Electronic Structure Engineering of LiCoO2 toward Enhanced Oxygen Electrocatalysis

Developing low‐cost and efficient electrocatalysts for the oxygen evolution reaction and oxygen reduction reaction is of critical significance to the practical application of some emerging energy storage and conversion devices (e.g., metal–air batteries, water electrolyzers, and fuel cells). Lithium cobalt oxide is a promising nonprecious metal‐based electrocatalyst for oxygen electrocatalysis; its activity, however, is still far from the requirements of practical applications. Here, a new LiCoO₂‐based electrocatalyst with nanosheet morphology is developed by a combination of Mg doping and shear force‐assisted exfoliation strategies toward enhanced oxygen reduction and evolution reaction kinetics. It is demonstrated that the coupling effect of Mg doping and the exfoliation can effectively modulate the electronic structure of LiCoO₂, in which Co³⁺ can be partially oxidized to Co⁴⁺ and the Co–O covalency can be enhanced, which is closely associated with the improvement of intrinsic activity. Meanwhile, the unique nanosheet morphology also helps to expose more active Co species. This work offers new insights into deploying the electronic structure engineering strategy for the development of efficient and durable catalysts for energy applications.     

Sandwich‐Like Reduced Graphene Oxide/Carbon Black/Amorphous Cobalt Borate Nanocomposites as Bifunctional Cathode Electrocatalyst in Rechargeable Zinc‐Air Batteries

The inhibitively high cost of the noble‐metal‐containing materials has become a major obstacle for the large‐scale application of rechargeable zinc‐air batteries (ZABs). To solve this problem in a practical way, a green and scalable method to prepare sandwich‐like reduced graphene oxide /carbon black/amorphous cobalt borate nanocomposites (rGO/CB/Co‐B_i) is reported. These composites are shown to be a highly efficient and robust bifunctional electrocatalyst for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). In this system, the spontaneous assembly of the GO sheet and CB nanoparticles is demonstrated by noncovalent interactions to build the sandwich‐like structure with hierarchical pore distribution. The impressive ORR and OER activities of the obtained nanocomposite are attributed to the high conductivity, large surface area, and the hierarchically porous channels. With room‐temperature synthesis and significant activities shown in the demonstrative battery test, the prepared nanocomposite can potentially serve as an alternative for noble‐metal‐based rechargeable ZAB cathode materials.     

Efficient Bifunctional Polyalcohol Oxidation and Oxygen Reduction Electrocatalysts Enabled by Ultrathin PtPdM (M = Ni,Fe, Co) Nanosheets

Despite intense research in past decades, the development of high‐performance bifunctional catalysts for direct ethylene glycol or glycerol oxidation reaction (EGOR or GOR) and oxygen reduction reaction (ORR) remains a grand challenge in realizing fuel‐cell technologies for portable electronic devices and fuel‐cell vehicle applications. Here, a general method is reported for controllable synthesis of a class of ultrathin multimetallic PtPdM (M = Ni, Fe, Co) nanosheets (NSs) with a thickness of only 1.4 nm by coreduction of metal precursors in the presence of CO and oleylamine. With the optimized composition and components, ultrathin Pt₃₂Pd₄₈Ni₂₀ NSs exhibit the highest electrocatalytic activity for EGOR, GOR, and ORR among all different ultrathin PtPdM NSs, ultrathin PtPd NSs, and the commercial catalysts. The mass activities of ultrathin Pt₃₂Pd₄₈Ni₂₀ NSs for EGOR, GOR, and ORR are 7.7, 5.4, and 7.7 times higher respectively than a commercial catalyst, and they are the most efficient nanocatalysts ever reported for EGOR/GOR. The ultrathin PtPdNi NSs are also very stable for EGOR/GOR/ORR. It is further demonstrated that these ultrathin multimetallic NSs can be readily generalized to other sensor‐related electrocatalysis system such as high‐sensitivity electrochemical detection of H₂O₂.     

A Triphasic Bifunctional Oxygen Electrocatalyst with Tunable and Synergetic Interfacial Structure for Rechargeable Zn‐Air Batteries

Atomic‐scale design of interfacial structure is an intriguing but challenging approach to developing efficient heterogenous catalysts for bifunctional oxygen electrocatalysis. Herein, an exquisite triphasic interfacial structure featuring the encapsulation of Fe_xNi alloy in a graphitic shell with a partial exposure of the FeO_y thin‐layered surface is manipulated via an electronic modulation strategy. The spontaneous integration of well‐crystallized metal alloy, carbon shell with a tunable active FeO_y layer, not only guarantees smooth charge transfer across the thin oxide layer, but also generates the synergistic effect at the interface, thus dramatically boosting the intrinsic activity of oxygen catalysis. Benefiting from these attributes, the hybrid catalyst outperforms the commercial noble‐metal benchmarks with a higher half‐wave potential of 0.890 V for oxygen reduction reaction and lower overpotential of 308 mV at 10 mA cm^?2 for the oxygen evolution reaction in alkaline media. Beyond that, a high‐performance rechargeable Zn‐air battery is realized with a narrow voltage gap of 0.742 V and excellent cyclability over 500 cycles at 10 mA cm^?2, demonstrating the great potential of the as‐developed triphasic electrocatalyst for practical applications.     

Graphdiyne: A Rising Star of Electrocatalyst Support for Energy Conversion

Graphdiyne (GDY), a rising star of 2D carbon allotropes with one‐atom‐thick planar layers, has achieved the coexistence of sp‐ and sp²‐hybridized carbon atoms in a 2D planar structure. In contrast to the prevailing carbon allotropes, GDY possesses Dirac cone structures, which endow it with unique chemical and physical properties, including an adjustable inherent bandgap, high‐speed charge carrier transfer efficiency, and excellent conductivity. Additionally, GDY also displays great potential in photocatalysis, rechargeable batteries, solar cells, detectors, and especially electrocatalysis. In this work, various GDY‐supported electrocatalysts are described and the reasons why GDY can act as a novel support are analyzed from the perspective of molecular structure, electronic properties, mechanical properties, and stability. The various electrochemical applications of GDY‐supported electrocatalysts in energy conversion such as hydrogen evolution reaction, oxygen evolution reaction, oxygen reduction reaction, overall water splitting, and nitrogen reduction reaction are reviewed. The challenges facing GDY and GDY‐based materials in future research are also outlined. This review aims at providing an in‐depth understanding of GDY and promoting the development and application of this novel carbon material.     

Electronic and Defective Engineering of Electrospun CaMnO3 Nanotubes for Enhanced Oxygen Electrocatalysis in Rechargeable Zinc–Air Batteries

Rational design and massive production of bifunctional catalysts with superior oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) activities are essential for developing metal–air batteries and fuel cells. Herein, controllable large‐scale synthesis of sulfur‐doped CaMnO₃ nanotubes is demonstrated via an electrospinning technique followed by calcination and sulfurization treatment. The sulfur doping can not only replace oxygen atoms to increase intrinsic electrical conductivity but also introduce abundant oxygen vacancies to provide enough catalytically active sites, which is further demonstrated by density functional theory calculation. The resulting sulfur‐modified CaMnO₃ (CMO/S) exhibits better electrocatalytic activity for ORR and OER in alkaline solution with higher stability performance than the pristine CMO. These results highlight the importance of sulfur treatment as a facile yet effective strategy to improve the ORR and OER catalytic activity of the pristine CaMnO₃. As a proof‐of‐concept, a rechargeable Zn–air battery using the bifunctional catalyst exhibits a small charge–discharge voltage polarization, and long cycling life. Furthermore, a solid‐state flexible and rechargeable Zn–air battery gives superior discharge–charge performance and remarkable stability. Therefore, the CMO/S nanotubes might be a promising replacement to the Pt‐based electrocatalysts for metal–air batteries and fuel cells.     

Trinary Layered Double Hydroxides as High‐Performance Bifunctional Materials for Oxygen Electrocatalysis

Layered double hydroxides (LDHs) are a family of high‐profile layer materials with tunable metal species and interlayer spacing, and herein the LDHs are first investigated as bifunctional electrocatalysts. It is found that trinary LDH containing nickel, cobalt, and iron (NiCoFe‐LDH) shows a reasonable bifunctional performance, while exploiting a preoxidation treatment can significantly enhance both oxygen reduction reaction and oxygen evolution reaction activity. This phenomenon is attributed to the partial conversion of Co²⁺ to Co³⁺ state in the preoxidation step, which stimulates the charge transfer to the catalyst surface. The practical application of the optimized material is demonstrated with a small potential hysteresis (800 mV for a reversible current density of 20 mA cm^?2) as well as a high stability, exceeding the performances of noble metal catalysts (commercial Pt/C and Ir/C). The combination of the electrochemical metrics and the facile and cost‐effective synthesis endows the trinary LDH as a promising bifunctional catalyst for a variety of applications, such as next‐generation regenerative fuel cells or metal–air batteries.     

High‐Performance Platinum‐Perovskite Composite Bifunctional Oxygen Electrocatalyst for Rechargeable Zn–Air Battery

Constructing highly active electrocatalysts with superior stability at low cost is a must, and vital for the large‐scale application of rechargeable Zn–air batteries. Herein, a series of bifunctional composites with excellent electrochemical activity and durability based on platinum with the perovskite Sr(Co_0.8Fe_0.2)_0.95P_0.05O_3?δ (SCFP) are synthesized via a facile but effective strategy. The optimal sample Pt‐SCFP/C‐12 exhibits outstanding bifunctional activity for the oxygen reduction reaction and oxygen evolution reaction with a potential difference of 0.73 V. Remarkably, the Zn–air battery based on this catalyst shows an initial discharge and charge potential of 1.25 and 2.02 V at 5 mA cm^?2, accompanied by an excellent cycling stability. X‐ray photoelectron spectroscopy, X‐ray absorption near‐edge structure, and extended X‐ray absorption fine structure experiments demonstrate that the superior performance is due to the strong electronic interaction between Pt and SCFP that arises as a result of the rapid electron transfer via the Pt? O? Co bonds as well as the higher concentration of surface oxygen vacancies. Meanwhile, the spillover effect between Pt and SCFP also can increase more active sites via lowering energy barrier and change the rate‐determining step on the catalysts surface. Undoubtedly, this work provides an efficient approach for developing low‐cost and highly active catalysts for wider application of electrochemical energy devices.     

Graphitic‐Shell Encapsulation of Metal Electrocatalysts for Oxygen Evolution,Oxygen Reduction,and Hydrogen Evolution in Alkaline Solution

Developing highly efficient, cost effective, and environmentally friendly electrocatalysts for the oxygen evolution reaction (OER), oxygen reduction reaction (ORR), and hydrogen evolution reaction (HER) is of interest for sustainable and clean energy technologies, including metal–air batteries and fuel cells. In this work, the screening of electrocatalytic activities of a series of single metallic iron, cobalt, and nickel nanoparticles and their binary and ternary alloys encapsulated in a graphitic carbon shell toward the OER, ORR, and HER in alkaline media is reported. Synthesis of these compounds proceeds by a two‐step sol–gel and carbothermal reduction procedure. Various ex situ characterizations show that with harsh electrochemical activation, the graphitic shell undergoes an electrochemical exfoliation. The modified electronic properties of the remaining graphene layers prevent their exfoliation, protect the bulk of the metallic cores, and participate in the electrocatalysis. The amount of near‐surface, higher‐oxidation‐state metals in the as‐prepared samples increases with electrochemical cycling, indicating that some metallic nanoparticles are not adequately encased within the graphite shell. Such surface oxide species provide secondary active sites for the electrocatalytic activities. The Ni–Fe binary system gives the most promising results for the OER, and the Co–Fe binary system shows the most promise for the ORR and HER.     

From Lithium‐Oxygen to Lithium‐Air Batteries: Challenges and Opportunities

Lithium ‐ air batteries have become a focus of research on future battery technologies. Technical issues associated with lithium‐air batteries, however, are rather complex. Apart from the sluggish oxygen reaction kinetics which demand efficient oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) catalysts, issues are also inherited from the nature of an open battery system and the use of reactive metal lithium as anode. Lithium‐air batteries, which exchange oxygen directly with ambient air, face more challenges due to the additional oxidative agents of moisture, carbon dioxide, etc. which degrade the metal lithium anode, deteriorating the performance of the batteries. In order to improve the cycling performance one must hold a full picture of lithium‐oxygen electrochemistry in the presence of carbon dioxide and/or moisture and fully understand the fundamentals of chemistry reactions therein. Recent advances in the exploration of the effect of moisture and CO₂ contaminants on Li‐O₂ batteries are reviewed, and the mechanistic understanding of discharge/charge process in O₂ at controlled level of moisture and/or CO₂ are illustrated. Prospects for development opportunities of Li‐air batteries, insight into future research directions, and guidelines for the further development of rechargeable Li‐air batteries are also given.     

Mimic the Photosystem II for Water Oxidation in Neutral Solution: A Case of Co3O4

The photosystem II (PSII) in green plants exhibits marvelous oxygen production in neutral environments. However, artificially developed oxygen evolution catalysts (OECs) show much less activity, and the oxygen evolution reaction (OER) is now becoming a bottleneck in many energy‐related issues. Here, the PSII is mimicked to design an efficient OER system in neutral environments by introducing an oleylamine (OAm) organic layer to cap the Co₃O₄ OEC, and employing buffers as proton shuttles in the system. Consequently, the activity is largely enhanced. The current density can reach 10 mA cm^?2 at an overpotential (η) of 390 mV in the best case in neutral environment. The turnover frequency is 0.0117 at η of 400 mV, almost the same as that in 1 m KOH solutions. The surface chemistry of the Co₃O₄ OEC indicates that the OAm can promote the activity. The reason that buffers as proton shuttles can greatly facilitate the reaction is ascribed to the proton‐coupled electron transfer process in the OER mechanism. These results may stimulate new perspectives on mimicking natural systems as well as new insights in electrocatalysis.     

Trifunctional Electrocatalysis on Dual‐Doped Graphene Nanorings–Integrated Boxes for Efficient Water Splitting and Zn–Air Batteries

Despite the exciting achievements made in synthesis of monofunctional electrocatalysts for oxygen reduction reaction (ORR), oxygen evolution reaction (OER), or hydrogen evolution reaction (HER), it is challenging to develop trifunctional electrocatalysts for both ORR/OER/HER. Herein, N, O‐codoped graphene nanorings‐integrated boxes (denoted NOGB) are crafted via high‐temperature pyrolysis and following acid etching of hybrid precursors containing polymers and Prussian blue analogue cubes. The electrochemical results signified that the resulting NOGB‐800 (800 refers to pyrolysis temperature) is highly active for trifunctional electrocatalysis of ORR/OER/HER. This can be reasonably attributed to the advanced nanostructures (i.e., the hierarchically porous nanostructures on the hollow nanorings) and unique chemical compositions (i.e., N, O‐codoped graphene). More attractively, the rechargeable Zn–air battery based on NOGB‐800 displays maximum power density of 111.9 mW cm^?2 with small charge–discharge potential of 0.72 V and excellent stability of 30 h, comparable with the Pt/C+Ir/C counterpart. The NOGB‐800 could also be utilized as bifunctional electrocatalysts for overall water splitting to yield current density of 10 mA cm^?2 at a voltage of 1.65 V, surpassing most reported electrocatalysts. Therefore, the NOGB‐800 is a promising candidate instead of precious metal–based electrocatalysts for the efficient Zn–air battery and water splitting.     

Efficiently Enhancing Oxygen Reduction Electrocatalytic Activity of MnO2 Using Facile Hydrogenation

Improving the electrocatalytic oxygen reduction reaction (ORR) activity of transition metal oxides is important for the development of non‐noble metal catalysts that are used in metal‐air batteries and fuel cells. Here, a novel facile strategy of hydrogenation to significantly enhance the ORR performance of MnO₂. The hydrogenated MnO₂ (H‐MnO₂), which is prepared through a simple heat treatment in hydrogen gas, shows characteristics of modified lattice/surface structures and increased electrical conductivity. In 0.1 M KOH aqueous solution, the prepared H‐MnO₂ exhibits high activity toward the oxygen electrocatalysis with more positive onset potential (≈60 mV), ≈14% larger of limiting current, lower yield of peroxide species, and better durability than the pristine oxide. Further conductivity testing and density functional theory (DFT) studies reveal the faster kinetics of ORR after hydrogenation is due to the formation of hydrogen bonds and altered microstructure and improved electronic properties. These results highlight the importance of hydrogenation as a facile yet effective strategy to improve the catalytic activity of transition metal oxides for ORR‐based applications.     

Carbon Nanodot Surface Modifications Initiate Highly Efficient,Stable Catalysts for Both Oxygen Evolution and Reduction Reactions

Efficient, stable, and low‐cost electrocatalysts for the oxygen evolution and reduction reactions (OER and ORR) are essential components of energy conversion. Although much progress has been achieved in the development of platinum‐based electrocatalysts for ORR and iridium‐based electrocatalysts for OER, they are still not yet viable for large‐scale commercialization because of the high cost and scanty supply of the noble metals. Here, it is demonstrated that carbon nanodots surface‐modified with either phosphorus or amidogen can respectively achieve electrocatalytic activity approaching that of the benchmark Pt/C and IrO₂ /C catalysts for ORR and OER. Furthermore, phosphorus (amidogen)‐modified carbon nanodots with attached Au nanoparticles exhibit superior ORR (OER) activity better than commercial Pt/C (IrO₂/C) catalysts as well as excellent electrochemical stability under visible light.     

Tuning Multimetallic Ordered Intermetallic Nanocrystals for Efficient Energy Electrocatalysis

Ordered intermetallic alloys have attracted extensive attention as advanced electrocatalysts for polymer electrolyte membrane fuel cells (PEMFCs) reactions with much improved activity and stability. Here, latest progress in tuning intermetallic Pt‐ and Pd‐based nanocrystals with tunable morphology and structure for catalyzing both the cathodic reduction of oxygen and anodic oxidation of fuels (e.g., methanol, ethanol and formic acid) in PEMFCs is highlighted. Making/tuning interesting intermetallic PtM (M = Fe, Co, Pb, Cu, etc.)‐based nanocrystals for boosting oxygen reduction reaction with high activity and stability by using/controlling high‐temperature annealing treatment is discussed. In all the reported Pt‐based intermetallic nanocrystals, controlling the degree of ordering under the proper high temperature treatment is the key for achieving the optimized electrocatalysis. In order to search for cheaper catalysts, the progress on making Pd‐based intermetallic nanocrystals is also discussed. Furthermore, future research directions are proposed and discussed to further enhance the efficiency of such unique intermetallic multimetallic nanocatalysts. This report aims to demonstrate the potential of ordered intermetallic strategy for boosting electrocatalysis and stimulating more research efforts in this field.     

A Facile Strategy to Construct Amorphous Spinel‐Based Electrocatalysts with Massive Oxygen Vacancies Using Ionic Liquid Dopant

Oxygen vacancies are demonstrated to be beneficial to various electrocatalytic reactions. However, integrating oxygen vacancies into an amorphous catalyst with a large specific surface area, and investigating its effect on the oxygen evolution reaction remains a great challenge. Herein, oxygen vacancies are introduced into an amorphous N, P, and F tri‐doped CoFe₂O₄ using ionic liquid as a dopant. Simultaneously, ultrafine MoS₂ nanoclusters are anchored onto its surface to increase the specific surface area. The vacancy‐rich MoS₂/NPF‐CoFe₂O₄ exhibits an overpotential of 250 mV and a small Tafel slope of 41 mV dec^?1, which is the best spinel‐based oxygen evolution reaction (OER) electrocatalysts so far. The excellent performance is attributed to massive oxygen vacancies, amorphous structure, large surface area, and synergistic coupling effects among active species. Density‐functional theory calculations reveal that the electronic structure of the catalyst can be modulated in the presence of heteroatoms and MoS₂ nanoclusters, and then the energy barriers of intermediates are decreased as well, which enhances the OER performance. This design not only provides a simple strategy to construct amorphous structures with abundant oxygen vacancies using ionic liquid‐dopants, but also presents an in‐depth insight into the OER mechanism in alkaline solution.     

Nitrogen‐Doped Porous Molybdenum Carbide and Phosphide Hybrids on a Carbon Matrix as Highly Effective Electrocatalysts for the Hydrogen Evolution Reaction

The efficient evolution of hydrogen through electrocatalysis is considered a promising approach to the production of clean hydrogen fuel. Platinum (Pt)‐based materials are regarded as the most active hydrogen evolution reaction (HER) catalysts. However, the low abundance and high cost of Pt hinders the large‐scale application of these catalysts. Active, inexpensive, and earth‐abundant electrocatalysts to replace Pt‐based materials would be highly beneficial to the production of cost‐effective hydrogen energy. Herein, a novel organoimido‐derivatized heteropolyoxometalate, Mo4‐CNP, is designed as a precursor for electrocatalysts of the HER. It is demonstrated that the carbon, nitrogen, and phosphorus sources derived from the Mo4‐CNP molecules lead to in situ confined carburization, phosphorization, and chemical doping on an atomic scale, thus forming nitrogen‐doped porous molybdenum carbide and phosphide hybrids, which exhibit remarkable electrocatalytic activity for the HER. Such an organically functionalized polyoxometalate‐assisted strategy described here provides a new perspective for the development of highly active non‐noble metal electrocatalysts for hydrogen evolution.     

Composites of a Prussian Blue Analogue and Gelatin‐Derived Nitrogen‐Doped Carbon‐Supported Porous Spinel Oxides as Electrocatalysts for a Zn–Air Battery

To date, most studies have focused only on the interaction between oxygen and the catalyst, with the intention of minimizing the mass‐transfer resistance by using the rotating disk electrode (RDE) method, which is based on the forced‐convection theory. To begin with, in order to increase the reaction rate, the oxygen should be able to reach the active sites of the catalyst readily (mass transfer). Next, a moderate (i.e., not too strong or weak) interaction (kinetics) should be maintained between the oxygen molecules and the catalyst, in order to allow for better adsorption and desorption. Therefore, these two factors should be taken into consideration when designing electrocatalysts for oxygen reduction. Further, there is bound to be a demand for large‐scale metal‐air batteries in the future. With these goals in mind, in this study, a facile and scalable method is developed for fabricating metal‐air batteries based on the fact that the Prussian blue analogue Mn₃[Co(CN)₆]₂?nH₂O and gelatin‐coated Ketjenblack carbon thermally decompose at 400 °C in air (i.e., without requiring high‐temperature pyrolysis under inert conditions) to form porous spinel oxides and N‐doped carbon materials. The intrinsic kinetics characteristics and the overall performance of the resulting catalysts are evaluated using the RDE method and a Zn‐air full cell, respectively.     

Earth‐Abundant Iron Diboride (FeB2) Nanoparticles as Highly Active Bifunctional Electrocatalysts for Overall Water Splitting

Developing efficient, durable, and earth‐abundant electrocatalysts for both hydrogen and oxygen evolution reactions is important for realizing large‐scale water splitting. The authors report that FeB₂ nanoparticles, prepared by a facile chemical reduction of Fe²⁺ using LiBH₄ in an organic solvent, are a superb bifunctional electrocatalyst for overall water splitting. The FeB₂ electrode delivers a current density of 10 mA cm^?2 at overpotentials of 61 mV for hydrogen evolution reaction (HER) and 296 mV for oxygen evolution reaction (OER) in alkaline electrolyte with Tafel slopes of 87.5 and 52.4 mV dec^?1, respectively. The electrode can sustain the HER at an overpotential of 100 mV for 24 h and OER for 1000 cyclic voltammetry cycles with negligible degradation. Density function theory calculations demonstrate that the boron‐rich surface possesses appropriate binding energy for chemisorption and desorption of hydrogen‐containing intermediates, thus favoring the HER process. The excellent OER activity of FeB₂ is ascribed to the formation of a FeOOH/FeB₂ heterojunction during water oxidation. An alkaline electrolyzer is constructed using two identical FeB₂‐NF electrodes as both anode and cathode, which can achieve a current density of 10 mA cm^?2 at 1.57 V for overall water splitting with a faradaic efficiency of nearly 100%, rivalling the integrated state‐of‐the‐art Pt/C and RuO₂/C.