Evolution of a degradative bacterial consortium during the enrichment of naphtha solvent

A microbial mixed culture able to degrade naphtha solvent, a model of hydrocarbon aromatic mixture, was isolated from a hydrocarbon-polluted soil. Composition of the population was monitored by phenotypic and molecular methods applied on soil DNA, on whole enrichment culture DNA, and on 85 isolated strains. Strains were characterized for their 16S rDNA restriction profiles and for their random amplified polymorphic DNA profiles. Catabolic capabilities were monitored by phenotypic traits and by PCR assays for the presence of the catabolic genes methyl mono-oxygenase ( xylA, M), catechol 2,3 dioxygenase (xylE) and toluene dioxygenase (todC1) of TOL and TOD pathways. Different haplotypes belonging to Pseudomonas putida, Ps. aureofaciens and Ps. aeruginosa were found to degrade aromatic compounds and naphtha solvent. The intrinsic catabolic activity of the microbial population of the polluted site was detected by PCR amplification of the xylE gene directly from soil DNA.     

Rapid and sensitive detection by PCR of mpcI gene in the rhizosphere

Abstract: A simple and sensitive detection system, using polymerase chain reaction (PCR) and a soil microcosm, was developed to detect a bacterial catabolic gene in the rhizosphere. The inoculated population of Alcaligenes eutrophus JMP134, a phenol and 2,4-dichlorophenoxy acetic acid utilizer, was readily detected by this technique, which permitted taking of samples from specific locations of root (including rhizosphere) and soil. The number of JMP134 viable cells (10²–10³ cells), typically picked up by the nitrocellulose filter strip method, yielded sufficient amount of the target DNA to be detected by PCR. Primers encoding metapyrocatechase I (MPC I; catechol 2,3-dioxygenase) enabled the discrimination of at least five viable cells of JMP134 among the indigenous microorganisms inhabiting bush bean roots. This simplified PCR detection procedure facilitated monitoring of the specific degradative gene in the rhizosphere in only 5 h.     

Alternative primer sets for PCR detection of genotypes involved in bacterial aerobic BTEX degradation: distribution of the genes in BTEX degrading isolates and in subsurface soils of a BTEX contaminated industrial site

Eight new primer sets were designed for PCR detection of (i) mono-oxygenase and dioxygenase gene sequences involved in initial attack of bacterial aerobic BTEX degradation and of (ii) catechol 2,3-dioxygenase gene sequences responsible for meta-cleavage of the aromatic ring. The new primer sets allowed detection of the corresponding genotypes in soil with a detection limit of 10(3)-10(4) or 10(5)-10(6) gene copies g(-1) soil, assuming one copy of the gene per cell. The primer sets were used in PCR to assess the distribution of the catabolic genes in BTEX degrading bacterial strains and DNA extracts isolated from soils sampled from different locations and depths (vadose, capillary fringe and saturated zone) within a BTEX contaminated site. In both soil DNA and the isolates, tmoA-, xylM- and xylE1-like genes were the most frequently recovered BTEX catabolic genes. xylM and xylE1 were only recovered from material from the contaminated samples while tmoA was detected in material from both the contaminated and non-contaminated samples. The isolates, mainly obtained from the contaminated locations, belonged to the Actinobacteria or Proteobacteria (mainly Pseudomonas). The ability to degrade benzene was the most common BTEX degradation phenotype among them and its distribution was largely congruent with the distribution of the tmoA-like genotype. The presence of tmoA and xylM genes in phylogenetically distant strains indicated the occurrence of horizontal transfer of BTEX catabolic genes in the aquifer. Overall, these results show spatial variation in the composition of the BTEX degradation genes and hence in the type of BTEX degradation activity and pathway, at the examined site. They indicate that bacteria carrying specific pathways and primarily carrying tmoA/xylM/xylE1 genotypes, are being selected upon BTEX contamination.     

Rapid method for the detection of genetically engineered microorganisms by polymerase chain reaction from soil and sediments

A rapid and sensitive method for the detection of genetically engineered microorganisms in soil and sediments has been devised by in vitro amplification of the target DNAs by a polymerase chain reaction. A cloned catechol 2,3-dioxygenase gene located on the recombinant plasmid pOH101 was transferred to Pseudomonas putida MMB2442 by triparental crossing and used as a target organism. For the polymerase chain reaction from soil and sediment samples, the template DNA was released from a 100-mg soil sample. Bacterial seeded soil samples were washed with Tris-EDTA buffer (pH 8.0) and treated with a detergent lysis solution at 100°C. After addition of 1% polyvinylpolypyrrolidine solution, the samples were boiled for 5 min. Supernatant containing nucleic acid was purified with a PCR purification kit. The purified DNA was subjected to polymerase chain reaction, using two specific primers designed for the amplification of catechol 2,3-dioxygenase gene sequences. The detection limit was 10² cells per gram of soil. This method is rapid and obviates the need for lengthy DNA purification from soil samples. Received 28 February 1997/ Accepted in revised form 23 November 1997     

Rapid and specific identification of nitrile hydratase (NHase)-encoding genes in soil samples by polymerase chain reaction

A polymerase chain reaction (PCR) protocol was developed for the specific detection of genes coding nitrile hydratase (NHase). Primer design was based on the highly conserved sequences found in the coding region of the alpha-subunit gene corresponding to the metal-binding site. Purified genomic DNA from bacterial strains or directly from soil can serve as the target for the PCR, thus affording a simple and rapid method for screening NHase genes. The primer pairs, NHCo1/NHCo2 and NHFe1/NHFe2 yield PCR products corresponding to a partial coding sequence of cobalt and iron NHase genes, respectively. Using the PCR method, both types of iron- and cobalt-NHase-encoding genes were detected in DNA from pure cultures and soil samples. Furthermore consensus primers allowed rapid cloning and expression of novel NHases in Escherichia coli.     

Quantification of the carbazole 1,9a-dioxygenase gene by real-time competitive PCR combined with co-extraction of internal standards

The fluorogenic probe assay, competitive polymerase chain reaction (PCR) and co-extraction with internal standard cells were combined to develop a rapid, sensitive, and accurate quantification method for the copy number of a target carbazole 1,9a-dioxygenase gene (carAa) and the cell number of Pseudomonas sp. strain CA10. The internal standard DNA was modified by replacement of a 20-bp long region with one for binding a specific probe in fluorogenic PCR (TaqMan). The resultant DNA fragment was similar to the corresponding region of the intact carAa gene in terms of G+C content. When used as a competitor in the PCR reaction, the internal standard DNA was distinguishable from the target carAa gene by two specific fluorogenic probes with different fluorescence labels, and was automatically detected in a single tube using the ABI7700 sequence detection system. To minimize variations in the efficiency of cell lysis and DNA extraction between the samples, the co-extraction method was combined. A mini-transposon was used to introduce competitor DNA into the genome of other pseudomonads, and the resultant construct was used as the standard cell. After the addition of a fixed amount of the internal standard cells to soil samples, total DNA was extracted (co-extraction). Using this method, the copy number of the carAa gene and the cell number of strain CA10 in soil samples could be quantified rapidly.     

Detection of catabolic genes in indigenous microbial consortia isolated from a diesel-contaminated soil

Bioremediation is often used for in situ remediation of petroleum-contaminated sites. The primary focus of this study was on understanding the indigenous microbial community which can survive in contaminated environment and is responsible for the degradation. Diesel. toluene and naphthalene-degrading microbial consortia were isolated from diesel-contaminated soil by growing on selective hydrocarbon substrates. The presence and frequency of the catabolic genes responsible for aromatic hydrocarbon biodegradation (xylE, ndoB) within the isolated consortia were screened using polymerase chain reaction PCR and DNA DNA colony hybridization. The diesel DNA-extract possessed both the xy/E catabolic gene for toluene, and the nah catabolic gene for polynuclear aromatic hydrocarbon degradation. The toluene DNA-extract possessed only the xylE catabolic gene, while the naphthalene DNA-extract only the ndoB gene. Restriction enzyme analysis with HaeIII indicated similar restriction patterns for the xylE gene fragment between toluene DNA-extract and a type strain, Pseudomonas putida ATCC 23973. A substantial proportion (74%) of the colonies from the diesel-consortium possessed the xylE gene, and the ndoB gene (78%), while a minority (29%) of the toluene-consortium harbored the xylE gene. 59% of the colonies from the naphthalene-consortium had the ndoB gene, and did not have the xylE gene. These results indicate that the microbial population has been naturally enriched in organisms carrying genes for aromatic hydrocarbon degradation and that significant aromatic biodegradative potential exists at the site. Characterization of the population genotype constitutes a molecular diagnosis which permits the determination of the catabolic potential of the site to degrade the contaminant present.     

Phenotypic expression of PCR-generated random mutations in a Pseudomonas putida gene after its introduction into an Acinetobacter chromosome by natural transformation

Localized sets of random point mutations generated by PCR amplification can be transferred efficiently to the chromosome of Acinetobacter ADP1 (also known as strain BD413) by natural transformation. The technique does not require cloning of PCR fragments in plasmids: PCR-amplified DNA fragments are internalized by cells and directly incorporated into their genomes by homologous recombination. Previously such procedures for random mutagenesis could be applied only to Acinetobacter genes affording the selection of mutant phenotypes. Here we describe the construction of a vector and recipient that allow for mutagenesis, recovery, and expression of heterologous genes that may lack a positive selection. The plasmid carries an Acinetobacter chromosomal segment interrupted by a multiple cloning site next to a kanamycin resistance marker. The insertion of heterologous DNA into the multiple cloning site prepares the insert as a target for PCR mutagenesis. PCR amplifies the kanamycin resistance marker and a flanking region of Acinetobacter DNA along with the insert of heterologous DNA. Nucleotide sequence identity between the flanking regions and corresponding chromosomal segments in an engineered Acinetobacter recipient allows homologous recombination of the PCR-amplified DNA fragments into a specific chromosomal docking site from which they can be expressed. The recipient strain contains only a portion of the kanamycin resistance gene, so donor DNA containing both this gene and the mutagenized insert can be selected by demanding growth of recombinants in the presence of kanamycin. The effectiveness of the technique was demonstrated with the relatively GC-rich Pseudomonas putida xylE gene. After only one round of PCR amplification (35 cycles), donor DNA produced transformants of which up to 30% carried a defective xylE gene after growth at 37 degrees C. Of recombinant clones that failed to express xylE at 37 degrees C, about 10% expressed the gene when grown at 22 degrees C. The techniques described here could be adapted to prepare colonies with an altered function in any gene for which either a selection or a suitable phenotypic screen exists.     

副溶血弧菌EMA-PCR检测技术的建立

PCR技术被广泛应用于副溶血弧菌的检测中, 但传统的PCR技术无法区分样品中的死细菌与活细菌, 往往使检测结果出现较高的假阳性。因此, 将叠氮溴乙锭(Ethidium monoazide bromide, EMA)与PCR技术结合, 建立一种快速、准确的副溶血弧菌检测方法。以dnaJ基因为检测副溶血弧菌的靶基因, 分别用副溶血弧菌的纯培养细胞及其基因组DNA作模板进行PCR检测, 灵敏度分别为2.5×104 CFU/mL和6×102 fg/μL。在检测样品前处理过程中加入EMA, 当EMA的浓度小于5 mg/L时, EMA对活菌靶基因的扩增没有明显的抑制; 而终浓度为2 mg/L的EMA, 能有效抑制1×108 CFU/mL副溶血弧菌死菌的扩增。活菌和死菌混合体系的PCR结果表明, EMA-PCR能有效降低副溶血弧菌检测过程中的假阳性。     

Streptomyces marker plasmids for monitoring survival and spread of streptomycetes in soil.

Plasmid constructs pNW1 through pNW6 containing a controllable xylE gene (for catechol 2,3-dioxygenase) were introduced into Streptomyces lividans strains to provide a selectable marker system. xylE functions in S. lividans under the control of bacteriophage lambda promoters lambda pL and lambda pR. Thermoregulated expression of xylE is provided through the lambda repressor cI857. Catechol 2,3-dioxygenase activity was increased 2.8-fold from plasmid construct pNW2 (lambda pL, xylE, cI857) and 9.5- and 7.4-fold from constructs pNW3 (lambda pR, xylE, cI857) and pNW5 (lambda pR, xylE, cI857), respectively, when the temperature was shifted from 28 degrees C to 37 degrees C. The stability of the constructs varied from 4.7% for pNW2 to 99.4% for pNW4 (lambda pL, xylE) over two rounds of sporulation. Marked S. lividans strains released into soil systems retained the XylE phenotype for more than 80 days, depending on the marker plasmid, when examined by a selective plating method. Furthermore, S. lividans harboring plasmid pNW5 was detectable by nucleic acid hybridization at less than 10 CFU g-1 (dry weight) of soil as mycelium and 10(3) CFU g-1 (dry weight) of soil as spores with the xylE marker DNA extracted from soil and amplified by using the polymerase chain reaction.