On the mechanism of pairing of single- and double-stranded DNA molecules by the recA and single-stranded DNA-binding proteins of Escherichia coli

The pairing of single- and double-stranded DNA molecules at homologous sequences promoted by recA and single-stranded DNA-binding proteins of Escherichia coli follows apparent first-order kinetics. The initial rate and first-order rate constant for the reaction are maximal at approximately 1 recA protein/3 and 1 single-stranded DNA-binding protein/8 nucleotides of single-stranded DNA. The initial rate increases with the concentration of duplex DNA; however, the rate constant is independent of duplex DNA concentration. Both the rate constant and extent of reaction increase linearly with increasing length of duplex DNA over the range 366 to 8623 base pairs. In contrast, the rate constant is independent of the size of the circular single-stranded DNA between 6,400 and 10,100 nucleotides. No significant effect on reaction rate is observed when a single-stranded DNA is paired with 477 base pairs of homologous duplex DNA joined to increasing lengths of heterologous DNA (627-2,367 base pairs). Similarly, heterologous T7 DNA has no effect on the rate of pairing. These findings support a mechanism in which a recA protein-single-stranded DNA complex interacts with the duplex DNA to produce an intermediate in which the two DNA molecules are aligned at homologous sequences. Conversion of the intermediate to a paranemic joint then occurs in a rate-determining unimolecular process.     

PCR preparation of DNA inserts from lambda and plasmid vectors for RFLP mapping

A simplified method is described for preparing insert DNA for labelling reactions to be used in Southern hybridization. This method works with sequences cloned into both plasmid and lambda phage, and eliminates many of the steps leading to the labelling reaction. Small quantities of hostE. coli or lambda phage carrying a probe sequence are lysed and amplified via the polymerase chain reaction using standard sequencing primers. Unincorporated nucleotides are removed by ethanol precipitation or gel purification and insert DNA is ready for radio-labelling. This method reduces the time and expense associated with conventional insert preparation, and greatly simplifies the use of sequences cloned into lambda phage.     

Mutation detection using nucleotide analogs that alter electrophoretic mobility.

A simple primer extension assay has been developed to distinguish homologous DNA segments differing by as little as a single nucleotide. DNA strands are synthesized with one of the four natural nucleotides replaced with an analog that affects electrophoretic mobility. DNAs that are the same length but differ in the number of analog molecules per strand exhibit different mobilities on a sequencing gel. In combination with the polymerase chain reaction (PCR; 1, 2), this method has been used to distinguish mutant and normal alleles of the human insulin receptor gene that differ by a single-base substitution. The method appears to be generally applicable to the detection of any nucleotide polymorphism in any segment of DNA.     

Reading DNA at single-nucleotide resolution with a mutant MspA nanopore and phi29 DNA polymerase

Nanopore technologies are being developed for fast and direct sequencing of single DNA molecules through detection of ionic current modulations as DNA passes through a pore's constriction. Here we demonstrate the ability to resolve changes in current that correspond to a known DNA sequence by combining the high sensitivity of a mutated form of the protein pore Mycobacterium smegmatis porin A (MspA) with phi29 DNA polymerase (DNAP), which controls the rate of DNA translocation through the pore. As phi29 DNAP synthesizes DNA and functions like a motor to pull a single-stranded template through MspA, we observe well-resolved and reproducible ionic current levels with median durations of ～28 ms and ionic current differences of up to 40 pA. Using six different DNA sequences with readable regions 42-53 nucleotides long, we record current traces that map to the known DNA sequences. With single-nucleotide resolution and DNA translocation control, this system integrates solutions to two long-standing hurdles to nanopore sequencing.     

Information concerning the mechanism of electrophoretic DNA separation provided by quantitative video-epifluorescence microscopy

Changes in conformation, length, and mobility of individual DNA molecules during agarose gel electrophbresis were measured using video micrographs obtained by epifluorescence microscopy. Globular, V-shaped, and linear conformations of DNA are found. The mobility, upon transformation from the globular to the V-shaped conformation, decreases, suggesting a collision with a gel fiber. The duration of interaction between DNA and gel fiber is proportional to the length of DNA. Hypothetically, this proportionality underlies the size separation of DNA by agarose gel electrophoresis. DNA release from the gel fiber appears to involve the movement of the arms of the V-shaped molecule around the gel fiber. Concomitant with this movement is a length reduction the degree of which is constant for DNA of various lengths in a particular buffer milieu. The luminant densitometric profiles of DNA molecules in the V conformation show maxima at the ends and apex of the V. The unequal distribution of nucleotides along the DNA chain appears to provide the driving force for the molecular movement around the gel fiber.     

Method enabling fast partial sequencing of cDNA clones

Pyrosequencing is a nonelectrophoretic single-tube DNA sequencing method that takes advantage of cooperativity between four enzymes to monitor DNA synthesis. To investigate the feasibility of the recently developed technique for tag sequencing, 64 colonies of a selected cDNA library from human were sequenced by both pyrosequencing and Sanger DNA sequencing. To determine the needed length for finding a unique DNA sequence, 100 sequence tags from human were retrieved from the database and different lengths from each sequence were randomly analyzed. An homology search based on 20 and 30 nucleotides produced 97 and 98% unique hits, respectively. An homology search based on 100 nucleotides could identify all searched genes. Pyrosequencing was employed to produce sequence data for 30 nucleotides. A similar search using BLAST revealed 16 different genes. Forty-six percent of the sequences shared homology with one gene at different positions. Two of the 64 clones had unique sequences. The search results from pyrosequencing were in 100% agreement with conventional DNA sequencing methods. The possibility of using a fully automated pyrosequencer machine for future high-throughput tag sequencing is discussed.     

Direct sequencing of bacteriophage T4 DNA with a thermostable DNA polymerase

We present a simple and convenient protocol for the direct sequencing of bacteriophage T4 genomic DNA. The method utilizes the thermostable DNA polymerase from Thermus aquaticus (Taq) and 32P-end-labeled oligodeoxyribonucleotide primers to produce extension products that allow the analysis of at least 200 nucleotides (nt) on a single sequencing gel. Single-nt changes in the template were easily detectable following an overnight exposure of the autoradiograms. Comparison of sequences from fully modified T4 DNA containing glucosylated hydroxymethyldeoxycytosine or from templates containing cytosine showed little difference in sequence clarity. These techniques considerably simplify the molecular analysis of T-even bacteriophages and should be compatible with automated sequencing methods which employ 5'-end-labeled primers.     

Dideoxy sequencing of double-stranded DNA from poly(A)-extended 3'-ends

A simple method has been developed for sequencing double-stranded DNA by the chain termination method. The DNA to be sequenced is cut with a restriction enzyme that leaves a 3'-overhang which is extended by terminal deoxynucleotidyltransferase with limiting amounts of dATP. The sequencing reaction is then primed with an oligo(dT) primer which has a base pair "anchor" complementary to the overhang generated by the restriction enzyme. The method presented here eliminates the need for subcloning of the DNA or sequencing by chemical modification. Furthermore, sequences of more than 300 nucleotides are obtained from any 3'-overhanging restriction end.     

Transcriptional products of the human placental lactogen gene

Poly(A+)RNA from human term placenta was translated in a mouse-derived cell-free system. A major band corresponding to preplacental lactogen (pre-hPL) and a minor band co-migrating with mature hPL represent approximately 15% of the total radioactively labeled proteins. Analysis of the poly(A+)RNA by agarose gel electrophoresis showed a prominent band at approximately 860 nucleotides. A corresponding band was observed in Northern blots of total RNA, hybridized with 32P-labeled recombinant plasmid containing a portion of hPL cDNA. Similar analyses of nuclear RNA showed at least four additional bands at 990, 1200, 1460, and 1760 nucleotides, respectively, which are likely precursors of hPL mRNA. Poly(A+)RNA was also used to construct a cDNA library. Approximately 5% of the clones were found to hybridize to hPL DNA sequences, indicating that hPL mRNA is indeed very abundant in term placental tissue. One recombinant plasmid containing an insert of approximately 815 base pairs was isolated and characterized by restriction enzyme mapping and electron microscopy. Heteroduplexes constructed between the cDNA and the DNA isolated from an hPL genomic clone revealed four small intervening sequences which can account for the lengths observed for the hnRNA molecules.     

Nucleotide sequence determination and secondary structure of Xenopus U3 snRNA

Using a combination of RNA sequencing and construction of cDNA clones followed by DNA sequencing, we have determined the primary nucleotide sequence of U3 snRNA in Xenopus laevis and Xenopus borealis. This molecule has a length of 219 nucleotides. Alignment of the Xenopus sequences with U3 snRNA sequences from other organisms reveals three evolutionarily conserved blocks. We have probed the secondary structure of U3 snRNA in intact Xenopus laevis nuclei using single-strand specific chemical reagents; primer extension was used to map the positions of chemical modification. The three blocks of conserved sequences fall within single-stranded regions, and are therefore accessible for interaction with other molecules. Models of U3 snRNA function are discussed in light of these data.     

Sequence of 1019 nucleotides encompassing one of the inverted repeats from the yeast 2 micrometer plasmid.

A sequence of 1019 nucleotides encompassing one of the 600 base inverted repeats and non-repeated flanking regions has been determined in the type A yeast 2 micrometers plasmid cloned in pMB9. Methods are described for applying the Maxam-Gilbert sequencing procedure to DNA fragments labelled at the 3'-end using a T4-polymerase exchange/repair reaction and for sequencing 5'-end labelled fragments using dideoxy-nucleotides as chain terminators in the presence of E. coli DNA polymerase (nach Klenow). A notable feature of the sequence is its unusual content of symmetry elements. In one region of 140 nucleotides, 137 are involved in a complex arrangement of direct and inverted repeats linked by palindromic sequences.     

Partial uracil–DNA–glycosylase treatment for screening of ancient DNA

The challenge of sequencing ancient DNA has led to the development of specialized laboratory protocols that have focused on reducing contamination and maximizing the number of molecules that are extracted from ancient remains. Despite the fact that success in ancient DNA studies is typically obtained by screening many samples to identify a promising subset, ancient DNA protocols have not, in general, focused on reducing the time required to screen samples. We present an adaptation of a popular ancient library preparation method that makes screening more efficient. First, the DNA extract is treated using a protocol that causes characteristic ancient DNA damage to be restricted to the terminal nucleotides, while nearly eliminating it in the interior of the DNA molecules, allowing a single library to be used both to test for ancient DNA authenticity and to carry out population genetic analysis. Second, the DNA molecules are ligated to a unique pair of barcodes, which eliminates undetected cross-contamination from this step onwards. Third, the barcoded library molecules include incomplete adapters of short length that can increase the specificity of hybridization-based genomic target enrichment. The adapters are completed just before sequencing, so the same DNA library can be used in multiple experiments, and the sequences distinguished. We demonstrate this protocol on 60 ancient human samples.     

A systemic DNA sequencing strategy

A systematic DNA sequencing strategy is presented. Instead of the sequencing of randomly selected DNA fragments (the “shotgun” method), the nucleotide order is progressively determined along a DNA chain using the dideoxynucleotide termination sequencing system and the single-stranded bacteriophage vector M13 derivatives. The length of DNA along which the sequence data can be progressively read appears to be limited only by the insertion capacity of the vector. As an example of this strategy a recombinant replicative form with a 2327 nucleotide long HindIII fragment from the restriction enzyme digest of bacteriophage λ DNA was prepared. The replicative form of the recombinant was partially digested with DNAase I in the presence of Mn²⁺. As the replication origin of the phage vector was located near one end of the inserted DNA and the priming site of the vector at the other, the breaks outside the inserted DNA either destroyed the phage or removed the priming site. With the use of a unique restriction site close to the priming site, the breaks within the inserted DNA gave rise to a recombinant mixture with the inserted DNA fixed at one end and sequentially shortened at the other. Using the ddT reaction screening procedure, 11 recombinants were identified in which the inserted DNA varied in length by about 200 nucleotides. Sequencing these recombinants by the dideoxynucleotide sequencing system covered the whole 2327 nucleotides of the HindIII DNA fragment. The average number of nucleotides read from a gel was 210, which fell into the most readable region of a sequencing gel: the overlapping regions between two gels were of 33 to 48 nucleotides.     

Deoxyadenylate-rich and deoxyguanylate-rich regions in mammalian DNA

The presence of deoxyadenylate-rich and deoxyguanylate-rich regions in mammalian DNA has been demonstrated by hybridization with ³H-labelled poly(U) and ³H-labelled poly(C). For hamster BHK-21/C13 cells, the dA-rich regions are up to 130 nucleotides long and comprise up to 0.4% of the DNA. Those dA-rich regions which comprise 0.13% of the DNA contain 2 to 6% of bases other than adenine. The dG-rich regions, in which 10 to 30% of the bases are other than guanine, are less than 40 nucleotides long and are present at a level of about 0.1% of the DNA. Exhaustive digestion of the hybrids with RNAase enables detection of deoxyhomopolymeric regions in the DNA, poly (dA) sequences of an average size of about 30 nucleotides long accounting for 0.008% of the DNA, and poly(dG) sequences, 17 nucleotides long, comprising 0.0016% of the DNA.Both dA-rich and dG-rich regions are found in DNA sequences with a wide variety of base composition. Extensive shearing of the DNA is required to produce some enrichment for dA-rich sequences in the (A + T)-rich fraction, although dG-rich sequences are slightly enriched in the (G + C)-rich fraction of even unsheared DNA. The buoyant density of hybrid molecules was found to be significantly greater than that of unhybridized DNA only when highly sheared DNA was used. These findings suggest that the dA-rich and dG-rich regions have a widespread distribution throughout DNA molecules. In situ hybridization studies with ³H-labelled poly(U) further suggest that the dA-rich regions are not localized to any particular chromosome or to any specific region of the chromosomes. Analysis of DNA from a number of different species has shown that, in general, the dA-rich and dG-rich regions are present at a much higher level in mammalian DNA than in bacterial, bacteriophage or mammalian virus DNA.Possible functions of these unusual deoxynucleotide sequences are discussed.     

An integrative approach for the optical sequencing of single DNA molecules

A new approach for optically sequencing ensembles of single DNA molecules using DNA polymerase to mediate the consecutive incorporation of fluorochrome-labeled nucleotides into an array of large single DNA molecules is presented. The approach utilizes cycles of labeled fluorochrome addition, detection to count incorporations, and bleaching to reset the counter. These additions are imaged and analyzed to estimate the number of labeled additions and to correlate them on a per-locus basis along DNA backbones. Initial studies used precisely labeled polymerase chain reaction products to aid the development and validation of simple models of fluorochrome point spread functions within the imaging system. In complementary studies, nucleotides labeled with the fluorochrome R110 were incorporated into surface-elongated lambda DNA, and fluorescent signals corresponding to the addition of R110-dUTP were counted and assigned precise loci along DNA backbones. The labeled DNAs were then subjected to photobleaching and to a second cycle of addition of R110-labeled nucleotides-a second round of additions was correlated with the first to establish strings of addition histories among the ensemble of largely double-stranded templates. These results confirm the basic operational validity of this approach and point the way to the development of a practical system for optical sequencing.     

Parallel tagged sequencing on the 454 platform

Parallel tagged sequencing (PTS) is a molecular barcoding method designed to adapt the recently developed high-throughput 454 parallel sequencing technology for use with multiple samples. Unlike other barcoding methods, PTS can be applied to any type of double-stranded DNA (dsDNA) sample, including shotgun DNA libraries and pools of PCR products, and requires no amplification or gel purification steps. The method relies on attaching sample-specific barcoding adapters, which include sequence tags and a restriction site, to blunt-end repaired DNA samples by ligation and strand-displacement. After pooling multiple barcoded samples, molecules without sequence tags are effectively excluded from sequencing by dephosphorylation and restriction digestion, and using the tag sequences, the source of each DNA sequence can be traced. This protocol allows for sequencing 300 or more complete mitochondrial genomes on a single 454 GS FLX run, or twenty-five 6-kb plasmid sequences on only one 16th plate region. Most of the reactions can be performed in a multichannel setup on 96-well reaction plates, allowing for processing up to several hundreds of samples in a few days.     

The nucleotide sequence of the right-hand terminus of adenovirus type 5 DNA: implications for the mechanism of DNA replication.

The nucleotide sequence of the right-hand terminal 3% of adenovirus type 5 (Ad5) DNA has been determined, using the chemical degradation technique developed by Maxam and Gilbert (1977). This region of the genome comprises the 1003 basepair long HindIII-I fragment and the first 75 nucleotides of the adjacent HindIII-F fragment, extending from the right-hand terminus to the sequences from which the main body of the mRNA of early region 4 is transcribed. One of the origins of adenovirus DNA replication is located within this part of the genome. The sequencing results are discussed in relation to several models proposed for the mechanism of replication of linear DNA molecules, which invariably depend on the presence of specific arrangements of nucleotides at the termini of those linear DNAs.     

Accurate gene synthesis with tag-directed retrieval of sequence-verified DNA molecules

We present dial-out PCR, a highly parallel method for retrieving accurate DNA molecules for gene synthesis. A complex library of DNA molecules is modified with unique flanking tags before massively parallel sequencing. Tag-directed primers then enable the retrieval of molecules with desired sequences by PCR. Dial-out PCR enables multiplex in vitro clone screening and is a compelling alternative to in vivo cloning and Sanger sequencing for accurate gene synthesis.     

Colorimetric-detected DNA sequencing

A sensitive, colorimetric method for visualizing the band pattern of DNA sequencing reaction is described. The enzymatic incorporation of radioactive nucleotides commonly used for the band detection is replaced by biotin conjugated to the 5'-terminus of a synthetic oligonucleotide by chemical synthesis. The oligonucleotide so labeled is used as a primer for dideoxy DNA sequencing in a primer extension reaction. The products of the sequencing reactions are analyzed on a denaturing polyacrylamide gel using the direct blotting electrophoresis technique. This technique makes it possible to transfer the band pattern during the electrophoresis onto an immobilizing matrix, on which it is made visible by an enzymatic reaction in less than 3 h. This biotin-based detection method is so sensitive that the sequencing reactions can be performed under the same conditions and concentrations as those for the radioactive detection.