Analysis of allosteric signal transduction mechanisms in an engineered fluorescent maltose biosensor

We previously reported the construction of a family of reagentless fluorescent biosensor proteins by the structure-based design of conjugation sites for a single, environmentally sensitive small molecule dye, thus providing a mechanism for the transduction of ligand-induced conformational changes into a macroscopic fluorescence observable. Here we investigate the microscopic mechanisms that may be responsible for the macroscopic fluorescent changes in such Fluorescent Allosteric Signal Transduction (FAST) proteins. As case studies, we selected three individual cysteine mutations (F92C, D95C, and S233C) of Escherichia coli maltose binding protein (MBP) covalently labeled with a single small molecule fluorescent probe, N-((2-iodoacetoxy)ethyl)-N-methyl)amino-7-nitrobenz-2-oxa-1,3-diazole (NBD), each giving rise to a robust FAST protein with a distinct maltose-dependent fluorescence response. The fluorescence emission intensity, anisotropy, lifetime, and iodide-dependent fluorescence quenching were determined for each conjugate in the presence and absence of maltose. Structure-derived solvent accessible surface areas of the three FAST proteins are consistent with experimentally observed quenching data. The D95C protein exhibits the largest fluorescence change upon maltose binding. This mutant was selected for further characterization, and residues surrounding the fluorophore coupling site were mutagenized. Analysis of the resulting mutant FAST proteins suggests that specific hydrogen-bonding interactions between the fluorophore molecule and two tyrosine side-chains, Tyr171 and Tyr176, in the open state but not the closed, are responsible for the dramatic fluorescence response of this construct. Taken together these results provide insights that can be used in future design cycles to construct fluorescent biosensors that optimize signaling by engineering specific hydrogen bonds between a fluorophore and protein.     

The interplay between effector binding and allostery in an engineered protein switch

The protein design rules for engineering allosteric regulation are not well understood. A fundamental understanding of the determinants of ligand binding in an allosteric context could facilitate the design and construction of versatile protein switches and biosensors. Here, we conducted extensive in vitro and in vivo characterization of the effects of 285 unique point mutations at 15 residues in the maltose‐binding pocket of the maltose‐activated β‐lactamase MBP317‐347. MBP317‐347 is an allosteric enzyme formed by the insertion of TEM‐1 β‐lactamase into the E. coli maltose binding protein (MBP). We find that the maltose‐dependent resistance to ampicillin conferred to the cells by the MBP317‐347 switch gene (the switch phenotype) is very robust to mutations, with most mutations slightly improving the switch phenotype. We identified 15 mutations that improved switch performance from twofold to 22‐fold, primarily by decreasing the catalytic activity in the absence of maltose, perhaps by disrupting interactions that cause a small fraction of MBP in solution to exist in a partially closed state in the absence of maltose. Other notable mutations include K15D and K15H that increased maltose affinity 30‐fold and Y155K and Y155R that compromised switching by diminishing the ability of maltose to increase catalytic activity. The data also provided insights into normal MBP physiology, as select mutations at D14, W62, and F156 retained high maltose affinity but abolished the switch's ability to substitute for MBP in the transport of maltose into the cell. The results reveal the complex relationship between ligand binding and allostery in this engineered switch.     

Mining the Sinorhizobium meliloti Transportome to Develop FRET Biosensors for Sugars,Dicarboxylates and Cyclic Polyols

Background

Förster resonance energy transfer (FRET) biosensors are powerful tools to detect biologically important ligands in real time. Currently FRET bisosensors are available for twenty-two compounds distributed in eight classes of chemicals (two pentoses, two hexoses, two disaccharides, four amino acids, one nucleobase, two nucleotides, six ions and three phytoestrogens). To expand the number of available FRET biosensors we used the induction profile of the Sinorhizobium meliloti transportome to systematically screen for new FRET biosensors.

Methodology/Principal Findings

Two new vectors were developed for cloning genes for solute-binding proteins (SBPs) between those encoding FRET partner fluorescent proteins. In addition to a vector with the widely used cyan and yellow fluorescent protein FRET partners, we developed a vector using orange (mOrange2) and red fluorescent protein (mKate2) FRET partners. From the sixty-nine SBPs tested, seven gave a detectable FRET signal change on binding substrate, resulting in biosensors for D-quinic acid, myo-inositol, L-rhamnose, L-fucose, β-diglucosides (cellobiose and gentiobiose), D-galactose and C4-dicarboxylates (malate, succinate, oxaloacetate and fumarate). To our knowledge, we describe the first two FRET biosensor constructs based on SBPs from Tripartite ATP-independent periplasmic (TRAP) transport systems.

Conclusions/Significance

FRET based on orange (mOrange2) and red fluorescent protein (mKate2) partners allows the use of longer wavelength light, enabling deeper penetration of samples at lower energy and increased resolution with reduced back-ground auto-fluorescence. The FRET biosensors described in this paper for four new classes of compounds; (i) cyclic polyols, (ii) L-deoxy sugars, (iii) β-linked disaccharides and (iv) C4-dicarboxylates could be developed to study metabolism in vivo.     

Computational design and biochemical characterization of maize nonspecific lipid transfer protein variants for biosensor applications

Lipid transfer proteins (LTPs) are a family of proteins that bind and transfer lipids. Utilizing the maize LTP, we have successfully engineered fluorescent reagentless biosensors for the natural ligand of LTPs; this was achieved by using computational protein design to remove a disulfide bridge and attaching a thio-reactive fluorophore. Conformational change induced by ligand titration is thought to affect the fluorescence of the fluorophore, allowing detection of ligand binding. Fluorescence measurements show that our LTP variants have affinity to palmitate that is consistent with wild-type LTP. These molecules have the potential to be utilized as scaffolds to design hydrophobic ligand biosensors or to serve as drug carriers.     

Monitoring of conformational change in maltose binding protein using split green fluorescent protein

In this study, we describe a novel method for the detection of conformational changes in proteins, which is predicated on the reconstitution of split green fluorescent protein (GFP). We employed fluorescence complementation assays for the monitoring of the conformationally altered proteins. In particular, we used maltose binding protein (MBP) as a model protein, as MBP undergoes a characteristic hinge-twist movement upon substrate binding. The common feature of this approach is that GFP, as a reporter protein, splits into two non-fluorescent fragments, which are genetically fused to the N- and C-termini of MBP. Upon binding to maltose, the chromophores move closer together, resulting in the generation of fluorescence. This split GFP method also involves the reconstitution of GFP, which is determined via observations of the degree to which fluorescence intensity is restored. As a result, reconstituted GFP has been observed to generate fluorescence upon maltose binding in vitro, thereby allowing for the direct detection of changes in fluorescence intensity in response to maltose, in a concentration- and time-dependent fashion. Our findings showed that the fluorescence complementation assay can be used to monitor the conformational alterations of a target protein, and this ability may prove useful in a number of scientific and medical applications.     

An Engineered Palette of Metal Ion Quenchable Fluorescent Proteins

Many fluorescent proteins have been created to act as genetically encoded biosensors. With these sensors, changes in fluorescence report on chemical states in living cells. Transition metal ions such as copper, nickel, and zinc are crucial in many physiological and pathophysiological pathways. Here, we engineered a spectral series of optimized transition metal ion-binding fluorescent proteins that respond to metals with large changes in fluorescence intensity. These proteins can act as metal biosensors or imaging probes whose fluorescence can be tuned by metals. Each protein is uniquely modulated by four different metals (Cu²⁺, Ni²⁺, Co²⁺, and Zn²⁺). Crystallography revealed the geometry and location of metal binding to the engineered sites. When attached to the extracellular terminal of a membrane protein VAMP2, dimeric pairs of the sensors could be used in cells as ratiometric probes for transition metal ions. Thus, these engineered fluorescent proteins act as sensitive transition metal ion-responsive genetically encoded probes that span the visible spectrum.     

Synthesis of thiol-reactive, long-wavelength fluorescent phenoxazine derivatives for biosensor applications

Two environmentally sensitive, long-wavelength fluorescent phenoxazine derivatives, INR and IANR, were synthesized with linkers for conjugation to the thiol group of cysteine in binding proteins. The linkers were designed based on the attachment sites at two different positions on the phenoxazine, which were chosen in order to study the orientation of the dye with respect to the binding protein. Conjugation of the dyes to the S337C maltose binding protein (MBP) mutant provided conjugates of these dyes that are capable of detecting maltose with different sensitivities. The dye INR gave a 3-fold (+200%) change in fluorescence intensity upon maltose binding when conjugated to S337C MBP with a binding constant (K(d)) of 435 microM. The fluorescence change for IANR was only 20% and the K(d) was 1.4 mM. Conformational analysis of the dyes by molecular modeling suggested that the linker in IANR imparted greater conformational freedom to the dye, resulting in little change in environment between the open and the closed-form conformations. The linker in INR, on the other hand, showed restricted motion, which placed the dye in different environments in the open and closed forms of the protein. Thus, design and placement of the linker play a critical role in the performance of these dyes as environmentally sensitive probes.     

Recent Advances in GFP Folding Reporter and Split-GFP Solubility Reporter Technologies. Application to Improving the Folding and Solubility of Recalcitrant Proteins from Mycobacterium tuberculosis

We have improved our green fluorescent protein (GFP) folding reporter technology [Waldo et al., (1999) Nat. Biotechnol. 17, 691–695] to evolve recalcitrant proteins from Mycobacterium tuberculosis. The target protein is inserted into the scaffolding of the GFP, eliminating false-positive artifacts caused by expression of truncated protein variants from internal cryptic ribosome binding sites in the target RNA. In parallel, we have developed a new quantitative fluorescent protein tagging and detection system based on micro-domains of GFP. This split-GFP system, which works both in vivo and in vitro, is amenable to high-throughput assays of protein expression and solubility [Cabantous et al., (2005) Nat. Biotechnol. 23, 102–107]. Together, the GFP folding reporter and split-GFP technologies offer a comprehensive system for manipulating and improving protein folding and solubility.     

Creation of Circularly Permutated Yellow Fluorescent Proteins Using Fluorescence Screening and a Tandem Fusion Template

By experimenting with many different circularly permutated yellow fluorescent protein (cpYFP) variants as acceptors in fluorescence resonance energy transfer based biosensors, the optimal dynamic range can be discovered by sampling the possibilities of relative fluorophore orientations before and after bioactivity. Hence, to facilitate the sampling process, we introduced a new approach to construct a library of cpYFP variants using fluorescence screening and a tandem fusion template. This new approach is rapid because it does not require creating intermediate N- and C-terminal fragments and it allows quick screening for positive colonies by fluorescence. As a demonstration, eleven cpYFP variants were created and eight showed fluorescence. The emission and excitation spectra of these cpYFP variants showed strong similarity to YFP and therefore can be used in replacement. Revisions requested 27 October 2005; Revisions received 23 December 2005     

Extracellular production and affinity purification of recombinant proteins with Escherichia coli using the versatility of the maltose binding protein

Recombinant proteins are essential products of today's industrial biotechnology. In this study we address two crucial factors in recombinant protein production: (i) product accessibility and (ii) product recovery. Escherichia coli, one of the most frequently used hosts for recombinant protein expression, does not inherently secrete proteins into the extracellular environment. The major drawback of this expression system is, therefore, to be found in the intracellular protein accumulation and hampered product accessibility. We have constructed a set of expression vectors in order to facilitate extracellular protein production and purification. The maltose binding protein from E. coli is used as fusion partner for several proteins of interest allowing an export to the bacteria's periplasm via both the Sec and the Tat pathway. Upon coexpression of a modified Cloacin DF13 bacteriocin release protein, the hybrid proteins are released into the culture medium. This essentially applies to a distinguished reporter molecule, the green fluorescent protein, for which an extracellular production was not reported so far. The sequestered proteins can be purified to approximate homogeneity by a simple, rapid and cheap procedure which utilizes the affinity of the maltose binding protein to α-1,4-glucans.     

Circularly permuted monomeric red fluorescent proteins with new termini in the ��-sheet

Circularly permuted fluorescent proteins (FPs) have a growing number of uses in live cell fluorescence biosensing applications. Most notably, they enable the construction of single fluorescent protein‐based biosensors for Ca²⁺ and other analytes of interest. Circularly permuted FPs are also of great utility in the optimization of fluorescence resonance energy transfer (FRET)‐based biosensors by providing a means for varying the critical dipole–dipole orientation. We have previously reported on our efforts to create circularly permuted variants of a monomeric red FP (RFP) known as mCherry. In our previous work, we had identified six distinct locations within mCherry that tolerated the insertion of a short peptide sequence. Creation of circularly permuted variants with new termini at the locations corresponding to the sites of insertion led to the discovery of three permuted variants that retained no more than 18% of the brightness of mCherry. We now report the extensive directed evolution of the variant with new termini at position 193 of the protein sequence for improved fluorescent brightness. The resulting variant, known as cp193g7, has 61% of the intrinsic brightness of mCherry and was found to be highly tolerant of circular permutation at other locations within the sequence. We have exploited this property to engineer an expanded series of circularly permuted variants with new termini located along the length of the 10th β‐strand of mCherry. These new variants may ultimately prove useful for the creation of single FP‐based Ca²⁺ biosensors.     

Engineering green fluorescent protein as a dual functional tag

A hexa-histidine (6 x His) sequence was inserted into a surface loop of the green fluorescent protein (GFP) to develop a dual functional GFP useful for both monitoring and purification of recombinant proteins. Two variants (GFP172 and GFP157), differentiated by the site of insertion of the 6xHis sequence, were developed and compared with a control variant (GFPHis) having the 6xHis sequence at its C-terminus. The variants were produced in Escherichia coli and purified using immobilized metal affinity chromatography (IMAC). The purification efficiencies by IMAC for all variants were found to be comparable. Purified GFP172 and GFP157 variants retained approximately 60% of the fluorescence compared to that of GFPHis. The reduction in the fluorescence intensity associated with GFP172 and GFP157 was attributed to the lower percentage of fluorescent GFP molecules in these variants. Nonetheless, the rates of fluorescence acquisition were found to be similar for all functional variants. Protein misfolding at an elevated temperature (37 degrees C) was found to be less profound for GFP172 than for GFP157. The dual functional properties of GFP172 were tested with maltose binding protein (MBP) as the fusion partner. The MBP-GFP172 fusion protein remained fluorescent and was purified from E. coli lysate as well as from spiked tobacco leaf extracts in a single-step IMAC. For the latter, a recovery yield of approximately 75% was achieved and MBP-GFP172 was found to coelute with a degraded product of the fusion protein at a ratio of about 4:1. The primary advantage of the chimeric GFP tag having an internal hexa-histidine sequence is that such a tag allows maximum flexibility for protein or peptide fusions since both N- and C-terminal ends of the GFP are available for fusion.     

探索大肠杆菌细胞膜合成过程中脂肪酸的掺入模式

【目的】探索大肠杆菌生长分裂过程中,脂肪酸作为底物在细胞膜合成过程中的掺入模式。【方法】本研究解析了以乙酰CoA为底物,合成中间产物长链脂酰-ACP,随后合成磷脂酰乙醇胺(phosphatidylethanolamine,PE)的途径,并将合成途径中的10个关键酶与绿色荧光蛋白(enhanced green fluorescent protein,EGFP)或红色荧光蛋白(monmer Cherry,mCherry)进行融合,在大肠杆菌内表达这些融合蛋白,用激光共聚焦荧光显微镜成像的方式来获得这些融合蛋白的定位信息。【结果】宽场荧光显微镜成像结果显示,磷脂酰乙醇胺合成途径中的10个酶在不同表达水平下出现不同的定位模式。在大肠杆菌中高水平表达融合蛋白EGFP-FabA、EGFP-FabB、EGFP-FabI、EGFP-FabG、EGFP-PlsB和EGFP-PssA时,细胞两极和中部有大量蛋白聚集的现象。EGFP-FabD、EGFP-FabF、EGFP-CdsA、EGFP-PSD在不同表达水平下,均匀分散在细胞质或细胞膜上。缩时影像(Time-lapse)结果显示,合成途径中的一个关键蛋白EGFP-Pls B在细胞分裂前随着细胞膜的内陷聚集到细胞隔膜,随着细胞分裂,母细胞的隔膜成为新细胞的两极。【结论】本研究通过获取磷脂酰乙醇胺合成相关蛋白酶在大肠杆菌中的定位结果,推测脂肪酸分子是在细胞分裂隔膜和两极掺入,被催化合成PE后被运送到细胞膜其他位置。     

Optimized production and analysis of the staphylococcal multidrug efflux protein QacA

The plasmid-encoded QacA multidrug transport protein confers high-level resistance to a range of commonly used antimicrobials and is carried by widespread clinical strains of the human pathogen Staphylococcus aureus making it a potential target for future drug therapies. In order to obtain a sufficient yield of QacA protein for structural and biophysical studies, an optimized strategy for QacA overexpression was developed. QacA expression, directed from several vector systems in Escherichia coli, was tested under various growth and induction conditions and a synthetic qacA gene, codon-optimized for expression in E. coli was developed. Despite the extreme hydrophobicity and potential toxicity of the QacA secondary transport protein, a strategy based on the pBAD expression system, yielding up to four milligrams of approximately 95% pure QacA protein per litre of liquid culture, was devised. Purified QacA protein was examined using circular dichroism spectroscopy and displayed a secondary structure akin to that predicted from in silico analyses. Additionally, detergent solubilized QacA protein was shown to bind its fluorescent substrate rhodamine 6G with micro-molar affinity using a fluorescence polarization-based binding assay, similar to other multidrug transport proteins. To check the applicability of the expression/purification system described for QacA to other staphylococcal secondary transporters, the gene encoding the TetA(K) tetracycline efflux protein, which was previously recalcitrant to overexpression, was incorporated into the pBAD-based system and shown to be readily produced at easily detectable levels. Therefore, this expression system could be of general use for the production of secondary transport proteins in E. coli.     

Identification of GFP-like Proteins in Nonbioluminescent,Azooxanthellate Anthozoa Opens New Perspectives for Bioprospecting

We screened nonbioluminescent, azooxanthellate cnidaria as potential sources for advanced marker proteins and succeeded in cloning a tetrameric green fluorescent protein (GFP) from the tentacles of Cerianthus membranaceus. The fluorescence of this protein (cmFP512) is characterized by excitation maximum at 503 nm, emission maximum at 512 nm, extinction coefficient of 58,800 M^–1 cm^–1, quantum yield of 0.66, and fluorescence lifetime of 2.4 ns. The chromophore is formed from the tripeptide Gln-Tyr-Gly. The amino acid sequence of this protein shares 17.8% identical residues with GFP from Aequorea victoria. Weak interactions between the subunits of the tetramer make cmFP512 a promising lead structure for the generation of monomeric variants of fluorescent proteins. Both red fluorescent proteins and nonfluorescent proteins of the GFP family were also purified from tissue homogenates of Adamsia palliata and Calliactis parasitica. The results presented here indicate that a photoprotective function of GFP-like proteins is unlikely in the examined anthozoa species.     

Isolation of 3-(4,8,12-Trimethyltridecyl)-furan (“Phytofuran”) from Burley Tobacco

Sendai virus (SeV) is an enveloped virus with a non-segmented negative-strand RNA genome. SeV envelope fusion (F) glycoproteins play crucial roles in the viral life cycle in processes such as viral binding, assembly, and budding. In this study, we developed a viable recombinant SeV designated F-EGFP SeV/ΔF, in which the F protein was replaced by an F protein fused to EGFP at the carboxyl terminus. Living infected cells of the recombinant virus were directly visualized by green fluorescence. The addition of EGFP to the F protein maintained the activities of the F protein in terms of intracellular transport to the plasma membrane via the ER and the Golgi apparatus and fusion activity in the infected cells. These results suggest that this fluorescent SeV is a useful tool for studying the viral binding, assembly, and budding mechanisms of F proteins and the SeV life cycle in living infected cells.     

Design and Application of Highly Responsive Fluorescence Resonance Energy Transfer Biosensors for Detection of Sugar in Living Saccharomyces cerevisiae Cells

A protein sensor with a highly responsive fluorescence resonance energy transfer (FRET) signal for sensing sugars in living Saccharomyces cerevisiae cells was developed by combinatorial engineering of the domain linker and the binding protein moiety. Although FRET sensors based on microbial binding proteins have previously been created for visualizing various sugars in vivo, such sensors are limited due to a weak signal intensity and a narrow dynamic range. In the present study, the length and composition of the linker moiety of a FRET-based sensor consisting of CFP-linker₁-maltose-binding protein-linker₂-YFP were redesigned, which resulted in a 10-fold-higher signal intensity. Molecular modeling of the composite linker moieties, including the connecting peptide and terminal regions of the flanking proteins, suggested that an ordered helical structure was preferable for tighter coupling of the conformational change of the binding proteins to the FRET response. When the binding site residue Trp62 of the maltose-binding protein was diversified by saturation mutagenesis, the Leu mutant exhibited an increased binding constant (82 μM) accompanied by further improvement in the signal intensity. Finally, the maltose sensor with optimized linkers was redesigned to create a sugar sensor with a new specificity and a wide dynamic range. When the optimized maltose sensors were employed as in vivo sensors, highly responsive FRET images were generated from real-time analysis of maltose uptake of Saccharomyces cerevisiae (baker's yeast).     

A genetically encoded, high-signal-to-noise maltose sensor

We describe the generation of a family of high-signal-to-noise single-wavelength genetically encoded indicators for maltose. This was achieved by insertion of circularly permuted fluorescent proteins into a bacterial periplasmic binding protein (PBP), Escherichia coli maltodextrin-binding protein, resulting in a four-color family of maltose indicators. The sensors were iteratively optimized to have sufficient brightness and maltose-dependent fluorescence increases for imaging, under both one- and two-photon illumination. We demonstrate that maltose affinity of the sensors can be tuned in a fashion largely independent of the fluorescent readout mechanism. Using literature mutations, the binding specificity could be altered to moderate sucrose preference, but with a significant loss of affinity. We use the soluble sensors in individual E. coli bacteria to observe rapid maltose transport across the plasma membrane, and membrane fusion versions of the sensors on mammalian cells to visualize the addition of maltose to extracellular media. The PBP superfamily includes scaffolds specific for a number of analytes whose visualization would be critical to the reverse engineering of complex systems such as neural networks, biosynthetic pathways, and signal transduction cascades. We expect the methodology outlined here to be useful in the development of indicators for many such analytes.     

结核分枝杆菌Rv3194c蛋白的亚细胞定位

【目的】Rv3194c基因编码的是结核分枝杆菌的PDZ信号蛋白,本研究探讨该蛋白的亚细胞定位,为其细胞结合蛋白的筛选奠定基础。【方法】从H37Rv基因组中扩增出编码只含有PDZ结构域的tRv3194c (Rv3194c 1–234 aa)的基因片段,在3′端加T2A和EGFP序列,一并插入真核表达载体构建出pcDNA3.1-tRv3194c-T2A-EGFP。将构建好的质粒瞬时转染L929细胞,并共感染重组痘苗病毒vTF7-3,用间接免疫荧光、流式细胞分选以及Western blotting检测融合蛋白的表达以及亚细胞定位。【结果】成功构建出真核表达载体pcDNA3.1-tRv3194c-T2A-EGFP,瞬时转染L929细胞后融合蛋白tRv3194c定位于线粒体膜上,且重组痘苗病毒vTF7-3的感染有助于靶蛋白表达水平的提高。【结论】Rv3194蛋白的PDZ结构域与线粒体外膜相关蛋白结合,为了解该蛋白在细胞内的致病机制提供重要线索。     

C－反应蛋白与模型受体的特异性结合

Ｃ－反应蛋白是动物体内一种典型的急性期反应蛋白。本文人工合成了两种可以与Ｃ－反应蛋白特异性结合的兼性分子作为Ｃ－反应蛋白的模型受体,以便进一步在脂单层膜表面上组装Ｃ－反应蛋白的二维晶体。作为第一步工作,本文研究了兼性分子的特性以及荧光光谱方法监测兼性分子与Ｃ－反应蛋白之间特异性相互作用。荧光光谱实验结果表明受体与Ｃ－反应的特异结合会引起荧光强度的下降。