RNA heptamers that direct RNA cleavage by mammalian tRNA 3' processing endoribonuclease.

Mammalian tRNA 3' processing endoribonuclease (3' tRNase) can recognize and cleave any target RNA that forms a precursor tRNA-like complex with another RNA. Various sets of RNA molecules were tested to identify the smallest RNA that can direct target RNA cleavage by 3' tRNase. A 3' half tRNAArgwas cleaved efficiently by 3' tRNase in the presence of small 5' half tRNAArgvariants, the D stem-loop region of which was partially deleted. Remarkably, 3' tRNase also cleaved the 3' half tRNAArgin the presence of a 7 nt 5' tRNAArg composed only of the acceptor stem region with a catalytic efficiency comparable with that of cleavage directed by an intact 5' half tRNAArg. The catalytic efficiency of cleavage directed by the heptamer decreased as the stability of the T stem-loop structures of 3' half tRNAArg variants decreased. No heptamer-directed cleavage of a 3' half tRNAArg without T stem base pairs was detected. A heptamer also directed cleavage of an HIV-1 RNA containing a stable hairpin structure. These findings suggest that in the presence of an RNA heptamer, 3' tRNase can discriminate and eliminate target RNAs that possess a stable hairpin adjacent to the heptamer binding sequence from a large complex RNA pool.     

Arabidopsis Encodes Four tRNase Z Enzymes

Functional transfer RNA (tRNA) molecules are a prerequisite for protein biosynthesis. Several processing steps are required to generate the mature functional tRNA from precursor molecules. Two of the early processing steps involve cleavage at the tRNA 5′ end and the tRNA 3′ end. While processing at the tRNA 5′ end is performed by RNase P, cleavage at the 3′ end is catalyzed by the endonuclease tRNase Z. In eukaryotes, tRNase Z enzymes are found in two versions: a short form of about 250 to 300 amino acids and a long form of about 700 to 900 amino acids. All eukaryotic genomes analyzed to date encode at least one long tRNase Z protein. Of those, Arabidopsis (Arabidopsis thaliana) is the only organism that encodes four tRNase Z proteins, two short forms and two long forms. We show here that the four proteins are distributed to different subcellular compartments in the plant cell: the nucleus, the cytoplasm, the mitochondrion, and the chloroplast. One tRNase Z is present only in the cytoplasm, one protein is found exclusively in mitochondria, while the third one has dual locations: nucleus and mitochondria. None of these three tRNase Z proteins is essential. The fourth tRNase Z protein is present in chloroplasts, and deletion of its gene results in an embryo-lethal phenotype. In vitro analysis with the recombinant proteins showed that all four tRNase Z enzymes have tRNA 3′ processing activity. In addition, the mitochondrial tRNase Z proteins cleave tRNA-like elements that serve as processing signals in mitochondrial mRNA maturation.     

Two archaeal tRNase Z enzymes: similar but different

The endoribonuclease tRNase Z plays an essential role in tRNA metabolism by removal of the 3' trailer element of precursor RNAs. To investigate tRNA processing in archaea, we identified and expressed the tRNase Z from Haloferax volcanii, a halophilic archaeon. The recombinant enzyme is a homodimer and efficiently processes precursor tRNAs. Although the protein is active in vivo at 2-4 M KCl, it is inhibited by high KCl concentrations in vitro, whereas 2-3 M (NH(4))(2)SO(4) do not inhibit tRNA processing. Analysis of the metal content of the metal depleted tRNase Z revealed that it still contains 0.4 Zn(2+) ions per dimer. In addition tRNase Z requires Mn(2+) ions for processing activity. We compared the halophilic tRNase Z to the homologous one from Pyrococcus furiosus, a thermophilic archaeon. Although both enzymes have 46% sequence similarity, they differ in their optimal reaction conditions. Both archaeal tRNase Z proteins process mitochondrial pre-tRNAs. Only the thermophilic tRNase Z shows in addition activity toward intron containing pre-tRNAs, 5' extended precursors, the phosphodiester bis(p-nitrophenyl)phosphate (bpNPP) and the glyoxalase II substrate S-D: -lactoylglutathion (SLG).     

Naturally occurring mutations in human mitochondrial pre-tRNASer(UCN) can affect the transfer ribonuclease Z cleavage site, processing kinetics, and substrate secondary structure

tRNAs are transcribed as precursors with a 5' end leader and a 3' end trailer. The 5' end leader is processed by RNase P, and in most organisms in all three kingdoms, transfer ribonuclease (tRNase) Z can endonucleolytically remove the 3' end trailer. Long ((L)) and short ((S)) forms of the tRNase Z gene are present in the human genome. tRNase Z(L) processes a nuclear-encoded pre-tRNA approximately 1600-fold more efficiently than tRNase Z(S) and is predicted to have a strong mitochondrial transport signal. tRNase Z(L) could, thus, process both nuclear- and mitochondrially encoded pre-tRNAs. More than 150 pathogenesis-associated mutations have been found in the mitochondrial genome, most of them in the 22 mitochondrially encoded tRNAs. All the mutations investigated in human mitochondrial tRNA(Ser(UCN)) affect processing efficiency, and some affect the cleavage site and secondary structure. These changes could affect tRNase Z processing of mutant pre-tRNAs, perhaps contributing to mitochondrial disease.     

Specific cleavage of target RNAs from HIV-1 with 5' half tRNA by mammalian tRNA 3' processing endoribonuclease.

Mammalian tRNA 3' processing endoribonuclease (3' tRNase) can be converted to an RNA cutter that recognizes four bases, with about a 65-nt 3'-truncated tRNA(Arg) or tRNA(Ala). The 3'-truncated tRNA recognizes the target RNA via four base pairings between the 5'terminal sequence and a sequence 1-nt upstream of the cleavage site, resulting in a pre-tRNA-like complex (Nashimoto M, 1995, Nucleic Acids Res 23:3642-3647). Here I developed a general method for more specific RNA cleavage using 3' tRNase. In the presence of a 36-nt 5' half tRNA(Arg) truncated after the anticodon, 3' tRNase cleaved the remaining 56-nt 3' half tRNA(Arg) with a 19-nt 3' trailer after the discriminator. This enzyme also cleaved its derivatives with a 5' extra sequence or nucleotide changes or deletions in the T stem-loop and extra loop regions, although the cleavage efficiency decreases as the degree of structural change increases. This suggests that any target RNA can be cleaved site-specifically by 3'tRNase in the presence of a 5' half tRNA modified to form a pre-tRNA-like complex with the target. Using this method, two partial HIV-1 RNA targets were cleaved site-specifically in vitro. These results also indicate that the sequence and structure of the T stem-loop domain are important, but not essential, for the recognition of pre-tRNAs by 3' tRNase.     

The N-terminal half-domain of the long form of tRNase Z is required for the RNase 65 activity

Transfer RNA (tRNA) 3′ processing endoribonuclease (tRNase Z) is an enzyme responsible for the removal of a 3′ trailer from pre-tRNA. There exists two types of tRNase Z: one is a short form (tRNase ZS) that consists of 300–400 amino acids, and the other is a long form (tRNase ZL) that contains 800–900 amino acids. Here we investigated whether the short and long forms have different preferences for various RNA substrates. We examined three recombinant tRNase ZSs from human, Escherichia coli and Thermotoga maritima, two recombinant tRNase ZLs from human and Saccharomyces cerevisiae, one tRNase ZL from pig liver, and the N- and C-terminal half regions of human tRNase ZL for cleavage of human micro-pre-tRNA^Arg and the RNase 65 activity. All tRNase ZLs cleaved the micro-pre-tRNA and showed the RNase 65 activity, while all tRNase ZSs and both half regions of human tRNase ZL failed to do so with the exception of the C-terminal half, which barely cleaved the micro-pre-tRNA. We also show that only the long forms of tRNase Z can specifically cleave a target RNA under the direction of a new type of small guide RNA, hook RNA. These results indicate that indeed tRNase ZL and tRNase ZS have different substrate specificities and that the differences are attributed to the N-terminal half-domain of tRNase ZL. Furthermore, the optimal concentrations of NaCl, MgCl₂ and MnCl₂ differed between tRNase ZSs and tRNase ZLs, and the K_m values implied that tRNase ZLs interact with pre-tRNA substrates more strongly than tRNase ZSs.     

Unstructured RNA is a substrate for tRNase Z

tRNase Z, which exists in almost all cells, is believed to be working primarily for tRNA 3' maturation. In Escherichia coli, however, the tRNase Z gene appears to be dispensable under normal growth conditions, and its physiological role is not clear. Here, to investigate a possibility that E. coli tRNase Z cleaves RNAs other than pre-tRNAs, we tested several unstructured RNAs for cleavage. Surprisingly, all these substrates were cleaved very efficiently at multiple sites by a recombinant E. coli enzyme in vitro. tRNase Zs from Bacillus subtilis and Thermotoga maritima also cleaved various unstructured RNAs. The E. coli and B. subtilis enzymes seem to have a tendency to cleave after cytidine or before uridine, while cleavage by the T. maritima enzyme inevitably occurred after CCA in addition to the other cleavages. Assays to determine optimal conditions indicated that metal ion requirements differ between B. subtilis and T. maritima tRNase Zs. There was no significant difference in the observed rate constant between unstructured RNA and pre-tRNA substrates, while the K(d) value of a tRNase Z/unstructured RNA complex was much higher than that of an enzyme/pre-tRNA complex. Furthermore, eukaryotic tRNase Zs from yeast, pig, and human cleaved unstructured RNA at multiple sites, but an archaeal tRNase Z from Pyrobaculum aerophilum did not.     

Nucleotide sequence of the 235 rRNA from Haloferax mediterranei and phylogenetic analysis of halophilic archaea based on LSU rRNA

23S rRNA gene from the halophilic archaeon Haloferax mediterranei (strain ATCC 33500) was cloned and sequenced. Proceeding from the 2,912 nucleotides long sequence, the secondary structure of Haloferax genus large subunit rRNA was proposed. Haloferax mediterranei intergenic spacers 16S/23S and 23S/5S were also sequenced, and found to be 382 and 116 nucleotides long respectively. The 16S/23S spacer showed an Ala-tRNA intervening sequence, which is a common feature in Euryarchaeota. Sequence analysis of 23S rRNA and 16S rRNA was performed for the six organisms from the family Halobacteriaceae with both available gene sequences. Phylogenetic trees with completely different topology were obtained using both molecules.     

Identification and Sequence Analysis of Metazoan tRNA 3'-End Processing Enzymes tRNase Zs

tRNase Z is the endonuclease responsible for removing the 3'-trailer sequences from precursor tRNAs, a prerequisite for the addition of the CCA sequence. It occurs in the short (tRNase Z(S)) and long (tRNase Z(L)) forms. Here we report the identification and sequence analysis of candidate tRNase Zs from 81 metazoan species. We found that the vast majority of deuterostomes, lophotrochozoans and lower metazoans have one tRNase Z(S) and one tRNase Z(L) genes, whereas ecdysozoans possess only a single tRNase Z(L) gene. Sequence analysis revealed that in metazoans, a single nuclear tRNase Z(L) gene is likely to encode both the nuclear and mitochondrial forms of tRNA 3'-end processing enzyme through mechanisms that include alternative translation initiation from two in-frame start codons and alternative splicing. Sequence conservation analysis revealed a variant PxKxRN motif, PxPxRG, which is located in the N-terminal region of tRNase Z(S)s. We also identified a previously unappreciated motif, AxDx, present in the C-terminal region of both tRNase Z(S)s and tRNase Z(L)s. The AxDx motif consisting mainly of a very short loop is potentially close enough to form hydrogen bonds with the loop containing the PxKxRN or PxPxRG motif. Through complementation analysis, we demonstrated the likely functional importance of the AxDx motif. In conclusion, our analysis supports the notion that in metazoans a single tRNase Z(L) has evolved to participate in both nuclear and mitochondrial tRNA 3'-end processing, whereas tRNase Z(S) may have evolved new functions. Our analysis also unveils new evolutionarily conserved motifs in tRNase Zs, including the C-terminal AxDx motif, which may have functional significance.     

The T loop structure is dispensable for substrate recognition by tRNase ZL

tRNA 3'-processing endoribonucleases (tRNase Z, or 3'-tRNase; EC 3.1.26.11) are enzymes that remove 3'-trailers from pre-tRNAs. An about 12-base-pair stem, a T loop-like structure, and a 3'-trailer were considered to be the minimum requirements for recognition by the long form (tRNase ZL) of tRNase Z; tRNase ZL can recognize and cleave a micro-pre-tRNA or a hooker/target RNA complex that resembles a micro-pre-tRNA. We examined four hook RNAs containing systematically weakened T stems for directing target RNA cleavage by tRNase ZL. As expected, the cleavage efficiency decreased with the decrease in T stem stability, and to our surprise, even the hook RNA that forms no T stem-loop-directed slight cleavage of the target RNA, suggesting that the T stem-loop structure is important but dispensable for substrate recognition by tRNase ZL. To analyze the effect of the T loop on substrate recognition, we compared the cleavage reaction for a micro-pre-tRNA with that for a 12-base-pair double-stranded RNA, which is the same as the micro-pre-tRNA except for the lack of the T loop structure. The observed rate constant value for the double-stranded RNA was comparable with that for the micro-pre-tRNA, whereas the K(d) value for the complex with the double-stranded RNA was much higher than that for the complex with the micro-pre-tRNA. These results suggest that the T loop structure is not indispensable for the recognition, although the interaction between the T loop and the enzyme exists. Cleavage assays for such double-stranded RNA substrates of various lengths suggested that tRNase ZL can recognize and cleave double-stranded RNA substrates that are longer than 5 base pairs and shorter than 20 base pairs. We also showed that double-stranded RNA is not a substrate for the short form of tRNase Z.     

Secondary structure maps of ribosomal RNA. II. Processing of mouse L-cell ribosomal RNA and variations in the processing pathway

Secondary structure mapping in the electron microscope was applied to ribosomal RNA and precusor ribosomal RNA molecules isolated from nucleoli and the cytoplasm of mouse L-cells. Highly reproducible loop patterns were observed in these molecules. The polarity of L-cell rRNA was determined by partial digestion with 3′-exonuclease. The 28 S region is located at the 5′-end of the 45 S rRNA precursor. Together with earlier experiments on labeling kinetics, these observations established a processing pathway for L-cell rRNA. The 45 S rRNA precursor is cleaved at the 3′-end of the 18 S RNA sequence to produce a 41 S molecule and a spacer-containing fragment (24 S RNA). The 41 S rRNA is cleaved forming mature 18 S rRNA and a 36 S molecule. The 36 S molecule is processed through a 32 S intermediate to the mature 28 S rRNA. This pathway is similar to that found in HeLa cells, except that in L-cells a 36 S molecule occurs in the major pathway and no 20 S precusor to 18 S RNA is found. The processing pathway and its intermediates in L-cells are analogous to those in Xenopus laevis, except for a considerable size difference in all rRNAs except 18 S rRNA.The arrangement of gene and transcribed spacer regions and of secondary structure loops, as well as the shape of the major loops were compared in L-cells, HeLa cell and Xenopus rRNA. The over-all arrangement of regions and loop patterns is very similar in the RNA from these three organisms. The shapes of loops in mature 28 S RNA are also highly conserved in evolution, but the shapes of loops in the transcribed spacer regions vary greatly. These observations suggest that the sequence complementarity that gives rise to this highly conserved secondary structure pattern may have some functional importance.     

Anomalous RNA substrates for mammalian tRNA 3' processing endoribonuclease

Mammalian tRNA 3' processing endoribonuclease (3' tRNase) is an enzyme responsible for the removal of a 3' trailer from pre-tRNA. The enzyme can also recognize and cleave any target RNA that forms a pre-tRNA-like complex with another RNA. To investigate the interaction between 3' tRNase and substrates, we tested various anomalous pre-tRNA-like complexes for cleavage by pig 3' tRNase. We examined how base mismatches in the acceptor stem affect 3' tRNase cleavage of RNA complexes, and found that even one base mismatch in the acceptor stem drastically reduces the cleavage efficiency. Mammalian 3' tRNase was able to recognize complexes between target RNAs and 5'-half tDNAs, and cleave the target RNAs, although inefficiently, whereas the enzyme had no activity to cleave phosphodiester bonds of DNA. A relatively long RNA target, the Escherichia coli chloramphenicol acetyltransferase (CAT) mRNA, was cleaved by 3' tRNase in the presence of appropriate 5'-half tRNAs. We also demonstrated that an RNA complex of lin-4 and lin-14 from Caenorhabditis elegans can be recognized and cleaved by pig 3' tRNase.     

Conversion of mammalian tRNA 3' processing endoribonuclease to four-base-recognizing RNA cutters.

The spermidine-dependent, sequence-specific endoribonuclease (RNase 65) activities in mammalian cell extracts require both protein and 3' truncated tRNA, species of which direct their substrate sequence specificity. Computer analysis for searching possible base pairing between substrate RNAs and their corresponding 3' truncated tRNA, suggested a unified model for substrate recognition mechanism, in which a four-nucleotide (nt) sequence in the target tRNAs 1 nt upstream of their cleavage site, base pairs with the 5' terminal 4 nt sequence of their corresponding 3' truncated tRNA. This model was supported by experiments with several RNA substrates containing a substituted nucleotide in the target 4 nt sequence. In this model, the tRNA substrates and their corresponding 3' truncated tRNA form a complex resembling a 5' processed tRNA precursor containing a 3' trailer, suggesting that the protein component of RNase 65 is identical to tRNA 3' processing endoribonuclease (3' tRNase). Actually, 3' tRNase purified from pig liver cleaved the target RNAs at the expected sites only in the presence of their corresponding 3' truncated tRNA. These results show that the 3' tRNase can be converted to 4 nt specific RNA cutters using the 3' truncated tRNAs.     

Two distinct recognition signals define the site of endonucleolytic cleavage at the 5'-end of yeast 18S rRNA.

Three of the four eukaryotic ribosomal RNA molecules (18S, 5.8S and 25-28S rRNA) are transcribed as a single precursor, which is subsequently processed into the mature species by a complex series of cleavage and modification reactions. Early cleavage at site A1 generates the mature 5'-end of 18S rRNA. Mutational analyses have identified a number of upstream regions in the 5' external transcribed spacer (5' ETS), including a U3 binding site, which are required in cis for processing at A1. Nothing is known, however, about the requirement for cis-acting elements which define the position of the 5'-end of the 18S rRNA or of any other eukaryotic rRNA. We have introduced mutations around A1 and analyzed them in vivo in a genetic background where the mutant pre-rRNA is the only species synthesized. The results indicate that the mature 5'-end of 18S rRNA in yeast is identified by two partially independent recognition systems, both defining the same cleavage site. One mechanism identifies the site of cleavage at A1 in a sequence-specific manner involving recognition of phylogenetically conserved nucleotides immediately upstream of A1 in the 5' ETS. The second mechanism specifies the 5'-end of 18S rRNA by spacing the A1 cleavage at a fixed distance of 3 nt from the 5' stem-loop/pseudoknot structure located within the mature sequence. The 5' product of the A1 processing reaction can also be identified, showing that, in contrast to yeast 5.8S rRNA, the 5'-end of 18S rRNA is generated by endonucleolytic cleavage.     

tRNase Z核酸内切酶的研究进展

tRNase Z是一种核酸内切酶,许多细菌、大多数真核生物以及所有的古细菌的tRNA3’末端加工过程都是由核酸内切酶tRNase Z催化的。tRNase Z能催化缺乏CCA的tRNA前体生成末尾带有核苷酸识别的3’-OH和5’磷酸尾巴的成熟tRNA。这对于CCA序列的添加、tRNA的氨酰化和蛋白质的合成十分重要。tRNase Z属于metallo-β-lactamases(MBL)超家族,存在短(tRNase ZS)和长(tRNase ZL)两种形式,具有tRNA 3’末端加工、引导定位蛋白、加工rRNA、与Rex2P的相互作用、调节细胞分化与分裂等功能。预期对tRNaseZ的功能和属性不断深入研究将会对AIDS和前列腺癌的治疗具有潜在和实际的推动作用。     

Crystal structure of the tRNA 3' processing endoribonuclease tRNase Z from Thermotoga maritima

The maturation of the tRNA 3' end is catalyzed by a tRNA 3' processing endoribonuclease named tRNase Z (RNase Z or 3'-tRNase) in eukaryotes, Archaea, and some bacteria. The tRNase Z generally cuts the 3' extra sequence from the precursor tRNA after the discriminator nucleotide. In contrast, Thermotoga maritima tRNase Z cleaves the precursor tRNA precisely after the CCA sequence. In this study, we determined the crystal structure of T. maritima tRNase Z at 2.6-A resolution. The tRNase Z has a four-layer alphabeta/betaalpha sandwich fold, which is classified as a metallo-beta-lactamase fold, and forms a dimer. The active site is located at one edge of the beta-sandwich and is composed of conserved motifs. Based on the structure, we constructed a docking model with the tRNAs that suggests how tRNase Z may recognize the substrate tRNAs.