‐substituted thioamides were condensed with deprotected δ‐N Orn‐bearing peptides while attached to the solid support using Mukaiyama's reagent as coupling reagent, yielding isosteric Arg‐containing analogs. Peptides were cleaved using trimethylsilyl trifluoromethanesulfonate/TFA and analyzed in their crude form in order to illustrate the amenability of this process toward production of peptide isolates in high crude purity. Arg‐containing peptides having a single Arg isostere were utilized to show the general utility of this approach as well as a multiple‐Arg‐containing construct, illustrating the amenability of this method toward stepwise construction of differently substituted amidine headgroups within the same peptide. Copyright © 2011 European Peptide Society and John Wiley & Sons, Ltd.     

Synthesis of relaxin‐2 and insulin‐like peptide 5 enabled by novel tethering and traceless chemical excision

This report presents an entirely chemical, general strategy for the synthesis of relaxin‐2 and insulin‐like peptide 5. Historically, these two peptides have represented two of the more synthetically challenging members of the insulin superfamily. The key synthetic steps involve two sequential oxime ligations to covalently link the individual A‐chain and B‐chain, followed by disulfide bond formation under aqueous, redox conditions. This is followed by two chemical reactions that employ diketopiperazine cyclization‐mediated cleavage and ester hydrolysis to liberate the connecting peptide and the heterodimeric product. This approach avoids the conventional iodine‐mediated disulfide bond formation and enzyme‐assisted proteolysis to generate biologically active two‐chain peptides. This novel synthetic strategy is ideally suited for peptides such as relaxin and insulin‐like peptide 5 as they possess methionine and tryptophan that are labile under strong oxidative conditions. Additionally, these peptides possess multiple arginine and lysine residues that preclude the use of trypsin‐like enzymes to obtain biologically active hormones. This synthetic methodology is conceivably applicable to other two‐chain peptides that contain multiple disulfide bonds. Copyright © 2017 European Peptide Society and John Wiley & Sons, Ltd.     

Side‐chain thioamides as fluorescence quenching probes

Thioamides, single atom oxygen‐to‐sulfur substitutions of canonical amide bonds, can be valuable probes for protein folding and protease studies. Here, we investigate the fluorescence quenching properties of thioamides incorporated into the side‐chains of amino acids. We synthesize and incorporate Fmoc‐protected, solid‐phase peptide synthesis building blocks for introducing N^ε‐thioacetyl‐lysine and γ‐thioasparagine. Using rigid model peptides, we demonstrate the distance‐dependent fluorescence quenching of these thioamides. Furthermore, we describe attempts to incorporate of N^ε‐thioacetyl‐lysine into proteins expressed in Escherichia coli using amber codon suppression.     

High‐throughput profiling of N‐myristoylation substrate specificity across species including pathogens

One of the most critical modifications affecting the N‐terminus of proteins is N‐myristoylation. This irreversible modification affects the membrane‐binding properties of crucial proteins involved in signal transduction cascades. This cotranslational modification, catalyzed by N‐myristoyl transferase, occurs both in lower and higher eukaryotes and is a validated therapeutic target for several pathologies. However, this lipidation proves very difficult to be evidenced in vivo even with state‐of‐the‐art proteomics approaches or bioinformatics tools. A large part of N‐myristoylated proteins remains to be discovered and the rules of substrate specificity need to be established in each organism. Because the peptide substrate recognition occurs around the first eight residues, short peptides are used for modeling the reaction in vitro. Here, we provide a novel approach including a dedicated peptide array for high‐throughput profiling protein N‐myristoylation specificity. We show that myristoylation predictive tools need to be fine‐tuned to organisms and that their poor accuracy should be significantly enhanced. This should lead to strongly improved knowledge of the number and function of myristoylated proteins occurring in any proteome.     

Pentapeptides containing two dehydrophenylalanine residues ‐ synthesis,structural studies and evaluation of their activity towards cathepsin C

Synthesis, structural and biological studies of pentapeptides containing two ΔPhe residues (Z and E isomers) in position 2 and 4 in peptide chain were performed. All the investigated peptides adopted bent conformation and majority of them could exist as two different conformers in solution. Only pentapeptides, containing free N‐termini appeared to act as weak inhibitors of cathepsin C with the slow‐binding, competitive mechanism of inhibition, free acids being bound slightly better than their methyl esters. Results of molecular modeling suggested significant difference between peptides, depending of the type of amino acid residue in position 5 in peptide chain. Dehydropeptides containing Gly residue in this position may act as competitive slow‐reacting substrates and therefore exhibit inhibitory‐like properties. Copyright © 2008 European Peptide Society and John Wiley & Sons, Ltd.     

Trifluoroethanol‐containing RP‐HPLC mobile phases for the separation of transmembrane peptides human glycophorin‐A,integrin alpha‐1, and p24: analysis and prevention of potential side reactions due to formic acid

Reversed‐phase high‐pressure liquid chromatography analysis and purification of three hydrophobic, aggregation‐prone peptides, composed mainly of the transmembrane (TM) sequence, were performed using elution systems containing 2,2,2‐trifluoroethanol (TFE). The addition of 10–16% TFE to a common mobile phase, such as a water/acetonitrile/propanol (PrOH) or a water/PrOH/formic acid system, markedly improved the chromatographic separation of these peptides. The superior performance of TFE‐containing systems in separating peptides over water/PrOH/formic acid systems [Bollhagen R. et al., J. Chromatogr. A, 1995; 711 : 181–186.] clearly demonstrated that adding TFE to the mobile phase is one of best methods for TM‐peptide purification. Characterization of the potential side reactions using MALDI and ESI‐LIT/Orbitrap mass spectrometry indicated that prolonged incubation of peptides in a mixture of TFE–formic acid possibly induces O‐formylation of the Ser residue and N‐formylation of the N‐terminus of peptides. The conditions for selective removal of the formyl groups from TM peptides were also screened. We believe that these results will expand our ability to analyze and prepare hydrophobic, aggregation‐prone TM peptides and proteins. Copyright © 2014 European Peptide Society and John Wiley & Sons, Ltd.     

Synthesis and application of N‐[1‐(4‐(4‐fluorophenyl)‐2,6‐dioxocyclohexylidene)ethyl] (Fde)‐protected amino acids for optimization of solid‐phase peptide synthesis using gel‐phase 19F NMR spectroscopy

N‐[1‐(4‐(4‐fluorophenyl)‐2,6‐dioxocyclohexylidene)ethyl] (Fde) protected amino acids have been prepared and applied in solid‐phase peptide synthesis monitored by gel‐phase ¹⁹F NMR spectroscopy. The Fde protective group could be cleaved with 2% hydrazine or 5% hydroxylamine solution in DMF as determined with gel‐phase ¹⁹F NMR spectroscopy. The dipeptide Ac‐L ‐Val‐L ‐Val‐NH₂ 12 was constructed using Fde‐L ‐Val‐OH and no noticeable racemization took place during the amino acid coupling with N,N′‐diisopropylcarbodiimide and 1‐hydroxy‐7‐azabenzotriazole or Fde deblocking. To extend the scope of Fde protection, the hydrophobic nonapeptide LLLLTVLTV from the signal sequence of mucin MUC1 was successfully prepared using Fde‐L ‐Leu‐OH at diagnostic positions. Copyright © 2009 European Peptide Society and John Wiley & Sons, Ltd.     

Synthesis of peptide thioesters via an N–S acyl shift reaction under mild acidic conditions on an N‐4,5‐dimethoxy‐2‐mercaptobenzyl auxiliary group

An efficient method of peptide thioester synthesis is described. The reaction is based on an N‐4,5‐dimethoxy‐2‐mercaptobenzyl (Dmmb) auxiliary‐assisted N‐S acyl shift reaction after assembling a peptide chain by Fmoc‐solid phase peptide synthesis. The Dmmb‐assisted N‐S acyl shift reaction proceeded efficiently under mildly acidic conditions, and the peptide thioester was obtained by treating the resulting S‐peptide with sodium 2‐mercaptoethanesulfonate. No detectable epimerization of the amino acid residue adjacent to the thioester moiety in the case of Leu was found. The reactions were also amenable to the on‐resin preparation of peptide thioesters. The utility was demonstrated by the synthesis of a 41‐mer peptide thioester, a phosphorylated peptide thioester and a 33‐mer peptide thioester containing a trimethylated lysine residue. Copyright © 2009 European Peptide Society and John Wiley & Sons, Ltd.     

An HPLC‐ESMS study on the solid‐phase assembly of C‐terminal proline peptides

DKP formation is a serious side reaction during the solid‐phase synthesis of peptide acids containing either Pro or Gly at the C‐terminus. This side reaction not only leads to a lower overall yield, but also to the presence in the reaction crude of several deletion peptides lacking the first amino acids. For the preparation of protected peptides using the Fmoc/tBu strategy, the use of a ClTrt‐Cl‐resin with a limited incorporation of the C‐terminal amino acid is the method of choice. The use of resins with higher loading levels leads to more impure peptide crudes. The use of HPLC‐ESMS is a useful method for analysing complex samples, such as those formed when C‐terminal Pro peptides are prepared by non‐optimized solid‐phase strategies. Copyright © 1999 European Peptide Society and John Wiley & Sons, Ltd.     

Cationic oligopeptides with the repeating sequence L‐lysyl‐L‐alanyl‐L‐alanine: conformational and thermal stability study using optical spectroscopic methods

The infrared (IR), vibrational circular dichroism (VCD), and electronic circular dichroism (ECD) spectra of short cationic sequential peptides (L ‐Lys‐L ‐Ala‐L ‐Ala)_n (n = 1, 2, and 3) were measured over a range of temperatures (20–90 °C) in aqueous solution at near‐neutral pH values in order to investigate their solution conformations and thermally induced conformational changes. VCD spectra of all three oligopeptides measured in the amide I′ region indicate the presence of extended helical polyproline II (PPII)‐like conformation at room temperature. UV‐ECD spectra confirmed this conclusion. Thus, the oligopeptides adopt a PPII‐like conformation, independent of the length of the peptide chain. However, the optimized dihedral angles ? and ψ are within the range ?82 to ?107° and 143–154°, respectively, and differ from the canonical PPII values. At elevated temperatures, the observed intensity and bandshape variations in the VCD and ECD spectra show that the PPII‐like conformation of the Lys‐Ala‐Ala sequence is still preferred, being in equilibrium with an unordered conformer at near‐neutral pH values within the range of temperatures from 20 to 90 °C. This finding was obtained from analysis of the temperature‐dependent spectra using the singular value decomposition method. The study presents KAA‐containing oligopeptides as conformationally stable models of biologically important cationic peptides and proteins. Copyright © 2009 European Peptide Society and John Wiley & Sons, Ltd.     

N‐(ureidoethyl)amides of cyclic enkephalin analogs

Novel N‐(ureidoethyl)amides of cyclic enkephalin analogs have been synthesized. The p‐nitrophenyl carbamate of 1‐Boc‐1,2‐diaminoethane was coupled with 4‐methylbenzhydrylamine (MBHA) resin. The Boc group was removed by treatment with HCl/dioxane, and the peptide chain was assembled using Boc strategy. For deprotection of amino function, HCl/dioxane was used. D ‐Lys or D ‐Orn were incorporated in position 2, and the side chains of Lys, Orn, Dab, or Dap in position 5 were protected with Fmoc group. Side chain protection was removed by treatment with 55% piperidine in DMF, and cyclization was achieved by treatment with bis‐(4‐nitrophenyl)carbonate to form a urea bridge. The peptide was cleaved from the resin by treatment with 45% TFA in DCM. The peptides were tested in the guinea‐pig ileum (GPI) and mouse vas deferens (MVD) assays. Divers opioid activities were observed, depending on the size of the ring. In comparison with [Leu⁵]enkephalin, all peptides were more active in the GPI assay (between 125 and 12 times), and some of them were also more potent in the MVD assay. The conformational propensities of each peptide were determined using the EDMC method in conjunction with NMR experiments. This approach allows treating the dynamical behavior of small peptides properly. The results were compared with those obtained previously for corresponding nonsubstituted amides and are in agreement with the biologically active conformation proposed by us earlier. Copyright © 2009 European Peptide Society and John Wiley & Sons, Ltd.     

Synthesis of stable C‐linked ferrocenyl amino acids and their use in solution‐phase peptide synthesis

Incorporation of ferrocenyl group to peptides is an efficient method to alter their hydrophobicity. Ferrocenyl group can also act as an electrochemical probe when incorporated onto functional peptides. Most often, ferrocene is incorporated onto peptides post‐synthesis via amide, ester or triazole linkages. Stable amino acids containing ferrocene as a C‐linked side chain are potentially useful building units for the synthesis of ferrocene‐containing peptides. We report here an efficient route to synthesize ferrocene‐containing amino acids that are stable and can be used in peptide synthesis. Coupling of 2‐ferrocenyl‐1,3‐dithiane and iodides derived from aspartic acid or glutamic acid using n‐butyllithium leads to the incorporation of a ferrocenyl unit to the δ‐position or ε‐position of an α‐amino acid. The reduction or hydrolysis of the dithiane group yields an alkyl or an oxo derivative. The usability of the synthesized amino acids is demonstrated by incorporating one of the amino acids in both C‐terminus and N‐terminus of tripeptides in solution phase. Copyright © 2015 European Peptide Society and John Wiley & Sons, Ltd.     

Synthesis and conformation of an analog of the helix‐loop‐helix domain of the Id1 protein containing the O‐acyl iso‐prolyl‐seryl switch motif

Synthetic peptides reproducing the helix‐loop‐helix (HLH) domains of the Id proteins fold into highly stable helix bundles upon self‐association. Recently, we have shown that the replacement of the dipeptide Val‐Ser at the loop–helix‐2 junction with the corresponding O‐acyl iso‐dipeptide leads to a completely unfolded state that only refolds after intramolecular O → N acyl migration. Herein, we report on an Id HLH analog based on the substitution of the Pro‐Ser motif at the helix‐1–loop junction with the corresponding O‐acyl iso‐dipeptide. This analog has been successfully synthesized by solid‐phase Fmoc chemistry upon suppression of DKP formation. No secondary structure could be detected for the O‐acyl iso‐peptide before its conversion into the native form by O → N acyl shift. These results show that the loop–helix junctions are determinant for the folded/unfolded state of the Id HLH domain. Further, despite the high risk of DKP formation, peptides containing O‐acyl iso‐Pro‐Ser/Thr units are synthetically accessible by Fmoc chemistry. Copyright © 2010 European Peptide Society and John Wiley & Sons, Ltd.     

Epitope motif of an anti‐nitrotyrosine antibody specific for tyrosine‐nitrated peptides revealed by a combination of affinity approaches and mass spectrometry

Nitration of tyrosine residues has been shown to be an important oxidative modification in proteins and has been suggested to play a role in several diseases such as atherosclerosis, asthma, lung and neurodegenerative diseases. Detection of nitrated proteins has been mainly based on the use of nitrotyrosine‐specific antibodies. In contrast, only a small number of nitration sites in proteins have been unequivocally identified by MS. We have used a monoclonal 3‐NT‐specific antibody, and have synthesized a series of tyrosine‐nitrated peptides of prostacyclin synthase (PCS) in which a single specific nitration site at Tyr‐430 had been previously identified upon reaction with peroxynitrite 17 . The determination of antibody‐binding affinity and specificity of PCS peptides nitrated at different tyrosine residues (Tyr‐430, Tyr‐421, Tyr‐83) and sequence mutations around the nitration sites provided the identification of an epitope motif containing positively charged amino acids (Lys and/or Arg) N‐terminal to the nitration site. The highest affinity to the anti‐3NT‐antibody was found for the PCS peptide comprising the Tyr‐430 nitration site with a K_D of 60 nM determined for the peptide, PCS(424‐436‐Tyr‐430NO₂); in contrast, PCS peptides nitrated at Tyr‐421 and Tyr‐83 had substantially lower affinity. ELISA, SAW bioaffinity, proteolytic digestion of antibody‐bound peptides and affinity‐MS analysis revealed highest affinity to the antibody for tyrosine‐nitrated peptides that contained positively charged amino acids in the N‐terminal sequence to the nitration site. Remarkably, similar N‐terminal sequences of tyrosine‐nitration sites have been recently identified in nitrated physiological proteins, such as eosinophil peroxidase and eosinophil‐cationic protein. Copyright © 2011 European Peptide Society and John Wiley & Sons, Ltd.     

A relaxin‐like gonad‐stimulating peptide identified from the starfish Astropecten scoparius

A relaxin‐like gonad‐stimulating peptide (RGP) in starfish was the first identified invertebrate gonadotropin responsible for final gamete maturation. An RGP ortholog was newly identified from Astropecten scoparius of the order Paxillosida. The A. scoparius RGP (AscRGP) precursor is encoded by a 354 base pair open reading frame and is a 118 amino acid (aa) protein consisting of a signal peptide (26 aa), B‐chain (21 aa), C‐peptide (47 aa), and A‐chain (24 aa). There are three putative processing sites (Lys‐Arg) between the B‐chain and C‐peptide, between the C‐peptide and A‐chain, and within the C‐peptide. This structural organization revealed that the mature AscRGP is composed of A‐ and B‐chains with two interchain disulfide bonds and one intrachain disulfide bond. The C‐terminal residues of the B‐chain are Gln‐Gly‐Arg, which is a potential substrate for formation of an amidated C‐terminal Gln residue. Non‐amidated (AscRGP‐GR) and amidated (AscRGP‐NH₂) peptides were chemically synthesized and their effect on gamete shedding activity was examined using A. scoparius ovaries. Both AscRGP‐GR and AscRGP‐NH₂ induced oocyte maturation and ovulation in similar dose‐dependent manners. This is the first report on a C‐terminally amidated functional RGP. Collectively, these results suggest that AscRGP‐GR and AscRGP‐NH₂ act as a natural gonadotropic hormone in A. scoparius.