An Iodine Quantum Dots Based Rechargeable Sodium–Iodine Battery

Rechargeable sodium–iodine batteries represent a promising scalable electrochemical energy storage alternative as sodium and iodine are both low cost and widely abundant elements. Here, the authors demonstrate a rechargeable sodium–iodine battery that employs free‐standing iodine quantum dots (IQDs) decorated reduced graphene oxide (IQDs@RGO) as the cathode. Consistent with the density functional theory the authors find the Na⁺ ions to intercalate into the I unit cell forming stable NaI, and the battery exhibits high capacity, outstanding cycle stability (with a reversible specific capacity of 141 mA h g^?1 after 500 cycles at current density of 100 mA g^?1), and high rate performance (170, 146, 127, 112, and 95 mA h g^?1 at current densities of 100, 200, 400, 600, and 1000 mA g^?1, respectively). The reversible reactions, I₂/I₃ ^? and I₃ ^?/I^? redox couples on insertion of Na⁺ ions, are confirmed via in situ Raman spectroscopy. Notably, even after 500 cycles the morphology and structure of the IQDs exhibit no noticeable change implying their use as a stable cathode material for sodium–iodine batteries. Moreover, the IQDs based flexible full‐cells also exhibit high capacity and long cycle life (the capacity with 123 mA h g^?1 at current density of 100 mA g^?1 after 100 cycles).     

Vertically Oriented MoS2 with Spatially Controlled Geometry on Nitrogenous Graphene Sheets for High‐Performance Sodium‐Ion Batteries

Inspired by the great success of graphite in lithium‐ion batteries, anode materials that undergo an intercalation mechanism are considered to provide stable and reversible electrochemical sodium‐ion storage for sodium‐ion battery (SIB) applications. Though MoS₂ is a promising 2D material for SIBs, it suffers from deformation of its layered structure during repeated intercalation of Na⁺, resulting in undesirable electrochemical behaviors. In this study, vertically oriented MoS₂ on nitrogenous reduced graphene oxide sheets (VO‐MoS₂/N‐RGO) is presented with designed spatial geometries, including sheet density and height, which can deliver a remarkably high reversible capacity of 255 mA h g^?1 at a current density of 0.2 A g^?1 and 245 mA h g^?1 at a current density of 1 A g^?1, with a total fluctuation of 5.35% over 1300 cycles. These results are superior to those obtained with well‐developed hard carbon structures. Furthermore, a SIB full cell composed of the optimized VO‐MoS₂/N‐RGO anode and a Na₂V₃(PO₄)₃ cathode reaches a specific capacity of 262 mA h g^?1 (based on the anode mass) during 50 cycles, with an operated voltage range of 2.4 V, demonstrating the potentially rewarding SIB performance, which is useful for further battery development.     

High‐Energy Density Li‐Ion Capacitor with Layered SnS2/Reduced Graphene Oxide Anode and BCN Nanosheet Cathode

Lithium‐ion capacitors (LICs) with capacitor‐type cathodes and battery‐type anodes are considered a promising next‐generation advanced energy storages system that meet the requirements of high energy density and power density. However, the mismatch of charge‐storage capacity and electrode kinetics between positive and negative electrodes remains a challenge. Herein, layered SnS₂/reduced graphene oxide (RGO) nanocomposites are developed for negative electrodes and a 2D B/N codoped carbon (BCN) nanosheet is designed for the positive electrode. The SnS₂/RGO derived from SnS₂‐bonded RGO of high conductivity exhibits a capacity of 1198 mA h g^?1 at 100 mA g^?1. Boron and nitrogen atoms in BCN are found to promote adsorption of anions, which enhance the pseudocapacitive contribution as well as expanding the voltage of LICs. A quantitative kinetics analysis indicates that the SnS₂/RGO electrodes with a dominating capacitive mechanism and a diminished intercalation process, benefit the kinetic balance between the two electrodes. With this particular structure, the LIC is able to operate at the highest operating voltage for these devices recorded to date (4.5 V), exhibiting an energy density of 149.5 W h kg^?1, a power density of 35 kW kg^?1, and a capacity retention ratio of 90% after 10 000 cycles.     

Amorphous Tin‐Based Composite Oxide: A High‐Rate and Ultralong‐Life Sodium‐Ion‐Storage Material

Energy‐storage technology is moving beyond lithium batteries to sodium as a result of its high abundance and low cost. However, this sensible transition requires the discovery of high‐rate and long‐lifespan anode materials, which remains a significant challenge. Here, the facile synthesis of an amorphous Sn₂P₂O₇/reduced graphene oxide nanocomposite and its sodium storage performance between 0.01 and 3.0 V are reported for the first time. This hybrid electrode delivers a high specific capacity of 480 mA h g^?1 at a current density of 50 mA g^?1 and superior rate performance of 250 and 165 mA h g^?1 at 2 and 10 A g^?1, respectively. Strikingly, this anode can sustain 15 000 cycles while retaining over 70% of the initial capacity. Quantitative kinetic analysis reveals that the sodium storage is governed by pseudocapacitance, particularly at high current rates. A full cell with sodium super ionic conductor (NASICON)‐structured Na₃V₂(PO₄)₂F₃ and Na₃V₂(PO₄)₃ as cathodes exhibits a high energy density of over 140 W h kg^?1 and a power density of nearly 9000 W kg^?1 as well as stability over 1000 cycles. This exceptional performance suggests that the present system is a promising power source for promoting the substantial use of low‐cost energy storage systems.     

MoS2/Graphene Nanosheets from Commercial Bulky MoS2 and Graphite as Anode Materials for High Rate Sodium‐Ion Batteries

Tuning heterointerfaces between hybrid phases is a very promising strategy for designing advanced energy storage materials. Herein, a low‐cost, high‐yield, and scalable two‐step approach is reported to prepare a new type of hybrid material containing MoS₂/graphene nanosheets prepared from ball‐milling and exfoliation of commercial bulky MoS₂ and graphite. When tested as an anode material for a sodium‐ion battery, the as‐prepared MoS₂/graphene nanosheets exhibit remarkably high rate capability (284 mA h g^?1 at 20 A g^?1 (≈30C) and 201 mA h g^?1 at 50 A g^?1 (≈75C)) and excellent cycling stability (capacity retention of 95% after 250 cycles at 0.3 A g^?1). Detailed experimental measurements and density functional theory calculation reveal that the functional groups in 2D MoS₂/graphene heterostructures can be well tuned. The impressive rate capacity of the as‐prepared MoS₂/graphene hybrids should be attributed to the heterostructures with a low degree of defects and residual oxygen containing groups in graphene, which subsequently improve the electronic conductivity of graphene and decrease the Na⁺ diffusion barrier at the MoS₂/graphene interfaces in comparison with the acid treated one.     

Promoting Highly Reversible Sodium Storage of Iron Sulfide Hollow Polyhedrons via Cobalt Incorporation and Graphene Wrapping

Sodium ion batteries (SIBs) have drawn significant attention owing to their low cost and inherent safety. However, the absence of suitable anode materials with high rate capability and long cycling stability is the major challenge for the practical application of SIBs. Herein, an efficient anode material consisting of uniform hollow iron sulfide polyhedrons with cobalt doping and graphene wrapping (named as CoFeS@rGO) is developed for high‐rate and long‐life SIBs. The graphene‐encapsulated hollow composite assures fast and continuous electron transportation, high Na⁺ ion accessibility, and strong structural integrity, showing an extremely small volume expansion of only 14.9% upon sodiation and negligible volume contraction during the desodiation. The CoFeS@rGO electrode exhibits high specific capacity (661.9 mAh g^?1 at 100 mA g^?1), excellent rate capability (449.4 mAh g^?1 at 5000 mA g^?1), and long cycle life (84.8% capacity retention after 1500 cycles at 1000 mA g^?1). In situ X‐ray diffraction and selected‐area electron diffraction patterns show that this novel CoFeS@rGO electrode is based on a reversible conversion reaction. More importantly, when coupled with a Na₃V₂(PO₄)₃/C cathode, the sodium ion full battery delivers a superexcellent rate capability (496.8 mAh g^?1 at 2000 mA g^?1) and ≈96.5% capacity retention over 200 cycles at 500 mA g^?1 in the 1.0–3.5 V window. This work indicates that the rationally designed anode material is highly applicable for the next generation SIBs with high‐rate capability and long‐term cyclability.     

Revealing Pseudocapacitive Mechanisms of Metal Dichalcogenide SnS2/Graphene‐CNT Aerogels for High‐Energy Na Hybrid Capacitors

SnS₂ nanoplatelet electrodes can offer an exceptionally high pseudocapacitance in an organic Na⁺ ion electrolyte system, but their underlying mechanisms are still largely unexplored, hindering the practical applications of pseudocapacitive SnS₂ anodes in Na‐ion batteries (SIBs) and Na hybrid capacitors (SHCs). Herein, SnS₂ nanoplatelets are grown directly on SnO₂/C composites to synthesize SnS₂/graphene‐carbon nanotube aerogel (SnS₂/GCA) by pressurized sulfidation where the original morphology of carbon framework is preserved. The composite electrode possessing a large surface area delivers a remarkable specific capacity of 600.3 mA h g^?1 at 0.2 A g^?1 and 304.8 mA h g^?1 at an ultrahigh current density of 10 A g^?1 in SIBs. SHCs comprising a SnS₂/GCA composite anode and an activated carbon cathode present exceptional energy densities of 108.3 and 26.9 W h kg^?1 at power densities of 130 and 6053 W kg^?1, respectively. The in situ transmission electron microscopy and the density functional theory calculations reveal that the excellent pseudocapacitance originates from the combination of Na adsorption on the surface/Sn edge of SnS₂ nanoplatelets and ultrafast Na⁺ ion intercalation into the SnS₂ layers.     

A Novel Aluminum‐Ion Battery: Al/AlCl3‐[EMIm]Cl/Ni3S2@Graphene

Due to an ever‐increasing demand for electronic devices, rechargeable batteries are attractive for energy storage systems. A novel rechargeable aluminum‐ion battery based on Al³⁺ intercalation and deintercalation is fabricated with Ni₃S₂/graphene microflakes composite as cathode material and high‐purity Al foil as anode. This kind of aluminum‐ion battery comprises of an electrolyte containing AlCl₃ in an ionic liquid of 1‐ethyl‐3‐methylimidazolium chloride ([EMIm]Cl). Galvanostatic charge/discharge measurements have been performed in a voltage range of 0.1–2.0 V versus Al/AlCl₄ ^?. An initial discharge specific capacity of 350 mA h g^?1 at a current density of 100 mA g^?1 is achieved, and the discharge capacity remains over 60 mA h g^?1 and coulombic efficiency of 99% after 100 cycles. Typically, for the current density at 200 mA g^?1, the initial charge and discharge capacities are 300 and 235 mA h g^?1, respectively. More importantly, it should be emphasized that the battery has a high discharge voltage plateau (≈1.0 V vs Al/AlCl₄ ^?). These meaningful results represent a significant step forward in the development of aluminum‐ion batteries.     

Amphicharge‐Storable Pyropolymers Containing Multitiered Nanopores

In this study, hierarchically nanoporous pyropolymers (HN‐PPs) including numerous redox‐active heteroatoms are fabricated from polyaniline nanotubes by heating with KOH. In the large operating voltage range 1.0–4.8 V versus Li⁺/Li, HN‐PPs store amphicharges by a pseudocapacitive manner of Li‐ion (mainly <3.0 V) and electrochemical double layer formation of anion (primarily >3.0 V). Through these surface‐driven charge storage behaviors, HN‐PPs achieve a significantly high specific capacity of ≈460 mA h g^?1 at 0.5 A g^?1, maintaining specific capacities of 140 mA h g^?1 at a high specific current of 30 A g^?1 and 305 mA h g^?1 after 2000 cycles at 3 A g^?1. Furthermore, asymmetric energy storage devices based on HN‐PPs deliver a high specific energy of 265 W h kg^?1 and high specific power of 5081 W kg^?1 with long‐term cycling performance.     

Amorphous MoS3 Infiltrated with Carbon Nanotubes as an Advanced Anode Material of Sodium‐Ion Batteries with Large Gravimetric,Areal, and Volumetric Capacities

The search for earth‐abundant and high‐performance electrode materials for sodium‐ion batteries represents an important challenge to current battery research. 2D transition metal dichalcogenides, particularly MoS₂, have attracted increasing attention recently, but few of them so far have been able to meet expectations. In this study, it is demonstrated that another phase of molybdenum sulfide—amorphous chain‐like MoS₃—can be a better choice as the anode material of sodium‐ion batteries. Highly compact MoS₃ particles infiltrated with carbon nanotubes are prepared via the facile acid precipitation method in ethylene glycol. Compared to crystalline MoS₂, the resultant amorphous MoS₃ not only exhibits impressive gravimetric performance—featuring excellent specific capacity (≈615 mA h g^?1), rate capability (235 mA h g^?1 at 20 A g^?1), and cycling stability but also shows exceptional volumetric capacity of ≈1000 mA h cm^?3 and an areal capacity of >6.0 mA h cm^?2 at very high areal loadings of active materials (up to 12 mg cm^?2). The experimental results are supported by density functional theory simulations showing that the 1D chains of MoS₃ can facilitate the adsorption and diffusion of Na⁺ ions. At last, it is demonstrated that the MoS₃ anode can be paired with an Na₃V₂(PO₄)₃ cathode to afford full cells with great capacity and cycling performance.     

3D Amorphous Carbon with Controlled Porous and Disordered Structures as a High‐Rate Anode Material for Sodium‐Ion Batteries

Sodium‐ion batteries (SIBs) have a promising application prospect for energy storage systems due to the abundant resource. Amorphous carbon with high electronic conductivity and high surface area is likely to be the most promising anode material for SIBs. However, the rate capability of amorphous carbon in SIBs is still a big challenge because of the sluggish kinetics of Na⁺ ions. Herein, a three‐dimensional amorphous carbon (3DAC) with controlled porous and disordered structures is synthesized via a facile NaCl template‐assisted method. Combination of open porous structures of 3DAC, the increased disordered structures can not only facilitate the diffusion of Na⁺ ions but also enhance the reversible capacity of Na storage. When applied as anode materials for SIBs, 3DAC exhibits excellent rate capability (66 mA h g^?1 at 9.6 A g^?1) and high reversible capacity (280 mA h g^?1 at a low current density of 0.03 A g^?1). Moreover, the controlled porous structures by the NaCl template method provide an appropriate specific surface area, which contributes to a relatively high initial Coulombic efficiency of 75%. Additionally, the high‐rate 3DAC material is prepared via a green approach originating from low‐cost pitch and NaCl template, demonstrating an appealing development of carbon anode materials for SIBs.     

Hierarchical Zn–Co–S Nanowires as Advanced Electrodes for All Solid State Asymmetric Supercapacitors

A facile two‐step strategy is developed to design the large‐scale synthesis of hierarchical, unique porous architecture of ternary metal hydroxide nanowires grown on porous 3D Ni foam and subsequent effective sulfurization. The hierarchical Zn–Co–S nanowires (NWs) arrays are directly employed as an electrode for supercapacitors application. The as‐synthesized Zn–Co–S NWs deliver an ultrahigh areal capacity of 0.9 mA h cm^?2 (specific capacity of 366.7 mA h g^?1) at a current density of 3 mA cm^?2, with an exceptional rate capability (≈227.6 mA h g^?1 at a very high current density of 40 mA cm^?2) and outstanding cycling stability (≈93.2% of capacity retention after 10 000 cycles). Most significantly, the assembled Zn–Co–S NWs//Fe₂O₃@reduced graphene oxide asymmetric supercapacitors with a wide operating potential window of ≈1.6 V yield an ultrahigh volumetric capacity of ≈1.98 mA h cm^?3 at a current density of 3 mA cm^?2, excellent energy density of ≈81.6 W h kg^?1 at a power density of ≈559.2 W kg^?1, and exceptional cycling performance (≈92.1% of capacity retention after 10 000 cycles). This general strategy provides an alternative to design the other ternary metal sulfides, making it facile, free‐standing, binder‐free, and cost‐effective ternary metal sulfide‐based electrodes for large‐scale applications in modern electronics.     

Ice Templated Free‐Standing Hierarchically WS2/CNT‐rGO Aerogel for High‐Performance Rechargeable Lithium and Sodium Ion Batteries

A hybrid nanoarchitecture aerogel composed of WS₂ nanosheets and carbon nanotube‐reduced graphene oxide (CNT‐rGO) with ordered microchannel three‐dimensional (3D) scaffold structure was synthesized by a simple solvothermal method followed by freeze‐drying and post annealing process. The 3D ordered microchannel structures not only provide good electronic transportation routes, but also provide excellent ionic conductive channels, leading to an enhanced electrochemical performance as anode materials both for lithium‐ion batteries (LIBs) and sodium‐ion batteries (SIBs). Significantly, WS₂/CNT‐rGO aerogel nanostructure can deliver a specific capacity of 749 mA h g^?1 at 100 mA g^?1 and a high first‐cycle coulombic efficiency of 53.4% as the anode material of LIBs. In addition, it also can deliver a capacity of 311.4 mA h g^?1 at 100 mA g^?1, and retain a capacity of 252.9 mA h g^?1 at 200 mA g^?1 after 100 cycles as the anode electrode of SIBs. The excellent electrochemical performance is attributed to the synergistic effect between the WS₂ nanosheets and CNT‐rGO scaffold network and rational design of 3D ordered structure. These results demonstrate the potential applications of ordered CNT‐rGO aerogel platform to support transition‐metal‐dichalcogenides (i.e., WS₂) for energy storage devices and open up a route for material design for future generation energy storage devices.     

Tailored Plum Pudding‐Like Co2P/Sn Encapsulated with Carbon Nanobox Shell as Superior Anode Materials for High‐Performance Sodium‐Ion Capacitors

Sodium‐ion capacitors (SICs) are emerging energy storage devices with high energy, high power, and durable life. Sn is a promising anode material for lithium storage, but the poor conductivity of the a‐NaSn phase upon sodaition hinders its implementation in SICs. Herein, a superior Sn‐based anode material consisting of plum pudding‐like Co₂P/Sn yolk encapsulated with nitrogen‐doped carbon nanobox (Co₂P/Sn@NC) for high‐performance SICs is reported. The 8–10 nm metallic nanoparticles produced in situ are uniformly dispersed in the amorphous Sn matrix serving as conductive fillers to facilitate electron transfer in spite of the formation of electrically resistive a‐NaSn phase during cycling. Meanwhile, the carbon shell buffers the large expansion of active Sn and provides a stable electrode–electrolyte interface. Owing to these merits, the yolk–shell Co₂P/Sn@NC demonstrates a large capacity of 394 mA h g^?1 at 100 mA g^?1, high rate capability of 168 mA h g^?1 at 5000 mA g^?1, and excellent cyclability with 87% capacity retention after 10 000 cycles. By integrating the Co₂P/Sn@NC anode with a peanut shell‐derived carbon cathode in the SIC, high energy densities of 112.3 and 43.7 Wh kg^?1 at power densities of 100 and 10 000 W kg^?1 are achieved.     

Unlocking Few‐Layered Ternary Chalcogenides for High‐Performance Potassium‐Ion Storage

Potassium‐ion batteries (KIBs) have attracted increasing attention for grid‐scale energy storage due to the abundance of potassium resources, low cost, and competitive energy density. The key challenge for KIBs is to develop high‐performance electrode materials. However, the exploration of high‐capacity and ultrastable electrodes for KIBs remains challenging because of the sluggish diffusion kinetics of K⁺ ions during the charging/discharging processes. This study reports for the first time a facile ion‐intercalation‐mediated exfoliation method with Mg²⁺ cations and NO₃^– anions as ion assistants for the fabrication of expanded few‐layered ternary Ta₂NiSe₅ (EF‐TNS) flakes with interlayer spacing up to 1.1 nm and abundant Se sites (NiSe₄ tetrahedra/TaSe₆ octahedra clusters) for superior potassium‐ion storage. The EF‐TNS deliver a high capacity of 315 mAh g^–1, excellent rate capability (121 mAh g^–1 at a current density of 1000 mA g^–1), and ultrastable cycling performance (81.4% capacity retention after 1100 cycles). Detailed theoretical analysis via first‐principles calculations and experimental results elucidate that K⁺ ions intercalate through the expanded interlayers effectively and prefer to transport along zigzag pathways in layered Ta₂NiSe₅. This work provides a new avenue for designing novel ternary intercalation/pseudocapacitance‐type KIBs with high capacity, excellent rate capability, and superior long‐term cycling performance.     

Conductive and Catalytic Triple‐Phase Interfaces Enabling Uniform Nucleation in High‐Rate Lithium–Sulfur Batteries

Rechargeable lithium–sulfur batteries have attracted tremendous scientific attention owing to their superior energy density. However, the sulfur electrochemistry involves multielectron redox reactions and complicated phase transformations, while the final morphology of solid‐phase Li₂S precipitates largely dominate the battery's performance. Herein, a triple‐phase interface among electrolyte/CoSe₂/G is proposed to afford strong chemisorption, high electrical conductivity, and superb electrocatalysis of polysulfide redox reactions in a working lithium–sulfur battery. The triple‐phase interface effectively enhances the kinetic behaviors of soluble lithium polysulfides and regulates the uniform nucleation and controllable growth of solid Li₂S precipitates at large current density. Therefore, the cell with the CoSe₂/G functional separator delivers an ultrahigh rate cycle at 6.0 C with an initial capacity of 916 mAh g^?1 and a capacity retention of 459 mAh g^?1 after 500 cycles, and a stable operation of high sulfur loading electrode (2.69–4.35 mg cm^?2). This work opens up a new insight into the energy chemistry at interfaces to rationally regulate the electrochemical redox reactions, and also inspires the exploration of related energy storage and conversion systems based on multielectron redox reactions.     

Uniform Pomegranate‐Like Nanoclusters Organized by Ultrafine Transition Metal Oxide@Nitrogen‐Doped Carbon Subunits with Enhanced Lithium Storage Properties

Uniform pomegranate‐like nanoclusters (NCs) organized by ultrafine transition metal oxide@nitrogen‐doped carbon (TMO@N–C) subunits (diameter ≈ 4 nm) are prepared on a large scale for the first time through a facile, novel, and one‐pot approach. Taking pomegranate‐like Fe₃O₄@N–C NCs as an example, this unique structure provides short Li⁺/electron diffusion pathways for electrochemical reactions, structural stability during cycling, and high electrical conductivity, leading to superior electrochemical performance. The resulting pomegranate‐like Fe₃O₄@N–C NCs possess a high specific capacity (1204.3 mA h g^?1 at 0.5 A g^?1 over 100 cycles), a stable cycle life (1063.0 mA h g^?1 at 1 A g^?1, 98.4% retention after 1000 cycles), and excellent rate capacities (606.0 mA h g^?1 at 10 A g^?1, 92.0% retention; 417.1 mA h g^?1 at 20 A g^?1, 91.7% retention after 1000 cycles).     

Partially Reduced Holey Graphene Oxide as High Performance Anode for Sodium‐Ion Batteries

The current Na⁺ storage performance of carbon‐based materials is still hindered by the sluggish Na⁺ ion transfer kinetics and low capacity. Graphene and its derivatives have been widely investigated as electrode materials in energy storage and conversion systems. However, as anode materials for sodium‐ion batteries (SIBs), the severe π–π restacking of graphene sheets usually results in compact structure with a small interlayer distance and a long ion transfer distance, thus leading to low capacity and poor rate capability. Herein, partially reduced holey graphene oxide is prepared by simple H₂O₂ treatment and subsequent low temperature reduction of graphene oxide, leading to large interlayer distance (0.434 nm), fast ion transport, and larger Na⁺ storage space. The partially remaining oxygenous groups can also contribute to the capacity by redox reaction. As anode material for SIBs, the optimized electrode delivers high reversible capacity, high rate capability (365 and 131 mAh g^?1 at 0.1 and 10 A g^?1, respectively), and good cycling performance (163 mAh g^?1 after 3000 cycles at a current density of 2 A g^?1), which is among the best reported performances for carbon‐based SIB anodes.     

A New P2‐Type Layered Oxide Cathode with Extremely High Energy Density for Sodium‐Ion Batteries

Herein, a new P2‐type layered oxide is proposed as an outstanding intercalation cathode material for high energy density sodium‐ion batteries (SIBs). On the basis of the stoichiometry of sodium and transition metals, the P2‐type Na_0.55[Ni_0.1Fe_0.1Mn_0.8]O₂ cathode is synthesized without impurities phase by partially substituting Ni and Fe into the Mn sites. The partial substitution results in a smoothing of the electrochemical charge/discharge profiles and thus greatly improves the battery performance. The P2‐type Na_0.55[Ni_0.1Fe_0.1Mn_0.8]O₂ cathode delivers an extremely high discharge capacity of 221.5 mAh g^?1 with a high average potential of ≈2.9 V (vs Na/Na⁺) for SIBs. In addition, the fast Na‐ion transport in the P2‐type Na_0.55[Ni_0.1Fe_0.1Mn_0.8]O₂ cathode structure enables good power capability with an extremely high current density of 2400 mA g^?1 (full charge/discharge in 12 min) and long‐term cycling stability with ≈80% capacity retention after 500 cycles at 600 mA g^?1. A combination of electrochemical profiles, in operando synchrotron X‐ray diffraction analysis, and first‐principles calculations are used to understand the overall Na storage mechanism of P2‐type Na_0.55[Ni_0.1Fe_0.1Mn_0.8]O₂.     

Hollandite‐Type VO1.75(OH)0.5: Effective Sodium Storage for High‐Performance Sodium‐Ion Batteries

Nanosized hollandite‐type VO_1.75(OH)_0.5 is introduced as a novel cathode material for Na‐ion batteries. Structural investigation based on X‐ray diffraction and Rietveld refinement suggests the presence of numerous vacant sites for Na⁺ intercalation in the VO_1.75(OH)_0.5 structure. All of the possible Na⁺ sites and tunnel‐type Na⁺ diffusion pathways along the c‐axis are confirmed by bond‐valence‐sum analyses. The nanosized hollandite‐type VO_1.75(OH)_0.5 delivers an unexpectedly high specific capacity of ≈351 mAh g^?1 at 15.5 mA g^?1 in the voltage range of 1.0–3.7 V (vs Na⁺/Na), which agrees well with the results predicted by first‐principles calculations. In addition, combined studies using first‐principles calculations and several experimental techniques including in situ operando X‐ray diffraction and ex situ X‐ray absorption spectroscopy confirm that the nanosized hollandite‐type VO_1.75(OH)_0.5 undergoes a single‐phase reaction with a capacity retention of 71% over 200 cycles. Furthermore, the open structure and nanosized particles of hollandite‐type VO_1.75(OH)_0.5 contribute to its excellent power capability with 56% of the capacity measured at 0.05 C being delivered at 7 C.