Stable propagation of cosmid sized human DNA inserts in an F factor based vector.

Instability of complex mammalian genomic DNA inserts is commonplace in cosmid libraries constructed in conventional multicopy vectors. To develop a means to construct stable libraries, we have developed a low copy number cosmid vector based on the E. coli F factor replicon (Fosmid). We have tested relative stability of human DNA inserts in Fosmids and in two conventional multicopy vectors (Lawrist 16 and Supercos) by comparing the frequency of changes in restriction patterns of the inserts after propagating randomly picked human genomic clones based on these vectors. We found that the clones based on Fosmid vector undergo detectable changes at a greatly reduced frequency. We also observed that sequences that undergo drastic rearrangements and deletions during propagation in a conventional vector were stably propagated when recloned as Fosmids. The results indicate that Fosmid system may be useful for constructing stable libraries from complex genomes.     

Boundaries of the Origin of Replication: Creation of a pET-28a-Derived Vector with p15A Copy Control Allowing Compatible Coexistence with pET Vectors

During our studies involving protein-DNA interactions, we constructed plasmid pSAM to fulfill two requirements: 1) to facilitate transfer of cloned sequences from widely used expression vector pET-28a(+), and 2) to provide a vector compatible with pBR322-derived plasmids for use in cells harboring two different plasmids. Vector pSAM is a pET-28a(+)-derived plasmid with the p15A origin of replication (ori); pET-28a(+) contains the pBR322 replicon that is incompatible with other pBR322-derived plasmids. By replacing the original pET-28a(+) replicon–comprising the ori, RNAI, RNAII, and Rom–with the p15A replicon, we generated pSAM, which contains the pET-28a(+) multiple cloning site and is now compatible with pBR322-derived vectors. Plasmid copy number was assessed using quantitative PCR: pSAM copy number was maintained at 18±4 copies per cell, consistent with that of other p15A-type vectors. Compatibility with pBR322-derived vectors was tested with pGEX-6p-1 and pSAM, which maintained their copy numbers of 49±10 and 14±4, respectively, when both were present within the same cell. Swapping of the ori is a common practice; however, it is vital that all regions of the original replicon be removed. Additional vector pSAMRNAI illustrated that incompatibility remains when portions of the replicon, such as RNAI and/or Rom, are retained; pSAMRNAI, which contains the intact RNAI but not ROM, lowered the copy number of pGEX-6p-1 to 18±2 in doubly transformed cells due to retention of the pET-28a(+)-derived RNAI. Thus, pSAMRNAI is incompatible with vectors controlled by the pBR322 replicon and further demonstrates the need to remove all portions of the original replicon and to quantitatively assess copy number, both individually and in combination, to ensure vector compatibility. To our knowledge, this is the first instance where the nascent vector has been quantitatively assessed for both plasmid copy number and compatibility. New vector pSAM provides ease of transferring sequences from commonly used pET-28a(+) into a vector compatible with the pBR322 family of plasmids. This essential need is currently not filled.     

A vector system with temperature-sensitive replication for gene disruption and mutational cloning in streptomycetes

Summary Replication of the Streptomyces ghanaensis plasmid pSG5 was shown to be temperature sensitive. The pSG5 replicon is stably inherited at temperatures below 34° C, but is lost at incubation temperatures above this. A family of cloning vectors was constructed using the pSG5 minimal replicon and different marker genes. The vectors obtained are small in size, have an intermediate copy number, possess a broad host range and are compatible with some other streptomycete vector systems. By increasing the incubation temperature, these vectors can be eliminated from their host cells very efficiently. The suitability of the pSG5 vector family for mutating chromosomal genes by gene disruption was demonstrated: pBN10, a pSG5 derivative containing an internal fragment of the phosphinothricyl-alanyl-alanine (PTT) resistance gene pat, was integrated into the chromosomal pat gene of the PTT-producer Streptomyces viridochromogenes thus inactivating PTT resistance. The integrated pBN10 plasmid was rescued from the chromosome, together with an adjacent fragment carrying DNA of the PTT biosynthetic cluster.     

A spontaneous runaway vector for production-scale expression of bovine somatotropin from Escherichia coli

An Escherichia coli expression vector was constructed for the production-scale fermentation of recombinant bovine somatotropin (rBST). Gene expression is regulated by a spontaneous increase in copy number at a constant low temperature without the need for an external inducer. This vector, designated pURA-4, contains the ampicillin resistance gene, the replication origin from pBR322, the R1 temperature-inducible runaway replicon, and a gene encoding rBST. Optimized rBST expression levels of >35% total cell protein were achieved at a constant 28 degrees C. Shake-flask analysis of pURA-4 shows that the copy number spontaneously increases approximately 6-fold during rBST production. Investigation into the mechanism of pURA-4 spontaneous runaway shows that the increase in copy number is directed by the pBR322 ori and not by the R1 replicon. Although the R1 temperature-inducible replicon does not mediate spontaneous runaway, it does have a positive effect on rBST expression. Copy number analysis also confirmed the stability of pURA-4 spontaneous runaway from the shake-flask scale through the production scale.     

Enhanced production of single copy backbone-free transgenic plants in multiple crop species using binary vectors with a pRi replication origin in <Emphasis Type="Italic">Agrobacterium tumefaciens</Emphasis>

Single transgene copy, vector backbone-free transgenic crop plants are highly desired for functional genomics and many biotechnological applications. We demonstrate that binary vectors that use a replication origin derived from the Ri plasmid of Agrobacterium rhizogenes (oriRi) increase the frequency of single copy, backbone-free transgenic plants in Agrobacterium tumefaciens mediated transformation of soybean, canola, and corn, compared to RK2-derived binary vectors (RK2 oriV). In large scale soybean transformation experiments, the frequency of single copy, backbone-free transgenic plants was nearly doubled in two versions of the oriRi vectors compared to the RK2 oriV control vector. In canola transformation experiments, the oriRi vector produced more single copy, backbone-free transgenic plants than did the RK2 oriV vector. In corn transformation experiments, the frequency of single copy backbone-free transgenic plants was also significantly increased when using the oriRi vector, although the transformation frequency dropped. These results, derived from transformation experiments using three crops, indicate the advantage of oriRi vectors over RK2 oriV binary vectors for the production of single copy, backbone-free transgenic plants using Agrobacterium-mediated transformation.     

Transformation ofLactobacillus reuteri with electroporation: Studies on the erythromycin resistance plasmid pLUL631

A high-frequency transformation system was developed forLactobacillus reuteri with the electroporation technique. With this method, transformation frequencies of 10⁷ transformants per g DNA were routinely obtained with the plasmid pLUL631 and its derivatives. pLUL631, a nativeL. reuteri plasmid containing an erythromycin resistance determinant, was studied mainly with regard to replicon size and stability. The minimal replicon of the plasmid was shown to be located on a 2.4–3.1 kilobase pair fragment. pLUL631 was stably maintained in severalL. reuteri strains, but a deletion derivative, pLUL634, was unstable during growth under nonselective conditions. A hybrid plasmid, pLUL200, derived from the broad-host-range plasmid pVS1 and a part of the pLUL631 replicon, was shown to have higher copy number than both pLUL631 and pLUL634. The replicon of pLUL631 is suggested to be a suitable part of a food grade vector forL. reuteri.     

Diploidization and genome size change in allopolyploids is associated with differential dynamics of low‐ and high‐copy sequences

Recent advances have highlighted the ubiquity of whole‐genome duplication (polyploidy) in angiosperms, although subsequent genome size change and diploidization (returning to a diploid‐like condition) are poorly understood. An excellent system to assess these processes is provided by Nicotiana section Repandae, which arose via allopolyploidy (approximately 5 million years ago) involving relatives of Nicotiana sylvestris and Nicotiana obtusifolia. Subsequent speciation in Repandae has resulted in allotetraploids with divergent genome sizes, including Nicotiana repanda and Nicotiana nudicaulis studied here, which have an estimated 23.6% genome expansion and 19.2% genome contraction from the early polyploid, respectively. Graph‐based clustering of next‐generation sequence data enabled assessment of the global genome composition of these allotetraploids and their diploid progenitors. Unexpectedly, in both allotetraploids, over 85% of sequence clusters (repetitive DNA families) had a lower abundance than predicted from their diploid relatives; a trend seen particularly in low‐copy repeats. The loss of high‐copy sequences predominantly accounts for the genome downsizing in N. nudicaulis. In contrast, N. repanda shows expansion of clusters already inherited in high copy number (mostly chromovirus‐like Ty3/Gypsy retroelements and some low‐complexity sequences), leading to much of the genome upsizing predicted. We suggest that the differential dynamics of low‐ and high‐copy sequences reveal two genomic processes that occur subsequent to allopolyploidy. The loss of low‐copy sequences, common to both allopolyploids, may reflect genome diploidization, a process that also involves loss of duplicate copies of genes and upstream regulators. In contrast, genome size divergence between allopolyploids is manifested through differential accumulation and/or deletion of high‐copy‐number sequences.     

Functional analysis of the pBC1 replicon from <Emphasis Type="Italic">Bifidobacterium catenulatum</Emphasis> L48

To determine the minimal replicon of pBC1 (a 2.5-kb cryptic plasmid of Bifidobacterium catenulatum L48) and to check the functionality of its identified open reading frames (ORFs) and surrounding sequences, different segments of pBC1 were amplified by polymerase chain reaction (PCR) and cloned into pBif, a replication probe vector for bifidobacteria. The largest fragment tested in this manner encompassed most of the pBC1 sequence, while the shortest just included the repB gene and its immediate upstream sequences. Derivatives were all shown to allow replication in bifidobacteria. Surprisingly, both the transformation frequency and segregational stability in the absence of antibiotic selection decreased with reducing plasmid length. The relative copy number of the constructs (ranging from around 3 to 23 copies per chromosome equivalent, as compared to 30 copies for the original pBC1) was shown to be strain dependent and to decrease with reducing plasmid length. These results suggest that, although not essential, the copG-like and orfX-like genes of pBC1 play important roles in pBC1 replication. Interruption of repB produced a construct incapable of replicating in bifidobacteria. The analysis of pBC1 will allow its use in the construction of general and specific cloning vectors.     

Fluorescence in situ hybridization on extended DNA fibres as a tool to analyse complex T‐DNA loci in potato

In this study the T-DNA composition of four antisense potato transformants showing complete or very strong inhibition of granule-bound starch synthase (GBSS) activity was analysed in detail. By Southern blot hybridizations, it was determined that all four transformants contained T-DNAs on multiple linkage groups and that most linkage groups contained multiple T-DNA copies, often in combination with non-T-DNA vector sequences. Subsequently, fluorescence in situ hybridization was performed on extended DNA fibres (‘fibre-FISH’) of three progeny plants each containing a single linkage group with a complex T-DNA organization. By using two differently labelled probes, one consisting of T-DNA sequences and the other of vector DNA sequences, it was possible to visualize the composition of complex loci. DNA sequences of 5–6 kb were well distinguishable. With this technique it is possible to determine T-DNA copy number, and arrangement of T-DNA and vector DNA sequences in a locus, more accurately than by Southern blot analysis alone. Therefore, fibre-FISH is a valuable supplementary tool to study T-DNA integrations in detail.     

An unusual mutation in RepA increases the copy number of a stringently controlled plasmid (Rtsl derivative) by over one hundred fold

A copy number mutant of the Rtsl replicon (copy number 1–2 copies/cell) was obtained. A one-base substitution in the repA region results in a single amino acid change from histidine to asparagine at position 159. This mutation increased the plasmid copy number by up to 120-fold depending upon the growth conditions. At 42.5° C the plasmid with the wild type replicon was unstable while the mutated replicon was relatively stable.     

The minimal replicon of the Streptomyces ghanaensis plasmid pSG5 identified by subcloning and Tn5 mutagenesis

Summary The cryptic plasmid pSG5 of Streptomyces ghanaensis 5/1B (DSM 2932) was characterized to have a molecular size of 12.7 kb and an approximate copy number of 20–50 per chromosome. A bifunctional derivative, designated pSW344E, consisting of pSG5 and an Escherichia coli vector plasmid was constructed. Following Tn5 mutagenesis in E. coli, the replication functions of the mutagenized pSW344E plasmids were analysed in S. lividans. A 2 kb DNA fragment of the pSG5 replicon was found to carry replication functions. Subcloning of pSG5 DNA into various replication probe vectors resulted in the identification of the pSG5 minimal replicon, identical to the above mentioned 2 kb DNA region. Several small bifunctional plasmids, able to replicate in E. coli as well as in Streptomyces, were generated during subcloning. Some of these plasmids were found to be useful shuttle vectors.     

Construction of a hybrid bacteriophage-plasmid recombinant DNA vector.

A phage-plasmid hybrid was constructed for use as a recombinant DNA vector, allowing the propagation of cloned EcoRI restriction endonuclease fragments of about 2 X 10(6) to 11 X 10(6) daltons. The colicin E1 plasmid replicon was fused to the left arm of a lambdagt generalized transducing phage with a thermolabile repressor, yielding a genome which could be replicated either by phage lambda functions or via the colicin E1 plasmid replicon. At the nonpermissive temperature, phage functions were derepressed and phage growth occurred lytically. Alternatively, at the permissive temperature, lambda functions were repressed and the vector replicated as a covalently closed circular plasmid. The phage-plasmid hybrid vector could be maintained at a copy number determined by the colicin E1 plasmid replicon and was also sensitive to amplification after chloramphenicol treatment. An EcoRI fragment of Escherichia coli DNA encoding genes of the arabinose operon also was inserted into the central portion of the vector.     

Construction,properties, and application of the pCB5 plasmid,a novel conjugative shuttle vector with a Cupriavidus basilensis origin of replication

Cupriavidus basilensis is a species with diverse metabolic capabilities, including degradation of xenobiotics and heavy metal resistance. Although the genomes of several strains of this species have been sequenced, no plasmid has yet been constructed for genetic engineering in this species. In this study, we identified a novel plasmid, designated pWS, from C. basilensis WS with a copy number of 1–3 per cell and a length of 2150 bp. pWS contained three protein-coding genes, among which only rep was required for plasmid replication. Rep showed no homology with known plasmid replication initiators. Unlike most plasmids, pWS did not have a cis-acting replication origin outside the region of rep. The minimal replicon of pWS was stable in C. basilensis WS without selection. A conjugative C. basilensis/Escherichia coli shuttle vector, pCB5, was constructed using the minimal replicon of pWS. Interestingly, the copy number of pCB5 was flexible and could be manipulated. Enhancing the expression level of Rep in pCB5 by either doubling the promoter or coding region of rep resulted in doubling of the plasmid copy number. Moreover, replacing the native promoter of rep with the lac promoter increased the copy number by over fivefold. Finally, using two different β-galactosidase reporting systems constructed with pCB5, we successfully demonstrated the different regulatory patterns of bph and dmp operons during diphenyl ether (DE) degradation in C. basilensis WS. Thus, this shuttle vector provided an efficient tool for DNA cloning and metabolic engineering in C. basilensis.

     

T-DNA vector backbone sequences are frequently integrated into the genome of transgenic plants obtained by Agrobacterium-mediated transformation

Transgenic Arabidopsis and tobacco plants (125) derived from seven Agrobacterium-mediated transformation experiments were screened by polymerase chain reaction and DNA gel blot analysis for the presence of vector `backbone' sequences. The percentage of plants with vector DNA not belonging to the T-DNA varied between 20% and 50%. Neither the plant species, the explant type used for transformation, the replicon type nor the selection seem to have a major influence on the frequency of vector transfer. Only the border repeat sequence context could have an effect because T-DNA vector junctions were found in more than 50% of the plants of three different transformation series in which T-DNAs with octopine borders without inner border regions were used. Strikingly, many transgenic plants contain vector backbone sequences linked to the left T-DNA border as well as vector junctions with the right T-DNA border. DNA gel blots indicate that in most of these plants the complete vector sequence is integrated. We assume that integration into the plant genome of complete vector backbone sequences could be the result of a conjugative transfer initiated at the right border and subsequent continued copying at the left and right borders, called read-through. This model would imply that the left border is not frequently recognized as an initiation site for DNA transfer and that the right border is not efficiently recognized as a termination site for DNA transfer.     

Phage-lambda-mediated transduction of non-conjugative plasmids is promoted by transposons

Transduction experiments using phage λ as a vector have shown that non-conjugative plasmids can be transduced from one cell to the other, provided the phage or the plasmid DNA carries a copy of a Tn3-like transposon. The transduction is a result of replicon fusion between the phage and the plasmid DNA occurring during the transposition event.     

P1 plasmid replication. Purification and DNA-binding activity of the replication protein RepA

The minimal P1 replicon encompasses an open reading frame for the essential replication protein, RepA, bracketed by two sets of multiple 19-base pair repeated sequences, incA and incC. This study focused on the interaction of RepA with the incC and incA repeated sequences because earlier studies suggested that incA might control P1 copy number by titrating limiting amounts of RepA and because the incC repeats, which are part of the origin of replication, contain the promoter for repA. RepA is essential for origin function, autoregulates its own synthesis from the promoter, and, when overproduced, blocks origin function. In this study, RepA was overproduced from an expression vector and purified to 90% homogeneity. The binding of RepA to the DNA encompassing repeat sequences was assayed by monitoring the mobility of protein-DNA complexes on polyacrylamide gels. Distinct species of retarded bands were seen with the maximum number of bands corresponding to the number of repeats present in the target fragment. No evidence was found for RepA binding to fragments not containing the repeats. This suggests that the specific binding of RepA to the repeats may be involved in each of the diverse activities of RepA.     

DNA probes for species identification of mosquitoes in the Anopheles gambiae complex

Abstract. Identification of species within the Anopheles gambiae Giles species complex is essential for the correct evaluation of malaria vector ecology studies and control programmes. The development of DNA probes to distinguish species of the An.gambiae complex is described. Genomic libraries were prepared for four members of the An.gambiae complex. These were screened using radiolabeled DNA from different species of An. gambiae sensu lato and a number of clones selected on the basis of their species specificity. These clones could be divided into two groups, each containing homologous sequences. Sequences homologous to group 1 inserts are highly reiterated in the genomes of Anopheles arabiensis Patton and Anopheles merus Dönitz, present in low copy number in Anopheles melas Theobald, but were not detected in Anopheles gambiae sensu stricto. Studies on the organization of this sequence in the genome of An.arabiensis show that homologous sequences are male specific and interspersed within the chromatin. Sequences homologous to group 2 inserts are highly repeated in the genomes of An.merus and An.melas, but present in low copy number in An.gambiae s.s. and An.arabiensis. Group 2 homologous sequences are not sex-specific in the species tested and appear to be tandemly repeated. When used as hybridization probes, these sequences provide a sensitive means for the identification of species within the Anopheles gambiae complex.     

The Agrobacterium rhizogenes pRi TL-DNA segment as a gene vector system for transformation of plants

Summary A plant gene transfer system was developed from the Agrobacterium rhizogenes pRi15834 TL-DNA region. Intermediate integration vectors constructed from ColE1-derived plasmids served as cloning vectors in Escherichia coli and formed cointegrates into the TL-DNA after transfer to A. rhizogenes. An A. rhizogenes strain with pBR322 plasmid sequences replacing part of the TL-DNA was also constructed. Plasmids unable to replicate in Agrobacterium can integrate into this TL-DNA by homologous recombination through pBR322 sequences. No loss of pathogenicity was observed with the strains formed after integration of intermediate vectors or strains carrying pBR322 in the TL-DNA segment. Up to 15 kb of DNA have been transferred to plant cells with these systems. The T-DNA from a binary vector was cotransformed into hairy roots which developed after transfer of the wild-type pRi T-DNA. Tested on Lotus corniculatus the TL-derived vector system transformed 90% of the developed roots and the T-DNA from the binary vector was cotransformed into 60% of the roots. Minimum copy numbers of one to five were found. Both constitutive and organ-specific plant genes were faithfully expressed after transfer to the legume L. corniculatus.