Rapid identification of clones using the same degenerate oligonucleotide mixture for both screening and sequencing

A simple and rapid strategy for distinguishing between positively hybridizing colonies and false positive-hybridization signals is described. The isolation of a specific DNA sequence depends on the ability to distinguish between a clone that contains the correct sequence and a false hybridization-positive or background signal. This procedure utilizes the same oligonucleotide mixture both as a screening probe and as a sequencing primer. The mixture of oligonucleotides is used as a primer to obtain sequence information directly from double-stranded DNA. Conditions for sequencing with oligonucleotides having up to 64-fold degeneracy are described. Since the sequence information obtained is directly adjacent to the site of oligonucleotide:DNA hybridization, it is necessary to know only a minimal length of DNA or peptide sequence to both design oligonucleotide probes and confirm the authenticity of the hybridization positives. The advantages of the degenerate oligonucleotide sequencing method include the rapid, reliable identification of authentic versus false hybridization positives made directly without subcloning into single-stranded M13 phage, without sequencing large regions of DNA, or without synthesizing sequence-specific primers.     

Nonradioactive labeling with chemically modified cytosine tails by the polymerase chain reaction.

We developed a modified nonradioactive method for the detection of DNA. This method makes use of the polymerase chain reaction for preparation of probes; that is, a DNA fragment inserted in the polylinker region of an M13 or pUC vector is amplified with primers that have a modified cytosine tail at the 5' terminus (C-tailed primers). By this method, large amounts of labeled probes can be obtained easily. After hybridization, modified cytosine tails can be detected immunologically. DNA labeled by this method could be used in plaque hybridization. We could detect 0.05 pg of dot-blotted labeled DNA in 30 min with an enzyme-catalyzed chemiluminescence reaction.     

Isolation of a specific DNA fragment and development of a PCR-based method for the detection of Mycobacterium genavense

The rise of Mycobacterium genavense infections is making identification ever more important for diagnosis and treatment. Moreover, isolation and identification of M. genavense are made difficult by the lack of growth on solid media and by its low generation rate in BACTEC liquid media. Thus, amplification by PCR or similar techniques represents the only possibility of detecting and identifying M. genavense from tissue samples. In order to set up a simple and species-specific method based on the use of PCR and non-radioactive hybridization technique, we decided to search for and clone a specific DNA fragment of this bacterial species. In the present study, a 1734-bp fragment was isolated. This fragment was found to be highly specific for M. genavense strains. A species-specific pair of primers (MG22 and MG23) and two oligonucleotide probes (MG18 and MG19) were selected. They were successfully used to amplify and detect a 155-bp DNA fragment from the 13 available strains of M. genavense which were isolated from clinical specimens or from birds. Conversely, the primers and probes did not hybridize with DNA from any of the 20 other mycobacterial species tested. It is worth noting that the chosen primers and probes did not hybridize with DNA of M. simiae, although it is closely related to M. genavense. The present PCR technique uses species-specific primers for M. genavense. Followed by a non-radioactive hybridization technique on microplates it is able to distinguish M. genavense from other mycobacteria in one step, without sequencing or restriction analysis. On the basis of the Southern blot hybridization, PCR and sandwich hybridization results, we concluded that the isolated 1.7-kb sequence was specific for the M. genavense chromosome. The method developed here for M. genavense identification uses a simple methodology and commonly available reagents. Furthermore it can be easily automated.     

The making of strand-specific M13 probes

A novel approach has been developed for the preparation of highly radioactive, strand-specific M13 probes. A universal primer, complementary to the region 5' to the multiple cloning sites of M13mp7, was used to initiate the DNA synthesis of the complementary strand of the M13 sequence downstream from the inserted sequence. The synthesis of the (?) strand, which was labeled with a radioactively labeled precursor, did not proceed to completion so that the inserted sequence was kept single-stranded. Thus, a partially double-stranded probe that had the specificity of this inserted sequence was obtained. As an example for the application of single-stranded specific hybridization probes, an M13mp7 subclone of a zein cDNA clone of maize (A30) was labeled and used in a dot hybridization test to select from the hundreds of M13mp7 subclones of the zein genomic clone, 24, the sequences complementary to the probe. The specificity of the probe was confirmed by dideoxy chain terminator sequencing experiments.     

Synthetic oligodeoxyribonucleotide probes for detection of Listeria monocytogenes

A 500-base-pair DNA fragment of a presumptive beta-hemolysin gene of Listeria monocytogenes has been used to identify this organism by a modified colony hybridization technique. We have cloned this DNA fragment into M13 bacteriophage vectors and sequenced it by a dideoxynucleotide sequencing technique. From this sequencing information, several oligodeoxyribonucleotides were synthesized and used as synthetic probes to identify L. monocytogenes. The probes were specific for L. monocytogenes and did not react with any other Listeria strains in a colony hybridization assay. In particular, one of these probes (AD07) was used to detect L. monocytogenes in artificially contaminated raw-milk and soft-cheese samples.     

Synthetic oligodeoxyribonucleotide probes for detection of Listeria monocytogenes.

A 500-base-pair DNA fragment of a presumptive beta-hemolysin gene of Listeria monocytogenes has been used to identify this organism by a modified colony hybridization technique. We have cloned this DNA fragment into M13 bacteriophage vectors and sequenced it by a dideoxynucleotide sequencing technique. From this sequencing information, several oligodeoxyribonucleotides were synthesized and used as synthetic probes to identify L. monocytogenes. The probes were specific for L. monocytogenes and did not react with any other Listeria strains in a colony hybridization assay. In particular, one of these probes (AD07) was used to detect L. monocytogenes in artificially contaminated raw-milk and soft-cheese samples.     

Localization of DNA probes for human ribosomal genes on barley chromosomes]

To estimate the possibility of plant genome mapping using human genome probes, the probes fluorescent in situ hybridization (FISH) of human 18S-28S rDNA (clon 22F9 from the LA-13NCO1 library) was carried out on chromosomes of the spring barley Hordeum vulgare L. As a control, wheat rDNA probe (clon pTa71) was taken. Hybridization of the wheat DNA probe revealed two major labelling sites on mitotic barley chromosomes 5I (7H) and 6I (6H), as well as several minor sites. With the human DNA probe, signals were detected in the major sites of the ribosomal genes on chromosomes 5I (7H) and 6I (6H) only when the chromosome preparations were obtained using an optimized technique with obligatory pepsin treatment followed by hybridization. Thus, this study demonstrates that physical mapping of plant chromosomes with human DNA probes that are 60 to 75% homologous to the plant genes is possible. It suggests principal opportunity for the FISH mapping of plant genomes using probes from human genome libraries, obtained in the course of the total sequencing of the human genomes and corresponding to the coding regions of genes with known functions.     

Localization of Human Ribosomal Gene DNA Probes on Barley Chromosomes

To estimate the possibility of plant genome mapping using human genome probes, the probes fluorescent in situ hybridization (FISH) of human 18S–28S rDNA (clon 22F9 from the LA-13NCO1 library) was carried out on chromosomes of the spring barleyHordeum vulgareL. As a control, wheat rDNA probe (clon pTa71) was taken. Hybridization of the wheat DNA probe revealed two major labelling sites on mitotic barley chromosomes 5I (7H) and 6I (6H), as well as several minor sites. With the human DNA probe, signals were detected in the major sites of the ribosomal genes on chromosomes 5I (7H) and 6I (6H) only when the chromosome preparations were obtained using an optimized technique with obligatory pepsin treatment followed by hybridization. Thus, this study demonstrates that physical mapping of plant chromosomes with human DNA probes that are 60 to 70% homologous to the plant genes is possible. It suggests principal opportunity for the FISH mapping of plant genomes using probes from human genome libraries, obtained in the course of the total sequencing of the human genomes and corresponding to the coding regions of genes with known functions.     

Simple Method for Fluorescence DNA In Situ Hybridization to Squashed Chromosomes

DNA in situ hybridization (DNA ISH) is a commonly used method for mapping sequences to specific chromosome regions. This approach is particularly effective at mapping highly repetitive sequences to heterochromatic regions, where computational approaches face prohibitive challenges. Here we describe a streamlined protocol for DNA ISH that circumvents formamide washes that are standard steps in other DNA ISH protocols. Our protocol is optimized for hybridization with short single strand DNA probes that carry fluorescent dyes, which effectively mark repetitive DNA sequences within heterochromatic chromosomal regions across a number of different insect tissue types. However, applications may be extended to use with larger probes and visualization of single copy (non-repetitive) DNA sequences. We demonstrate this method by mapping several different repetitive sequences to squashed chromosomes from Drosophila melanogaster neural cells and Nasonia vitripennis spermatocytes. We show hybridization patterns for both small, commercially synthesized probes and for a larger probe for comparison. This procedure uses simple laboratory supplies and reagents, and is ideal for investigators who have little experience with performing DNA ISH.     

W (A or T) sequences as probes and primers suitable for genomic mapping and fingerprinting.

A limitation to the use of oligonucleotide probes as tools for genetic and physical mapping has been the low hybridization positive frequency obtained by oligonucleotides of sufficient length to hybridize preferentially to cloned insert DNA (and not host E. coli genomic DNA). Both computer and experimental results now indicate that oligonucleotide probes composed of W (A or T) sequence are preferentially found in eukaryotic DNA, and can be used to provide high frequency, discriminative hybridization. Such W sequences may be useful as either probes or PCR primers in molecular diagnostic applications as well as in genetic and physical mapping.     

Sensitive detection of RNA using strand-specific M13 probes

We have extended the method of Hu and Messing (Gene 17 (1982) 271-277) to prepare highly radioactive M13 probes suitable for use in RNA-DNA hybridization experiments. Single strands of M13 DNA carrying cloned sequences are rendered partially double-stranded by primed synthesis using a synthetic oligonucleotide primer complementary to a region 5' to the cloning site. The newly synthesized radioactive complementary strand is then covalently cross-linked to the M13 phage DNA by UV irradiation in the presence of 4,5,8-trimethylpsoralen (trioxsalen). Since the cross-linked probe is stable to heat denaturation, and the region of cloned sequence is kept single-stranded, these complexes may be used as strand-specific hybridization probes to detect RNA sequences under conditions which would denature DNA-DNA duplexes.     

Rescue of end fragments of yeast artificial chromosomes by homologous recombination in yeast.

Yeast artificial chromosomes (YACs) provide a powerful tool for the isolation and mapping of large regions of mammalian chromosomes. We developed a rapid and efficient method for the isolation of DNA fragments representing the extreme ends of YAC clones by the insertion of a rescue plasmid into the YAC vector by homologous recombination. Two rescue vectors were constructed containing a yeast LYS2 selectable gene, a bacterial origin of replication, an antibiotic resistance gene, a polylinker containing multiple restriction sites, and a fragment homologous to one arm of the pYAC4 vector. The 'end-cloning' procedure involves transformation of the rescue vector into yeast cells carrying a YAC clone, followed by preparation of yeast DNA and transformation into bacterial cells. The resulting plasmids carry end-specific DNA fragments up to 20 kb in length, which are suitable for use as hybridization probes, as templates for direct DNA sequencing, and as probes for mapping by fluorescence in situ hybridization. These vectors are suitable for the rescue of end-clones from any YAC constructed using a pYAC-derived vector. We demonstrate the utility of these plasmids by rescuing YAC-end fragments from a human YAC library.     

Construction of probes for hybridization with hepatitis A virus RNA based on phage M13

Three fragments of a DNA copy complementary to tre hepatitis A virus RNA have been isolated from the pHAV-VPI-22 plasmid and cloned in M 13 mp 8 vector. The 140, 250 and 390 b. p. fragments corresponded to the viral genome fragment coding for VP1 protein. Single-stranded DNAs of the hybrid phages with 250 b. p. and 390 b. p. inserts have been used for radioactive probe synthesis. The specificity of the probes for viral RNA was confirmed in hybridization with hepatitis A virus RNA purified from the virus-infected cell culture. The hybridization was shown to detect up to 10(-12)-10(-13) g of the virus. A principal possibility to use the probes in diagnostic purposes was demonstrated by the virus detection in blood samples obtained from patients with hepatitis A infection.     

Demonstration of spontaneous XX/XY chimerism by DNA fingerprinting

Summary The M13 bacteriophage probe, which makes possible the establishment of DNA fingerprints, was used to study a phenotypically normal woman with a 46XY karyotype and her twin brother. Identical fingerprints and positive hybridzation with a series of Y-specific probes were obtained on blood samples from the siblings. DNA from a skin biopsy of the woman yielded a clearly different pattern and displayed no Y-specific hybridization, indicating that she is a spontaneous chimera. This study illustrates the use of DNA fingerprinting as a powerful and simple aid to the diagnosis of natural chimerism.     

Non-radioactive hybridization probes prepared by the chemical labelling of DNA and RNA with a novel reagent, photobiotin.

A photo-activatable analogue of biotin, N-(4-azido-2-nitrophenyl)-N'-(N-d-biotinyl-3-aminopropyl)-N'-methyl-1,3- propanediamine (photobiotin), has been synthesized and used for the rapid and reliable preparation of large amounts of stable, non-radioactive, biotin-labelled DNA and RNA hybridization probes. Upon brief irradiation with visible light, photobiotin formed stable linkages with single- and double-stranded nucleic acids yielding probes which were purified from excess reagent by 2-butanol extraction and ethanol precipitation. Using single-stranded phage M13 DNA probes chemically labelled with one biotin per 100-400 residues and dot-blot hybridization reactions on nitrocellulose, as little as 0.5 pg (6 X 10(-18) mol) of target DNA was detected colorimetrically by avidin or streptavidin complexes with acid or alkaline phosphatase from three commercial sources. The sensitivity of detection of target RNA in dot-blots and Northern blots was equivalent to that obtained with 32p-labelled DNA probes. Photobiotin was also used for the labelling of proteins with biotin.     

Efficiency in cloning and sequencing using the single-stranded bacteriophage M13

A number of approaches to sequence DNA by the chain termination method are based on cloning into M13 phage vectors and the use of a universal primer. In this paper we investigate some of the factors which influence the speed and efficiency of these approaches. A modification of the template preparation, sequencing reaction, and gel system was used to obtain more reliable and clearer ladder gels. Redundancy and deficiency of shotgun DNA sequencing were reduced by a mapping technique and the use of synthetic primers. The mapping and cloning technique was used to organize the data entry so that the computer time necessary to reconstruct the sequence out of overlaps was reduced.