Structural investigation of the capsular polysaccharide from Escherichia coli O9:K37 (A 84a)

The structure of the capsular polysaccharide from E. coli O9:K37 (A 84a) has been studied, using methylation analysis, Smith degradation, and graded acid hydrolysis. The configurations at the anomeric centres were assigned by 1H-n.m.r. spectroscopy of the polysaccharide and its derivatives and oligosaccharide fragments. The polysaccharide has the following trisaccharide repeating-unit which is unique in the E. coli series of capsular polysaccharides in possessing a 1-carboxyethylidene group as the sole acidic function. (Formula: see text) E. coli capsular polysaccharides have been classified into seventy-four serotypes. The structures of about twenty of these polysaccharides have been elucidated, one of which, K29, has been reported to contain a 1-carboxyethylidene group. In continuation of a programme aimed at establishing the structural basis for the serology and immunochemistry of the E. coli capsular antigens, we now report on the structure of the capsular polysaccharide from E. coli O9:K37.     

Characterization of monoclonal antibodies that recognize common epitopes located on O antigen of lipopolysaccharide of serotypes 1, 9 and 11 of Actinobacillus pleuropneumoniae

Abstract Seven murine monoclonal antibodies (mAbs) against serotype 1 of Actinobacillus (Haemophilus) pleuropneumoniae (reference strain Shope 4074) were produced and characterized. All hybridomas secreting mAbs were reactive with whole-cell antigens from reference strains of serotypes 1, 9 and 11, except for mAb 5D6 that failed to recognize serotype 9. They did not react with other taxonomically related Gram-negative organisms tested. The predominant isotype was immunoglobulin (Ig) M, although IgG_2a, IgG_2b, and IgG₃ were also obtained. The epitopes identified by these mAbs were resistant to proteinase K treatment and boiling in the presence of sodium dodecyl sulfate and reducing conditions; however, they were sensitive to sodium periodate treatment. Enhanced chemiluminescence-immunodetection assay showed that mAbs could be divided in two groups according to the patterns of immunoreaction observed. Group I (mAbs 3E10, 4B7, 9H5 and 11C3) recognized a ladder-like banding profile consistent with the O antigen of lipopolysaccharide (LPS) from smooth strains. Group II (mAbs 3B10 and 9H1) recognized a long smear of high molecular weight which ranged from 60 to 200 kDa. The mAbs were tested against 96 field isolates belonging to serotypes 1, 5, 9, 11 and 12, which had previously been classified by a combination of serological techniques based on polyclonal rabbit sera (counterimmunoelectrophoresis, immunodiffusion and coagglutination). The panel of mAbs identified all isolates of serotypes 9 and 11, but only 66% of those belonging to serotype 1. This may suggest the existence of antigenic heterogeneity among isolates of A. pleuropneumoniae serotype 1. These mAbs reacted with epitopes common to serotypes 1, 9 and 11 of Actinobacillus pleuropneumoniae which were located on the O antigen of LPS.     

Structural characterization of the antigenic capsular polysaccharide and lipopolysaccharide O-chain produced by Actinobacillus pleuropneumoniae serotype 15.

The specific capsular polysaccharide produced by Actinobacillus pleuropneumoniae serotype 15 was determined to be a high-molecular-mass polymer having [alpha]D + 69 degrees (water) and composed of a linear backbone of phosphate diester linked disaccharide units of 2-acetamido-2-deoxy-D-glucose (D-GlcNAc) and 2-acetamido-2-deoxy-D-galactose (D-GalNAc) residues (1:1). Thirty percent of the D-GalNAc residues were substituted at O-4 by beta-D-galactopyranose (beta-D-Galp) residues. Through the application of chemical and NMR methods, the capsule, which defines the serotype specificity of the bacterium, was found to have the structure [structure: see text]. The O-polysaccharide (O-PS) component of the A. pleuro pneumoniae serotype 15 lipopolysaccharide (LPS) was characterized as a linear unbranched polymer of repeating pentasaccharide units composed of D-glucose (2 parts) and D-galactose (3 parts), shown to have the structure [structure: see text]. The O-PS was chemically identical with the O-antigen previously identified in the LPSs produced by A. pleuro pneumoniae serotypes 3 and 8.     

Structure of the capsular polysaccharide of Actinobacillus pleuropneumoniae serotype 5b.

The capsular polysaccharide of Actinobacillus pleuropneumoniae serotype 5b (strain L20) was found to be a high molecular mass polymer composed of 2-acetamido-2-deoxy-D-glucose, D-glucose, and 3-deoxy-D-manno-octulosonic acid (KDO). Methylation analysis, partial hydrolysis and a combination of homonuclear and 1H-detected heteronuclear shift-correlated nuclear magnetic resonance experiments showed the polysaccharide to be a branched polymer of a trisaccharide repeating unit, having the structure: [formula; see text]     

Somatic antigens of Pseudomonas aeruginosa. The structure of the O-specific polysaccharide chains of lipopolysaccharides of P. aeruginosa serogroup O4 (Lányi) and related serotype O6 (Habs) and immunotype 1 (Fisher)

Acidic O-specific polysaccharides were isolated on mild acidic degradation of lipopolysaccharides of Pseudomonas aeruginosa serotypes O4a,b, O4a,c, O4a,d (Lányi classification) and serologically related to them serotype O6 (Habs classification) and immunotype 1 (Fisher classification). The polysaccharides had identical monosaccharide composition and were built up of L-rhamnose, 2-acetamido-2,6-dideoxy-D-glucose,2-formamido-2-deoxy-D-galacturonic acid and 2-acetamido-2-deoxy-D-galactouronamide residues. The latter two derivatives of D-galactosaminuronic acid were found in nature for the first time. All the polysaccharides, but Lányi serotype O4a,c, contained O-acetyl groups. The polysaccharides were readily de-O-acetylated with aqueous triethylamine and de-N-formylated with dilute hydrochloric acid. De-N-formylated polysaccharide of serotype O4a,c was selectively cleaved with nitrous acid upon 2-amino-2-deoxygalacturonic acid residues to form a tetrasaccharide with a 2,5-anhydrotaluronic acid residue on the reducing end. The tetrasaccharide represented a modified repeating unit of the polysaccharide. Solvolysis of all intact polysaccharides with hydrogen fluoride selectively split the glycosidic linkages of 6-deoxy sugars to give the same trisaccharide, including both derivatives of galactosaminuronic acid and having 2-acetamido-2,6-dideoxyglucose on the reducing end. Structural investigation of the oligosaccharides obtained together with methylation analysis and 13C nuclear magnetic resonance data revealed the following structures of the O-specific polysaccharides: (Formula: see text) An independent confirmation of the structures of the repeating units was obtained as the result of full interpretation of the 13C nuclear magnetic resonance spectra of the intact and modified polymers. Spectral data analysis revealed a number of regularities in the effects of glycosidation connecting their values with the anomeric and absolute configuration of pyranose residues. The data on the structures of the O-specific polysaccharides indicated that each of the five P. aeruginosa strains under study should be considered as an individual O-serotype within one O-serogroup.     

Elucidation of structural and antigenic properties of pneumococcal serotype 11A, 11B, 11C, and 11F polysaccharide capsules

Despite the emerging impact of serogroup 11 serotypes in Streptococcus pneumoniae epidemiology, the structures of serogroup 11 capsule types have not been fully elucidated, particularly the locations of O-acetyl substitutions. Here, we report the complete structures of the serotype 11B, 11C, and 11F polysaccharides and a revision to the serotype 11A capsular polysaccharide using nuclear magnetic resonance (NMR). All structures shared a linear, tetrasaccharide backbone with a pendant phosphopolyalcohol. Three of four saccharides are conserved in all serotypes. The individual serotype capsules differed in the identity of one saccharide, the pendant phosphopolyalcohol, and the O-acetylation pattern. Though the assigned locations of O-acetate substitutions in this study differed from those of previous reports, our findings were corroborated with strong correlations to serology and genetics. We examined the binding of serotyping sera to serogroup 11 polysaccharides by using flow cytometry and an inhibition-type enzyme-linked immunosorbent assay (ELISA) and found that de-O-acetylation of capsular polysaccharides by mild hydrolysis decreases its immunoreactivity, supporting the crucial role of O-acetylation in the antigenicity of these polysaccharides. Due to strong correlations between polysaccharide structures and capsule biosynthesis genes, we were able to assign target substrates for the O-acetyltransferases encoded by wcwC, wcwR, wcwT, and wcjE. We identified antigenic determinants for serogroup 11 serotyping sera and highlight the idea that conventional serotyping methods are not capable of recognizing all putative variants of S. pneumoniae serogroup 11.     

Structure of the capsular polysaccharide of Haemophilus pleuropneumoniae serotype 3

The capsular polysaccharide of Haemophilus pleuropneumoniae serotype 3 (ATCC 27090) is composed of D-galactose (one part), 2-acetamido-2-deoxy-D-glucose (one part), glycerol (one part), and phosphate (one part). From hydrolysis, dephosphorylation, methylation, and 1H and 13C nuclear magnetic resonance studies, the polysaccharide was found to be a high molecular weight polymer of a repeating trisaccharide unit, joined through monophosphate diester linkages and having the following structure: (formula; see text).     

The structure of the specific capsular polysaccharide of Rhodococcus equi serotype 4

The specific capsular polysaccharide produced by Rhodococcus equi serotype 4 was found to be a high-molecular-weight acidic polymer composed of D-glucose, D-mannose, pyruvic acid and a previously unidentified 5-amino-3,5-dideoxynonulosonic (rhodaminic) acid in the proportions 2:1:1:1. Structural analysis, employing a combination of microanalytical methods, nuclear magnetic resonance spectroscopy, and mass spectrometric techniques, established that the polysaccharide consisted of linear repeating tetrasaccharide units having the sequence of residues shown below. In the native polysaccharide, the rhodaminic acid residues were present as their acetamido derivatives (RhoANAc) and carried 1-carboxyethylidene groups that bridged the O-7 and O-9 positions. Treatment of the capsular polysaccharide with dilute acetic acid and/or anhydrous hydrogen fluoride under hydrolytic/solvolytic conditions, resulted in the formation of four different oligosaccharide species. The 1H and 13C NMR resonances of these oligosaccharide fragments and of the native serotype 4 capsular polysaccharides were fully assigned by homo- and heteronuclear chemical shift correlation methods.     

Structural analysis of the O-antigen side chain polysaccharides in the lipopolysaccharides of Klebsiella serotypes O2(2a), O2(2a,2b), and O2(2a,2c).

The lipopolysaccharide (LPS) of Klebsiella serotype O2 is antigenically heterogeneous; some strains express multiple antigenic factors. To study this heterogeneity, we determined the structure of the O-antigen polysaccharides in isolates belonging to serotypes O2(2a), O2(2a,2b), and O2(2a,2c), by using composition analysis, methylation analysis, and both 1H and 13C nuclear magnetic resonance spectroscopy. The repeating unit structure of the 2a polysaccharide was identified as the disaccharide [----3)-beta-D-Galf-(1----3)-alpha-D-Galp-(1----] and was identical to D-galactan I, one of two O polysaccharides present in the LPS of Klebsiella pneumoniae serotype O1 (C. Whitfield, J. C. Richards, M. B. Perry, B. R. Clarke, and L. L. MacLean, J. Bacteriol. 173:1420-1431, 1991). LPS from serotype O2(2a,2b) also contained D-galactan I as the only O polysaccharide, suggesting that the 2b antigen is not an O antigen. The LPS of serotype O2(2a,2c) contained a mixture of two structurally distinct O polysaccharides and provides a second example of this phenomenon in Klebsiella spp. One polymer was identical to D-galactan I, and the other polysaccharide, the 2c antigen, was a polymer with a disaccharide repeating unit structure, [----3)-beta-D-GlcpNAc-(1----5)-beta-D-Galf-(1----]. The 2c structure does not resemble previously reported O polysaccharides from Klebsiella spp. Periodate oxidation confirmed that D-galactan I and the 2c polysaccharide are distinct glycans, rather than representing domains within a single polysaccharide chain. Monoclonal antibodies against the 2c antigen indicated that only LPS molecules with the longest O-polysaccharide chains contained the 2c epitope.     

Structural studies of the capsular polysaccharide from Haemophilus pleuropneumoniae serotype 1

The capsular polysaccharide of Haemophilus pleuropneumoniae serotype 1 (ATCC 27088) was found to be a teichoic acid type polysaccharide of a repeating disaccharide unit composed of 2-acetamido-2-deoxy-D-glucose and D-galactose units. By composition analysis, methylation, partial hydrolysis, dephosphorylation, and one- and two-dimensional 500-MHz proton nuclear magnetic resonance experiments, together with 13C nuclear magnetic resonance studies, it was concluded that the capsular polysaccharide is a high molecular weight linear polymer having the structure: (Formula: see text)     

Nuclear-magnetic-resonance analysis of the capsular antigen of Actinobacillus pleuropneumoniae serotype 9. Its identity with the capsular antigen of Escherichia coli K62 (K2ab), Neisseria meningitidis serogroup H and Pasteurella haemolytica serotype T15.

The specific capsular antigen of Actinobacillus pleuropneumoniae serotype 9 was characterized by one-dimensional and two-dimensional high-field nuclear-magnetic-resonance methods, and by chemical analyses, as a teichoic-acid-type polymer of a repeating unit having the structure [formula: see text] The basic polymer structure is identical to capsular antigens of Neisseria meningitidis group H, Escherichia coli K62 (K2ab) and Pasteurella haemolytica serotype T15.     

Dissection of the Yersinia enterocolitica virulence plasmid pYVO8 into an operating unit and virulence gene modules

Abstract Mesophilic Aeromonas hydrophila from serotypes O:11 and O:34 grown in a glucose-rich medium produce a capsule that can be seen under light and electron microscopy. The purified capsular polysaccharide has a composition qualitatively similar for strains O:11 and O:34, but quantitatively different. The capsular polysaccharides were immunogenic in rabbits, and did not cross-react with specific antibodies against either purified lipopolysaccharide from strains O:34 or O:11 or against the S-layer characteristic of strains from serotype O:11.     

Serological Characterization of Haemophilus Pleuropneumoniae (Actinobacillus Pleuropneumoniae) Strains and Proposal of a New Serotype: Serotype 9

Ten strains of H. pleuropneumoniae isolated from 10 herd outbreaks of pleuropneumonia were studied by means of the slide agglutination test, the indirect haemaggluitiniation (IHA) test and by gel diffusion. The strains were antigenically homogeneous and serologically distinct from serotypes 1 through 8. It is therefore proposed to refer these strains to a new serotype: serotype 9, with strain CVJ 13261 as the type strain. In addition to the serotype-specific capsular antigens, capsular antigen of serotype 1 (strain 4074) could be demonstrated in the 10 strains by means of gel diffusion analyses. In cross protection studies it was shown that the antigenic determinants shared by serotypes 9 and 1 were unable to yield a sufficient protection against disease. Thus, parenteral immunization with a killed 6-h culture of serotype 9 did not afford an acceptable protection against challenge with serotype 1 since only 3 of the 5 vaccinates were protected. The reverse experiment showed that parenteral immunization with serotype 1 only protected 1 out of 4 vaccinates.     

Structure of the polysaccharide O-antigen of Salmonella riogrande O:40 (group R) related to blood group A activity.

The structure of the Salmonella O:40 (Group R) antigen was determined from an analysis of the antigenic O-polysaccharide component of the lipopolysaccharide produced by Salmonella riogrande O:40. Using 1H- and 13C-NMR spectroscopy, methylation analysis, and periodate degradation methods, the O-polysaccharide was found to be a high molecular weight branched polymer of repeating pentasaccharide units having the structure: [formula: see text] The reported human blood group A activity was concluded to reside in an epitope of a terminal trisaccharide portion of the O-chain involving alpha-D-GalpNAc and beta-D-GlcpNAc residues linked (1----3) and (1----2), respectively, to beta-D-Manp branched residues in which the alpha-D-GalpNAc residue would appear to be the critical antigenic factor recognized by polyclonal blood group A antisera.     

Structural studies of the capsular polysaccharide from Haemophilus pleuropneumoniae serotype 2

The capsular polysaccharide of Haemophilus pleuropneumoniae serotype 2 (ATCC 27089) is composed of D-glucose (two parts), D-galactose (one part), glycerol (one part), and phosphate (one part). Hydrolysis, dephosphorylation, methylation, enzymic studies, and 1H and 13C nuclear magnetic resonance experiments showed that the polysaccharide is a high molecular weight polymer of a tetrasaccharide repeating units, linked by monophosphate diester and having the following structure: (Formula: see text).     

Structural elucidation of two capsular polysaccharides from one strain of Bacteroides fragilis using high-resolution NMR spectroscopy.

The capsule of Bacteroides fragilis is unusual in that it consists of two distinct capsular polysaccharides. Using a combination of high-resolution NMR spectroscopy, theoretical calculations, and as few chemical procedures as required, the structure of both polysaccharide antigens (polysaccharides A and B) was elucidated. Using the above procedures, it was possible to obtain the complete structures using minimal quantities of polysaccharides A and B (8 and 5 mg, respectively). Only small amounts of each subjected to chemical analysis were not recoverable. Polysaccharide A is composed of the following repeating unit: [----3)alpha-D-AATp(1----4)[beta-D-Galf(1----3)]alpha-D- GalpNAc(1----3)beta-D-Galp(1----], where AAT is 2-acetamido-4-amino-2,4,6-trideoxygalactose. A pyruvate substituent having the R configuration spans O-4 and O-6 of the beta-D-galactopyranosyl residue. Polysaccharide B is composed of the following repeating unit: [----4)alpha-L-QuipNAc(1----3)beta-D-QuipNAc(1----4)[alpha-L - Fucp(1----2)beta-D-GalpA(1----3)beta-D-GlcpNAc(1----3)]alpha -D-Galp(1----]. A 2-aminoethylphosphonate substituent is situated on O-4 of the N-acetyl-beta-D-glucopyranosyl residue.     

Structure of the 2-keto-3-deoxy-D-manno-octonic-acid-containing capsular polysaccharide (K12 antigen) of the urinary-tract-infective Escherichia coli O4:K12:H-

The primary structure of the K12 antigenic capsular polysaccharide (K12 antigen) of Escherichia coli O4:K12:H- was elucidated by composition, nuclear magnetic resonance spectroscopy, methylation, periodate oxidation and oligosaccharide analysis. The polysaccharide consists of repeating trisaccharide alpha-rhamnosyl-1,2-alpha-rhamnosyl-1,5-dOclA units (dOclA = 2-keto-3-deoxy-D-manno-octonic acid) which are joined through beta-2,3-linkages. About 50% of the dOclA units are O-acetylated at C7 or C8. The sequence of acetylated and non-acetylated dOclA residues is not known. As had been reported before, the polysaccharide is linked to a phosphatidic acid at the reducing end (dOclA) via a phosphodiester bridge. The serologically specific part of the K12 antigen is its polysaccharide moiety.     

Chemo-enzymatic synthesis of a tetra- and octasaccharide fragment of the capsular polysaccharide of Streptococcus pneumoniae type 14

The chemo-enzymatic synthesis is described of tetrasaccharide beta-D-Galp-(1-->4)-beta-D-Glcp-(1-->6)-[beta-D-Galp-(1-->4)]-beta-D-GlcpNAc-(1-->O(CH(2))(6)NH(2) (1) and octasaccharide beta-D-Galp-(1-->4)-beta-D-Glcp-(1-->6)-[beta-D-Galp-(1-->4)]-beta-D-GlcpNAc-(1-->3)-beta-D-Galp-(1-->4)-beta-D-Glcp-(1-->6)-[beta-D-Galp-(1-->4)]-beta-D-GlcpNAc-(1-->O(CH(2))(6)NH(2) (2), representing one and two tetrasaccharide repeating units of Streptococcus pneumoniae serotype 14 capsular polysaccharide. In a chemical approach, the intermediate linear trisaccharide 3 and hexasaccharide 4 were synthesized. Galactose residues were beta-(1-->4)-connected to the internal N-acetyl-beta-D-glucosamine residues by using bovine milk beta-1,4-galactosyltransferase. Both title oligosaccharides will be conjugated to carrier proteins to be tested as potential vaccines in animal models.     

Transfer and expression of the genetic determinants for O and K antigen synthesis in Escherichia coli O9:K(A)30 and Klebsiella sp. O1:K20, in Escherichia coli K12

Escherichia coli serotype O9:K(A)30 and Klebsiella O1:K20 produce thermostable capsular polysaccharides or K antigens, which are chemically and serologically indistinguishable. Plasmid pULB113 (RP4::mini-Mu) has been used to mediate chromosomal transfer from E. coli O9:K30 and Klebsiella O1:K20 to a multiply marked, unencapsulated, E. coli K12 recipient. Analysis of the cell surface antigens of the transconjugants confirmed previous reports that the genetic determinants for the E. coli K(A) antigens are located near the his and rfb (O antigen) loci on the E. coli linkage map. The Klebsiella K20 capsule genes were also found to be in close proximity to the his and rfb loci. Electron microscopy revealed significant differences in the structural organization of capsular polysaccharides in these two microorganisms and the morphological differences were also readily apparent in transconjugants expressing the respective K antigens. These results are consistent with the interpretation that at least some of the organizational properties of capsular polysaccharides may be genetically determined, rather than being a function of the outer membrane to which the capsular polysaccharides are ultimately attached.     

Structure of the capsular polysaccharide of Haemophilus pleuropneumoniae serotype 5

The capsular polysaccharide of Haemophilus (Actinobacillus) pleuropneumoniae serotype 5 (ATCC 33377) was found to be a linear type polysaccharide of a repeating disaccharide unit composed of 2-acetamido-2-deoxy-D-glucose and 3-deoxy-D-manno-2-octulosonic acid (dOclA). By composition analysis, methylation, partial hydrolysis and 1H and 13C nuclear magnetic resonance studies, it was concluded that the capsular polysaccharide is a high-molecular-mass unbranched polymer having the structure: [6)-alpha-D-GlcNAcp-(1-5)-beta-dOclAp-(2]n.