On the mechanisms of oligopeptide reactions in solution and clay dispersion.

Mechanisms of the reactions of representative dipeptides (Gly2, Gly-Ala), oligopeptides (Gly3, Gly4) and the polypeptide (poly-Gly)n) in solution and clay suspensions at 85 degrees C were investigated. The reaction products and their yields were analysed and determined by means of HPLC. Interestingly, hydrolysis, where water molecules act as the reactant, was not the main reaction, even for oligopeptides. Formation of cyclic dipeptides prevailed in the reactions of dimers as well as oligopeptides. The breakdown of oligopeptide molecules proceeded via an intramolecular cyclization reaction. For example, the reaction of Gly3 led to the formation of equal amounts of cyclic dipeptide, c(Gly)2 and Gly. The presence of clay (montmorillonite) significantly increased yields in the reactions of dipeptides but it did not have much effect on the reactions of oligopeptides. However, an opposite effect of clay, protection of poly(Gly)n against decomposition, was proven.     

Solution‐phase submonomer diversification of aza‐dipeptide building blocks and their application in aza‐peptide and aza‐DKP synthesis

Aza‐peptides have been used as tools for studying SARs in programs aimed at drug discovery and chemical biology. Protected aza‐dipeptides were synthesized by a solution‐phase submonomer approach featuring alkylation of N‐terminal benzophenone semicarbazone aza‐Gly‐Xaa dipeptides using different alkyl halides in the presence of potassium tert‐butoxide as base. Benzophenone protected aza‐dipeptide tert‐butyl ester 31c was selectively deprotected at the C‐terminal ester or N‐terminal hydrazone to afford, respectively, aza‐dipeptide acid and amine building blocks 36c and 40c, which were introduced into longer aza‐peptides. Alternatively, removal of the benzophenone semicarbazone protection from aza‐dipeptide methyl esters 29a–c led to intramolecular cyclization to produce aza‐DKPs 39a–c. In light of the importance of aza‐peptides and DKPs as therapeutic agents and probes of biological processes, this diversity‐oriented solution‐phase approach may provide useful tools for studying peptide science. Copyright © 2010 European Peptide Society and John Wiley & Sons, Ltd.     

Distinct solid and solution state self‐assembly pathways of RADA16‐I designer peptide

Solid state NMR measurements on selectively ¹³C‐labeled RADA16‐I peptide (COCH₃–RADARADARADARADA–NH₂) were used to obtain new molecular level information on the conversion of α‐helices to β‐sheets through self‐assembly in the solid state with increasing temperature. Isotopic labeling at the A4 C_β site enabled rapid detection of ¹³C NMR signals. Heating to 344–363 K with simultaneous NMR detection allowed production of samples with systematic variation of α‐helix and β‐strand content. These samples were then probed at room temperature for intermolecular ¹³C–¹³C nuclear dipolar couplings with the PITHIRDS‐CT NMR experiment. The structural transition was also characterized by Fourier transform infrared spectroscopy and wide angle X‐ray diffraction. Independence of PITHIRDS‐CT decay shapes on overall α‐helical and β‐strand content infers that β‐strands are not observed without association with β‐sheets, indicating that β‐sheets are formed at elevated temperatures on a timescale that is fast relative to the NMR experiment. PITHIRDS‐CT NMR data were compared with results of similar measurements on RADA16‐I nanofibers produced by self‐assembly in aqueous salt solution. We report that β‐sheets formed through self‐assembly in the solid state have a structure that differs from those formed through self‐assembly in the solution state. Specifically, solid state RADA16‐I self‐assembly produces in‐register parallel β‐sheets, whereas nanofibers are composed of stacked parallel β‐sheets with registry shifts between adjacent β‐strands in each β‐sheet. These results provide evidence for environment‐dependent self‐assembly mechanisms for RADA16‐I β‐sheets as well as new constraints on solid state self‐assembled structures, which must be avoided to maximize solution solubility and nanofiber yields. Copyright © 2013 European Peptide Society and John Wiley & Sons, Ltd.     

An efficient method for the synthesis of phenacyl ester‐protected dipeptides using neutral alumina‐supported sodium carbonate ‘Na2CO3/n‐Al2O3’

In the synthesis of dipeptides (Boc‐AA¹‐AA²‐OPac: AA¹ and AA² represent amino acids) protected by phenacyl (Pac) ester, amines and solid bases as the base for the conversion of the trifluoroacetic acid (TFA) salt of the amino component (TFA·H‐AA²‐OPac) into the corresponding free amino component (H‐AA²‐OPac) were examined. The synthesis of a dipeptide (Boc‐Ala‐Gly‐OPac) using amines for the conversion afforded an unsatisfactory yield with by‐products. On the other hand, the use of neutral alumina‐supported Na₂CO₃ (Na₂CO₃/n‐Al₂O₃) as a solid base for the conversion provided the dipeptide in a quantitative yield without by‐products. The application of Na₂CO₃/n‐Al₂O₃ to the synthesis of some dipeptides protected by Pac ester gave the desired peptides in excellent yields. Copyright © 2013 European Peptide Society and John Wiley & Sons, Ltd.     

Helicity of perfluoroalkyl chains controlled by the self‐assembly of the Ala‐Ala dipeptides

Four Ala‐Ala dipeptides with a perfluoroalkyl chain at the N‐terminal were synthesized. They were able to self‐assemble into helical nanofibers and/or twisted nanobelts in a mixture of DMSO/H₂O. The handedness of nanofibers and nanobelts was controlled by the chirality of the alanine at the N‐terminal. The stacking handedness of the phenylene groups and the helicity of the perfluoroalkyl chain were studied using circular dichroism spectroscopy and vibrational circular dichroism, respectively. The chirality of the alanine at N‐terminal controlled the stacking handedness of the neighboring phenylene groups. Moreover, due to the low potential barrier between M‐ and P‐helices of the perfluorocarbon chain, the handedness of the organic self‐assemblies eventually controlled the helicity of the perfluorocarbon chain. X‐ray diffraction indicated that a lamellar structure was formed by the dimers of the dipeptides.     

Enantiomeric resolution and modeling of DL‐alanine‐DL‐tryptophan dipeptide on amylose stationary phase

The enantiomeric resolution of DL‐alanine‐DL‐tryptophan dipeptide is described on amylose stationary phase. The eluent used was CH₃OH─CH₃COONH₄ (10mM)─CH₃CN (50: 40, 10) at 0.8‐mL/min flow, 230‐nm detection, 25‐minute run time, and 25°C ± 1°C temperature. The chiral phase was amylose [AmyCoat RP (15 cm × 0.46 cm × 5 micron)]. The magnitudes of the retention factors (k) were 2.71, 3.52, 5.11, and 7.75. The magnitudes of separation factor (α) were 1.19, 1.57, and 1.51 while the resolution factors (Rs) were 3.25, 14.84, and 15.76. The limits of detection and quantitation were of 2.5 to 5.4 and 12.8 to 27.5 μg/mL. The enantiomeric resolution is controlled by hydrogen, hydrophobic, π‐π, steric, etc interactions. The elution order of the enantiomer was supported by the modeling data. The described method is fast, reproducible, precise, and selective, which can be used successfully for evaluating the enantiomers of the reported dipeptide.     

Cationic oligopeptides with the repeating sequence L‐lysyl‐L‐alanyl‐L‐alanine: conformational and thermal stability study using optical spectroscopic methods

The infrared (IR), vibrational circular dichroism (VCD), and electronic circular dichroism (ECD) spectra of short cationic sequential peptides (L ‐Lys‐L ‐Ala‐L ‐Ala)_n (n = 1, 2, and 3) were measured over a range of temperatures (20–90 °C) in aqueous solution at near‐neutral pH values in order to investigate their solution conformations and thermally induced conformational changes. VCD spectra of all three oligopeptides measured in the amide I′ region indicate the presence of extended helical polyproline II (PPII)‐like conformation at room temperature. UV‐ECD spectra confirmed this conclusion. Thus, the oligopeptides adopt a PPII‐like conformation, independent of the length of the peptide chain. However, the optimized dihedral angles ? and ψ are within the range ?82 to ?107° and 143–154°, respectively, and differ from the canonical PPII values. At elevated temperatures, the observed intensity and bandshape variations in the VCD and ECD spectra show that the PPII‐like conformation of the Lys‐Ala‐Ala sequence is still preferred, being in equilibrium with an unordered conformer at near‐neutral pH values within the range of temperatures from 20 to 90 °C. This finding was obtained from analysis of the temperature‐dependent spectra using the singular value decomposition method. The study presents KAA‐containing oligopeptides as conformationally stable models of biologically important cationic peptides and proteins. Copyright © 2009 European Peptide Society and John Wiley & Sons, Ltd.     

Triblock‐Terpolymer‐Directed Self‐Assembly of Mesoporous TiO2: High‐Performance Photoanodes for Solid‐State Dye‐Sensitized Solar Cells

A new self‐assembly platform for the fast and straightforward synthesis of bicontinuous, mesoporous TiO₂ films is presented, based on the triblock terpolymer poly(isoprene ‐ b ‐ styrene ‐ b ‐ ethylene oxide). This new materials route allows the co‐assembly of the metal oxide as a fully interconnected minority phase, which results in a highly porous photoanode with strong advantages over the state‐of‐the‐art nanoparticle‐based photoanodes employed in solid‐state dye‐sensitized solar cells. Devices fabricated through this triblock terpolymer route exhibit a high availability of sub‐bandgap states distributed in a narrow and low enough energy band, which maximizes photoinduced charge generation from a state‐of‐the‐art organic dye, C220. As a consequence, the co‐assembled mesoporous metal oxide system outperformed the conventional nanoparticle‐based electrodes fabricated and tested under the same conditions, exhibiting solar power‐conversion efficiencies of over 5%.     

Syntheses and activities of backbone‐side chain cyclic octapeptide ligands with N‐functionalized phosphotyrosine for the N‐terminal SH2‐domain of the protein tyrosine phosphatase SHP‐1

The protein tyrosine phosphatase SHP‐1 plays an important role in many physiological and pathophysiological processes. This phosphatase is activated through binding of ligands to its SH2‐domains, mainly to the N‐terminal one. Based on a theoretical docking model, backbone‐to‐side chain cyclized octapeptides were designed as ligands. Assembly of such modelled structures required the synthesis of N‐functionalized tyrosine derivatives and their incorporation into the sequence. Because of difficulties encountered in the condensation of N‐protected amino acids to the N‐alkylated tyrosine‐peptide we synthesized and used preformed dipeptide building units. As all attempts to obtain phosphorylated dipeptide units failed, the syntheses had to be performed with a free phenolic function. Use of different N‐alkyl or cycloalkyl residues in the N‐functionalized side chains allowed to investigate the effect of ring size, flexibility and hydrophobicity of formed lactam bridges on stimulatory activity. All tested linear and cyclic octapeptides stimulate the phosphatase activity of SHP‐1. Stimulatory activities of cyclic ligands increase with the chain length of the lactam bridges resulting in increased flexibility and better entropic preformation of the binding conformation. The strong activity of some cyclic octapeptides supports the modelled structure. Copyright © 2010 European Peptide Society and John Wiley & Sons, Ltd.     

α‐N‐Protected dipeptide acids: a simple and efficient synthesis via the easily accessible mixed anhydride method using free amino acids in DMSO and tetrabutylammonium hydroxide

The importance of dipeptides both in medicinal and pharmacological fields is well documented and many efforts have been made to find simple and efficient methods for their synthesis. For this reason, we have investigated the synthesis of α‐N‐protected dipeptide acids by reacting the easily accessible mixed anhydride of α‐N‐protected amino acids with free amino acids under different reaction conditions. The combination of TBA‐OH and DMSO has been found to be the best to overcome the low solubility of amino acids in organic solvents. Under these experimental conditions, the homogeneous phase condensation reaction occurs rapidly and without detectable epimerization. The present method is also applicable to side‐chain unprotected Tyr, Trp, Glu, and Asp but not Lys. This latter residue is able to engage two molecules of mixed anhydride giving the corresponding isotripeptide. Moreover, the applicability of this protocol for the synthesis of tri‐ and tetrapeptides has been tested. This approach reduces the need for protecting groups, is cost effective, scalable, and yields dipeptide acids that can be used as building blocks in the synthesis of larger peptides. Copyright © 2013 European Peptide Society and John Wiley & Sons, Ltd.     

Crystal structure of a tripeptide containing aminocyclododecane carboxylic acid: a supramolecular twisted parallel β‐sheet in crystals

The crystal structure of a tripeptide Boc‐Leu‐Val‐Ac₁₂c‐OMe ( 1 ) is determined, which incorporates a bulky 1‐aminocyclododecane‐1‐carboxylic acid (Ac₁₂c) side chain. The peptide adopts a semi‐extended backbone conformation for Leu and Val residues, while the backbone torsion angles of the C^α,α‐dialkylated residue Ac₁₂c are in the helical region of the Ramachandran map. The molecular packing of 1 revealed a unique supramolecular twisted parallel β‐sheet coiling into a helical architecture in crystals, with the bulky hydrophobic Ac₁₂c side chains projecting outward the helical column. This arrangement resembles the packing of peptide helices in crystal structures. Although short oligopeptides often assemble as parallel or anti‐parallel β‐sheet in crystals, twisted or helical β‐sheet formation has been observed in a few examples of dipeptide crystal structures. Peptide 1 presents the first example of a tripeptide showing twisted β‐sheet assembly in crystals. Copyright © 2016 European Peptide Society and John Wiley & Sons, Ltd.     

Incorporation of N‐amidino‐pyroglutamic acid into peptides using intramolecular cyclization of α‐guanidinoglutaric acid

N‐terminal modification of peptides by unnatural amino acids significantly affects their enzymatic stability, conformational properties and biological activity. Application of N‐amidino‐amino acids, positively charged under physiological conditions, can change peptide conformation and its affinity to the corresponding receptor. In this article, we describe synthesis of short peptides, containing a new building block—N‐amidino‐pyroglutamic acid. Although direct guanidinylation of pyroglutamic acid and oxidation of N‐amidino‐proline using RuO₄ did not produce positive results, N‐amidino‐Glp‐Phe‐OH was synthesized on Wang polymer by cyclization of α‐guanidinoglutaric acid residue. In the course of synthesis, it was found that literature procedure of selective Boc deprotection using TMSOTf/TEA reagent is accompanied by concomitant side reaction of triethylamine alkylation by polymer linker fragment. It should be mentioned that independently from cyclization time and coupling agent (DIC or HCTU), the lactam formation was incomplete. Separation of the cyclic product from the linear precursor was achieved by HPLC in ammonium formate buffer at pH 6. HPLC analysis showed N‐amidino‐Glp‐Phe‐OH stability at acidic and physiological pH and fast ring opening in water solution at pH 9. The suggested method of N‐amidino‐Glp residue formation can be applied in the case of short peptide chains, whereas synthesis of longer ones will require fragment condensation approach. Copyright © 2009 European Peptide Society and John Wiley & Sons, Ltd.     

Solvent‐Free Synthesis of Thin,Flexible, Nonflammable Garnet‐Based Composite Solid Electrolyte for All‐Solid‐State Lithium Batteries

Thin solid‐state electrolytes with nonflammability, high ionic conductivity, low interfacial resistance, and good processability are urgently required for next‐generation safe, high energy density lithium metal batteries. Here, a 3D Li_6.75La₃Zr_1.75Ta_0.25O₁₂ (LLZTO) self‐supporting framework interconnected by polytetrafluoroethylene (PTFE) binder is prepared through a simple grinding method without any solvent. Subsequently, a garnet‐based composite electrolyte is achieved through filling the flexible 3D LLZTO framework with a succinonitrile solid electrolyte. Due to the high content of garnet ceramic (80.4 wt%) and high heat‐resistance of the PTFE binder, such a composite electrolyte film with nonflammability and high processability exhibits a wide electrochemical window of 4.8 V versus Li/Li⁺ and high ionic transference number of 0.53. The continuous Li⁺ transfer channels between interconnected LLZTO particles and succinonitrile, and the soft electrolyte/electrode interface jointly contribute to a high ambient‐temperature ionic conductivity of 1.2 × 10^?4 S cm^?1 and excellent long‐term stability of the Li symmetric battery (stable at a current density of 0.1 mA cm^?2 for over 500 h). Furthermore, as‐prepared LiFePO₄|Li and LiNi_0.5Mn_0.3Co_0.2O₂|Li batteries based on the thin composite electrolyte exhibit high discharge specific capacities of 153 and 158 mAh g^?1 respectively, and desirable cyclic stabilities at room temperature.     

Homochiral bifunctional L‐prolinamide‐ and L‐bis‐prolinamide‐catalyzed asymmetric aldol reactions performed in wet solvent‐free conditions

In this study, the novel bifunctional homochiral thiourea‐L‐prolinamides 1–4 , tertiary amino‐L‐prolinamide 5 , and bis‐L‐prolinamides 6 and 7 were prepared from enantiomerically pure (11R,12R)‐11,12‐diamino‐9,10‐dihydro‐9,10‐ethanoanthracene 8 and (11S,12S)‐11,12‐diamino‐9,10‐dihydro‐9,10‐ethanoanthracene ent‐8 . Highly enantioselective and diastereoselective aldolic intermolecular reactions (up to 95% enantiomeric excess, 93:7 anti/syn) between aliphatic ketones (20 equiv) and a range of aromatic aldehydes (1 equiv) were successfully carried out in the presence of water (10 equiv) and monochloroacetic acid (10 mol%), solvent‐free conditions, at room temperature over 24 h using organocatalysts 1–7 (5 mol%). Stereoselective induction using density functional theory–based methods was consistent with the experimental data.     

Influence of substituents on conformational preferences of helix foldamers of γ‐dipeptides

Conformational preferences of 9‐ and 14‐helix foldamers have been studied for γ‐dipeptides of 2‐aminocyclohexylacetic acid (γAc₆a) residues such as Ac‐(γAc₆a)₂‐NHMe ( 1 ), Ac‐(C^α‐Et‐γAc₆a)₂‐NHMe ( 2 ), Ac‐(γAc₆a)₂‐NHBn ( 3 ), and Ac‐(C^α‐Et‐γAc₆a)₂‐NHBn ( 4 ) at the M06‐2X/cc‐pVTZ//M06‐2X/6‐31 + G(d) level of theory to explore the influence of substituents on their conformational preferences. In the gas phase, the 9‐helix foldamer H9 and 14‐helix foldamer H14‐z are found to be most preferred for dipeptides 2 and 4 , respectively, as for dipeptides 1 and 3 , which indicates no remarkable influence of the C^α‐ethyl substitution on conformational preferences. The benzyl substitution at the C‐terminal end lead H14‐z to be the most preferred conformer for dipeptides 3 and 4 , whereas it is H9 for dipeptides 1 and 2 , which can be ascribed to the favored C? H···π interactions between the cyclohexyl group of the first residue and the C‐terminal benzyl group. There are only marginal changes in backbone structures and the distances and angles of H‐bonds for all local minima by C^α‐ethyl and/or benzyl substitutions. Although vibrational frequencies and intensities of the dipeptide 4 calculated at both M06‐2X/6‐31 + G(d) and M05‐2X/6‐31 + G(d) levels of theory are consistent with observed results in the gas phase, H14‐z is predicted to be most preferred by ΔG only at the former level of theory. Hydration did not bring the significant changes in backbone structures of helix foldamers for both dipeptide 1 and 4 . It is expected that the different substitutions at the C‐terminal end lead to the different helix foldamers, which may increase the resistance of helical structures to proteolysis and provide the more surface to the helical structures suitable for molecular recognition. © 2014 Wiley Periodicals, Inc. Biopolymers 101: 1077–1087, 2014.     

Nanostructures from the self‐assembly of α‐helical peptide amphiphiles

Self‐assembly of PAs composed of palmitic acid and several repeated heptad peptide sequences, C₁₅H₃₁CO‐(IEEYTKK)_n‐NH₂ (n = 1–4, represented by PA1–PA4), was investigated systematically. The secondary structures of the PAs were characterized by CD. PA3 and PA4 (n = 3 and 4, respectively) showed an α‐helical structure, whereas PA1 and PA2 (n = 1 and 2, respectively) did not display an α‐helical conformations under the tested conditions. The morphology of the self‐assembled peptides in aqueous medium was studied by transmission electron microscopy. As the number of heptad repeats in the PAs increased, the nanostructure of the self‐assembled peptides changed from nanofibers to nanovesicles. Changes of the secondary structures and the self‐assembly morphologies of PA3 and PA4 in aqueous medium with various cations were also studied. The critical micelle concentrations were determined using a pyrene fluorescence probe. In conclusion, this method may be used to design new peptide nanomaterials. Copyright © 2014 European Peptide Society and John Wiley & Sons, Ltd.     

Development of short and highly potent self‐assembling elastin‐derived pentapeptide repeats containing aromatic amino acid residues

Tropoelastin is the primary component of elastin, which forms the elastic fibers that make up connective tissues. The hydrophobic domains of tropoelastin are thought to mediate the self‐assembly of elastin into fibers, and the temperature‐mediated self‐assembly (coacervation) of one such repetitive peptide sequence (VPGVG) has been utilized in various bio‐applications. To elucidate a mechanism for coacervation activity enhancement and to develop more potent coacervatable elastin‐derived peptides, we synthesized two series of peptide analogs containing an aromatic amino acid, Trp or Tyr, in addition to Phe‐containing analogs and tested their functional characteristics. Thus, position 1 of the hydrophobic pentapeptide repeat of elastin (X¹P²G³V⁴G⁵) was substituted by Trp or Tyr. Eventually, we acquired a novel, short Trp‐containing elastin‐derived peptide analog (WPGVG)₃ with potent coacervation ability. From the results obtained during this process, we determined the importance of aromaticity and hydrophobicity for the coacervation potency of elastin‐derived peptide analogs. Generally, however, the production of long‐chain synthetic polypeptides in quantities sufficient for commercial use remain cost‐prohibitive. Therefore, the identification of (WPGVG)₃, which is a 15‐mer short peptide consisting simply of five natural amino acids and shows temperature‐dependent self‐assembly activity, might serve as a foundation for the development of various kinds of biomaterials. Copyright © 2015 European Peptide Society and John Wiley & Sons, Ltd.     

Interface‐Engineered All‐Solid‐State Li‐Ion Batteries Based on Garnet‐Type Fast Li+ Conductors

All‐solid‐state Li‐ion batteries based on Li₇La₃Zr₂O₁₂ (LLZO) garnet structures require novel electrode assembly strategies to guarantee a proper Li⁺ transfer at the electrode–electrolyte interfaces. Here, first stable cell performances are reported for Li‐garnet, c‐Li_6.25Al_0.25La₃Zr₂O₁₂, all‐solid‐state batteries running safely with a full ceramics setup, exemplified with the anode material Li₄Ti₅O₁₂. Novel strategies to design an enhanced Li⁺ transfer at the electrode–electrolyte interface using an interface‐engineered all‐solid‐state battery cell based on a porous garnet electrolyte interface structure, in which the electrode material is intimately embedded, are presented. The results presented here show for the first time that all‐solid‐state Li‐ion batteries with LLZO electrolytes can be reversibly charge–discharge cycled also in the low potential ranges (≈1.5 V) for combinations with a ceramic anode material. Through a model experiment, the interface between the electrode and electrolyte constituents is systematically modified revealing that the interface engineering helps to improve delivered capacities and cycling properties of the all‐solid‐state Li‐ion batteries based on garnet‐type cubic LLZO structures.     

Epimerization‐free synthesis of cyclic peptide by use of the O‐acyl isopeptide method

A head‐to‐tail cyclization of a protected linear hexapeptide with a C‐terminal O‐acyl isopeptide proceeded to give a cyclic O‐acyl isopeptide without epimerization. The cyclic O‐acyl isopeptide possessed different secondary structures compared with the native cyclic peptide. The isopeptide was then efficiently converted to the desired cyclic peptide via an O‐to‐N acyl migration reaction using a silica gel‐anchored base. Copyright © 2010 European Peptide Society and John Wiley & Sons, Ltd.     

Analysis of secondary structure and self‐assembly of amelogenin by variable temperature circular dichroism and isothermal titration calorimetry

Amelogenin is a proline‐rich enamel matrix protein known to play an important role in the oriented growth of enamel crystals. Amelogenin self‐assembles to form nanospheres and higher order structures mediated by hydrophobic interactions. This study aims to obtain a better insight into the relationship between primary–secondary structure and self‐assembly of amelogenin by applying computational and biophysical methods. Variable temperature circular dichroism studies indicated that under physiological pH recombinant full‐length porcine amelogenin contains unordered structures in equilibrium with polyproline type II (PPII) structure, the latter being more populated at lower temperatures. Increasing the concentration of rP172 resulted in the promotion of folding to an ordered β‐structured assembly. Isothermal titration calorimetry dilution studies revealed that at all temperatures, self‐assembly is entropically driven due to the hydrophobic effect and the molar heat of assembly (ΔH_A) decreases with temperature. Using a computational approach, a profile of domains in the amino acid sequence that have a high propensity to assemble and to have PPII structures has been identified. We conclude that the assembly properties of amelogenin are due to complementarity between the hydrophobic and PPII helix prone regions. Proteins 2009. © 2009 Wiley‐Liss, Inc.