Evaluating bias-reducing protocols for RNA sequencing library preparation

Background

Next-generation sequencing does not yield fully unbiased estimates for read abundance, which may impact on the conclusions that can be drawn from sequencing data. The ligation step in RNA sequencing library generation is a known source of bias, motivating developments in enzyme technology and library construction protocols. We present the first comparison of the standard duplex adaptor protocol supplied by Life Technologies for use on the Ion Torrent PGM with an alternate single adaptor approach involving CircLigase (CircLig protocol).A correlation between over-representation in sequenced libraries and degree of secondary structure has been reported previously, therefore we also investigated whether bias could be reduced by ligation with an enzyme that functions at a temperature not permissive for such structure.

Results

A pool of small RNA fragments of known composition was converted into a sequencing library using one of three protocols and sequenced on an Ion Torrent PGM. The CircLig protocol resulted in less over-representation of specific sequences than the standard protocol. Over-represented sequences are more likely to be predicted to have secondary structure and to co-fold with adaptor sequences. However, use of the thermostable ligase Methanobacterium thermoautotrophicum RNA ligase K97A (Mth K97A) was not sufficient to reduce bias.

Conclusions

The single adaptor CircLigase-based approach significantly reduces, but does not eliminate, bias in Ion Torrent data. Ligases that function at temperatures to remove the possible influence of secondary structure on library generation may be of value, although Mth K97A is not effective in this case.

Electronic supplementary material

The online version of this article (doi:10.1186/1471-2164-15-569) contains supplementary material, which is available to authorized users.     

Small RNAs from plants,bacteria and fungi within the order Hypocreales are ubiquitous in human plasma

Background

The human microbiome plays a significant role in maintaining normal physiology. Changes in its composition have been associated with bowel disease, metabolic disorders and atherosclerosis. Sequences of microbial origin have been observed within small RNA sequencing data obtained from blood samples. The aim of this study was to characterise the microbiome from which these sequences are derived.

Results

Abundant non-human small RNA sequences were identified in plasma and plasma exosomal samples. Assembly of these short sequences into longer contigs was the pivotal novel step in ascertaining their origin by BLAST searches. Most reads mapped to rRNA sequences. The taxonomic profiles of the microbes detected were very consistent between individuals but distinct from microbiomes reported at other sites. The majority of bacterial reads were from the phylum Proteobacteria, whilst for 5 of 6 individuals over 90% of the more abundant fungal reads were from the phylum Ascomycota; of these over 90% were from the order Hypocreales. Many contigs were from plants, presumably of dietary origin. In addition, extremely abundant small RNAs derived from human Y RNAs were detected.

Conclusions

A characteristic profile of a subset of the human microbiome can be obtained by sequencing small RNAs present in the blood. The source and functions of these molecules remain to be determined, but the specific profiles are likely to reflect health status. The potential to provide biomarkers of diet and for the diagnosis and prognosis of human disease is immense.

Electronic supplementary material

The online version of this article (doi:10.1186/1471-2164-15-933) contains supplementary material, which is available to authorized users.     

Scalable transcriptome preparation for massive parallel sequencing

Background

The tremendous output of massive parallel sequencing technologies requires automated robust and scalable sample preparation methods to fully exploit the new sequence capacity.

Methodology

In this study, a method for automated library preparation of RNA prior to massively parallel sequencing is presented. The automated protocol uses precipitation onto carboxylic acid paramagnetic beads for purification and size selection of both RNA and DNA. The automated sample preparation was compared to the standard manual sample preparation.

Conclusion/Significance

The automated procedure was used to generate libraries for gene expression profiling on the Illumina HiSeq 2000 platform with the capacity of 12 samples per preparation with a significantly improved throughput compared to the standard manual preparation. The data analysis shows consistent gene expression profiles in terms of sensitivity and quantification of gene expression between the two library preparation methods.     

AllelicImbalance: an R/ bioconductor package for detecting,managing, and visualizing allele expression imbalance data from RNA sequencing

Background

One aspect in which RNA sequencing is more valuable than microarray-based methods is the ability to examine the allelic imbalance of the expression of a gene. This process is often a complex task that entails quality control, alignment, and the counting of reads over heterozygous single-nucleotide polymorphisms. Allelic imbalance analysis is subject to technical biases, due to differences in the sequences of the measured alleles. Flexible bioinformatics tools are needed to ease the workflow while retaining as much RNA sequencing information as possible throughout the analysis to detect and address the possible biases.

Results

We present AllelicImblance, a software program that is designed to detect, manage, and visualize allelic imbalances comprehensively. The purpose of this software is to allow users to pose genetic questions in any RNA sequencing experiment quickly, enhancing the general utility of RNA sequencing. The visualization features can reveal notable, non-trivial allelic imbalance behavior over specific regions, such as exons.

Conclusions

The software provides a complete framework to perform allelic imbalance analyses of aligned RNA sequencing data, from detection to visualization, within the robust and versatile management class, ASEset.

Electronic supplementary material

The online version of this article (doi:10.1186/s12859-015-0620-2) contains supplementary material, which is available to authorized users.     

Building the sugarcane genome for biotechnology and identifying evolutionary trends

Background

Sugarcane is the source of sugar in all tropical and subtropical countries and is becoming increasingly important for bio-based fuels. However, its large (10 Gb), polyploid, complex genome has hindered genome based breeding efforts. Here we release the largest and most diverse set of sugarcane genome sequences to date, as part of an on-going initiative to provide a sugarcane genomic information resource, with the ultimate goal of producing a gold standard genome.

Results

Three hundred and seventeen chiefly euchromatic BACs were sequenced. A reference set of one thousand four hundred manually-annotated protein-coding genes was generated. A small RNA collection and a RNA-seq library were used to explore expression patterns and the sRNA landscape. In the sucrose and starch metabolism pathway, 16 non-redundant enzyme-encoding genes were identified. One of the sucrose pathway genes, sucrose-6-phosphate phosphohydrolase, is duplicated in sugarcane and sorghum, but not in rice and maize. A diversity analysis of the s6pp duplication region revealed haplotype-structured sequence composition. Examination of hom(e)ologous loci indicate both sequence structural and sRNA landscape variation. A synteny analysis shows that the sugarcane genome has expanded relative to the sorghum genome, largely due to the presence of transposable elements and uncharacterized intergenic and intronic sequences.

Conclusion

This release of sugarcane genomic sequences will advance our understanding of sugarcane genetics and contribute to the development of molecular tools for breeding purposes and gene discovery.

Electronic supplementary material

The online version of this article (doi:10.1186/1471-2164-15-540) contains supplementary material, which is available to authorized users.     

Discovery of transgene insertion sites by high throughput sequencing of mate pair libraries

Background

Transgenesis by random integration of a transgene into the genome of a zygote has become a reliable and powerful method for the creation of new mouse strains that express exogenous genes, including human disease genes, tissue specific reporter genes or genes that allow for tissue specific recombination. Nearly 6,500 transgenic alleles have been created by random integration in embryos over the last 30 years, but for the vast majority of these strains, the transgene insertion sites remain uncharacterized.

Results

To obtain a complete understanding of how insertion sites might contribute to phenotypic outcomes, to more cost effectively manage transgenic strains, and to fully understand mechanisms of instability in transgene expression, we’ve developed methodology and a scoring scheme for transgene insertion site discovery using high throughput sequencing data.

Conclusions

Similar to other molecular approaches to transgene insertion site discovery, high-throughput sequencing of standard paired-end libraries is hindered by low signal to noise ratios. This problem is exacerbated when the transgene consists of sequences that are also present in the host genome. We’ve found that high throughput sequencing data from mate-pair libraries are more informative when compared to data from standard paired end libraries. We also show examples of the genomic regions that harbor transgenes, which have in common a preponderance of repetitive sequences.

Electronic supplementary material

The online version of this article (doi:10.1186/1471-2164-15-367) contains supplementary material, which is available to authorized users.     

Is the whole greater than the sum of its parts? De novo assembly strategies for bacterial genomes based on paired-end sequencing

Background

Whole genome sequence construction is becoming increasingly feasible because of advances in next generation sequencing (NGS), including increasing throughput and read length. By simply overlapping paired-end reads, we can obtain longer reads with higher accuracy, which can facilitate the assembly process. However, the influences of different library sizes and assembly methods on paired-end sequencing-based de novo assembly remain poorly understood.

Results

We used 250 bp Illumina Miseq paired-end reads of different library sizes generated from genomic DNA from Escherichia coli DH1 and Streptococcus parasanguinis FW213 to compare the assembly results of different library sizes and assembly approaches. Our data indicate that overlapping paired-end reads can increase read accuracy but sometimes cause insertion or deletions. Regarding genome assembly, merged reads only outcompete original paired-end reads when coverage depth is low, and larger libraries tend to yield better assembly results. These results imply that distance information is the most critical factor during assembly. Our results also indicate that when depth is sufficiently high, assembly from subsets can sometimes produce better results.

Conclusions

In summary, this study provides systematic evaluations of de novo assembly from paired end sequencing data. Among the assembly strategies, we find that overlapping paired-end reads is not always beneficial for bacteria genome assembly and should be avoided or used with caution especially for genomes containing high fraction of repetitive sequences. Because increasing numbers of projects aim at bacteria genome sequencing, our study provides valuable suggestions for the field of genomic sequence construction.

Electronic supplementary material

The online version of this article (doi:10.1186/s12864-015-1859-8) contains supplementary material, which is available to authorized users.     

Enhanced methods for unbiased deep sequencing of Lassa and Ebola RNA viruses from clinical and biological samples

We have developed a robust RNA sequencing method for generating complete de novo assemblies with intra-host variant calls of Lassa and Ebola virus genomes in clinical and biological samples. Our method uses targeted RNase H-based digestion to remove contaminating poly(rA) carrier and ribosomal RNA. This depletion step improves both the quality of data and quantity of informative reads in unbiased total RNA sequencing libraries. We have also developed a hybrid-selection protocol to further enrich the viral content of sequencing libraries. These protocols have enabled rapid deep sequencing of both Lassa and Ebola virus and are broadly applicable to other viral genomics studies.

Electronic supplementary material

The online version of this article (doi:10.1186/s13059-014-0519-7) contains supplementary material, which is available to authorized users.     

IPred - integrating ab initio and evidence based gene predictions to improve prediction accuracy

Background

Gene prediction is a challenging but crucial part in most genome analysis pipelines. Various methods have evolved that predict genes ab initio on reference sequences or evidence based with the help of additional information, such as RNA-Seq reads or EST libraries. However, none of these strategies is bias-free and one method alone does not necessarily provide a complete set of accurate predictions.

Results

We present IPred (Integrative gene Prediction), a method to integrate ab initio and evidence based gene identifications to complement the advantages of different prediction strategies. IPred builds on the output of gene finders and generates a new combined set of gene identifications, representing the integrated evidence of the single method predictions.

Conclusion

We evaluate IPred in simulations and real data experiments on Escherichia Coli and human data. We show that IPred improves the prediction accuracy in comparison to single method predictions and to existing methods for prediction combination.

Electronic supplementary material

The online version of this article (doi:10.1186/s12864-015-1315-9) contains supplementary material, which is available to authorized users.     

MT-Toolbox: improved amplicon sequencing using molecule tags

Background

Short oligonucleotides can be used as markers to tag and track DNA sequences. For example, barcoding techniques (i.e. Multiplex Identifiers or Indexing) use short oligonucleotides to distinguish between reads from different DNA samples pooled for high-throughput sequencing. A similar technique called molecule tagging uses the same principles but is applied to individual DNA template molecules. Each template molecule is tagged with a unique oligonucleotide prior to polymerase chain reaction. The resulting amplicon sequences can be traced back to their original templates by their oligonucleotide tag. Consensus building from sequences sharing the same tag enables inference of original template molecules thereby reducing effects of sequencing error and polymerase chain reaction bias. Several independent groups have developed similar protocols for molecule tagging; however, user-friendly software for build consensus sequences from molecule tagged reads is not readily available or is highly specific for a particular protocol.

Results

MT-Toolbox recognizes oligonucleotide tags in amplicons and infers the correct template sequence. On a set of molecule tagged test reads, MT-Toolbox generates sequences having on average 0.00047 errors per base. MT-Toolbox includes a graphical user interface, command line interface, and options for speed and accuracy maximization. It can be run in serial on a standard personal computer or in parallel on a Load Sharing Facility based cluster system. An optional plugin provides features for common 16S metagenome profiling analysis such as chimera filtering, building operational taxonomic units, contaminant removal, and taxonomy assignments.

Conclusions

MT-Toolbox provides an accessible, user-friendly environment for analysis of molecule tagged reads thereby reducing technical errors and polymerase chain reaction bias. These improvements reduce noise and allow for greater precision in single amplicon sequencing experiments.

Electronic supplementary material

The online version of this article (doi:10.1186/1471-2105-15-284) contains supplementary material, which is available to authorized users.