Diethyl-p-nitrophenyl phosphate: an active site titrant for lipoprotein lipase

Diethyl-p-nitrophenyl phosphate is an active site-directed irreversible inhibitor of bovine milk lipoprotein lipase catalyzed hydrolysis of the water-soluble substrate, p-nitrophenyl butyrate. Interaction of lipoprotein lipase and the inhibitor in the absence of substrate gives a biphasic kinetics profile, which is consistent with rapid formation of a phosphoryl-lipoprotein lipase intermediate which hydrolyzes slowly. The magnitude of the absorbance increase accompanying formation of the intermediate provides an analytical method for determining lipoprotein lipase active site concentration.     

Interfacial reaction dynamics and acyl-enzyme mechanism for lipoprotein lipase-catalyzed hydrolysis of lipid p-nitrophenyl esters

The fatty acyl (lipid) p-nitrophenyl esters p-nitrophenyl caprylate, p-nitrophenyl laurate and p-nitrophenyl palmitate that are incorporated at a few mol % into mixed micelles with Triton X-100 are substrates for bovine milk lipoprotein lipase. When the concentration of components of the mixed micelles is approximately equal to or greater than the critical micelle concentration, time courses for lipoprotein lipase-catalyzed hydrolysis of the esters are described by the integrated form of the Michaelis-Menten equation. Least square fitting to the integrated equation therefore allows calculation of the interfacial kinetic parameters Km and Vmax from single runs. The computational methodology used to determine the interfacial kinetic parameters is described in this paper and is used to determine the intrinsic substrate fatty acyl specificity of lipoprotein lipase catalysis, which is reflected in the magnitude of kcat/Km and kcat. The results for interfacial lipoprotein lipase catalysis, along with previously determined kinetic parameters for the water-soluble esters p-nitrophenyl acetate and p-nitrophenyl butyrate, indicate that lipoprotein lipase has highest specificity for the substrates that have fatty acyl chains of intermediate length (i.e. p-nitrophenyl butyrate and p-nitrophenyl caprylate). The fatty acid products do not cause product inhibition during lipoprotein lipase-catalyzed hydrolysis of lipid p-nitrophenyl esters that are contained in Triton X-100 micelles. The effects of the nucleophiles hydroxylamine, hydrazine, and ethylenediamine on Km and Vmax for lipoprotein lipase catalyzed hydrolysis of p-nitrophenyl laurate are consistent with trapping of a lauryl-lipoprotein lipase intermediate. This mechanism is confirmed by analysis of the product lauryl hydroxamate when hydroxylamine is the nucleophile. Hence, lipoprotein lipase-catalyzed hydrolysis of lipid p-nitrophenyl esters that are contained in Triton X-100 micelles occurs via an interfacial acyl-lipoprotein lipase mechanism that is rate-limited by hydrolysis of the acyl-enzyme intermediate.     

How gastric lipase, an interfacial enzyme with a Ser-His-Asp catalytic triad, acts optimally at acidic pH

Gastric lipase is active under acidic conditions and shows optimum activity on insoluble triglycerides at pH 4. The present results show that gastric lipase also acts in solution on vinyl butyrate, with an optimum activity above pH 7, which suggests that gastric lipase is able to hydrolyze ester bonds via the classical mechanism of serine hydrolases. These results support previous structural studies in which the catalytic triad of gastric lipase was reported to show no specific features. The optimum activity of gastric lipase shifted toward lower pH values, however, when the vinyl butyrate concentration was greater than the solubility limit. Experiments performed with long-chain triglycerides showed that gastric lipase binds optimally to the oil-water interface at low pH values. To study the effects of the pH on the adsorption step independently from substrate hydrolysis, gastric lipase adsorption on solid hydrophobic surfaces was monitored by total internal reflection fluorescence (TIRF), as well as using a quartz crystal microbalance. Both techniques showed a pH-dependent reversible gastric lipase adsorption process, which was optimum at pH 5 (Kd = 6.5 nM). Lipase adsorption and desorption constants (ka = 147,860 M(-1) s(-1) and kd = 139 x 10(-4) s(-1) at pH 6) were estimated from TIRF experiments. These results indicate that the optimum activity of gastric lipase at acidic pH is only "apparent" and results from the fact that lipase adsorption at lipid-water interfaces is the pH-dependent limiting step in the overall process of insoluble substrate hydrolysis. This specific kinetic feature of interfacial enzymology should be taken into account when studying any soluble enzyme acting on an insoluble substrate.     

Escherichia coli alkaline phosphatase. An analysis of transient kinetics

1. The hydrolysis of 2,4-dinitrophenyl phosphate by Escherichia coli alkaline phosphatase at pH5.5 was studied by the stopped-flow technique. The rate of production of 2,4-dinitrophenol was measured both in reactions with substrate in excess of enzyme and in single turnovers with excess of enzyme over substrate. It was found that the step that determined the rate of the transient phase of this reaction was an isomerization of the enzyme occurring before substrate binding. 2. No difference was observed between the reaction after mixing a pre-equilibrium mixture of alkaline phosphatase and inorganic phosphate, with 2,4-dinitrophenyl phosphate at pH5.5 in the stopped-flow apparatus, and the control reaction in which inorganic phosphate was pre-equilibrated with the substrate. Since dephosphorylation is the rate-limiting step of the complete turnover at pH5.5, this observation suggests that alkaline phosphatase can bind two different ligands simultaneously, one at each of the active sites on the dimeric enzyme, even though only one site is catalytically active at any given time. 3. Kinetic methods are outlined for the distinction between two pathways of substrate binding, which include an isomerization either of the free enzyme or of the enzyme-substrate complex.     

The kinetics of the reaction of nitrophenyl phosphates with alkaline phosphatase from Escherichia coli

1. The steady-state rate of hydrolysis of 2,4-dinitrophenyl phosphate catalysed by Escherichia coli phosphatase is identical with that of 4-nitrophenyl phosphate over the pH range 5.5-8.5. 2. The increase in the rate of the enzyme-catalysed decomposition of nitrophenyl phosphates in the presence of tris at pH8.1 and 5.9 is consistent with the hypothesis that tris increases the rate of decomposition of a phosphoryl-enzyme intermediate. At pH8.1 the rate of decomposition of the phosphoryl-enzyme is approximately twice as fast as the rate of its formation, whereas at pH5.9 the rate of formation of the phosphoryl-enzyme is considerably faster than its decomposition. 3. Pre-steady-state measurements of the initial transient of the liberation of 2,4-dinitrophenol during the reaction of the enzyme with 2,4-dinitrophenyl phosphate confirmed the above pH-dependence of the ratio of the rates of phosphorylation and dephosphorylation of the enzyme. At optimum pH (above pH8), when the phosphorylation of the enzyme by the substrate is rate-determining, this step must be controlled by a rearrangement of the enzyme or enzyme-substrate complex.     

Studies of the Heterogeneity of a Candida cylindracea (rugosa) Lipase: Monitoring of Esterolytic Activity and Enantioselectivity by Chiral Liquid Chromatography

A method for the determination of lipase activity in terms of rate and enantioselectivity of hydrolysis of a chiral ester substrate has been developed. When this method was applied to fractions, isolated from preparative, column chromatographic separations (anion-exchange, molecular sieve) of the lipase, significant differences in enantioselectivity (E) was found between the fractions. The highest enantioselectivity was found in the first main peak obtained on DEAE-Sepharose chromatography, meaning that the enzyme with the highest isoelectric point shows the highest esterolytic enantioselectivity.

The experimental results are discussed in the light of some earlier reported results and with respect to the possible existence of subunit aggregates and isoenzymes.     

Regioselective Enzymatic Hydrolysis of 3',5'-DI-O-Acetylthymidine and Observation of a Surface Effect Due to Polystyrene

The selective enzymatic hydrolysis of 3',5'-di-O-acetylthyidine (1) was studied. The lipases from porcine pancreas and Aspergillus niger, and pig liver esterase, all catalysed selective hydrolysis of the 5'O-acetyl group, but the lipase from Candida cylindracea catalysed selective hydrolysis of the 3'-O-acetyl group. Highest selectivity, leading to essentially pure 3'-O-acetylthymidine, was achieved using porcine pancreatic lipase in dilute solution at pH 7.5. Provision of an artificial interface in the form of polystyrene beads led to a significant increase in the rate of hydrolysis, accompanied by a marked fall in selectivity. Other changes in the hydrolysis conditions, such as raising the concentration of substrate or adding cosolvent, also led to a fall in selectivity.     

Mapping substrate selectivity of lipases from thermophilic fungi

New methods were adapted to screen, fast and easily, the lipase specificity (topo- or enantio-selectivity) on crude extracellular extracts from thermophilic fungi. Substrate acyl chain length specificity was tested using p-nitrophenyl esters and vinyl esters by the detection of released p-nitrophenolate anions in the first case and protonation of p-nitrophenolate anions (color diminution) in the second case. Enantioselectivity was tested using either the direct reaction rates on individual enantiomers of glycidyl butyrate or on competition between these enantiomers and resorufin esters (-butyrate or -acetate). Among a library of 44 thermophilic fungi, 10 strains were pre-selected (based on their capabilities to produce constitutively extracellular lipases) for further lipase specificity studies. The above methods were applied to lipases from these pre-selected fungi and also to other several lipases preparations from bacterial, fungal and mammalian origin. Remarkably, the method on competition allowed the accurate determination of the enantiomeric ratio (E), since experimental data fitted correctly with the E determined by classical chemical methods. Consequently, these methods can be applicable for screening selectivity in a high number of lipases or esterases from wild isolates or variants generated by directed evolution, using directly in the test, the substrate (i.e. esters) that will be worked out in a given process.     

Resorufin butyrate as a soluble and monomeric high-throughput substrate for a triglyceride lipase

Triglyceride lipases such as lipoprotein lipase, endothelial lipase, and hepatic lipase play key roles in controlling the levels of plasma lipoprotein. Accordingly, small-molecule modulation of these species could alter patient lipid profiles with corresponding health effects. Screening of these enzymes for small-molecule therapeutics has historically involved the use of lipid-based particles to mimic native substrates. However, particle-based artifacts can complicate the discovery of therapeutic molecules. As a simplifying solution, the authors sought to develop an approach involving a soluble and monomeric lipase substrate. Using purified bovine lipoprotein lipase as a model system, they show that the hydrolysis of resorufin butyrate can be fluorescently monitored to give a robust assay (Z' > 0.8). Critically, using parallel approaches, they show that resorufin butyrate is soluble and monomeric under assay conditions. The presented assay should be useful as a simple and inexpensive primary or secondary screen for the discovery of therapeutic lipase modulators.     

Enzymatic resolution of (R, S)-Naproxen in water-saturated ionic liquid

A water-saturated ionic liquid has been exploited for resolution of (R, S)-Naproxen by lipase-catalyzed hydrolysis to enhance the conversion and facilitate product recovery. From the enantioselectivity and activity of lipase, water-saturated [bmim]PF₆ (1-butyl-3-methylimidazolium hexafluorophosphate) was selected as the best reaction medium. To prevent the dissolution of lipase in the ionic liquid, a weakly polar, amorphous multiporous silica YWG-C₆H₅ was used as a support for immobilization. The production of (S)-Naproxen was initially performed in a batch reactor containing 20 mL of substrate solution. After 72 h reaction, 98.2% enantiomeric excess of the (S)-Naproxen was obtained with 28.3% hydrolysis conversion. The unconventional solvent properties of ionic liquids have been exploited in reaction medium recycling, product recovery and water recruiting schemes. In a repetitive batch reaction system, the immobilized lipase could be repeatedly used for 5 times with only a slight reduction in reaction conversion.     

Conformational changes in human urokinase induced by a specific reduction of disulfide bond in Cys-194-Cys-222 associated with exhibition of enzymatic activity

The mechanism of action of hepatic triacylglycerol lipase (EC 3.1.1.3) was examined by comparing the hydrolysis of a water-soluble substrate, tributyrin, with that of triolein by hepatic triacylglycerol lipase purified from human post-heparin plasma. The hydrolyzing activities toward tributyrin and triolein were coeluted from heparin-Sepharose at an NaCl concentration of 0.7 M. The maximal velocity of hepatic triacylglycerol lipase (Vmax) for tributyrin was 17.9 mumol/mg protein per h and the Michaelis constant (Km) value was 0.12 mM, whereas the Vmax for triolein was 76 mumol/mg per h and the Km value was 2.5 mM. The hydrolyses of tributyrin and triolein by hepatic triacylglycerol lipase were inhibited to similar extends by procainamide, NaF, Zn2+, Cu2+, Mn2+, SDS and sodium deoxycholate. Triolein hydrolysis was inhibited by the addition of tributyrin. Triolein hydrolysis was also inhibited by the addition of dipalmitoylphosphaidylcholine vesicles. In contrast, the additions of triolein emulsified with Triton X-100 and dipalmitoylphosphatidylcholine vesicles enhanced the rate of tributyrin hydrolysis by hepatic triacylglycerol lipase. In the presence of dipalmitoylphosphatidylcholine, the Vmax and Km values of hepatic triacylglycerol lipase for tributyrin were 41 mumol/mg protein per h and 0.12 mM, respectively, indicating that the enhancement of hepatic triacylglycerol lipase activity for tributyrin by dipalmitoylphosphatidycholine vesicles was mainly due to increase in the Vmax. The enhancement of hepatic triacylglycerol lipase activity for tributyrin by phospholipid was not correlated with the amount of tributyrin associated with the phospholipid vesicles. On Bio-Gel A5m column chromatography, glycerol tri[1-14C]butyrate was not coeluted with triolein emulsion, and hepatic triacylglycerol lipase activity was associated with triolein emulsion even in the presence of 2 mM tributyrin. These results suggest that hepatic triacylglycerol lipase has a catalytic site for esterase activity and a separate site for lipid interface recognition, and that on binding to a lipid interface the conformation of the enzyme changes, resulting in enhancement of the esterase activity.     

Ionic liquid anchored substrate for enzyme catalysed kinetic resolution

A hydroxyl group appended task specific ionic liquid was designed and synthesised. The ionic liquid was used as a vehicle for the substrate of our interest for lipase catalysed kinetic resolution. The ionic liquid anchored ibuprofen underwent Candida antarctica lipase catalysed hydrolysis yielding the S-enantiomer. The strategy facilitated easy post-resolution isolation of the enantiomers and also carries the prospect of recyclability.     

Study on immunocapture-chemiluminescence assay of lipase activity in a biological sample.

A new approach for the determination of lipase (triacylglycerol lipase, EC.3.1.1.3) activity in a biological sample was investigated by combining an immunocapture technique with a chemiluminescence (CL) assay method in order to eliminate interference with CL detection. The proposed method consists of an immunocapture step to trap lipase and a subsequent step for CL detection of the activity of the captured lipase. The CL detection is based on the luminol-hydrogen peroxide (H(2)O(2))-horseradish peroxidase (HRP) reaction and utilizes a proenhancer substrate [a lauric acid ester of 2-(4-hydroxyphenyl)-4,5-diphenylimidazole (HDI)] which liberates an active enhancer, HDI, by enzymatic hydrolysis. A polyclonal antibody prepared with porcine pancreas lipase was used for the immunocapture. The proposed immunocapture-CL method effectively eliminated the interference with the CL reaction from biological components and enabled the determination of spiked porcine pancreas lipase activity in serum samples in the range 0.41-1.1 U(HDI) (1 U(HDI) corresponds to the amount which liberates 1 pmol HDI/min at 37 degrees C from the substrate). The method was further applied to the assay of the activity for human pancreas lipase in serum and the results showed good correlation (r = 0.871) with those by the conventional colorimetric method.     

A new macrocyclic tetraamine, 2,4-dinitrophenylcyclen (= 1-(2,4-dinitrophenyl)-1,4,7,10-tetraazacyclododecane):synthesis, cation reporter properties, and recognition of 1-methylthymine by its zinc(II) complex

A new functional macrocyclic ligand, 2,4-dinitrophenylcyclen (= 1-(2,4-dinitrophenyl)-1,4,7,10-tetraazacyclododecane), has been synthesized and isolated as its trihydrochloric acid salt (L·3HCl). The protonation constants (log K_n) for three secondary nitrogens of L were determined by potentiometric pH titration to be 10.10, 7.33 and <2 with I = 0.10 (NaNO₃) at 25°C. The 2,4-dinitrophenylaniline chromophore was proven to be a good reporter signaling proton- and metal-binding events in the macrocyclic cavity. The UV absorption band (λ_max 370 nm, 8200) of the 2,4-dinitrophenylaniline moiety at pH ≥ 9 becomes quenched as pH is lowered (to pH 3.1, where the major species is L·2H⁺), due to the strong protonation effect extended to the aniline moiety within the macrocyclic cavity. This is in sharp contrast to the pH-independent UV absorption (λ_max 390 nm, 14 000) of a reference compound, N,N-diethyl-2,4-dinitroaniline. The UV absorption band of L is shifted to lower wavelengths with Zn²⁺ (λ_max 320 nm), Cd²⁺ (λ_max 316 nm) and Pb²⁺ (λ_max 317 nm), while it almost disappears with Cu²⁺ and Ni²⁺. The 1:1 Zn²⁺ and Cu²⁺ complexes with L were isolated and characterized. The Zn²⁺ complex recognizes 1-methylthymine anion (MT⁻) in aqueous solution at physiological pH to yield a stable ternary complex ZnL-MT⁻. The X-ray crystal structure of ZnL-MT⁻ showed that Zn²⁺ is four-coordinate with three secondary nitrogens of L and the deprotonated imide anion that is cofacial to the 2,4-dinitrophenyl ring.     

Substrate specificity of human cathepsin D using internally quenched fluorescent peptides derived from reactive site loop of kallistatin

Kallistatin, a serpin that specifically inhibits human tissue kallikrein, was demonstrated to be cleaved at the Phe-Phe bond in its reactive site loop (RSL) by cathepsin D. Internally quenched fluorescent peptides containing the amino acid sequence of kallistatin RSL were highly susceptible to hydrolysis by cathepsin D. Surprisingly, these peptides were efficiently hydrolyzed at Phe-Phe bond, despite having Lys and Ser at P2 and P2' positions, respectively, which was reported to be very unfavorable for substrates for cathepsin D. Due to the importance of cathepsin D in several physiological and pathological processes, we took the peptide containing kallistatin RSL sequence, Abz-Ala-Ile-Lys-Phe-Phe-Ser-Arg-Gln-EDDnp, as a reference substrate for a systematic specificity study of S3 to S3' protease subsites (EDDnp=N-[2,4-dinitrophenyl]-ethylenediamine and Abz=ortho-amino benzoic acid). We present in this paper some internally quenched fluorescent peptides that were efficient substrates for cathepsin D. They essentially differ from other previously described substrates by their higher kcat/Km values due, mainly, to low Km values, such as the substrate Abz-Ala-Ile-Ala-Phe-Phe-Ser-Arg-Gln-EDDnp (Km=0.27 microM, kcat=16.25 s(-1), kcat/Km=60185 microM(-1) x s(-1)).     

Transesterification with Candida Cylindracea Lipase in a Biphasic Aqueous-Organic System. Dependence of the Enantiomeric Ratio and the Reaction Rate on the Proportions of Water and Cyclohexane

18 September 1989

A transesterification reaction between 1-phenyl ethyl butyrate and 1-heptanol was carried out with Candida cylindracea lipase. The reaction was studied, with respect to the reaction rate and the enantiomeric ratio at different proportions of water and cyclohexane. A significantly lower reaction rate was observed for incubations with less than 0.5% water compared with those at a higher water content. Transesterification dominated over hydrolysis as the main reaction even at 70% water and a dramatic increase of the enantioselectivity was observed at this high water content. It is proposed that these effects depend on the mechanism of lipase catalysis at the interface of emulsion droplets. This interface binding gives 1-heptanol a positional preference compared with water for nucleophilic attack of the acyl enzyme and may, in addition, induce an optimal conformation for high enantioselectivity of the enzyme.     

Chemiluminescence assay of lipase activity using a synthetic substrate as proenhancer for luminol chemiluminescence reaction.

A novel chemiluminescence (CL) assay method for lipase (triacylglycerol lipase, E.C.3.1.1.3) activity was developed by using the lauric acid ester of 2-(4-hydroxyphenyl)-4,5-diphenylimidazole (HDI) as a substrate. The method is based on the enhanced CL reaction of luminol-hydrogen peroxide-horseradish peroxidase (HRP) with HDI that is liberated from the substrate by enzymatic hydrolysis. To simplify the assay procedure, both the hydrolysis of the substrate and the enhanced CL reaction were performed in the same reaction mixture. Lipases from Candida cylindracea and porcine pancreas were successfully determined with the detection limits (blank signal + 3 SD) of 0.05 and 50.0 mU/tube, respectively. The method is simple and rapid, permitting the completion of single assay within 5 min. The reproducibilities obtained with replicate assays were relative standard deviations (RSDs) of <=> 4.7% for within-day and <=> 6.0% for between-day assays.     

Hydrolysis of triacylglycerol arachidonic and linoleic acid ester bonds by human pancreatic lipase and carboxyl ester lipase

The hydrolysis of polyenoic fatty acid ester bonds with pure human colipase-dependent lipase, with carboxyl ester lipase (CEL) and with these enzymes in combination was studied, using [3H]arachidonic- and [14C]linoleic acid-labelled rat chylomicrons as a model substrate. During the hydrolysis with colipase-dependent lipase, the amount of 3H appearing in 1,2-X-diacylglycerol (DG) markedly exceeded that of 14C. When CEL was added in addition this [3H]DG was efficiently hydrolyzed. CEL alone hydrolyzed the triacylglycerol (TG) at a low rate. The hydrolysis pattern with human duodenal content was similar to that seen with colipase-dependent lipase and CEL in combination. Increasing the concentration of taurodeoxycholate (TDC) and taurocholate (TC) or of TDC alone stimulated the hydrolysis of [3H]- and [14C]TG, but increased the accumulation of labelled DG that could act as substrate for CEL. It is suggested that very-long-chain polyenoic fatty acids of DG formed during the action of the colipase-dependent lipase on TG containing these fatty acids may be a physiological substrate for CEL.     

Peptidase specificity characterization of C- and N-terminal catalytic sites of angiotensin I-converting enzyme

Quenched fluorescence peptides were used to investigate the substrate specificity requirements for recombinant wild-type angiotensin I-converting enzyme (ACE) and two full-length mutants bearing a single functional active site (N- or C-domain). We assayed two series of bradykinin-related peptides flanked by o-aminobenzoic acid (Abz) and N-(2,4-dinitrophenyl)ethylenediamine (EDDnp), namely, Abz-GFSPFXQ-EDDnp and Abz-GFSPFRX-EDDnp (X = natural amino acids), in which the fluorescence appeared when Abz/EDDnp are separated by substrate hydrolysis. Abz-GFSPFFQ-EDDnp was preferentially hydrolyzed by the C-domain while Abz-GFSPFQQ-EDDnp exhibits higher N-domain specificity. Internally quenched fluorescent analogues of N-acetyl-SDKP-OH were also synthesized and assayed. Abz-SDK(Dnp)P-OH, in which Abz and Dnp (2,4-dinitrophenyl) are the fluorescent donor-acceptor pair, was cleaved at the D-K(Dnp) bond with high specificity by the ACE N-domain (k(cat)/K(m) = 1.1 microM(-)(1) s(-)(1)) being practically resistant to hydrolysis by the C-domain. The importance of hydroxyl-containing amino acids at the P(2) position for N-domain specificity was shown by performing the kinetics of hydrolysis of Abz-TDK(Dnp)P-OH and Abz-YDK(Dnp)P-OH. The peptides Abz-YRK(Dnp)P-OH and Abz-FRK(Dnp)P-OH which were hydrolyzed by wild-type ACE with K(m) values of 5.1 and 4.0 microM and k(cat) values of 246 and 210 s(-)(1), respectively, have been shown to be excellent substrates for ACE. The differentiation of the catalytic specificity of the C- and N-domains of ACE seems to depend on very subtle variations on substrate-specific amino acids. The presence of a free C-terminal carboxyl group or an aromatic moiety at the same substrate position determines specific interactions with the ACE active site which is regulated by chloride and seems to distinguish the activities of both domains.     

Effect of Brij 58 on the hydrolysis of methyl butyrate by lipase from Pseudomonas fluorescens

Purified Pseudomonas fluorescens lipase [EC 3.1.1.3] exhibited slight activity on water-soluble esters such as methyl butyrate, and this activity was increased on addition of Brij 58 (20 oxyethylene hexadecyl ether) to the solution. This stimulating effect of Brij 58 on hydrolysis of various esters (dimethyl succinate, butyl n-acetate, and tributyrin) in aqueous solution was unspecific. Hydrolysis of methyl butyrate depended on the molecular ratio of Brij 58 to lipase, being maximal (about 8 times the basal level at 37 degrees C with 80 mM substrate in 0.1 M NaCl solution) with 30 mol of Brij 58 per mol of lipase. Comparative studies showed that all polyoxyethylene (POE) alkyl ethers tested, stimulated the methyl butyrate hydrolyzing activity and that the Adekatol SO series (dihydric normal alcohol ethoxylate) also stimulated the appreciably active, whereas Triton X-100, sodium cholate, sodium deoxycholate, sodium dodecylsulfate, POE, and fatty acids had no effect. Comparison of the effects of Brij 58 on the methyl butyrate hydrolyzing activities of various lipolytic enzymes indicated that its effect was specific for this lipase. Brij 58 had no detectable effect with emulsified esters, such as supersaturated methyl butyrate and triolein.