Exchange of histidine spacing between Sp1 and GLI zinc fingers: distinct effect of histidine spacing-linker region on DNA binding

In the DNA recognition mode of C(2)H(2)-type zinc fingers, the finger-finger connection region, consisting of the histidine spacing (HX(3-5)H) and linker, would be important for determining the orientation of the zinc finger domains. To clarify the influence of spacing between two ligand histidines in the DNA binding, we exchanged the histidine spacing between Sp1 and GLI zinc fingers, which have an HX(3)H-TGEKK linker (typical) and an HX(4)H-SNEKP linker (atypical), respectively. A significant decrease in the DNA binding affinity and specificity is found in Sp1-type peptides, whereas GLI-type peptides show a mild reduction. To evaluate the effect of the linker characteristics, we further designed Sp1-type mutants with an SNEKP linker. As a result, the significant effect of the histidine spacing in Sp1-type peptides was reduced. These results demonstrate that (1) the histidine spacing significantly affects the DNA binding of zinc finger proteins and (2) the histidine spacing and the following linker regions are one effective target for regulating the DNA recognition mode of zinc finger proteins.     

DNA-Binding ability of GAGA zinc finger depends on the nature of amino acids present in the beta-hairpin

The GAGA factor of Drosophila melanogaster uses a single Cys2-His2-type zinc finger for specific DNA binding. Comparative sequence alignment of the GAGA zinc finger core with other structurally characterized zinc fingers reveals that the beta-hairpin of the GAGA zinc finger prefers amino acids with an aliphatic side-chain different from those of other zinc fingers. To probe the substitution effect of aromatic amino acids in the beta-hairpin on the DNA binding, three mutant peptides were designed by substituting consensus phenylalanine, an aromatic amino acid, at key positions in the beta-hairpin region. The metal-binding and the overall fold of the mutant peptides are very similar to those of the wild-type as shown by UV-vis absorption spectroscopy and circular dichroism spectroscopy. However, the gel mobility shift assay and isothermal calorimetric studies demonstrated that none of the mutants are able to bind the cognate DNA substrate, although the mutation is confined only to the beta-hairpin region. The present results suggest that the nature of the amino acids in the beta-hairpin plays an important role in the DNA-binding of the GAGA factor protein.     

Site-specific DNA cleavage by artificial zinc finger-type nuclease with cerium-binding peptide

The addition of a new function to native proteins is one of the most attractive protein-based designs. In this study, we have converted a C(2)H(2)-type zinc finger as a DNA-binding motif into a novel zinc finger-type nuclease by connecting two distinct zinc finger proteins (Sp1 and GLI) with a functional linker possessing DNA cleavage activity. As a DNA cleavage domain, we chose an analogue of the metal-binding loop (12 amino acid residues), peptide P1, which has been reported to exhibit a strong binding affinity for a lanthanide ion and DNA cleavage ability in the presence of Ce(IV). Our newly designed nucleases, Sp1(P1)GLI and Sp1(P1G)GLI, can strongly bind to a lanthanide ion and show a unique DNA cleavage pattern, in which certain positions between the two DNA-binding sites are specifically cleaved. The present result provides useful information for expanding the design strategy for artificial nucleases.     

Finger-positional change in three zinc finger protein Sp1: influence of terminal finger in DNA recognition

The connection of functional modules is effective for the design of DNA binding molecules with the desired sequence specificity. C(2)H(2)-type zinc finger proteins have a tandemly repeated array structure consisting of independent finger modules and are expected to recognize any DNA sequences by permutation, multi-connection, and the substitution of various sets of zinc fingers. To investigate the effects of the replacement of the terminal finger on the DNA recognition by other fingers, we have constructed the three zinc finger peptides with finger substitution at the N- or C-terminus, Sp1(zf223), Sp1(zf323), and Sp1(zf321). From the results of gel mobility shift assays, each mutant peptide binds preferentially to the target sequence that is predicted if the fingers act in a modular fashion. The methylation interference analyses demonstrate that in the cases of the N-terminal finger substitution mutants, Sp1(zf223) and Sp1(zf323), the N-terminal finger recognizes bases to different extents from that of the wild-type peptide, Sp1(zf123). Of special interest is the fact that the N-terminal finger of the C-terminal finger substitution mutant, Sp1(zf321), shows a distinct base recognition from those of Sp1(zf123) and Sp1(zf323). DNase I footprinting analyses indicate that the C-terminal finger (active finger) induces a conformational change in the DNA in the region for the binding of the N-terminal finger (passive finger). The present results strongly suggest that the extent of base recognition of the N-terminal finger is dominated by the binding of the C-terminal finger. This information provides an important clue for the creation of a zinc finger peptide with the desired specificity, which is applicable to the design of novel drugs and biological tools.     

Multiconnection of identical zinc finger: implication for DNA binding affinity and unit modulation of the three zinc finger domain

Cys(2)-His(2)-type zinc finger proteins have a tandemly repeated array structure consisting of independent finger modules. They are expected to elevate the DNA binding affinity and specificity by increasing the number of finger modules. To investigate the relation between the number and the DNA binding affinity of the zinc finger, we have designed the two- to four-finger peptides by connecting the central zinc finger (finger 2) of Sp1 with the canonical linker sequence, Thr-Gly-Glu-Lys-Pro. Gel mobility shift assays reveal that the cognate three- and four-finger peptides, Sp1(zf222) and Sp1(zf2222), strongly bind to the predicted target sequences, but the two-finger peptide, Sp1(zf22), does not. Of special interest is the fact that the dissociation constant for Sp1(zf2222) binding to the target DNA is comparable to that for Sp1(zf222). The methylation interference, DNase I and hydroxyl radical footprintings, and circular permutation analyses demonstrate that Sp1(zf2222) binds to its target site with three successive zinc fingers and the binding of the fourth zinc finger is inhibited by DNA bending induced by the binding of the three-finger domain. The present results strongly indicate that the zinc finger protein binds to DNA by the three-finger domain as one binding unit. In addition, this information provides the basis for the design of a novel multifinger protein with high affinity and specificity for long DNA sequences, such as chromosomal DNAs.     

Interconversion between serine and aspartic acid in the alpha helix of the N-terminal zinc finger of Sp1: implication for general recognition code and for design of novel zinc finger peptide recognizing complementary strand

In the typical base recognition mode of the C(2)H(2)-type zinc finger, the amino acid residues at alpha-helical positions -1, 3, and 6 make a contact with the base in one strand (the primary strand), and the residue at position 2 interacts with the base in a complementary strand (the secondary strand). The N-terminal zinc finger of the three-zinc-finger domain of Sp1 has inherently a unique five-base-pair binding mode in which the guanine bases are recognized in both strands. To clarify the effect of the amino acid at position 2 on DNA binding affinity and base specificity, we have created a library of the mutants by the interconversion between serine and aspartic acid in the N-terminal zinc finger of Sp1 and recombinant variants of finger order. Gel mobility shift and methylation interference assays showed that the combination of arginine and serine at positions -1 and 2, respectively, provides a newly strong guanine contact in the secondary strand and a higher binding affinity than that of wild-type Sp1. Of special interest are the facts that the mutant with lysine and aspartic acid at positions -1 and 2 in the alpha helix predominantly recognizes the bases in the secondary strand and that its DNA binding affinity is higher than that of the wild-type. The aspartic acid or serine at position 2 independently contributes to the DNA binding affinity and base specificity. The present results provide useful information for the design of a novel zinc finger protein with priority for the bases in the secondary strand.     

Novel zinc finger nuclease created by combining the Cys2His2- and His4-type zinc finger domains

To improve the DNA hydrolytic activity of the zinc finger nuclease, we have created a new artificial zinc finger nuclease (ZWH4) by connecting two distinct zinc finger domains possessing different types of Zn(II) binding sites (Cys₂His₂- and His₄-types). The overall fold of ZWH4 is similar to that of the wild-type Sp1 zinc finger (Sp1(zf123)) as revealed by circular dichroism spectroscopy. The gel mobility shift assay demonstrated that ZWH4 binds to the GC box DNA, although the DNA-binding affinity is lower than that of Sp1(zf123). Evidently, ZWH4 hydrolyzes the covalently closed circular plasmid DNA (form I) containing the GC box (pBSGC) to the linear duplex DNA (form III) in the presence of a higher concentration (50 times) of the protein than DNA for a 24-h reaction. Of special interest is the fact that the novel mixed zinc finger protein containing the Cys₂His₂- and His₄-type domains was first created. The present results provide the useful information for the redesign strategy of an artificial nuclease based on the zinc finger motif.     

JAZ requires the double-stranded RNA-binding zinc finger motifs for nuclear localization.

We have cloned and characterized a novel zinc finger protein, termed JAZ. JAZ contains four C(2)H(2)-type zinc finger motifs that are connected by long (28-38) amino acid linker sequences. JAZ is expressed in all tissues tested and localizes in the nucleus, primarily the nucleolus. JAZ preferentially binds to double-stranded (ds) RNA or RNA/DNA hybrids rather than DNA. Mutation of individual zinc finger motifs reveals that the zinc finger domains are not only essential for dsRNA binding but are also required for its nucleolar localization, which demonstrates a complex trafficking mechanism dependent on the nucleic acid-binding capability of the protein. Furthermore, forced expression of JAZ potently induces apoptosis in murine fibroblast cells. Thus, JAZ may belong to a class of zinc finger proteins that features dsRNA binding and may regulate cell growth via the unique dsRNA binding properties.     

Importance of a flanking AT-rich region in target site recognition by the GC box-binding zinc finger protein MIG1.

MIG1 is a zinc finger protein that mediates glucose repression in the yeast Saccharomyces cerevisiae. MIG1 is related to the mammalian Krox/Egr, Wilms' tumor, and Sp1 finger proteins. It has two fingers and binds to a GCGGGG motif that resembles the GC boxes recognized by these mammalian proteins. We have performed a complete saturation mutagenesis of a natural MIG1 site in order to elucidate its binding specificity. We found that only three mutations within the GC box retain the ability to bind MIG1: G1 to C, C2 to T, and G5 to A. This result is consistent with current models for zinc finger-DNA binding, which assume that the sequence specificity is determined by base triplet recognition within the GC box. Surprisingly, we found that an AT-rich region 5' to the GC box also is important for MIG1 binding. This AT box is present in all natural MIG1 sites, and it is protected by MIG1 in DNase I footprints. However, the AT box differs from the GC box in that no single base within it is essential for binding. Instead, the AT-rich nature of this sequence seems to be crucial. The fact that AT-rich sequences are known to increase DNA flexibility prompted us to test whether MIG1 bends DNA. We found that binding of MIG1 is associated with bending within the AT box. We conclude that DNA binding by a simple zinc finger protein such as MIG1 can involve both recognition of the GC box and flanking sequence preferences that may reflect local DNA bendability.     

Subsets of the zinc finger motifs in dsRBP-ZFa can bind double-stranded RNA

dsRBP-ZFa is a Xenopus zinc finger protein that binds dsRNA and RNA-DNA hybrids with high affinity and in a sequence-independent manner. The protein consists of a basic N-terminal region with seven C2H2 zinc finger motifs and an acidic C-terminal region that is not required for binding. The last four zinc finger motifs, and the linkers that join them, are nearly identical repeats, while the first three motifs and their linkers are each unique. To identify which regions of the protein are involved in nucleic acid binding, we examined the ability of five protein fragments to bind dsRNA and RNA-DNA hybrids. Our studies reveal that a fragment encompassing the three N-terminal, unique zinc finger motifs and another encompassing the last three of the nearly identical motifs have binding properties similar to the full-length protein. Since these two fragments do not share zinc finger motifs of the same sequence, dsRBP-ZFa must contain more than one type of zinc finger motif capable of binding dsRNA. As with the full-length protein, ssRNA and DNA do not significantly compete for dsRNA binding by the fragments.     

Position effect of cross-strand side-chain interactions on beta-hairpin formation

Previous conformational analysis of 10-residue linear peptides enabled us to identify some cross-strand side-chain interactions that stabilize beta-hairpin conformations. The stabilizing influence of these interactions appeared to be greatly reduced when the interaction was located at the N- and C-termini of these 10-residue peptides. To investigate the effect of the position relative to the turn of favorable interactions on beta-hairpin formation, we have designed two 15-residue beta-hairpin forming peptides with the same residue composition and differing only in the location of two residues within the strand region. The conformational properties of these two peptides in aqueous solution were studied by 1H and 13C NMR. Differences in the conformational behavior of the two designed 15-residue peptides suggest that the influence of stabilizing factors for beta-hairpin formation, in particular, cross-strand side-chain interactions, depends on their proximity to the turn. Residues adjacent to the turn are most efficient in that concern. This result agrees with the proposal that the turn region acts as the driving force in beta-hairpin folding.