器壁固定化脂肪酶Pseudomonas cepacia lipase的非水活性与稳定性

许多脂肪酶在有机体系中表现出催化作用,可用于绿色有机合成. 但其催化活性和稳定性明显低于水/油（有机相）界面上的表现. 为了提高脂肪酶在有机反应体系中的活性和稳定性,依据脂肪酶的界面活化机制,以水为酶蛋白构象优化剂、羧甲基纤维素为赋形剂,通过物理吸附的方式,将典型的假单胞菌脂肪酶（Pseudomonas cepacia lipase）固定在锥形瓶的内壁上,形成简易的生物反应器. 为方便检测器壁固定化酶促反应动力学,选择特征吸收为640 nm的生化指示剂2,6-二氯靛酚为反应底物,乙酸乙烯酯为酰化试剂,丙酮为溶剂. 光谱检测表明,催化反应0.5 h后,器壁固定化脂肪酶转化底物的能力是脂肪酶粉的6倍. 在每次催化5 h共10次的循环催化中,器壁固定化脂肪酶的催化活性平均每次仅降低3.2%,而酶粉降低11.8%. 结果表明,该器壁固定化脂肪酶的活性和稳定性相对于酶粉明显提高,这将为通过固定化有效提高脂肪酶的非水催化作用提供重要的参考.     

Kinetics of tributyrin hydrolysis by lipase

The kinetics for the tributyrin hydrolysis using lipase (Pseudomonas fluorscenes CCRC-17015) were investigated in the liquid–liquid and liquid–solid–liquid reaction systems in a batch reactor. The lipase was covalently immobilized onto the surface of porous polymethylacrylamide (PMAA) crosslinking with N,N-methylene biacrylamide with a spacer of ethylenediamine actived by glutaraldehyde. The conditions such as tributyrin concentration, temperature, agitation, and pH value, were evaluated to achieve the optimum reaction conditions for both free lipase and immobilized lipase. The kinetic parameters in the reaction system were also obtained for two reaction systems. The turnover numbers calculated for free lipase and immobilized lipase were 29 and 5.7 s⁻¹, respectively. The parameters of k and k_m obtained using Lineweaver-Burk plot method were 26.2 mol/(mg min) and 1.35 mol/dm³ for free lipase, 5.2 mol/(mg min) and 0.2 mol/dm³ for immobilized lipase, respectively. The experimental results revealed good thermal stability, with greater stability at higher pH value for immobilized lipase in the liquid–solid–liquid reaction.     

Prediction of continuous reactors performance based on batch reactor deactivation kinetics data of immobilized lipase

Experiments on deactivation kinetics of immobilized lipase enzyme fromCandida cylindracea were performed in stirred batch reactor using rice bran oil as the substrate and temperature as the deactivation parameter. The data were fitted in first order deactivation model. The effect of temperature on deactivation rate was represented by Arrhenius equation. Theoretical equations were developed based on pseudo-steady state approximation and Michaelis-Menten rate expression to predict the time course of conversion due to enzyme deactivation and apparent half-life of the immobilized enzyme activity in PFR and CSTR under constant feed rate policy for no diffusion limitation and diffusion limitation of first order. Stability of enzyme in these continuous reactors was predicted and factors affecting the stability were analyzed.     

Lipase kinetics: hydrolysis of triacetin by lipase from Candida cylindracea in a hollow-fiber membrane reactor

The aptitude of a hollow-fiber membrane reactor to determine lipase kinetics was investigated using the hydrolysis of triacetin catalyzed by lipase from Canadida cylindracea as a model system. The binding of the lipase to the membrane appears not to be very specific (surface adsorption), and probably its conformation is hardly altered by immobilization, resulting in an activity comparable to that of the enzyme in its native form. The reaction kinetics defined on the membrane surface area were found to obey Michaelis-Menten kinetics. The specific activity of the lipase in the membrane reactor was found to be significantly higher than in an emulsion reactor. The activity and stability of the enzyme immobilized on a hydrophilic membrane surface seem not to be influenced significantly by the choice of the membrane material. The hollow-fiber membrane reactor is a suitable tool to assess lipase kinetics in a fast and convenient way.     

脱脂棉固定化脂肪酶的非水活性与稳定性

脂肪酶具有非水催化作用,但其非水催化活性和稳定性需进一步提高,这是非水酶学的瓶颈问题之一。理想的策略是模拟脂肪酶的界面活化机制,以大分子代替水,优化、稳定化和有效分散酶蛋白,阻止其在有机相中变性。因此,选用多羟基、比表面积大、惰性、且与酶蛋白能兼容的大分子--脱脂棉纤维,作为固定化载体,以1∶0.9的质量比,通过物理吸附,将假单胞菌脂肪酶(Pseudomonas cepacia lipase)固定在脱脂棉纤维上。在催化己醇与乙酸乙烯酯的转酯反应中,反应1 h,脱脂棉固定化脂肪酶转化底物的能力是酶粉的3.7倍。在每次6 h共6次的循环催化中,固定化酶和酶粉转化底物的能力分别平均每次降低约0.3%和2.4%。表明脱脂棉固定化脂肪酶的非水活性,尤其是稳定性明显提高。这为通过固定化有效提高脂肪酶的非水催化作用,以满足工业应用的需要,提供了一种有效的途径和重要参考。     

海藻糖对脂肪酶的保护机理及酶失活动力学

采用自制的磁性固定化酶(MIE),考察了高温下二糖类对酶的保护作用。结果显示:海藻糖对悬浮于水溶液中的MIE没有保护作用;而在高温干燥后,对酶的保护作用效果依次为:海藻糖>乳糖>蔗糖,支持‘玻璃态学说’;此外,采用两步失活动力学模型能够较好的拟合酶的失活过程,并且得到酶的失活速率常数k和半衰期t1/2,加入海藻糖和乳糖之后,MIE的半衰期分别增长了31和23倍。     

脂肪酶在微乳液和微乳液凝胶中催化辛酸辛醇的酯化反应

脂肪酶在合成反应中具有很高的区域选择性和立体选择性 ,已广泛用于食品工业和药物工业[1,2 ] ,在有机介质中的脂肪酶催化反应已有较多研究[3 ,4 ] 。微乳液一般由表面活性剂、助表面活性剂、油和水等组份组成 ,它是一种热力学稳定、光学透明、宏观均匀而微观不均匀的体系 ,能提供酶催化所需要的巨大油 /水界面[5] 。而将脂肪酶增溶于油包水(Ｗ /Ｏ)微乳液中的纳米级“水池”中 ,可使酶以分子水平分散[6] ,图 1(ａ) ,从而可用来模拟细胞微环境中的反应。油包水微乳液中的酶可通过加入明胶而制成固定化酶 ,含明胶的微乳液凝胶 (ＭＢＧｓ)最早…     

Hydrolysis of crambe oil by enzymatic catalysis: An evaluation of the operational conditions

Abstract

In this work, the enzymatic hydrolysis of the crambe oil by using a commercial immobilized lipase Lipozyme RM IM was evaluated. The effect of the operational conditions, such as temperature, water/oil molar ratio, enzyme/substrate mass ratio and stirring speed were assessed based on the experimental designs. The experiments were performed in a closed and batch system with controlled temperature and stirring speed. In addition, the kinetics of the process was studied in the best operational conditions, wherein the experimental data were obtained and described by a mathematical model. The influence of the operational conditions was assessed based on the measured values of the free fatty acids (FFA) produced by the enzymatic hydrolysis. In 4?h of reaction, a yield of 42.6% was observed and the most significant operational conditions were the enzyme/substrate mass ratio and stirring speed. By the kinetic investigation, an initial reaction rate of 3.5?×?10⁴?mol?mL^?1?h^?1 and a maximum yield of 74% were observed after 40?h of reaction (in the equilibrium condition). The mathematical model was not only able to adequately describe the experimental data of FFA concentrations profiles but also showed predictive capacity to independents assays in different operational conditions. Therefore, based on the simulation analysis of the enzymatic hydrolysis of the crambe oil, the model can be useful for process optimization and phenomenological studies.     

Enzymatic resolution of (S)-(+)-naproxen in a continuous reactor

An enzymatic method for the continuous production of (S)-(+)-2-(6-methoxy-2-naphthyl) propionic acid (Naproxen) has been developed. The process consists of a stereoselective hydrolysis of the racemic Naproxen ethoxyethyl ester catalyzed by Candida cylindracea lipase. The reaction has been carried out in a continuous-flow closed-loop column bioreactor packed with Amberlite XAD-7, a slightly polor resin on which the lipase has been immobilized by adsorption. Various immobilization conditions as well as the properties of the immobilized lipase have been studied. The performance and the productivity of the bioreactor were evaluated as a function of the critical reaction parameters such as temperature, substrate concentration, and product inhibition. By using a 500-mL column bioreactor, 1.8 kg of optically pure (S)-(+)-Naproxen were produced after 1200 h of continuous operation with a slight loss of the enzymatic activity.     

溶胶凝胶法固定化黑曲霉脂肪酶的性质研究

近年来溶胶-凝胶法固定脂肪酶已成为研究热点。选用TMOS、MTMS、ETMS和PTMS 4种硅烷试剂对黑曲霉脂肪酶进行了固定化研究。固定化的最佳配方为ETMS/TMOS=5：1、水与硅烷试剂分子比为8;固定化脂肪酶的固定率为80.2%、相对活性为136.3%;以乳化橄榄油作为底物,在50℃和pH4.0的条件下,固定化脂肪酶与游离脂肪酶K_m分别为1.899×10^-4M和2.789×10^-4M;最适反应pH均为pH4.0,固定化脂肪酶在pH4.0~pH5.5之间其活性能保持95%以上;固定化脂肪酶最适反应温度为60℃,较游离脂肪酶提高了10℃;固定化脂肪酶的酸碱稳定性和热稳定性较非固定化酶有显著的提高。固定化脂肪酶的使用寿命和保存稳定性良好,使用12次后仍能够保留71.7%活性,在室温避光条件下保存180天后仍可保留79.2%活性。     

Effect of enzyme dehydration on alcalase‐catalyzed dipeptide synthesis in near‐anhydrous organic media

The effect of enzyme dehydration by molecular sieves on the coupling of phenylalanine amide and the carbamoylmethyl ester of N‐protected phenylalanine in near‐anhydrous tetrahydrofuran was investigated. This coupling was catalyzed by Alcalase covalently immobilized onto macroporous acrylic beads (Cov); these immobilized enzymes were hydrated prior to use. The dehydration kinetics of Cov by molecular sieve powder were determined by incubating Cov with different amounts of molecular sieve powder for different periods of time (0–80 h). Subsequently, the remaining coupling activity of Cov was measured. Dehydration‐induced inactivation of Cov by molecular sieve powder was found to occur in three phases: (1) an initial, rapid, major dehydration‐induced inactivation that takes place during the first activity measurement, (2) a phase of first‐order inactivation, and (3) a plateau phase in activity. These dehydration kinetics were incorporated into a previously found reaction kinetics model. The resulting model was then used to fit progress curve data of the coupling in the presence of different amounts of molecular sieve powder. Upon establishment of parameter values, the model was used to predict independent data sets and found to work well. © 2013 American Institute of Chemical Engineers Biotechnol. Prog., 29:870–875, 2013     

Comparison of soluble and immobilized trypsin kinetics: Implications for peptide synthesis

The protease trypsin was immobilized to porous glass in both the presence and absence of acetylated soybean trypsin inhibitor (STI) to determine whether immobilization could alter enzyme activity in favor of aminolysis over hydrolysis. Actiive-site titration with 4-methylumbelliferylguanidinobenzoate (MUGB) showed that only about 10% of immobilized trypsin had catalytic activity. Immobilization in the presence of STI produced a higher yield of active enzyme accessible to the inhibitor but did not increase the total yield of MUGB-active immobilized enzyme. Thus, enzyme inactivation upon immobilization could not be attributed to an inaccessible enzyme orientation, nor did STI prevent inactivation by stabilizing the active-site conformation. Kinetic parameters were determined for soluble and immobilized trypsin for two esters, N-tosyl-L-arginine methyl ester (TAME) and N-benzoyl-L-arginine ethyl ester (BAEE), and two amides, N-benzoyl-L-arginine p-nitroanilide (BAPNA) and N-t-boc-leucylglycylarginine p-nitroanilide (LGRNA). In all cases, immobilization caused a greater decrease in k(cat) for amidase activity than for esterase activity. The ratio [k(cat)/ K(m) (ester)]/[k(cat)/K(m) (amide)] increased slightly or stayed the same (for I.GRNA) or decreased sharply (for BAPNA). Including STI during immobilization had little effect on the active enzyme's intrinsic kinetics. A direct comparison of energy diagrams and free energies of activation for BAEE and BAPNA indicates that immobilization raises the free energy barriers for both amide and ester hydrolysis and lowers the energy barrier for aminolysis. In practice, these effects should lower the amidase activity and increase the aminolysis-hydrolysis ratio, rendering the immobilized enzyme a more efficient catalyst for peptide synthesis. (c) 1993 John Wiley & Sons, Inc.     

Lipase adsorption on woven nylon-6 membrane: Optimization,kinetic and thermodynamic analyses

Abstract

Candida rugosa lipase was immobilized on the activated nylon-6 membrane using 0.5% glutaraldehyde as cross-linking agent. The immobilized lipase had an improved temperature and pH stability and exhibited good reusability. The adsorption process followed pseudo-second order rate equation and the biosorption isotherms correlated well with the Langmuir isotherm model. Negative ΔG indicated the adsorption process was spontaneous and the positive ΔH indicated that the adsorption was endothermic. The standard entropy ΔS value was also positive, which suggested an increase in the freedom of the system.     

Immobilisation procedure and reaction conditions for optimal performance of Candida antarctica lipase B in transesterification and hydrolysis

Abstract

The reaction kinetics of Candida antarctica lipase B (CalB) in the commercially available preparation Novozym^® 435 (N435) were compared to those of preparations of CalB immobilised on Accurel^® MP1000 (porous polypropylene). Two polypropylene preparations were made using enzyme loadings of 0.2% and 2% (w/w). All three preparations were used in hydrolysis as well as transesterification of two substrates, ethyl acrylate and ethyl methacrylate with octanol. Reactions carried out at water activity levels from 0.06 to 0.96 and at octanol concentrations between 25 and 500 mM showed that both water and octanol can inhibit CalB. Pronounced mass transfer limitations were also observed, which were more pronounced for N435 than for the two MP1000 preparations. The MP1000 preparations could thus use the lipase more efficiently in these reactions, achieving a specific activity (per g enzyme) between 5 and 20 times that of N435. To achieve high rates in the transesterification reaction, it is recommended to use low water activity and moderate alcohol concentration. In order to carry out a hydrolysis reaction, an intermediate water activity should be used to balance the effects of water as a limiting substrate and as a competitive inhibitor.     

Morphological, biochemical and kinetic properties of lipase from Candida rugosa immobilized in zirconium phosphate

Zirconium phosphate (ZrP), a low-cost inorganic material with well-defined physicochemical properties, was successfully used as support for immobilizing Candida rugosa lipase by covalent bonding. The immobilized derivative showed high catalytic activity in both aqueous and non-aqueous media. Fourier transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy measurements demonstrated that the ZrP fulfilled the morphological requirements for use as a matrix for immobilizing lipases. The free and immobilized lipases were compared in terms of pH, temperature and thermal stability. The immobilized lipase had a higher pH optimum (7.5) and higher optimum temperature (50°C) than the free lipase. Immobilization also increased the thermal stability. The hydrolysis of p-nitrophenyl palmitate (pNPP) by immobilized lipase, examined at 37°C, followed Michaelis-Menten kinetics. Values for K_m=1.18 µM and V_max=325Umg^-1 indicated that the immobilized system was subject to mass transfer limitations. The immobilized derivative was also tested under repetitive reaction batches in both ester hydrolysis and synthesis.     

Enzymic interesterification of fats: The effect of non-lipase material on immobilized enzyme activity

An immobilized lipase (triacylglycerol acylhydrolase, EC 3.1.1.3) suitable for fat interesterification has been prepared by precipitation onto diatomaceous earth (Celite) with acetone of a crude lipase preparation from an Aspergillus. Non-lipase material present in the preparation which precipitated at high acetone concentrations or ovalbumin added prior to the immobilization reduced the measured interesterification activity without affecting lipolytic activity. The non-lipase material reduced the interesterification activity by as much as 50%. The interesterification activity of immobilized preparations was enhanced by the use of higher concentrations of the crude lipase or, more substantially, by admixture of purified lipase.     

Immobilization of lipase from Candida rugosa on a polymer support

Lipase from Candida rugosa was immobilized by adsorption onto a macroporous copolymer support. Under optimum conditions the maximum amount of protein bound was 15.4 mg/g and the immobilization efficiency was 62%. The kinetics of lipase binding to the selected polymer carrier was assessed by using a general model of topochemical reactions. The effect of temperature on adsorption was thoroughly investigated, as was the adsorption mechanism itself. Analysis of the proposed kinetic model and the specific kinetic parameters measured suggest that surface kinetics control the adsorption process. According to the activation energy (E _a) and the rate constant, k, the enzyme has rather a high affinity for the support's active sites. The immobilized enzyme was used to catalyse the hydrolysis of palm oil in a lecithin/isooctane reaction system, in which the enzyme's activity was 70% that of the free enzyme. Kinetic parameters such as maximum velocity (V _max) and the Michaelis constant (K _m) were determined for the free and the immobilized lipase. Following repeated use, the immobilized lipase retained 56% of its initial activity after the fifth hydrolysis cycle. Received: 3 April 1998 / Received revision: 28 July 1998 / Accepted: 29 July 1998     

Characterization of <Emphasis Type="Italic">Mucor miehei</Emphasis> lipase immobilized on polysiloxane-polyvinyl alcohol magnetic particles

Mucor miehei lipase was immobilized on magnetic polysiloxane-polyvinyl alcohol particles by covalent binding. The resulting immobilized biocatalyst was recycled by seven assays, with a retained activity around 10% of its initial activity. K_m and V_max were respectively 228.3 M and 36.1 U mg of protein^–1 for immobilized enzyme. Whereas the optimum temperature remained the same for both soluble and immobilized lipase (45 °C), there was a shift in pH profiles after immobilization. Optimum pH for the immobilized lipase was 8.0. Immobilized enzyme showed to be more resistant than soluble lipase when assays were performed out of the optimum temperature or pH.     

Lipase immobilized on hydrophobic porous polymer supports prepared by concentrated emulsion polymerization and their activity in the hydrolysis of triacylglycerides

Microporous polymer supports for the immobilization of lipase have been prepared by the polymerization of a concentrated emulsion precursor. The concentrated emulsion consists of a mixture of styrene and divinyl-benzene containing a suitable surfactant and an initiator as the continuous phase and water as the dispersed phase. The volume fraction of the latter phase was greater than 0.74, which is the volume fraction of the dispersed phase for the most compact arrangement of spheres of equal radius. The lipase from Candida rugosa has been immobilized on the internal surface of the hydrophobic microporous poly(styrene-divinyl benzene) supports and used as biocatalysts for the hydrolysis of triacylglycerides. The effects of the amount of surfactant, of the molar ratio of divinylbenzene/styrene in the continuous phase, and of the aquaphilicity of the supports on the adsorption, activity, and stability of the immobilized lipase have been investigated. The microporous poly(styrene-divinylbenzene) adsorbents constitute excellent supports for lipase because both the amount adsorbed is large and the rate of enzymatic reaction per molecule of lipase is higher for the immobilized enzyme than for the free one. (c) 1993 John Wiley & Sons, Inc.     

Immobilization of Burkholderia sp. lipase on a ferric silica nanocomposite for biodiesel production

In this work, lipase produced from an isolated strain Burkholderia sp. C20 was immobilized on magnetic nanoparticles to catalyze biodiesel synthesis. Core-shell nanoparticles were synthesized by coating Fe(3)O(4) core with silica shell. The nanoparticles treated with dimethyl octadecyl [3-(trimethoxysilyl) propyl] ammonium chloride were used as immobilization supporters. The Burkholderia lipase was then bound to the synthesized nanoparticles for immobilization. The protein binding efficiency on alkyl-functionalized Fe(3)O(4)-SiO(2) was estimated as 97%, while the efficiency was only 76% on non-modified Fe(3)O(4)-SiO(2). Maximum adsorption capacity of lipase on alkyl-functionalized Fe(3)O(4)-SiO(2) was estimated as 29.45 mg g(-1) based on Langmuir isotherm. The hydrolytic kinetics (using olive oil as substrate) of the lipase immobilized on alkyl-grafted Fe(3)O(4)-SiO(2) followed Michaelis-Menten model with a maximum reaction rate and a Michaelis constant of 6251 Ug(-1) and 3.65 mM, respectively. Physical and chemical properties of the nanoparticles and the immobilized lipase were characterized by Brunauer-Emmett-Teller (BET) analysis, scanning electron microscope (SEM), and Fourier transform infrared spectroscopy (FT-IR). Moreover, the immobilized lipase was used to catalyze the transesterification of olive oil with methanol to produce fatty acid methyl esters (FAMEs), attaining a FAMEs conversion of over 90% within 30 h in batch operation when 11 wt% immobilized lipase was employed. The immobilized lipase could be used for ten cycles without significant loss in its transesterification activity.