The use of fluoresceinphosphatidylethanolamine (FPE) as a real-time probe for peptide-membrane interactions

The characterization of fluorescelnphosphatidylethanolamlne (FPE) as a real-time Indicator of the electrostatic nature of a membrane surface is described. The conditions appropriate for the labelling of membranes and the implementation of FPE as a tool to monitor the interactions of various peptides with model membranes are outlined. It is shown that of the membrane-active peptides studied, Naja naja kaouthla cardiotoxin and pyrularia thionin bind to certain model membranes without insertion. Whereas the leader sequence of the nuclear encoded subunit IV of mammalian cytochrome c oxidase (E.C. 1.9.3.1), known as p-25, and melittin appear to bind and then partially insert into the membrane. It seems evident also that melittin does not adopt a fully transmembrane configuration. Melittin is known to promote membrane lysis and by employing a rapid-kinetic technique it is shown that the time-course of such lysis does not appear to correlate with peptide binding, but following binding a significant proportion of melittin must become inserted into the membrane before lysis appears to commence.     

Primary structure of peptides and ion channels. Role of amino acid side chains in voltage gating of melittin channels.

Melittin produces a voltage-dependent increase in the conductance of planar lipid bilayers. The conductance increases when the side of the membrane to which melittin has been added (cis-side) is made positive. This paper reports observations on the effect of modifying two positively charged amino acid residues within the NH2-terminal region of the molecule: lysine at position 7 (K7), and the NH2-terminal glycine (G1). We have synthesized melittin analogues in which K7 is replaced by asparagine (K7-N), G1 is blocked by a formyl group (G1-f), and in which both modifications of the parent compound were introduced (G1-f, K7-N). The time required to reach peak conductance during a constant voltage pulse was shorter in membranes exposed to the analogues than in membranes modified by melittin. The apparent number of monomers producing a conducting unit for [K7-N]-melittin and [G1-f]-melittin, eight, was found to be greater than the one for [G1-f], K7-N]-melittin and for melittin itself, four. The apparent gating charge per monomer was less for the analogues, 0.5-0.3 than for melittin, one. Essentially similar results were obtained with melittin analogues in which the charge on K7 or G1 or both was blocked by an uncharged N-linked spin label. These results show that the positive charges in the NH2-terminal region of melittin play a major but not exclusive role in the voltage gating of melittin channels in bilayers.     

Analysis of antimicrobial peptide interactions with hybrid bilayer membrane systems using surface plasmon resonance

The lipid binding behaviour of the antimicrobial peptides magainin 1, melittin and the C-terminally truncated analogue of melittin (21Q) was studied with a hybrid bilayer membrane system using surface plasmon resonance. In particular, the hydrophobic association chip was used which is composed of long chain alkanethiol molecules upon which liposomes adsorb spontaneously to create a hybrid bilayer membrane surface. Multiple sets of sensorgrams with different peptide concentrations were generated. Linearisation analysis and curve fitting using numerical integration analysis were performed to derive estimates for the association (k(a)) and dissociation (k(d)) rate constants. The results demonstrated that magainin 1 preferentially interacted with negatively charged dimyristoyl-L-alpha-phosphatidyl-DL-glycerol (DMPG), while melittin interacted with both zwitterionic dimyristoyl-L-alpha-phosphatidylcholine and anionic DMPG. In contrast, the C-terminally truncated melittin analogue, 21Q, exhibited lower binding affinity for both lipids, showing that the positively charged C-terminus of melittin greatly influences its membrane binding properties. Furthermore the results also demonstrated that these antimicrobial peptides bind to the lipids initially via electrostatic interactions which then enhances the subsequent hydrophobic binding. The biosensor results were correlated with the conformation of the peptides determined by circular dichroism analysis, which indicated that high alpha-helicity was associated with high binding affinity. Overall, the results demonstrated that biosensor technology provides a new experimental approach to the study of peptide-membrane interactions through the rapid determination of the binding affinity of bioactive peptides for phospholipids.     

Membrane interactions of the putative fusion peptide (MFalphaP) from fertilin-alpha,the mouse sperm protein complex involved in fertilization

Mammalian fertilization depends upon successful binding and fusion between the membranes of the spermatozoon and the oocyte. These processes are thought to be mediated by a series of protein-protein interactions in which sperm antigens known as fertilins are thought to play a key role. Using a recently developed fluorescence technique, the interactions of the oligopeptide sequence corresponding to the fusogenic domain of mouse fertilin-alpha (MFalphaP) and phospholipid vesicles have been investigated. Following stopped-flow mixing, MFalphaP bound rapidly to phospholipid membranes in a co-operative manner with a Hill coefficient of 2.4 and binding rate constants in excess of 1000 s-1. The co-operative nature of the binding process is suggested to represent evidence of a structural mechanism to prevent egg fertilization by immature spermatozoa. The subsequent membrane insertion was found to take place over a longer time period (with rate constants of up to 6.3 s-1), and was linear with respect to peptide concentration. Comparison of these processes with similar time-resolved circular dichroism measurements revealed that changes in peptide secondary structure were very rapid. Fourier transform infrared spectroscopy measurements confirmed changes in the secondary structure of MFalphaP during interaction with PC phospholipid membranes, indicating that the peptide is mainly present in a beta-structure with a small proportion of alpha-helix. These results are consistent with the hypothesis that fertilin-alpha is the fusogenic species with an important role in fertilization.     

Voltage-dependent orientation of membrane proteins

In order to study the influence of electrostatic forces on the disposition of proteins in membranes, we have examined the interaction of a receptor protein and of a membrane-active peptide with black lipid membranes. In the first study we show that the hepatic asialoglycoprotein receptor can insert spontaneously into lipid bilayers from the aqueous medium. Under the influence of a trans-positive membrane potential, the receptor, a negatively charged protein, appears to change its disposition with respect to the membrane. In the second study we consider melittin, an amphipathic peptide containing a generally hydrophobic stretch of 19 amino acids followed by a cluster of four positively charged residues at the carboxy terminus. The hydrophobic region contains two positively charged residues. In response to trans-negative electrical potential, melittin appears to assume a transbilayer position. These findings indicate that electrostatic forces can influence the disposition, and perhaps the orientation, of membrane proteins. Given the inside-negative potential of most or all cells, we would expect transmembrane proteins to have clusters of positively charged residues adjacent to the cytoplasmic ends of their hydrophobic transmembrane segments, and clusters of negatively charged residues just to the extracytoplasmic side. This expectation has been borne out by examination of the few transmembrane proteins for which there is sufficient information on both sequence and orientation. Surface and dipole potentials may similarly affect the orientation of membrane proteins.     

Membrane interactions of the putative fusion peptide (MF alpha P) from fertilin-alpha, the mouse sperm protein complex involved in fertilization.

Mammalian fertilization depends upon successful binding and fusion between the membranes of the spermatozoon and the oocyte. These processes are thought to be mediated by a series of protein-protein interactions in which sperm antigens known as fertilins are thought to play a key role. Using a recently developed fluorescence technique, the interactions of the oligopeptide sequence corresponding to the fusogenic domain of mouse fertilin-alpha (MF alpha P) and phospholipid vesicles have been investigated. Following stopped-flow mixing, MF alpha P bound rapidly to phospholipid membranes in a co-operative manner with a Hill coefficient of 2.4 and binding rate constants in excess of 1000 s-1. The co-operative nature of the binding process is suggested to represent evidence of a structural mechanism to prevent egg fertilization by immature spermatozoa. The subsequent membrane insertion was found to take place over a longer time period (with rate constants of up to 6.3 s-1), and was linear with respect to peptide concentration. Comparison of these processes with similar time-resolved circular dichroism measurements revealed that changes in peptide secondary structure were very rapid. Fourier transform infrared spectroscopy measurements confirmed changes in the secondary structure of MF alpha P during interaction with PC phospholipid membranes, indicating that the peptide is mainly present in a beta-structure with a small proportion of alpha-helix. These results are consistent with the hypothesis that fertilin-alpha is the fusogenic species with an important role in fertilization.     

Modulation of membrane surface curvature by peptide-lipid interactions

Recent reports on the interaction of cardiotoxin and melittin with phospholipid model membranes are reviewed and analyzed. These types of peptide toxins are able to modulate lipid surface curvature and polymorphism in a highly lipid-specific way. It is demonstrated that the remarkable variety of effects of melittin on the organization of different membrane phospholipids can be understood in a relatively simple model, based on the shape-structure concept of lipid polymorphism and taking into account the position of the peptide molecule with respect to the lipids. Based on the strong preference of the peptides for negatively charged lipids and the structural consequences thereof, and on preliminary studies of signal peptide-lipid interaction, a role of inverted or concave lipid structures in the process of protein translocation across membranes is suggested.     

Characteristics of the interaction of melittin with sarcoplasmic reticulum membranes.

Addition of an amphipathic bee venom peptide, melittin, to sarcoplasmic reticulum (SR) vesicles isolated from rabbit skeletal muscles resulted in a fast (<1 min) blue shift in the fluorescence maximum of the melittin--SR membrane complex. Over the following 45 min the position of the fluorescence maximum did not change, but the fluorescence intensity of the melittin--SR membrane complex decreased by approximately 35% with rate constant 0.14 min-1. Melittin rapidly quenched the isotropic signal in the EPR spectrum of spin-labeled stearic acid added to SR membranes. Further changes in the spectral parameters of the spin probe bound to SR membranes in the presence of melittin indicated an increase of the viscosity of the probe microenvironment (empiric parameter T/eta was decreased by approximately 35% with rate constant 0.11 min-1). The surface potential of SR membranes measured using a pH-sensitive dye, neutral red, decreased after melittin addition from -60 to -30 mV. It was demonstrated with the use of a cross-linking agent, cupric o-phenanthroline, that melittin induced slow aggregation of Ca-ATPase protein in SR membranes; the content of enzyme in the monomeric form decreased with rate constant 0.14 min-1. It is concluded that melittin binds rapidly to SR membranes, inducing slow changes in Ca-ATPase conformation and oligomeric state as well as structural transitions in the lipid bilayer of SR membranes.     

Melittin: a Membrane-active Peptide with Diverse Functions

Melittin is the principal toxic component in the venom of the European honey bee Apis mellifera and is a cationic, hemolytic peptide. It is a small linear peptide composed of 26 amino acid residues in which the amino-terminal region is predominantly hydrophobic whereas the carboxy-terminal region is hydrophilic due to the presence of a stretch of positively charged amino acids. This amphiphilic property of melittin has resulted in melittin being used as a suitable model peptide for monitoring lipid–protein interactions in membranes. In this review, the solution and membrane properties of melittin are highlighted, with an emphasis on melittin–membrane interaction using biophysical approaches. The recent applications of melittin in various cellular processes are discussed.     

Free energy analysis of membrane pore formation process in the presence of multiple melittin peptides

Understanding the molecular mechanism underlying pore formation in lipid membranes by antimicrobial peptides is of great importance in biological sciences as well as in drug design applications. Melittin has been widely studied as a pore forming peptide, though the molecular mechanism for pore formation is still illusive. We examined the free energy barrier for the creation of a pore in lipid membranes with and without multiple melittin peptides. It was found that six melittin peptides significantly stabilized a pore, though a small barrier (a few k_BT) for the formation still existed. With five melittin peptides or fewer, the pore formation barrier was much higher, though the established pore was in a local energy minimum. Although seven melittins effectively reduced the free energy barrier, a single melittin peptide left the pore after a long time MD simulation probably because of the overcrowded environment around the bilayer pore. Thus, it is highly selective for the number of melittin peptides to stabilize the membrane pore, as was also suggested by the line tension evaluations. The free energy cost required to insert a single melittin into the membrane is too high to explain the one-by-one insertion mechanism for pore formation, which also supports the collective melittin mechanism for pore formation.     

Models of delta-hemolysin membrane channels and crystal structures

Molecular modeling and energy calculations have been used to study how delta-hemolysin and melittin helices may aggregate on membrane surfaces and insert through membranes to form channels. In these models adjacent antiparallel amphipathic helices form planar "raft" structures, in which one surface is hydrophobic and the other hydrophilic. Models of delta-hemolysin crystal structure were developed using these "rafts." These models are based on the unit cell constants and the crystal symmetry obtained from the preliminary crystal data. Energy calculations favor channel models of delta-hemolysin with six or eight monomers per channel.     

Insect protein synthesis in frog cells: the translation of honey bee promelittin messenger RNA in Xenopus oocytes

Venom glands of young queen bees (Apis mellifera) synthesize the toxic peptide melittin as their main product. Melittin is formed by proteolytic cleavage of a precursor, promelittin. Unfractionated RNA prepared from venom glands was injected into Xenopus oocytes and was shown to direct the synthesis of a promelittin-like substance. About half of the peptide chain made in oocytes has been sequenced; the 17 amino acid residues identified correspond exactly with sequences found in promelittin from venom gland cells. These results yield final proof that injected messenger RNAs can be read with great fidelity. The translation of a messenger from an insect gland shows that at least some of the translational systems within the oocyte are neither cell-type nor phylum specific. It seems likely that the oocyte can be used to assay any kind of eukaryotic mRNA.The conversion of promelittin to melittin could not be detected in oocytes. Moreover, the promelittin synthesized in oocytes differs at the carboxyl end from the product made in gland cells, for the latter terminates with glutamine amide while the oocyte material probably ends with an amino acid with a free α-carboxyl group. Some of the post-translational modifications characteristic of gland cells thus do not seem to take place in oocytes.     

Exploring peptide membrane interaction using surface plasmon resonance: differentiation between pore formation versus membrane disruption by lytic peptides

Lytic peptides comprise a large group of membrane-active peptides used in the defensive and offensive systems of all organisms. Differentiating between their modes of interaction with membranes is crucial for understanding how these peptides select their target cells. Here we utilized SPR to study the interaction between lytic peptides and lipid bilayers (L1 sensor chip). Using studies also on hybrid monolayers (HPA sensor chip) revealed that SPR is a powerful tool for obtaining a real-time monitoring of the steps involved in the mode of action of membrane-active peptides, some of which previously could not be detected directly by other techniques and reported here for the first time. We investigated the mode of action of peptides that represent two major families: (i) the bee venom, melittin, as a model of a non-cell-selective peptide that forms transmembrane pores and (ii) magainin and a diastereomer of melittin (four amino acids were replaced by their D enantiomers), as models of bacteria-selective non-pore-forming peptides. Fitting the SPR data to different interaction models allows differentiating between two major steps: membrane binding and membrane insertion. Melittin binds to PC/cholesterol approximately 450-fold better than its diastereomer and magainin, mainly because it is inserted into the inner leaflet (2/3 of the binding energy), whereas the other two are not. In contrast, there is only a slight difference in the binding of all the peptides to negatively charged PE/PG mono- and bilayer membranes (in the first and second steps), indicating that the inner leaflet contributes only slightly to their binding to PE/PG bilayers. Furthermore, the 100-fold stronger binding of the cell-selective peptides to PE/PG as compared with PC/cholesterol resulted only from electrostatic attraction to the negatively charged headgroups of the outer leaflet. These results clearly differentiate between the two general mechanisms: pore formation by melittin only in zwitterionic membranes and a detergent-like effect (carpet mechanism) for all the peptides in negatively charged membranes, in agreement with their biological function.     

Translation of honeybee promelittin messenger RNA. Formation of a larger product in a mammalian cell-free system.

Venom glands of honeybees synthesize the peptide melittin via the precursor promelittin. Total RNA preparations from venom glands served as template in a cell-free system prepared from mammalian cells. The heterologous system translated the insect mRNA with approximately the same efficiency as hemoglobin mRNA. A polypeptide was synthesized which, as shown by acrylamide gel electrophoresis in the presence of detergent, has a higher molecular weight than promelittin. Analysis of peptic fragments as well as Edman degradation have demonstrated that sequences characteristic of venom gland promelittin are present in this product formed in vitro. Furthermore, a bacterial protease which specifically splits after acidic residues liberates from the cell-free product a fragment which closely resembles melittin. Evidence is presented that most of the extra amino acids are located at the amino terminus of the product formed in vitro. The larger polypeptide detected in vitro may represent a precursor of promelittin.     

Interactions of mouse Paneth cell alpha-defensins and alpha-defensin precursors with membranes. Prosegment inhibition of peptide association with biomimetic membranes

The bactericidal activity of mouse alpha-defensins (cryptdins) requires proteolytic activation of inactive precursors by matrix metalloproteinase-7 (matrilysin, EC, MMP-7(a)). To investigate mechanisms of cryptdin-4 (Crp4) peptide interactions with membrane bilayers and to determine whether MMP-7-mediated proteolysis activates the membrane disruptive activity of Crp4, associations of Crp4 and melittin with biomimetic lipid/polydiacetylene chromatic vesicles were characterized. The peptides differ in their sensitivity to vesicle lipid composition and their depth of bilayer penetration. Crp4 undergoes strong interfacial binding onto lipid bilayers with disruption of the bilayer head group region, unlike melittin, which inserts more deeply into the hydrophobic core of the bilayer. Colorimetric and tryptophan fluorescence studies showed that Crp4 insertion is favored by negatively charged phospholipids and that zwitterionic and Escherichia coli phospholipids promote stronger interfacial binding; melittin-membrane interactions were independent of either variable. In contrast to the membrane disruptive activity of Crp4, pro-Crp4 did not perturb vesicular membranes, consistent with the lack of bactericidal activity of the precursor, and incubation of Crp4 with prosegment in trans blocked Crp4 and G1W-Crp4 membrane interactions at concentrations that inhibit Crp4 bactericidal activity. CD measurements showed that Crp4 has an expected beta-sheet structure that is not evident in the pro-Crp4 CD trace or when Crp4 is incubated with prosegment, indicating that the beta-sheet signal is attenuated by proregion interactions or possibly disrupted by the prosegment. Collectively, the results suggest that the prosegment inhibits Crp4 bactericidal activity by blocking peptide-mediated perturbation of target cell membranes, a constraint that is relieved when MMP-7 cleaves the prosegment.     

Modulation of melittin-induced lysis by surface charge density of membranes.

Phosphorus NMR spectroscopy was used to characterize the importance of electrostatic interactions in the lytic activity of melittin, a cationic peptide. The micellization induced by melittin has been characterized for several lipid mixtures composed of saturated phosphatidylcholine (PC) and a limited amount of charged lipid. For these systems, the thermal polymorphism is similar to the one observed for pure PC: small comicelles are stable in the gel phase and extended bilayers are formed in the liquid crystalline phase. Vesicle surface charge density influences strongly the micellization. Our results show that the presence of negatively charged lipids (phospholipid or unprotonated fatty acid) reduces the proportion of lysed vesicles. Conversely, the presence of positively charged lipids leads to a promotion of the lytic activity of the peptide. The modulation of the lytic effect is proposed to originate from the electrostatic interactions between the peptide and the bilayer surface. Attractive interactions anchor the peptide at the surface and, as a consequence, inhibit its lytic activity. Conversely, repulsive interactions favor the redistribution of melittin into the bilayer, causing enhanced lysis. A quantitative analysis of the interaction between melittin and negatively charged bilayers suggests that electroneutrality is reached at the surface, before micellization. The surface charge density of the lipid layer appears to be a determining factor for the lipid/peptide stoichiometry of the comicelles; a decrease in the lipid/peptide stoichiometry in the presence of negatively charged lipids appears to be a general consequence of the higher affinity of melittin for these membranes.     

Molecular dynamics simulation of melittin in a dimyristoylphosphatidylcholine bilayer membrane.

Molecular dynamics trajectories of melittin in an explicit dimyristoyl phosphatidylcholine (DMPC) bilayer are generated to study the details of lipid-protein interactions at the microscopic level. Melittin, a small amphipathic peptide found in bee venom, is known to have a pronounced effect on the lysis of membranes. The peptide is initially set parallel to the membrane-solution interfacial region in an alpha-helical conformation with unprotonated N-terminus. Solid-state nuclear magnetic resonance (NMR) and polarized attenuated total internal reflectance Fourier transform infrared (PATIR-FTIR) properties of melittin are calculated from the trajectory to characterize the orientation of the peptide relative to the bilayer. The residue Lys7 located in the hydrophobic moiety of the helix and residues Lys23, Arg24, Gln25, and Gln26 at the C-terminus hydrophilic form hydrogen bonds with water molecules and with the ester carbonyl groups of the lipids, suggesting their important contribution to the stability of the helix in the bilayer. Lipid acyl chains are closely packed around melittin, contributing to the stable association with the membrane. Calculated density profiles and order parameters of the lipid acyl chains averaged over the molecular dynamics trajectory indicate that melittin has effects on both layers of the membrane. The presence of melittin in the upper layer causes a local thinning of the bilayer that favors the penetration of water through the lower layer. The energetic factors involved in the association of melittin at the membrane surface are characterized using an implicit mean-field model in which the membrane and the surrounding solvent are represented as structureless continuum dielectric material. The results obtained by solving the Poisson-Bolztmann equation numerically are in qualitative agreement with the detailed dynamics. The influence of the protonation state of the N-terminus of melittin is examined. After 600 ps, the N-terminus of melittin is protonated and the trajectory is continued for 400 ps, which leads to an important penetration of water molecules into the bilayer. These observations provide insights into how melittin interacts with membranes and the mechanism by which it enhances their lysis.     

Orientation and dynamics of melittin in membranes of varying composition utilizing NBD fluorescence

Melittin is a cationic hemolytic peptide isolated from the European honey bee, Apis mellifera. The organization of membrane-bound melittin has earlier been shown to be dependent on the physical state and composition of membranes. In this study, we covalently labeled the N-terminal (Gly-1) and Lys-7 of melittin with an environment-sensitive fluorescent probe, the NBD group, to monitor the influence of negatively charged lipids and cholesterol on the organization and dynamics of membrane-bound melittin. Our results show that the NBD group of melittin labeled at its N-terminal end does not exhibit red edge excitation shift in DOPC and DOPC/DOPG membranes, whereas the NBD group of melittin labeled at Lys-7 exhibits REES of approximately 8 nm. This could be attributed to difference in membrane microenvironment experienced by the NBD groups in these analogs. Interestingly, the membrane environment of the NBD groups is sensitive to the presence of cholesterol, which is supported by time-resolved fluorescence measurements. Importantly, the orientation of melittin is found to be parallel to the membrane surface as determined by membrane penetration depth analysis using the parallax method in all cases. Our results constitute the first report to our knowledge describing the orientation of melittin in cholesterol-containing membranes. These results assume significance in the overall context of the role of membrane lipids in the orientation and function of membrane proteins and peptides.     

Conformation of a bactericidal domain of puroindoline a: structure and mechanism of action of a 13-residue antimicrobial peptide

Puroindoline a, a wheat endosperm-specific protein containing a tryptophan-rich domain, was reported to have antimicrobial activities. We found that a 13-residue fragment of puroindoline a (FPVTWRWWKWWKG-NH(2)) (puroA) exhibits activity against both gram-positive and gram-negative bacteria. This suggests that puroA may be a bactericidal domain of puroindoline a. PuroA interacted strongly with negatively charged phospholipid vesicles and induced efficient dye release from these vesicles, suggesting that the microbicidal effect of puroA may be due to interactions with bacterial membranes. A variety of biophysical and biochemical methods, including fluorescence spectroscopy and microcalorimetry, were used to examine the mode of action of puroA. These studies showed that puroA is located at the membrane interface, probably due to its high content of Trp residues that have a high propensity to partition into the membrane interface. The penetration of these Trp residues in negatively charged phospholipid vesicles resembling bacterial membranes was more extensive than the penetration in neutral vesicles mimicking eukaryotic membranes. Peptide binding had a significant influence on the phase behavior of the former vesicles. The three-dimensional structure of micelle-bound puroA determined by two-dimensional nuclear magnetic resonance spectroscopy indicated that all the positively charged residues are oriented close to the face of Trp indole rings, forming energetically favorable cation-pi interactions. This characteristic, along with its well-defined amphipathic structure upon binding to membrane mimetic systems, allows puroA to insert more deeply into bacterial membranes and disrupt the regular membrane bilayer structure.     

Electrostatic and Hydrophobic Interactions Differentially Tune Membrane Binding Kinetics of the C2 Domain of Protein Kinase Cα

The cellular activation of conventional protein kinase C (PKC) isozymes is initiated by the binding of their C2 domains to membranes in response to elevations in intracellular Ca²⁺. Following this C2 domain-mediated membrane recruitment, the C1 domain binds its membrane-embedded ligand diacylglycerol, resulting in activation of PKC. Here we explore the molecular mechanisms by which the C2 domain controls the initial step in the activation of PKC. Using stopped-flow fluorescence spectroscopy to measure association and dissociation rate constants, we show that hydrophobic interactions are the major driving force in the binding of the C2 domain to anionic membranes, whereas electrostatic interactions dominate in membrane retention. Specifically, mutation of select hydrophobic or select basic residues in the Ca²⁺-binding loops reduces membrane affinity by distinct mechanisms; mutation of hydrophobic residues primarily alters association rate constants, whereas mutation of charged residues affects dissociation rate constants. Live cell imaging reveals that introduction of these mutations into full-length PKCα not only reduces the Ca²⁺-dependent translocation to plasma membrane but, by impairing the plasma membrane-sensing role of the C2 domain, causes phorbol ester-triggered redistribution of PKCα to other membranes, such as the Golgi. These data underscore the key role of the C2 domain in driving conventional PKC isozymes to the plasma membrane and reveal that not only the amplitude but also the subcellular location of conventional PKC signaling can be tuned by altering the affinity of this module for membranes.