Interactions of antimicrobial peptide from C-terminus of myotoxin II with phospholipid mono- and bilayers

Comparative studies of the effect of a short synthetic cationic peptide, pEM-2 (KKWRWWLKALAKK), derived from the C-terminus of myotoxin II from the venom of the snake Bothrops asper on phospholipid mono- and bilayers were performed by means of Langmuir Blodgett (LB) monolayer technique, atomic force microscopy and calcein leakage assay. Phospholipid mono- and bilayers composed of single zwitterionic or anionic phospholipids as well as lipid mixtures mimicking bacterial cell membrane were used. LB measurements indicate that the peptide binds to both anionic and zwitterionic phospholipid monolayers at low surface pressure but only to anionic at high surface pressure. Preferential interaction of the peptide with anionic phospholipid monolayer is also supported by a more pronounced change of the monolayer pressure/area isotherms induced by the peptide. AFM imaging reveals the presence of nanoscale aggregates in lipid/peptide mixture monolayers. At the same time, calcein leakage experiment demonstrated that pEM-2 induces stronger disruption of zwitterionic than anionic bilayers. Results of the study indicate that electrostatic interactions play a significant role in the initial recognition and binding of pEM-2 to the cell membrane. However, membrane rupturing activity of the peptide depends on interactions other than simple ionic attraction.     

Atomic force microscopy and force spectroscopy study of Langmuir-Blodgett films formed by heteroacid phospholipids of biological interest

Langmuir-Blodgett (LB) films of two heteroacid phospholipids of biological interest 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC), as well as a mixed monolayer with chi(POPC)=0.4, were transferred onto mica in order to investigate by a combination of atomic force microscopy (AFM) and force spectroscopy (FS) their height, and particularly, their nanomechanical properties. AFM images of such monolayers extracted at 30 mN m(-1) revealed a smooth and defect-free topography except for the POPE monolayer. Since scratching such soft monolayers in contact mode was proved unsuccessful, their molecular height was measured by means of the width of the jump present in the respective force-extension curves. While for pure POPC a small jump occurs near zero force, for the mixed monolayer with chi(POPC)=0.4 the jump occurs at approximately 800 pN. Widths of approximately 2 nm could be established for POPC and chi(POPC)=0.4, but not for POPE monolayer at this extracting pressure. Such different mechanical stability allowed us to directly measure the threshold area/lipid range value needed to induce mechanical stability to the monolayers. AFM imaging and FS were next applied to get further structural and mechanical insight into the POPE phase transition (LC-LC') occurring at pressures >36.5 mN m(-1). This phase transition was intimately related to a sudden decrease in the area/molecule value, resulting in a jump in the force curve occurring at high force ( approximately 1.72 nN). FS reveals to be the unique experimental technique able to unveil structural and nanomechanical properties for such soft phospholipid monolayers. The biological implications of the nanomechanical properties of the systems under investigation are discussed considering that the annular phospholipids region of some transmembrane proteins is enriched in POPE.     

Biophysical properties of a synthetic transit peptide from wheat chloroplast ribulose 1,5-bisphosphate carboxylase.

The surface properties of pure RuBisCo transit peptide (RTP) and its interaction with zwitterionic, anionic phospholipids and chloroplast lipids were studied by using the Langmuir monolayer technique. Pure RTP is able to form insoluble films and the observed surface parameters are compatible with an alpha-helix perpendicular to the interface. The alpha-helix structure tendency was also observed by using transmission FT-IR spectroscopy in bulk system of a membrane mimicking environment (SDS). On the other hand, RTP adopts an unordered structure in either aqueous free interface or in the presence of vesicles composed of a zwitterionic phospholipid (POPC). Monolayer studies show that in peptide/lipid mixed monolayers, RTP shows no interaction with zwitterionic phospholipids, regardless of their physical state. Also, with the anionic POPG at high peptide ratios RTP retains its individual surface properties and behaves as an immiscible component of the peptide/lipid mixed interface. This behaviour was also observed when the mixed films were composed by RTP and the typical chloroplast lipids MGDG or DGDG (mono- and di-galactosyldiacylglycerol). Conversely, RTP establishes a particular interaction with phosphatidylglycerol and cardiolipin at low peptide to lipid area covered relation. This interaction takes place with an increase in surface stability and a reduction in peptide molecular area (intermolecular interaction). Data suggest a dynamic membrane modulation by which the peptide fine-tunes its membrane orientation and its lateral stability, depending on the quality (lipid composition) of the interface.     

Topology and lipid selectivity of pulmonary surfactant protein SP-B in membranes: Answers from fluorescence

Contradictory results have been reported with respect to the depth of penetration and the orientation of pulmonary surfactant protein SP-B in phospholipid membranes and its relative selectivity to interact with anionic over zwitterionic phospholipid species. In the present study we have re-evaluated lipid-protein interactions of SP-B by analysing F?rster resonance energy transfer (FRET) efficiencies, obtained from time-resolved measurements, from the single tryptophan in SP-B to different fluorescently labelled phospholipids in matrix bilayers made of either pure phosphatidylcholine (POPC) or the full lipid extract obtained from purified surfactant. In the background of POPC membranes SP-B exhibits a certain level of selectivity for anionic fluorescent phospholipids over the corresponding zwitterionic analogues, but apparently no preference for phosphatidylglycerol over other anionic species such as phosphatidylserine. No selectivity was detected in membranes made of full surfactant lipids, indicating that specific lipid-protein binding sites could already be occupied by endogenous anionic phospholipids. Furthermore, we have analysed the fit of two different models of how SP-B could be orientated with respect to phospholipid membrane surfaces to the FRET data. The FRET results are consistent with topology models in which the protein has a superficial orientation, with no regions of exclusion by the protein to the access of phospholipids, both in POPC membranes and in membranes made of the whole surfactant lipid fraction. This discards a deep penetration of the protein into the core of bilayers and suggests that most hydrophobic segments of SP-B could participate in protein-protein instead of lipid-protein interactions.     

Partitioning of 1-pyrenesulfonate into zwitterionic and mixed zwitterionic/anionic fluid phospholipid bilayers

Molecular partitioning into biomembranes is of fundamental importance in diverse biochemical processes and reactions. The majority of aqueous/membrane partition data using model membrane systems, is obtained with pure phosphatidylcholine bilayers, being lipid mixtures less used, while studies involving bilayers containing zwitterionic/anionic mixtures of phospholipids are even more scarce. In this study, the solvatochromic effects of 1-pyrenesulfonate observed at 375 nm in aqueous liposome suspensions, and monitored by second derivative absorption spectrophotometry, enabled the determination of its partition constants into defined phospholipid bilayers. We compare, under cautiously settled experimental conditions, the partition of the anionic amphiphile PSA into fluid zwitterionic bilayers of POPC (Kp=6.7 x 10(3), at 25 degrees C), and into fluid mixed zwitterionic/anionic bilayers containing small proportions of anionic phospholipids. At the same temperature, we found increasing K(p) values in parallel with the proportion of POPS mixed with POPC (Kp=3.4 x 10(4) and Kp=7.3 x 10(4), with 5 and 10 mol% of POPS, respectively). Our interpretation is based on the interfacial properties of fluid and flexible mixed zwitterionic/anionic phospholipid bilayers.     

Interfacial behavior of phospholipid monolayers revealed by mesoscopic simulation

A mesoscopic model with molecular resolution is presented for dipalmitoyl phosphatidylcholine (DPPC) and palmitoyl oleoyl phosphatidylcholine (POPC) monolayer simulations at the air-water interface using many-body dissipative particle dynamics (MDPD). The parameterization scheme is rigorously based on reproducing the physical properties of water and alkane and the interfacial property of the phospholipid monolayer by comparison with experimental results. Using much less computing cost, these MDPD simulations yield a similar surface pressure-area isotherm as well as similar pressure-related morphologies as all-atom simulations and experiments. Moreover, the compressibility modulus, order parameter of lipid tails, and thickness of the phospholipid monolayer are quantitatively in line with the all-atom simulations and experiments. This model also captures the sensitive changes in the pressure-area isotherms of mixed DPPC/POPC monolayers with altered mixing ratios, indicating that the model is promising for applications with complex natural phospholipid monolayers. These results demonstrate a significant improvement of quantitative phospholipid monolayer simulations over previous coarse-grained models.     

Evidence for heterodimers of 2,4,5-trichlorophenol on planar lipid layers. A FTIR-ATR investigation

Trichlorophenols are weak acids of high hydrophobicity and are able to transport protons across the mitochondrial membrane. Thus the proton motive force is dissipated and the ATP production decreased. In situ Fourier Transform Infrared-Attenuated Total Reflection (FTIR-ATR) experiments with 2,4,5-trichlorophenol (TCP) adsorbed to model membranes resulted in good evidence for the formation of the TCP-heterodimer. Two surfaces were examined: a dipalmitoyl phosphatidic acid (DPPA) monolayer and a planar DPPA/1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) bilayer. TCP was adsorbed from 1 to 3 mM solutions at pH 6.0 to the lipid layers leading to surface layers at the water/lipid interface. Difference spectra showed an effect on DPPA acyl chains even when it was covered with POPC. Time-resolved measurements revealed two distinct adsorption processes, which were assigned to TCP and its deprotonated anion (phenoxide), respectively. For DPPA/POPC bilayers, the adsorption of TCP was faster than that of its phenoxide, whereas adsorption of both species to DPPA monolayers proceeded with similar velocity. In both cases, phenoxide formation at the membrane was found to be delayed with respect to phenol adsorption. Phenoxide and phenol were retained after replacing the TCP solution with buffer. For the retained species, we estimated a phenol/phenoxide molar ratio of 1 at pH 6.0 (pKa=6.94 for TCP), demonstrating strong evidence for heterodimer formation.     

Evidence for heterodimers of 2,4,5-trichlorophenol on planar lipid layers. A FTIR-ATR investigation

Trichlorophenols are weak acids of high hydrophobicity and are able to transport protons across the mitochondrial membrane. Thus the proton motive force is dissipated and the ATP production decreased. In situ Fourier Transform Infrared-Attenuated Total Reflection (FTIR-ATR) experiments with 2,4,5-trichlorophenol (TCP) adsorbed to model membranes resulted in good evidence for the formation of the TCP-heterodimer. Two surfaces were examined: a dipalmitoyl phosphatidic acid (DPPA) monolayer and a planar DPPA/1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) bilayer. TCP was adsorbed from 1 to 3 mM solutions at pH 6.0 to the lipid layers leading to surface layers at the water/lipid interface. Difference spectra showed an effect on DPPA acyl chains even when it was covered with POPC. Time-resolved measurements revealed two distinct adsorption processes, which were assigned to TCP and its deprotonated anion (phenoxide), respectively. For DPPA/POPC bilayers, the adsorption of TCP was faster than that of its phenoxide, whereas adsorption of both species to DPPA monolayers proceeded with similar velocity. In both cases, phenoxide formation at the membrane was found to be delayed with respect to phenol adsorption. Phenoxide and phenol were retained after replacing the TCP solution with buffer. For the retained species, we estimated a phenol/phenoxide molar ratio of 1 at pH 6.0 (pK_a=6.94 for TCP), demonstrating strong evidence for heterodimer formation.     

Interaction of the N-terminal segment of pulmonary surfactant protein SP-C with interfacial phospholipid films

Pulmonary surfactant protein SP-C is a 35-residue polypeptide composed of a hydrophobic transmembrane alpha-helix and a polycationic, palmitoylated-cysteine containing N-terminal segment. This segment is likely the only structural motif the protein projects out of the bilayer in which SP-C is inserted and is therefore a candidate motif to participate in interactions with other bilayers or monolayers. In the present work, we have detected intrinsic ability of a peptide based on the sequence of the N-terminal segment of SP-C to interact and insert spontaneously into preformed zwitterionic or anionic phospholipid monolayers. The peptide expands the π-A compression isotherms of interfacial phospholipid/peptide films, and perturbs the lipid packing of phospholipid films during compression-driven liquid-expanded to liquid-condensed lateral transitions, as observed by epifluorescence microscopy. These results demonstrate that the sequence of the SP-C N-terminal region has intrinsic ability to interact with, insert into, and perturb the structure of zwitterionic and anionic phospholipid films, even in the absence of the palmitic chains attached to this segment in the native protein. This effect has been related with the ability of SP-C to facilitate reinsertion of surface active lipid molecules into the lung interface during respiratory compression-expansion cycling.     

Interaction of the N-terminal segment of pulmonary surfactant protein SP-C with interfacial phospholipid films

Pulmonary surfactant protein SP-C is a 35-residue polypeptide composed of a hydrophobic transmembrane alpha-helix and a polycationic, palmitoylated-cysteine containing N-terminal segment. This segment is likely the only structural motif the protein projects out of the bilayer in which SP-C is inserted and is therefore a candidate motif to participate in interactions with other bilayers or monolayers. In the present work, we have detected intrinsic ability of a peptide based on the sequence of the N-terminal segment of SP-C to interact and insert spontaneously into preformed zwitterionic or anionic phospholipid monolayers. The peptide expands the pi-A compression isotherms of interfacial phospholipid/peptide films, and perturbs the lipid packing of phospholipid films during compression-driven liquid-expanded to liquid-condensed lateral transitions, as observed by epifluorescence microscopy. These results demonstrate that the sequence of the SP-C N-terminal region has intrinsic ability to interact with, insert into, and perturb the structure of zwitterionic and anionic phospholipid films, even in the absence of the palmitic chains attached to this segment in the native protein. This effect has been related with the ability of SP-C to facilitate reinsertion of surface active lipid molecules into the lung interface during respiratory compression-expansion cycling.     

Interactions of chlorpromazine with phospholipid monolayers: effects of the ionization state of the drug

Molecular dynamics simulations have been performed to investigate the interactions between chlorpromazine (CPZ) and Langmuir monolayers of the zwitterionic dipalmitoylphosphatidylcholine (DPPC) and the anionic dipalmitoylphosphatidylglycerol (DPPG). Simulations for a fixed surface density and different charge states - neutral and protonated CPZ - were able to capture important features of the CPZ-phospholipid monolayer interaction. Neutral CPZ is predominantly found in the hydrophobic tail region, whereas protonated CPZ is located at the lipid-water interface. Specific interactions (hydrogen bonds) between protonated CPZ and the lipid head groups were found for both zwitterionic and anionic monolayers. We computed lipid tail order parameters and investigated the effects of the drug upon tail ordering. We also computed electrostatic surface potentials and found qualitative good agreement with experimental results.     

Phospholipid Composition of Membranes Directs Prions Down Alternative Aggregation Pathways

Prion diseases are neurodegenerative disorders of the central nervous system that are associated with the misfolding of the prion protein (PrP). PrP is glycosylphosphatidylinositol-anchored, and therefore the hydrophobic membrane environment may influence the process of prion conversion. This study investigates how the morphology and mechanism of growth of prion aggregates on membranes are influenced by lipid composition. Atomic force microscopy is used to image the aggregation of prions on supported lipid bilayers composed of mixtures of the zwitterionic lipid, 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) and the anionic lipid, 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoserine (POPS). Circular dichroism shows that PrP interactions with POPS membranes result in an increase in β-sheet structure, whereas interactions with POPC do not influence PrP structure. Prion aggregation is observed on both zwitterionic and anionic membranes, and the morphology of the aggregates formed is dependent on the anionic phospholipid content of the membrane. The aggregates that form on POPC membranes have uniform dimensions and do not disrupt the lipid bilayer. The presence of POPS results in larger aggregates with a distinctive sponge-like morphology that are disruptive to membranes. These data provide detailed information on the aggregation mechanism of PrP on membranes, which can be described by classic models of growth.     

Binding,folding and insertion of a β-hairpin peptide at a lipid bilayer surface: Influence of electrostatics and lipid tail packing

Antimicrobial peptides (AMPs) act as host defenses against microbial pathogens. Here we investigate the interactions of SVS-1 (KVKVKVKV^dP^lPTKVKVKVK), an engineered AMP and anti-cancer β-hairpin peptide, with lipid bilayers using spectroscopic studies and atomistic molecular dynamics simulations. In agreement with literature reports, simulation and experiment show preferential binding of SVS-1 peptides to anionic over neutral bilayers. Fluorescence and circular dichroism studies of a Trp-substituted SVS-1 analogue indicate, however, that it will bind to a zwitterionic DPPC bilayer under high-curvature conditions and folds into a hairpin. In bilayers formed from a 1:1 mixture of DPPC and anionic DPPG lipids, curvature and lipid fluidity are also observed to promote deeper insertion of the fluorescent peptide. Simulations using the CHARMM C36m force field offer complementary insight into timescales and mechanisms of folding and insertion. SVS-1 simulated at an anionic mixed POPC/POPG bilayer folded into a hairpin over a microsecond, the final stage in folding coinciding with the establishment of contact between the peptide's valine sidechains and the lipid tails through a “flip and dip” mechanism. Partial, transient folding and superficial bilayer contact are seen in simulation of the peptide at a zwitterionic POPC bilayer. Only when external surface tension is applied does the peptide establish lasting contact with the POPC bilayer. Our findings reveal the influence of disruption to lipid headgroup packing (via curvature or surface tension) on the pathway of binding and insertion, highlighting the collaborative effort of electrostatic and hydrophobic interactions on interaction of SVS-1 with lipid bilayers.     

The influence of plant hormones on phospholipid monolayer stability

The influence of hormones in water subphase on the stability of monolayers built of phospholipid mixtures extracted from embryogenic (PLE) and nonembryogenic (PLNE) wheat calli was examined. Additionally, experiments on individual lipids, dipalmitoylphosphatidylcholine (DPPC) and dipalmitoylphosphatidic acid (DPPA), were performed. DPPC was chosen because it was the main phospholipid present in both calli. Negatively charged DPPA could mimic a negatively charged natural mixture of lipids. As hormones, auxins (IAA and 2,4-D), cytokinins (zeatin and kinetin) and zearalenone were chosen. The time of monolayer stability for PLNE calli was much longer than for PLE calli. Kinetics of monolayer stability of PLNE was similar to DPPA, whereas that of PLE was similar to DPPC. Generally, hormones increased the time after which the monolayer stability was reached and decreased the surface pressure. The greatest effect was observed for auxins (especially IAA), whereas cytokinins affected the monolayer stability to a lesser degree.     

Simulations of zwitterionic and anionic phospholipid monolayers

Results of atomistic molecular dynamics simulations of dipalmitoylphosphatidylcholine and dipalmitoylphosphatidylglycerol monolayers at the air/water interface are presented. Dipalmitoylphosphatidylcholine is zwitterionic and dipalmitoylphosphatidylglycerol is anionic at physiological pH. NaCl and CaCl2 water subphases are simulated. The simulations are carried out at different surface densities, and a simulation cell geometry is chosen that greatly facilitates the investigation of phospholipid monolayer properties. Ensemble average monolayer properties calculated from simulation are in agreement with experimental measurements. The dependence of the properties of the monolayers on the surface density, the type of the headgroup, and the ionic environment are explained in terms of atomistically detailed pair distribution functions and electron density profiles, demonstrating the strength of simulations in investigating complex, multicomponent systems of biological importance.     

Surface behaviour and peptide-lipid interactions of the antibiotic peptides, Maculatin and Citropin

Surface behaviour of Maculatin 1.1 and Citropin 1.1 antibiotic peptides have been studied using the Langmuir monolayer technique in order to understand the peptide-membrane interaction proposed as critical for cellular lysis. Both peptides have a spontaneous adsorption at the air-water interface, reaching surface potentials similar to those obtained by direct spreading. Collapse pressures (Pi(c), stability to lateral compression), molecular areas at maximal packing and surface potentials (DeltaV) obtained from compression isotherms of both pure peptide monolayers are characteristic of peptides adopting mainly alpha-helical structure at the interface. The stability of Maculatin monolayers depended on the subphase and increased when pH was raised. In an alkaline environment, Maculatin exhibits a molecular reorganization showing a reproducible discontinuity in the Pi-A compression isotherm. Both peptides in lipid films with the zwitterionic palmitoyl-oleoyl-phosphatidylcholine (POPC) showed an immiscible behaviour at all lipid-peptide proportions studied. By contrast, in films with the anionic palmitoyl-oleoyl-phosphatidylglycerol (POPG), the peptides showed miscible behaviour when the peptides represented less than 50% of total surface area. Additional penetration experiments also demonstrated that both peptides better interact with POPG compared with POPC monolayers. This lipid preference is discussed as a possible explanation of their antibiotic properties.     

Lipid model membranes for drug interaction study

The present work shows a structural study on the process of incorporation of a hydrophobic drug, Ellipticine (ELPT), into lipid model membranes for drug targeting purpose. The ELPT is an alkaloid that showed an anti-proliferation activity against several types of tumor cells and against the HIV1 virus. We used the zwitterionic lipid dipalmitoyl phosphatidylcholine (DPPC) and four different anionic lipids: cardiolipin (CL), dipalmitoyl phosphatidic acid (DPPA), dipalmitoyl phosphatidylglycerol (DPPG) and dipalmitoyl phosphatidylserine (DPPS), both spread on a Langmuir monolayer and deposited on a solid substrate to mimic a model membrane and study the interaction with the drug ELPT. X-ray reflectivity results pointed toward an increase in drug loading efficiency up to 13.5% mol/mol of ELPT into mixed systems DPPC/CL. This increase in loading efficiency was also accompanied by a slight distortion in the stacking of the bilayers less evidenced after optimization of the molar ratio between the co-lipids. Grazing incidence X-ray diffraction measurements revealed an in-plane lattice distortion due to the presence of hydrocarbon chain backbone ordering in pure systems of DPPC doped with ELPT. The same was not observed in mixed membranes with DPPC/CL and DPPC/DPPA.     

Changes in stability of the DPPC monolayer during its contact with the liquid phase

The Langmuir-Blodgett (LB) method was applied and a few series of advancing and receding contact angles measurements as a function of time were performed to examine stability of model phospholipid monolayers during their contact with water, formamide and diiodomethane droplets. The studied monolayer was single-component saturated phospholipid 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) transferred onto mica surface. When the time of the contact angle measurements is prolonged in these systems, some changes in the DPPC layer structure occur due to the contact with probing liquid, especially water, which is reflected in the changes of measured contact angle. Generally, with increasing time of the droplet contact with DPPC monolayer the contact angle decreases. Some correlation between the contact angle decrease and molecular rearrangements of initially hydrophobic DPPC monolayer is observed if it comes into contact with water. On the other hand, the contact angle completed within the first few seconds can faithfully reflect the original structure of the layer, and thus its energetic state, because during this time the structure changes are insignificant. Basing on the measured contact angles the monolayer's apparent surface free energy and its components, corresponding to different contact times of the droplets, were calculated. These results are helpful for better characterization of the processes taking place in the phospholipid layers being in contact with polar (water and formamide) and nonpolar (diiodomethane) liquids.     

Cholesterol oxidase susceptibility of cholesterol and 5-androsten-3 beta-ol in pure sterol monolayers and in mixed monolayers containing 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine.

This study has examined the importance of the isocaproic side chain at C-17 of cholesterol to sterol/phospholipid interactions in monolayer membranes and to the cholesterol oxidase-susceptibility of cholesterol in pure and mixed monolayers at the air/water interface. The interactions between cholesterol or 5-androsten-3 beta-ol (which lacks the C-17 side chain) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) in monolayers indicated that 5-androsten-3 beta-ol was not very efficient in causing condensation of the monolayer packing of POPC. Whereas cholesterol condensed the packing of POPC at all molar fractions examined (i.e., 0.25, 0.50 and 0.75 with regard to POPC), 5-androsten-3 beta-ol caused a slight condensing effect on POPC packing only in the equimolar mixture. The mean molecular area requirement of 5-androsten-3 beta-ol (in pure sterol monolayers at different lateral surface pressures) was 2.2-6.7% less than that observed for cholesterol. The pure 5-androsten-3 beta-ol monolayer also collapsed at lower lateral surface pressures compared with the pure cholesterol monolayer (34 mN/m and 45 mN/m, respectively). The cholesterol oxidase (Streptomyces sp.) catalyzed oxidation of cholesterol or 5-androsten-3 beta-ol in pure monolayers in the air/water interface (10 mN/m) proceeded with very similar rates, indicating that the enzyme did not recognize that the C-17 side chain of 5-androsten-3 beta-ol was missing. The oxidation of cholesterol or 5-androsten-3 beta-ol in mixed POPC-containing monolayers (equimolar mixture) also revealed similar reaction rates, although the reaction was slower in the mixed monolayer compared with the pure sterol monolayer. When the oxidation of cholesterol and 5-androsten-3 beta-ol was examined by monitoring the production of H2O2 (the sterol was solubilized in 2-propanol and the assay conducted in phosphate buffer), the maximal reaction rate observed with 5-androsten-3 beta-ol was only about 41% of that measured with cholesterol. From the cholesterol oxidase point-of-view, it can be concluded that the enzyme did not recognize the C-17 side chain of cholesterol (or lack of it in 5-androsten-3 beta-ol), when the sterol was properly oriented as a monolayer at the air/water interface. However, when the substrate was presented to the enzyme in a less controlled orientation (organic solvent in water), 5-androsten-3 beta-ol may have oriented itself unfavorably compared with the orientation of cholesterol, thereby leading to slower oxidation rates.     

Isothermal titration calorimetry studies of the binding of a rationally designed analogue of the antimicrobial peptide gramicidin s to phospholipid bilayer membranes

The binding of the positively charged antimicrobial peptide cyclo[VKLdKVdYPLKVKLdYP] (GS14dK4) to various lipid bilayer model membranes was investigated using isothermal titration calorimetry. GS14dK4 is a diastereomeric lysine ring-size analogue of the naturally occurring antimicrobial peptide gramicidin S which exhibits enhanced antimicrobial and markedly reduced hemolytic activities compared with GS itself. Large unilamellar vesicles composed of various zwitterionic (1-palmitoyl-2-oleoyl-sn-glycero-3-phosphorylcholine [POPC]) and anionic phospholipids {1-palmitoyl-2-oleoyl-sn-glycero-3-[phospho-rac-(glycerol)] [POPG] and 1-palmitoyl-2-oleoyl-sn-glycero-3-[phosphoserine] [POPS]}, with or without cholesterol, were used as model membrane systems. Dynamic light scattering results indicate the absence of any peptide-induced major alteration in vesicle size or vesicle fusion under our experimental conditions. The binding of GS14dK4 is significantly influenced by the surface charge density of the phospholipid bilayer and by the presence of cholesterol. Specifically, a significant reduction in the degree of binding occurs when three-fourths of the anionic lipid molecules are replaced with zwitterionic POPC molecules. No measurable binding occurs to cholesterol-containing zwitterionic vesicles, and a dramatic drop in binding is observed in the cholesterol-containing anionic POPG and POPS membranes, indicating that the presence of cholesterol markedly reduces the affinity of this peptide for phospholipid bilayers. The binding isotherms can be described quantitatively by a one-site binding model. The measured endothermic binding enthalpy (DeltaH) varies dramatically (+6.3 to +26.5 kcal/mol) and appears to be inversely related to the order of the phospholipid bilayer system. However, the negative free energy (DeltaG) of binding remains relatively constant (-8.5 to -11.5 kcal/mol) for all lipid membranes examined. The relatively small variation of negative free energy of peptide binding together with a pronounced variation of positive enthalpy produces an equally strong variation of TDeltaS (+16.2 to +35.0 kcal/mol), indicating that GS14dK4 binding to phospholipids bilayers is primarily entropy driven.