Studies towards the development of chemically synthesized non-radioactive biotinylated nucleic acid hybridization probes.

Non-radioactive nucleic acid hybridization probes have been constructed in which the reporter group is long chain biotin chemically linked to a basic macromolecule (histone H1, cytochrome C or polyethyleneimine). The modified basic macromolecule which carries many biotin residues can, in turn, be covalently linked to nucleic acids (DNA) via the bifunctional cross-linking reagents, glutaraldehyde, 1,2,7,8-diepoxyoctane, bis (succinimidyl) suberate or bis (sulfonosuccinimidyl) suberate. This provides a very sensitive probe by which as little as between 10-50fg of target DNA can be visualized using dot-blot hybridization procedures in conjunction with avidin or streptavidin enzyme conjugates.     

Non-radioactive hybridization probes prepared by the chemical labelling of DNA and RNA with a novel reagent, photobiotin.

A photo-activatable analogue of biotin, N-(4-azido-2-nitrophenyl)-N'-(N-d-biotinyl-3-aminopropyl)-N'-methyl-1,3- propanediamine (photobiotin), has been synthesized and used for the rapid and reliable preparation of large amounts of stable, non-radioactive, biotin-labelled DNA and RNA hybridization probes. Upon brief irradiation with visible light, photobiotin formed stable linkages with single- and double-stranded nucleic acids yielding probes which were purified from excess reagent by 2-butanol extraction and ethanol precipitation. Using single-stranded phage M13 DNA probes chemically labelled with one biotin per 100-400 residues and dot-blot hybridization reactions on nitrocellulose, as little as 0.5 pg (6 X 10(-18) mol) of target DNA was detected colorimetrically by avidin or streptavidin complexes with acid or alkaline phosphatase from three commercial sources. The sensitivity of detection of target RNA in dot-blots and Northern blots was equivalent to that obtained with 32p-labelled DNA probes. Photobiotin was also used for the labelling of proteins with biotin.     

Monoadduct forming photochemical reagents for labeling nucleic acids for hybridization.

We describe the synthesis of three angelicin derivatives which can be used for labeling nucleic acids with biotin. These compounds were used to label nucleic acids in the presence of lysed cell constituents. The resulting labelled nucleic acids show hybridization to a genus specific probe for E. coli. The relative comparison of sensitivity indicates that a polyamine linker is better than a polyethylene oxide linker between the biotin and angelicin moieties.     

A Comparison of Digoxigenin and Biotin Labelled DNA and RNA Probes for in Situ Hybridization

A number of in situ hybridization protocols using digoxigenin or biotin labelled probes were assessed for viral nucleic acid detection in formalin fixed, paraffin embedded tissue. Single-step detection protocols for biotin labelled probes produced low sensitivity; however, enzyme based one-step detection protocols for digoxigenin probes produced high sensitivity for both RNA and DNA systems. For both probe types, multistep detection protocols produced equally high sensitivity. Use of an enhanced APAAP procedure for digoxigenin labelled probes acheived maximal sensitivity without use of biotin-streptavidin reactions. The sensitivity of nucleic acid detection obtained with a digoxigenin labelled probe is comparable to that obtained using biotin. Digoxigenin labelled probes for nucleic acid detection are recommended for tissues with endogenous biotin.     

Electrospray ionisation-cleavable tandem nucleic acid mass tag–peptide nucleic acid conjugates: synthesis and applications to quantitative genomic analysis using electrospray ionisation-MS/MS

The synthesis and characterization of isotopomer tandem nucleic acid mass tag–peptide nucleic acid (TNT–PNA) conjugates is described along with their use as electrospray ionisation-cleavable (ESI-Cleavable) hybridization probes for the detection and quantification of target DNA sequences by electrospray ionisation tandem mass spectrometry (ESI-MS/MS). ESI-cleavable peptide TNT isotopomers were introduced into PNA oligonucleotide sequences in a total synthesis approach. These conjugates were evaluated as hybridization probes for the detection and quantification of immobilized synthetic target DNAs using ESI-MS/MS. In these experiments, the PNA portion of the conjugate acts as a hybridization probe, whereas the peptide TNT is released in a collision-based process during the ionization of the probe conjugate in the electrospray ion source. The cleaved TNT acts as a uniquely resolvable marker to identify and quantify a unique target DNA sequence. The method should be applicable to a wide variety of assays requiring highly multiplexed, quantitative DNA/RNA analysis, including gene expression monitoring, genetic profiling and the detection of pathogens.     

Strategies for optimizing DNA hybridization on surfaces

Specific and predictable hybridization of the polynucleotide sequences to their complementary counterparts plays a fundamental role in the rational design of new nucleic acid nanodevices. Generally, nucleic acid hybridization can be performed using two major strategies, namely hybridization of DNA or RNA targets to surface-tethered oligonucleotide probes (solid-phase hybridization) and hybridization of the target nucleic acids to randomly distributed probes in solution (solution-phase hybridization). Investigations into thermodynamic and kinetic parameters of these two strategies showed that hybridization on surfaces is less favorable than that of the same sequence in solution. Indeed, the efficiency of DNA hybridization on surfaces suffers from three constraints: (1) electrostatic repulsion between DNA strands on the surface, (2) steric hindrance between tethered DNA probes, and (3) nonspecific adsorption of the attached oligonucleotides to the solid surface. During recent years, several strategies have been developed to overcome the problems associated with DNA hybridization on surfaces. Optimizing the probe surface density, application of a linker between the solid surface and the DNA-recognizing sequence, optimizing the pH of DNA hybridization solutions, application of thiol reagents, and incorporation of a polyadenine block into the terminal end of the recognizing sequence are among the most important strategies for enhancing DNA hybridization on surfaces.     

Electrospray ionisation-cleavable tandem nucleic acid mass tag-peptide nucleic acid conjugates: synthesis and applications to quantitative genomic analysis using electrospray ionisation-MS/MS

The synthesis and characterization of isotopomer tandem nucleic acid mass tag-peptide nucleic acid (TNT-PNA) conjugates is described along with their use as electrospray ionisation-cleavable (ESI-Cleavable) hybridization probes for the detection and quantification of target DNA sequences by electrospray ionisation tandem mass spectrometry (ESI-MS/MS). ESI-cleavable peptide TNT isotopomers were introduced into PNA oligonucleotide sequences in a total synthesis approach. These conjugates were evaluated as hybridization probes for the detection and quantification of immobilized synthetic target DNAs using ESI-MS/MS. In these experiments, the PNA portion of the conjugate acts as a hybridization probe, whereas the peptide TNT is released in a collision-based process during the ionization of the probe conjugate in the electrospray ion source. The cleaved TNT acts as a uniquely resolvable marker to identify and quantify a unique target DNA sequence. The method should be applicable to a wide variety of assays requiring highly multiplexed, quantitative DNA/RNA analysis, including gene expression monitoring, genetic profiling and the detection of pathogens.     

Use of bioluminescence in nucleic acid hybridization reactions

Luminescence reactions can be used to detect specific nucleic acid sequences hybridized with a nucleic probe. Different labels such as cytidine sulphone, fluorescein, and biotin can be incorporated into DNA or oligonucleotide molecules and detected by antibody or avidin conjugates coupled to glucose-6P dehydrogenase. On supports such as nitrocellulose filters, sensitivity is not greatly increased using luminescence, but detection is rapid and easy to perform using polaroid film. Moreover, hybridization can be performed with different labelled probes on the same sample. In solution, luminescence can be used to monitor sandwich reactions. The method is less sensitive than detection on filters but can easily be automated. The performance of these assays can be increased considerably by enzymatic amplification of the target catalysed by a thermostable polymerase.     

Functionalization of covalent DNA-streptavidin conjugates by means of biotinylated modulator components.

Covalent DNA-streptavidin conjugates are versatile biomolecular coupling reagents, since they have binding capacity for both a complementary nucleic acid and four molecules of biotin. The DNA-streptavidin hybrid molecules have been investigated for their capabilities to bind two different types of biotinylated components. Thus, (i) a functional biomolecule, e.g., a single-stranded DNA fragment or an enzyme and (ii) low-molecular weight biotin derivatives ("modulators") were coupled stepwise with the hybrid molecules. Modulators were D-biotin, aminobiotin, and biotin-fluorescein conjugate as well as a lysine-rich 10mer peptide, containing a biotin and a fluorescein substituent. These modulators were chosen to affected the hybridization properties of the DNA-streptavidin conjugates. As investigated by surface-plasmon resonance and microplate solid-phase hybridization measurements, D-biotin, biotin-fluorescein, and aminobiotin decreased the efficiency of hybridization with complementary, surface-bound oligonucleotides to a varying extent. The basic peptide increased the conjugate's hybridization efficiency. Moreover, it was demonstrated in two examples how modulators can be utilized as additional functional domains of streptavidin-based conjugates. First, fluorescein-containing modulators were used as hapten groups, allowing a sensitive detection by means of specific antibodies directed against the modulator. Second, the biotinylated peptide was used as a carrier molecule to attach multiple fluorogenic lanthanide-chelate groups to the streptavidin conjugate, enabling its sensitive detection by time-resolved fluorometry. The applicability of this kind of bioconjugation strategy to generate sensor-probes for gene detection assays was demonstrated.     

RNA-ligand interactions: affinity and specificity of aminoglycoside dimers and acridine conjugates to the HIV-1 Rev response element

Semisynthetic aminoglycoside derivatives may provide a means to selectively target viral RNA sites, including the HIV-1 Rev response element (RRE). The design, synthesis, and evaluation of derivatives based upon neomycin B, kanamycin A, and tobramycin conjugates of 9-aminoacridine are presented. To evaluate the importance of the acridine moiety, a series of dimeric aminoglycosides as well as unmodified "monomeric" aminoglycosides have also been evaluated for their nucleic acid affinity and specificity. Fluorescence-based binding assays that use ethidium bromide or Rev peptide displacement are used to quantify the affinities of these compounds to various nucleic acids, including the RRE, tRNA, and duplex DNA. All the modified aminoglycosides exhibit a high affinity for the Rev binding site on the RRE (K(d) 相似文献   

Use of glucose-6-phosphate dehydrogenase as a new label for nucleic acid hybridization reactions

We describe here a sensitive new procedure for detecting DNA hybridization by dot blots. The method utilizes DNA or oligonucleotide probes labeled with biotin, sulfone, or haptens that can be detected by glucose-6-phosphate dehydrogenase (G6PDH) conjugates. Biotin labeling of DNA gave the best sensitivity. G6PDH activity was revealed by staining or by bioluminescence using an FMN oxidoreductase and a luciferase from Beneckea harveyi. Bioluminescent detection offered better sensitivity and faster revelation than the colorimetric assay and was found to be very useful in visualizing single mutations in human DNA after hybridization with an allele-specific biotinylated oligonucleotide probe. Revelation can be performed using a luminometer, photographic films, or a very sensitive video camera. The detection is limited by the nonspecific binding of the labeled reagent (streptavidin or antibodies). This limit is similar to that obtained with other nonisotopic labeling procedures, but our method is faster and several hybridization reactions can be performed on the same support.     

Photochemical crosslinking of protein and DNA in chromatin. II. Synthesis and application of psoralen-cystamine-arylazido photocrosslinking reagents

The synthesis and testing of a new type of nucleic acid-protein photocrosslinking reagent is described. The reagents are composed of a psoralen ligand for nucleic acid photoattachment, which is linked to an azidobenzoyl group, for protein photoattachment. The linker contains a disulfide bridge which can be opened by reduction with mercaptans. The reagents were tested in a chromatin system, where it was found that they induced cleavable crosslinks between the histones and the DNA upon irradiation with long-wavelength ultraviolet light (lambda greater than 300 nm).     

Biotin reagents for antibody pretargeting. 4. Selection of biotin conjugates for in vivo application based on their dissociation rate from avidin and streptavidin

An investigation was conducted to determine the affect of structural variation of biotin conjugates on their dissociation rates from Av and SAv. This information was sought to help identify optimal biotin derivatives for in vivo applications. Fifteen biotin derivatives were conjugated with a cyanocobalamin (CN-Cbl) derivative for evaluation of their "relative" dissociation rates by size exclusion HPLC analysis. Two biotin-CN-Cbl conjugates, one containing unaltered biotin and the other containing iminobiotin, were prepared as reference compounds for comparison purposes. The first structural variations studied involved modification of the biotinamide bond with a N-methyl moiety (i.e., sarcosine conjugate), lengthening the valeric acid side chain by a methylene unit (i.e., homobiotin), and replacing the biotinamide bond with thiourea bonds in two conjugates. The rate of dissociation of the biotin-CN-Cbl derivative from Av and SAv was significantly increased for biotin derivatives containing those structural features. Nine additional biotin conjugates were obtained by coupling amino acids or functional group protected amino acids to the biotin moiety. In the conjugates, the biotin moiety and biotinamide bond were not altered, but substituents of various sizes were introduced alpha to the biotinamide bond. The results obtained from HPLC analyses indicated that the rate of dissociation from Av or SAv was not affected by small substituents alpha to the biotinamide (e.g., methyl, hydroxymethyl, and carboxylate groups), but was significantly increased when larger functional groups were present. On the basis of the results obtained, it appears that biotin conjugates which retain an unmodified biotin moiety and have a linker molecule conjugated to it that has a small functional group (e.g., hydroxymethylene or carboxylate) alpha to the biotinamide bond are excellent candidates for in vivo applications. These structural features are obtained in the biotin amino acid conjugates: biotin-serine, biotin-aspartate, biotin-lysine, and biotin-cysteine. Importantly, these biotin derivatives can be readily conjugated with other molecules for specific in vivo applications. In our studies, these derivatives will be used in the design of new biotin conjugates to carry radionuclides for cancer therapy using the pretargeting approach.     

Triplex mediated delivery of a platinum complex to a specific DNA target site

Tethering an ethylene diamine linker to the 5' terminus of an oligothymidine sequence provides a site for complexation with K(2)PtCl(4). Due to the low reactivity of dT toward a platinum source, we chose dT(8) and dT(15) as our initial synthetic targets for platination. Post-synthetic reaction of the platinum reagent with the diamino oligothymidine generates the diamino dichloro platinum-DNA conjugate that can be used for DNA duplex targeting by oligodeoxyncleotide-mediated triplex formation. The dT(8) sequence is not sufficiently long to facilitate triplex formation and Pt-cross-linking, whereas with a dT(15) sequence cross-linking between the third strand and the duplex occurs exclusively with the duplex target strand directly involved in triplex formation. No examples of cross-linking to the complementary target strand, or of cross-linking to both target strands are observed. Most efficient cross-linking occurs when the dinucleotide d(GpG) is present in the target strand and no cross-linking occurs with the corresponding 7-deazaG dinucleotide target. Cross-linking is also observed when dC or dA residues are present in the target strand, or even with a single dG residue, but it is not observed in any cases to dT residues. Triplex formation provides the ability to target specific sequences of double-stranded DNA and the orientational control arising from triplex formation is sufficient to alter the binding preferences of platinum. Conjugates of the type described here offer the potential of delivering a platinum complex to a specific DNA site.     

Construction of DNA-probes and their immunochemical detection using nonradioactive hybridization tests

Simple and efficient chemical approaches to preparation of DNA probes carrying 2,4-dinitrophenyl, dansyl or biotin residues were developed. The residues were introduced using following DNA derivatization procedures: a) transamination of cytidine residues with O-(4-aminobutyl)hydroxylamine; b) mercuration of pyrimidine residues followed by beta-mercaptoethanol modification. It was shown that 2,4-dinitrophenyl-containing DNA probes can be used for nonradioactive hybridization detection of nucleic acids. DNP-DNA: DNA complexes were detected using mouse antibodies specific to 2,4-dinitrophenyl groups, which were developed with peroxidase-conjugated antimouse immunoglobulins. Peroxidase-catalyzed chemoluminescent reaction of luminol oxidation with hydrogen peroxide allowed to detect 10 picograms of the dinitrophenylated single-stranded DNA probe.     

Specific Neisseria gonorrhoeae DNA-probes derived from ribosomal RNA

Eighteen sequences complementary to less-conserved regions within the 16S and 23S ribosomal ribonucleic acid (rRNA) of Neisseria gonorrhoeae were subcloned or chemically synthesized and used as probes in a dot-spot deoxyribonucleic acid (DNA): DNA hybridization format. Some of these probes exclusively detected Neisseria gonorrhoeae nucleic acid, whereas others also showed hybridization signals with nucleic acid from other bacterial species. Our results indicate that rRNA-derived DNA-probes can be used to differentiate between very closely related taxa without the use of Southern-blot analysis.     

Use of non-radioactive biotin-labelled probes for detecting hepatitis A virus]

The biotin-labeled DNA probes were constructed on the basis of the hybrid bacteriophage M13nip 9 single-stranded DNA containing the fragments of the hepatitis A viral cDNA. The probes were biotin treated by chemical modification of the DNA by the peraminating reagent or photochemically. The labeled DNA probes were used in molecular hybridization experiments with the nuclear acids fixed on the nitrocellulose filters. The biotin treated DNA was determined by the avidin-gold colloid conjugate with the subsequent physical silver amplification or by the streptavidin-alkaline phosphatase conjugate. The sensitivity of both probes was identical and permitted the determination of 5 x 10(-11)-5 x 10(-12) g of the control DNA and 10(-9) g of the hepatitis A virus. The developed test systems were used for detection of the viral RNA in blood from patients.     

Labeling of DNA probes with a photoactivatable hapten

A photoactivatable reagent for introducing haptens onto DNA probes has been prepared using a commercially available bifunctional linker arm reagent and amino-derivatized 2,4-dinitrophenyl (DNP). The resulting compound (photo-DNP) couples efficiently to DNA using an ordinary sunlamp. Under optimum conditions, about 7-23 DNP molecules per 1000 bases are incorporated into the DNA. Hybridization experiments demonstrate that as little as 1.5 x 10(5) copies of target DNA can be detected by filter hybridization with a photo-DNP-labeled probe and immunochemical detection.     

两种DNA探针杂交检测结核分支杆菌方法的研究

为改进结核杆菌DNA探针的特异性与实用性,研制了以生物素标记的两种对结核分支杆菌特异的DNA探针:一个5’端标记的20bp的寡核苷酸探针和一个采用PCR方法合成的188bp长链探针。两种探针分别与结核分支杆菌的全染色体DNA,以及基因组上IS6110序列的一段317bp的PCR扩增产物进行斑点杂交,以碱性磷酸酶(AP)催化的染色反应检测,测试了两个探针的敏感性和特异性。系统地比较研究了两种探针杂交检测条件:探针的浓度选择,杂交温度与洗膜温度的选择,以及杂交与洗膜温度对检测的敏感性与特异性的影响。寡核苷酸探针和188bp探针杂交检测纯化结核分支杆菌基因组DNA的敏感性分别为100ng与6ng,杂交检测PCR产物的敏感性分别是400pg与50pg。两探针的最佳杂交浓度均为40～160ng/ml,最佳杂交温度分别是42℃与68℃,最佳洗膜温度分别是60℃与60～68℃之间。两种探针均仅与结核分支杆菌及BCG有杂交信号,而与其它受试分支杆菌及非分支杆菌杂交结果都呈阴性。它们的特异性都很强,但188bp探针的敏感性约是寡核苷酸探针的7～16倍,而且188bp探针检测本底较低,是检测结核分支杆菌的较佳选择     

Surface density dependence of PCR amplicon hybridization on PNA/DNA probe layers

Surface plasmon field-enhanced fluorescence spectroscopy was employed to extensively investigate the hybridization behaviors of polymerase chain reaction (PCR) amplicons on a peptide nucleic acid (PNA) or DNA probe layer that was previously attached on a streptavidin-modified gold surface via biotin/streptavidin interaction. Despite the neutral backbone of PNA, the hybridization reactions were strongly influenced by the variation of ionic strength. The association rates exhibited a monotonic decrease with ionic strength increase and the maximum hybridization signal was achieved at an intermediate sodium concentration (approximately 100 mM). These effects were mainly ascribed to the electrostatic cross talk among the hybridized DNA molecules and the secondary structure of PCR amplicons. For the negatively charged DNA probes, the hybridization reaction was subjected additionally to the DNA/DNA electrostatic barrier, particularly in lower ionic strength range (e.g., 10 approximately 150 mM Na(+)). The electrostatic cross talk was shown to be largely reduced if the PNA probe layer was sufficiently diluted by following a strategic templated immobilization method. As a consequence, a pseudo-first-order kinetic model was applicable to describe the hybridization kinetics, and affinity constants were derived for evaluating the influence of single nucleotide polymorphisms (SNPs).