Purification and properties of the thermostable acid protease of Penicillium duponti.

An acid protease produced by the thermophilic fungus Penicillium duponti K 1014 has been purified by consecutive ion-exchange and gel permeation chromatography, and crystallized from aqueous acetone solution. The purified endopeptidase gave a symmetrical schlieren peak by sedimentation velocity, and was found to be homogeneous upon disc gel electrophoresis at pH 9.5. The enzyme was most active at pH 2.5 against milk casein and showed high thermostability. An isoelectric point of 3.81 was found by isoelectric focusing. A minimum molecular weight of 41 590 was calculated from the amino acid composition, adopting an arginine content of one residue per mole of enzyme. This minimum molecular weight is in good agreement with the value of 41 000 previously found by gel permeation (Hashimoto, H., Iwaasa, T., and Yokotsuka, T. (1973), Appl. Microbiol. 25, 578). Besides the thermostability, the purified P. duponti protease differs from other well-characterized acid proteases in that it contains carbohydrate, 4.33% expressed as glucose. The enzyme was not affected by p-bromophenacyl bromide, but was completely inactivated by alpha-diazo-p-bromoacetophenone, diazoacetyl-DL-norleucine methyl ester, and diazoacetylglycine ethyl ester, in the presence of Cu2+. The complete inactivation of the protease by diazoacetyl-DL-norleucine methyl ester resulted in the specific incorporation of 1 mol of norleucine/mol of enzyme. On the basis of similar behavior of other acid proteases toward this inactivator, the results suggest the presence at the active site of an unusually reactive carboxyl group, involved in the catalytic function. The naturally occurring pepsin inhibitor of Streptomyces naniwaensis [Murao, S., and Satoi, S. (1970), Agric. Biol. Chem. 34, 1265] inhibited also the protease, at a threefold molar excess with respect to the enzyme.     

The states of tyrosyl and tryptophyl residues in a protein proteinase inhibitor (Streptomyces subtilisin inhibitor

The states of tyrosyl and tryptophyl residues of a dimeric protein proteinase inhibitor, Streptomyces subtilisin inhibitor (Sato, S & Murao, S. (1973), Agric. Biol. Chem. 37, 1067) were studies by solvent perturbation difference spectroscopy with methanol, ethylene glycol, polyethylene glycol, and deuterium oxide as perturbants, and by spectrophotometric titration at alkaline pH. It appeared that all three tyrosyl residues per monomer of the inhibitor were exposed on the surface of the molecule, and their apparent pK values were estimated separately to be 9.58, 11.10, and 12.42. The single tryptophyl residue per monomer of the inhibitor appeared to be partially buried in the protein molecule.     

S-Sulfocysteine as a Source of the Sulfur Atom of Cephalosporin C

S. lignicolum acid proteinases A-1, A-2, and B (S-PI-insensitive) were examined for the structure of the active sites by the method of Nakatani using PAD as a probe. We attempted to screen for substances that release zinc(II)-PAD from the complex of zinc(II)-PAD-S-PI-insensitive acid proteinases. Angiotensin I released zinc(II)-PAD from the complex as well as from the complex of S-PI-sensitive acid proteinases. Angiotensin I is a good substrate for these enzymes regardless of S-PI-sensitivity. These results suggest that the two carboxyl groups capable of binding to zinc(II)-PAD are at the active site regions of S. lignicolum enzymes and that they are involved in their catalytic actions.     

3,4-dichloroisocoumarin-induced activation of the degradation of beta-casein by the bovine pituitary multicatalytic proteinase complex.

The breakdown of beta-casein (caseinolytic activity) by the bovine pituitary multicatalytic proteinase complex (MPC) is initiated by a fourth active site different from the previously described chymotrypsin-like activity (cleavage of Cbz-Gly-Gly-Leu-p-nitroanilide, where Cbz is benzyloxycarbonyl), trypsin-like activity (cleavage of Cbz-D-Ala-Leu-Arg-2-naphthylamide), and peptidylglutamyl peptide bond-hydrolyzing (PGP) activity (cleavage of Cbz-Leu-Leu-Glu-2-naphthylamide) (Yu, B., Pereira, M. E., and Wilk, S. (1991) J. Biol. Chem. 266, 17396-17400). 3,4-Dichloroisocoumarin, a serine proteinase inhibitor, stimulated the caseinolytic activity of bovine pituitary or lens MPC, 3-18-fold under conditions under which the other three catalytic activities were inactivated. Addition of hydroxylamine to the modified enzyme did not reverse the effects of the inhibitor. A form of the proteinase exhibiting only 2-4% of control chymotrypsin-like, trypsin-like, and PGP activities degraded beta-casein with no accumulation of intermediate peptides. 3,4-Dichloroisocoumarin, by reacting with the chymotrypsin-like, trypsin-like, and/or PGP-active sites, may promote a conformational change of MPC, rendering the caseinolytic active site accessible to the substrate. Once bound to the active site, beta-casein is rapidly degraded either by the caseinolytic component itself or by a cooperative interaction with catalytic centers that are not affected by the serine proteinase inhibitor. These results imply that the caseinolytic component does not belong to the class of serine proteinases. Other proteins tested were not degraded by the 3,4-dichloroisocoumarin-treated enzyme, suggesting that the conformation of beta-casein may be more adequate for degradation by the caseinolytic component.     

Affinity labeling of cAMP-dependent protein kinase with p-fluorosulfonylbenzoyl adenosine. Covalent modification of lysine 71

p-Fluorosulfonylbenzoyl 5'-adenosine (FSO2BzAdo) was shown previously to be an irreversible inhibitor of the catalytic subunit of cAMP-dependent protein kinase II from porcine skeletal muscle (Zoller, M. J., and Taylor, S. S. (1979) J. Biol. Chem. 254, 8363-8368). The catalytic subunit of porcine heart cAMP-dependent protein kinase was also inhibited following incubation with FSO2[14C]BzAdo, and inhibition was shown to result from the stoichiometric, covalent modification of a single lysine residue. The amino acid sequence in an extended region around the carboxybenzenesulfonyl lysine (CBS-lysine) was elucidated by characterizing both tryptic and cyanogen bromide peptides containing the 14C-modified residue. The sequence in this region was Leu-Val-Lys-His-Lys-Glu-Thr-Gly-Asn-His-Phe-Ala-Met-Lys(CBS)-Ile-Leu-Asp-Lys-Glu-Lys-Val-Val-Lys-Leu-Lys-Gln-Ile. The covalently modified residue corresponded to lysine 71 in the overall polypeptide chain. Homologies to bovine heart catalytic subunit and to a site modified by FSO2BzAdo in phosphofructokinase are considered.     

Structural analyses of a malate dehydrogenase with a variable active site

Malate dehydrogenase specifically oxidizes malate to oxaloacetate. The specificity arises from three arginines in the active site pocket that coordinate the carboxyl groups of the substrate and stabilize the newly forming hydroxyl/keto group during catalysis. Here, the role of Arg-153 in distinguishing substrate specificity is examined by the mutant R153C. The x-ray structure of the NAD binary complex at 2.1 A reveals two sulfate ions bound in the closed form of the active site. The sulfate that occupies the substrate binding site has been translated approximately 2 A toward the opening of the active site cavity. Its new location suggests that the low catalytic turnover observed in the R153C mutant may be due to misalignment of the hydroxyl or ketone group of the substrate with the appropriate catalytic residues. In the NAD.pyruvate ternary complex, the monocarboxylic inhibitor is bound in the open conformation of the active site. The pyruvate is coordinated not by the active site arginines, but through weak hydrogen bonds to the amide backbone. Energy minimized molecular models of unnatural analogues of R153C (Wright, S. K., and Viola, R. E. (2001) J. Biol. Chem. 276, 31151-31155) reveal that the regenerated amino and amido side chains can form favorable hydrogen-bonding interactions with the substrate, although a return to native enzymatic activity is not observed. The low activity of the modified R153C enzymes suggests that precise positioning of the guanidino side chain is essential for optimal orientation of the substrate.     

Rate of chase-promoted hydrolysis of ATP in the high affinity catalytic site of beef heart mitochondrial ATPase

Incubation of [gamma-32P]ATP with a molar excess of the soluble, homogeneous ATPase from beef heart mitochondria (F1) results in binding of substrate primarily in a single, very high affinity (KA = 10(12) M-1) catalytic site and in a slow rate of hydrolysis characteristic of single site catalysis. Subsequent addition of millimolar concentrations of nonradioactive ATP as a cold chase, sufficient to fill catalytic sites on the enzyme, results in an acceleration of hydrolysis of bound radioactive ATP of as much as 10(6)-fold, that is, to Vmax rates (Cross, R.L., Grubmeyer, C., and Penefsky, H.S. (1982) J. Biol. Chem. 257, 12101-12105). For this reason, it was proposed that the high affinity catalytic site is a normal catalytic site on the molecule. Recently, Bullough et al. (Bullough, D.A., Verburg, J.G., Yoshida, M., and Allison, W.A. (1987) J. Biol. Chem. 262, 11675-11683) reported that when 5 to 20 microM concentrations of nonradioactive ATP were added as a cold chase to an enzyme-substrate complex consisting of F1 and ATP bound to the high affinity catalytic site, hydrolysis of the chase was commensurate with the turnover rate of the enzyme, whereas the hydrolysis of bound ATP was considerably slower. These authors suggested that the high affinity catalytic site on F1 is not a normal catalytic site. This paper shows, in experiments with a rapid mixing-chemical quench apparatus, that hydrolysis of ATP bound in the high affinity catalytic site is accelerated to Vmax rates following addition of 5 microM ATP as a cold chase. Hydrolysis of bound ATP appears to precede that of the chase. The weight of the available evidence continues to support the original suggestion that the high affinity catalytic site of beef heart F1 is a normal catalytic site.     

The interaction of Phe472 with a fluorescent inhibitor bound to the complex of myosin subfragment-1 with nucleotide

The fluorescent probe 3-[4-(3-phenyl-2-pyrazolin-1-yl)benzene-1-sulfonyl amido]phenylboronic acid (PPBA) acts as a fluorescent inhibitor for the ATPases of skeletal [Hiratsuka (1994) J. Biol. Chem. 269, 27251-27257] and Dictyostelium discoideum [Bobkov et al. (1997) J. Muscle Res. Cell Motil. 18, 563-571] myosins. The former paper suggested that, upon addition of excess nucleotides to the binary complex of subfragment-1 from skeletal myosin (S1) with PPBA, a stable ternary complex of S1 with PPBA and nucleotide is formed. Useful fluorescence properties of PPBA enable us to distinguish the conformation of the myosin ATPase at the ATP state from that at the ADP state. In the present paper, to determine the PPBA-binding site in the complexes, enzymatic and fluorescence properties of the S1.PPBA.nucleotide complexes were investigated. Upon formation of the ternary complex with ATP, a new peak appeared at 398 nm in the PPBA fluorescence spectrum. Experiments using model compounds of aromatic amino acid suggested that this fluorescence peak at 398 nm is originated from PPBA interacting with Phe residue(s). Taking into account differences in fluorescence spectra between complexes of S1 and those of subfragment-1 from D. discoideum myosin (S1dC), in the ternary complex of S1 formed with ATP, PPBA was suggested to interact with Phe residue(s) that is absent in S1dC. Docking simulation of PPBA on the S1.nucleotide complex revealed that Phe472 interacts with PPBA. Binding sites of PPBA and blebbistatin, an inhibitor showing high affinity and selectivity toward myosin II [Kovács et al. (2004) J. Biol. Chem. 279, 35557-35563], seem to overlap at least partly.     

The quorum-quenching lactonase from Bacillus thuringiensis is a metalloprotein

Lactonases from Bacillus species hydrolyze the N-acylhomoserine lactone (AHL) signaling molecules used in quorum-sensing pathways of many Gram-negative bacteria, including Pseudomonas aeruginosa and Erwinia carotovora, both significant pathogens. Because of sequence similarity, these AHL lactonases have been assigned to the metallo-beta-lactamase superfamily of proteins, which includes metalloenzymes of diverse activity, mechanism, and metal content. However, a recent study claims that AHL lactonase from Bacillus sp. 240B1 is not a metalloprotein [Wang, L. H., et al. (2004) J. Biol. Chem. 279, 13645]. Here, the gene for an AHL lactonase from Bacillus thuringiensis is cloned, and the protein is expressed, purified, and found to bind 2 equiv of zinc. The metal-bound form of AHL lactonase catalyzes the hydrolysis of N-hexanoyl-(S)-homoserine lactone but not the (R) enantiomer. Removal of both zinc ions results in loss of activity, and reconstitution with zinc restores activity, indicating the importance of metal ions for catalytic activity. Metal content, sequence alignments, and X-ray absorption spectroscopy of the zinc-containing lactonase all support a proposed dinuclear zinc binding site similar to that found in glyoxalase II.     

Binding of arylazidocytochrome c derivatives to beef heart cytochrome c oxidase: cross-linking in the high- and low-affinity binding sites

Two arylazidocytochrome c derivatives, one modified at lysine-13 and the second modified at lysine-22, were reacted with beef heart cytochrome c oxidase. The lysine-13 modified arylazidocytochrome c was found to cross-link both to the enzyme and with lipid bound to the cytochrome c oxidase complex. The lysine-22 derivative reacted only with lipids. Cross-linking to protein was through subunit II of the cytochrome c oxidase complex, as first reported by Bisson et al. [Bisson, R., Azzi, A., Gutweniger, H., Colonna, R., Monteccuco, C., & Zanotti, A. (1978) J. Biol. Chem. 253, 1874]. Binding studies show that the cytochrome c derivative covalently bound to subunit II was in the high-affinity binding site for the substrate. Evidence is also presented to suggest that cytochrome c bound to the lipid was in the low-affinity binding site [as defined by Ferguson-Miller et al. [Ferguson-Miller, S., Brautigan, D. L., & Margoliash, E. (1976) J. Biol. Chem. 251, 1104]]. Covalent binding of the cytochrome c derivative into the high-affinity binding site was found to inhibit electron transfer even when native cytochrome c was added as a substrate. Inhibition was almost complete when 1 mol of the Lys-13 modified arylazidocytochrome c was covalently bound to the enzyme per cytochrome c oxidase dimer (i.e., congruent to 280 000 daltons). Covalent binding of either derivative with lipid (low-affinity site) had very little effect on the overall electron transfer activity of cytochrome c oxidase. These results are discussed in terms of current theories of cytochrome c-cytochrome c oxidase interactions.     

Features and applications of bilirubin oxidases

Discovered in 1981 by Tanaka and Murao (Agric Biol Chem 45:2383-2384, 1981), bilirubin oxidase (BOD) is a sub-group of multicopper oxidases (MCOs) also utilizing four Cu(+/2+) ions. It catalyzes the oxidation of bilirubin to biliverdin, hence the classification of bilirubin oxidase, and has been primarily used in the determination of bilirubin in serum and thereby in the diagnostic of jaundice. Unlike laccases, the most studied MCOs, BODs display a high activity and stability at neutral pH, a high tolerance towards chloride anions and other chelators, and for some species, a high thermal tolerance. Therefore, BODs could potentially be an alternative to laccase which are so far mainly restricted to applications in acid media. Because of growing interest in BODs for numerous applications under mild pH conditions, based on the number of patents and publications published in the last 5?years, here I will summarize the available data on the biochemical properties of BODs, their occurrence, and their possible biotechnological use in (1) the field of Healthcare for the elaboration of biofuel cells or bilirubin sensors or (2) the field of environmentally desirable applications such as depollution, decolorization of dyes, and pulp bleaching.     

Mg X ATP2-dependent interaction of the inhibitor protein of the cAMP-dependent protein kinase with the catalytic subunit

The interaction between the inhibitor protein and the catalytic subunit of the cAMP-dependent protein kinase has been investigated by steady state kinetics and by an assessment of the requirement of this interaction for ATP. By analysis for tightly bound inhibitors, inhibition by the inhibitor protein was shown to be competitive versus peptide substrate and uncompetitive versus Mg X ATP2-. This, together with the observations of Gronot et al. (Gronot, J., Mildvan, A.S., Bramson, H. N., Thomas, N., and Kaiser, E.T. (1981) Biochemistry 20, 602-610) and those given in the accompanying paper (Whitehouse, S., Feramisco, J.R., Casnellie, J.E., Krebs, E.G., and Walsh, D.A. (1983) J. Biol. Chem. 258, 3693-3701), would indicate that the probable reaction mechanism of the protein kinase is ordered with the nucleotide binding first and that the inhibitor protein blocks catalysis by interaction with the catalytic subunit-Mg X ATP complex. The Ki for this interaction at saturating Mg X ATP and zero peptide substrate is 0.49 nM. Multiple inhibition analysis in the presence of 5'-adenylimidodiphosphate (AMP X PNP) indicates that the inhibitor protein does not interact with a catalytic subunit-AMP X PNP complex. The requirement for ATP for the inhibitor protein-catalytic subunit interaction has also been demonstrated by direct binding measurements and by the observation that the efficiency of the inhibitor protein is increased by preincubation of the inhibitor protein, catalytic subunit, and ATP in the absence of peptide substrate. By either measurement, the catalytic subunit in the presence of the inhibitor protein, was shown to exhibit an apparent Kd of 20 approximately 60 nM for ATP; this value is two orders of magnitude higher than the affinity for ATP by the catalytic subunit alone. This high apparent affinity of the catalytic subunit for ATP (in the presence of the inhibitor) does not require that there be a specific binding site on the inhibitor protein for some moiety of the ATP but may simply be a reflection of the formation of a catalytic subunit-Mg X ATP X inhibitor protein complex with resultant displacement of the equilibrium of ATP binding to the protein kinase.     

Selective proteolysis of cytosolic aspartate aminotransferase by a new microbial protease

A protease from Streptomyces violaceochromogenes (Murao, S., Nishino, Y., & Maeda, Y. (1984) Agric. Biol. Chem. 48, 2163-2166) is known to inactivate pig heart aspartate aminotransferase [EC 2.6.1.1]. Chemical analysis of the core proteins and peptide fragments produced upon proteolysis of the aminotransferase revealed that peptide bond cleavage occurred specifically at Leu 20 with concomitant inactivation. Neither inactivation nor peptide bond cleavage was observed with the mitochondrial isoenzyme. The proteolytically produced derivative 21-412 of the cytosolic isoenzyme retained approximately 0.1% enzymic activity for transamination with natural dicarboxylic substrates. The pyridoxal form of the derivative 21-412 was fully converted by cysteinesulfinate or alanine to the pyridoxamine form and conversely the pyridoxamine form of the derivative was also fully converted by 2-oxoglutarate or pyruvate into the pyridoxal form, indicating that the derivative was still catalytically competent. However, the rates of reaction with dicarboxylic substrates were much reduced whereas the rates with monocarboxylic substrates remained at an order of magnitude similar to that observed with the native enzyme. Thus the NH2-terminal segment appears to be an import structural component which determines the substrate specificity of aspartate aminotransferase for dicarboxylic keto and amino acids. A substantial alteration in the molecular structure accompanying the loss of the NH2-terminal 20 residues was also reflected by the decrease in heat stability and in the lowering of the pKa value for His 68, which is involved in the intersubunit interaction of this dimeric enzyme.     

A spectral study of cobalt(II)-substituted Bacillus cereus phospholipase C

The coordination sphere of both the structural and catalytic zinc ions of Bacillus cereus phospholipase C has been probed by substitution of cobalt(II) for zinc and investigation of the resultant derivatives by a variety of spectroscopic techniques. The electronic absorption, circular dichroic, magnetic circular dichroic, and electron paramagnetic resonance spectra were found to be strikingly similar when cobalt(II) was substituted into either site and are consistent with a distorted octahedral environment for the metal ion in both sites. Octahedral coordination appears comparatively rare in zinc metalloenzymes but has been suggested for glyoxalase I [Sellin, S., Eriksson, L. E. G., Aronsson, A.-C., & Mannervik, B. (1983) J. Biol. Chem. 258, 2091-2093; Garcia-Iniguez, L., Powers, L., Chance, B., Sellin, S., Mannervik, B., & Mildvan, A. S. (1984) Biochemistry 23, 685-689], transcarboxylase [Fung, C.-H., Mildvan, A. S., & Leigh, J. S. (1974) Biochemistry 13, 1160-1169], and the regulatory binding site of Aeromonas aminopeptidase [Prescott, J. M., Wagner, F. W., Holmquist, B., & Vallee, B. L. (1985) Biochemistry 24, 5350-5356]. Phospholipase C is so far unique in having two such sites.     

Aurovertin fluorescence changes of the mitochondrial F1-ATPase during multi- and uni-site ATP hydrolysis

The aurovertin-F1 complex was used to monitor fluorescence changes of the mitochondrial adenosine triphosphatase during multi- and uni-site ATP hydrolysis. It is known that the fluorescence intensity of the complex is partially quenched by addition of ATP or Mg2+ and enhanced by ADP (Chang, T., and Penefsky, H. S. (1973) J. Biol. Chem. 248, 2746-2754). In the present study low concentrations of ATP (0.03 mM) induced a marked fluorescence quenching which was followed by a fast fluorescence recovery. This recovery could be prevented by EDTA or an ATP regenerating system. The rate of ATP hydrolysis by the aurovertin-F1 complex and the reversal of the ATP-induced fluorescence quenching were determined in these various conditions. ITP hydrolysis also resulted in fluorescence quenching that was followed by a recovery of fluorescence intensity. Under conditions for single site catalysis, fluorescence quenching was observed upon the addition of ATP. This strongly indicates that fluorescence changes in the aurovertin-F1 complex are due to the binding and hydrolysis of ATP at a catalytic site. Therefore the resulting ADP molecule bound at this catalytic site possibly induces the fluorescence recovery observed.     

Isolation and properties of the rabbit skeletal muscle protein inhibitor of adenosine 3',5'-monophosphate dependent protein kinases.

The heat-stable protein inhibitor (Walsh, D. A., et al. (1971), J. Biol. Chem. 246, 1977--1985) of the cyclic adenosine 3',5'-monophosphate dependent protein kinase has been isolated in pure form from rabbit skeletal muscle after a 430 000-fold purification with a 47% yield. The four-step procedure involves sequentially a heat treatment, batchwise anion and cation exchange, and affinity chromatography on protein kinase catalytic subunit covalently coupled to Sepharose 4B. The inhibitor is an acidic protein (pI = 4.24) of molecular weight 11 300. It contains 98 amino acid residues none of which contains sulfur and only 2 (phenylalanine and tyrosine) are aromatic. The NH2-terminus is blocked. The muscle content is ca. 0.6 mg of inhibitor per L of intracellular water. The inhibitor is tightly bound to the catalytic subunit of protein kinase (Ki congruent to 2 X 10(-9) M) and acts competitively with respect to the protein substrates. Protein kinase recognizes a short stretch of the inhibitor sequence, in which arginyl side chains play a crucial role. A study of various competitive inhibitors of the kinase confirms the importance of guanidino groups and hydrophobic side chains in the specific interaction with the substrate binding site.     

Inhibition of dog and human gastric lipases by enantiomeric phosphonate inhibitors: a structure-activity study

The crystal structures of gastric lipases in the apo form [Roussel, A., et al. (1999) J. Biol. Chem. 274, 16995-17002] or in complex with the (R(P))-undecyl butyl phosphonate [C(11)Y(4)(+)] [Roussel, A., et al. (2002) J. Biol. Chem. 277, 2266-2274] have improved our understanding of the structure-activity relationships of acid lipases. In this report, we have performed a kinetic study with dog and human gastric lipases (DGL and HGL, respectively) using several phosphonate inhibitors by varying the absolute configuration of the phosphorus atom and the chain length of the alkyl/alkoxy substituents. Using the two previously determined structures and that of a new crystal structure obtained with the other (S(P))-phosphonate enantiomer [C(11)Y(4)(-)], we constructed models of phosphonate inhibitors fitting into the active site crevices of DGL and HGL. All inhibitors with a chain length of fewer than 12 carbon atoms were found to be completely buried in the catalytic crevice, whereas longer alkyl/alkoxy chains were found to point out of the cavity. The main stereospecific determinant explaining the stronger inhibition of the S(P) enantiomers is the presence of a hydrogen bond involving the catalytic histidine as found in the DGL-C(11)Y(4)(-) complex. On the basis of these results, we have built a model of the first tetrahedral intermediate corresponding to the tristearoyl-lipase complex. The triglyceride molecule completely fills the active site crevice of DGL, in contrast with what is observed with other lipases such as pancreatic lipases which have a shallower and narrower active site. For substrate hydrolysis, the supply of water molecules to the active site might be achieved through a lateral channel identified in the protein core.     

Metal binding specificity in carbonic anhydrase is influenced by conserved hydrophobic core residues.

The role of highly conserved aromatic residues surrounding the zinc binding site of human carbonic anhydrase II (CAII) in determining the metal ion binding specificity of this enzyme has been examined by mutagenesis. Residues F93, F95, and W97 are located along a beta-strand containing two residues that coordinate zinc, H94 and H96, and these aromatic amino acids contribute to the high zinc affinity and slow zinc dissociation rate constant of CAII [Hunt, J. A., and Fierke, C. A. (1997) J. Biol. Chem. 272, 20364-20372]. Substitutions of these aromatic amino acids with smaller side chains enhance the copper affinity (up to 100-fold) while decreasing the affinity of both cobalt and zinc, thereby altering the metal binding specificity up to 10(4)-fold. Furthermore, the free energy of the stability of native CAII, determined by solvent-induced denaturation, correlates positively with increased hydrophobicity of the amino acids at positions 93, 95, and 97 as well as with cobalt and zinc affinity. Conversely, increased copper affinity correlates with decreased protein stability. Zinc specificity is therefore enhanced by formation of the native enzyme structure. These data suggest that the hydrophobic cluster in CAII is important for orienting the histidine residues to stabilize metals bound with a distorted tetrahedral geometry and to destabilize the trigonal bipyramidal geometry of bound copper. Knowledge of the structural factors that lead to high metal ion specificity will aid in the design of metal ion biosensors and de novo catalytic sites.     

Zinc (II) coordination in Escherichia coli DNA topoisomerase I is required for cleavable complex formation with DNA.

Escherichia coli DNA topoisomerase I catalyzes relaxation of negatively supercoiled DNA. The reaction proceeds through a covalent intermediate, the cleavable complex, in which the DNA is cleaved and the enzyme is linked to the DNA via a phosphotyrosine linkage. Each molecule of E. coli DNA topoisomerase I has been shown to have three tightly bound zinc(II) ions required for relaxation activity (Tse-Dinh, Y.-C., and Beran-Steed, R.K. (1988) J. Biol. Chem. 263, 15857-15859). It is shown here that Cd(II) could replace Zn(II) in reconstitution of active enzyme from apoprotein. The role of metal was analyzed by studying the partial reactions. The apoenzyme was deficient in sodium dodecyl sulfate-induced cleavage of supercoiled PM2 phage DNA. Formation of covalent complex with linear single-stranded DNA was also reduced in the absence of metal. However, the cleavage of small oligonucleotide was not affected, and the apoenzyme could religate the covalently bound oligonucleotide to another DNA molecule. Assay of noncovalent complex formation by retention of 5'-labeled DNA on filters showed that the apoenzyme was not inhibited in noncovalent binding to DNA. It is proposed that zinc(II) coordination in E. coli DNA topoisomerase I is required for the transition of the noncovalent complex with DNA to the cleavable state.     

The X-ray crystal structure of the catalytic domain of human neutrophil collagenase inhibited by a substrate analogue reveals the essentials for catalysis and specificity.

Matrix metalloproteinases are a family of zinc endopeptidases involved in tissue remodelling. They have been implicated in various disease processes including tumour invasion and joint destruction. These enzymes consist of several domains, which are responsible for latency, catalysis and substrate recognition. Human neutrophil collagenase (PMNL-CL, MMP-8) represents one of the two 'interstitial' collagenases that cleave triple helical collagens types I, II and III. Its 163 residue catalytic domain (Met80 to Gly242) has been expressed in Escherichia coli and crystallized as a non-covalent complex with the inhibitor Pro-Leu-Gly-hydroxylamine. The 2.0 A crystal structure reveals a spherical molecule with a shallow active-site cleft separating a smaller C-terminal subdomain from a bigger N-terminal domain, composed of a five-stranded beta-sheet, two alpha-helices, and bridging loops. The inhibitor mimics the unprimed (P1-P3) residues of a substrate; primed (P1'-P3') peptide substrate residues should bind in an extended conformation, with the bulky P1' side-chain fitting into the deep hydrophobic S1' subsite. Modelling experiments with collagen show that the scissile strand of triple-helical collagen must be freed to fit the subsites. The catalytic zinc ion is situated at the bottom of the active-site cleft and is penta-coordinated by three histidines and by both hydroxamic acid oxygens of the inhibitor. In addition to the catalytic zinc, the catalytic domain harbours a second, non-exchangeable zinc ion and two calcium ions, which are packed against the top of the beta-sheet and presumably function to stabilize the catalytic domain.(ABSTRACT TRUNCATED AT 250 WORDS)