Oriented Transformation of Co‐LDH into 2D/3D ZIF‐67 to Achieve Co–N–C Hybrids for Efficient Overall Water Splitting

Construction of well‐defined metal–organic framework precursor is vital to derive highly efficient transition metal–carbon‐based electrocatalyst for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in water splitting. Herein, a novel strategy involving an in situ transformation of ultrathin cobalt layered double hydroxide into 2D cobalt zeolitic imidazolate framework (ZIF‐67) nanosheets grafted with 3D ZIF‐67 polyhedra supported on the surface of carbon cloth (2D/3D ZIF‐67@CC) precursor is proposed. After a low‐temperature pyrolysis, this precursor can be further converted into hybrid composites composed of ultrafine cobalt nanoparticles embedded within 2D N‐doped carbon nanosheets and 3D N‐doped hollow carbon polyhedra (Co@N‐CS/N‐HCP@CC). Experimental and density functional theory calculations results indicate that such composites have the advantages of a large number of accessible active sites, accelerated charge/mass transfer ability, the synergistic effect of components as well as an optimal water adsorption energy change. As a result, the obtained Co@N‐CS/N‐HCP@CC catalyst requires overpotentials of only 66 and 248 mV to reach a current density of 10 mA cm^?2 for HER and OER in 1.0 m KOH, respectively. Remarkably, it enables an alkali‐electrolyzer with a current density of 10 mA cm^?2 at a low cell voltage of 1.545 V, superior to that of the IrO₂@CC||Pt/C@CC couple (1.592 V).     

Low‐Overpotential Electrocatalytic Water Splitting with Noble‐Metal‐Free Nanoparticles Supported in a sp3 N‐Rich Flexible COF

Covalent organic frameworks (COFs) are crystalline organic polymers with tunable structures. Here, a COF is prepared using building units with highly flexible tetrahedral sp³ nitrogens. This flexibility gives rise to structural changes which generate mesopores capable of confining very small (<2 nm sized) non‐noble‐metal‐based nanoparticles (NPs). This nanocomposite shows exceptional activity toward the oxygen‐evolution reaction from alkaline water with an overpotential of 258 mV at a current density of 10 mA cm^?2. The overpotential observed in the COF‐nanoparticle system is the best in class, and is close to the current record of ≈200 mV for any noble‐metal‐free electrocatalytic water splitting system—the Fe–Co–Ni metal‐oxide‐film system. Also, it possesses outstanding kinetics (Tafel slope of 38.9 mV dec^?1) for the reaction. The COF is able to stabilize such small‐sized NP in the absence of any capping agent because of the COF–Ni(OH)₂ interactions arising from the N‐rich backbone of the COF. Density‐functional‐theory modeling of the interaction between the hexagonal Ni(OH)₂ nanosheets and the COF shows that in the most favorable configuration the Ni(OH)₂ nanosheets are sandwiched between the sp³ nitrogens of the adjacent COF layers and this can be crucial to maximizing their synergistic interactions.     

Ultrathin High Surface Area Nickel Boride (NixB) Nanosheets as Highly Efficient Electrocatalyst for Oxygen Evolution

The overriding obstacle to mass production of hydrogen from water as the premium fuel for powering our planet is the frustratingly slow kinetics of the oxygen evolution reaction (OER). Additionally, inadequate understanding of the key barriers of the OER is a hindrance to insightful design of advanced OER catalysts. This study presents ultrathin amorphous high‐surface area nickel boride (Ni_x B) nanosheets as a low‐cost, very efficient and stable catalyst for the OER for electrochemical water splitting. The catalyst affords 10 mA cm^?2 at 0.38 V overpotential during OER in 1.0 m KOH, reducing to only 0.28 V at 20 mA cm^?2 when supported on nickel foam, which ranks it among the best reported nonprecious catalysts for oxygen evolution. Operando X‐ray absorption fine‐structure spectroscopy measurements reveal prevalence of NiOOH, as well as Ni‐B under OER conditions, owing to a Ni‐B core@nickel oxyhydroxide shell (Ni‐B@NiO_x H) structure, and increase in disorder of the NiO_x H layer, thus revealing important insight into the transient states of the catalyst during oxygen evolution.     

Crystalline Ni(OH)2/Amorphous NiMoOx Mixed‐Catalyst with Pt‐Like Performance for Hydrogen Production

The achievement of effective alkaline hydrogen production from water electrolysis is an active field of research. Herein, an integrated electrode composed of crystalline Ni(OH)₂ and amorphous NiMoO_x is fabricated onto nickel foam (denoted as Ni(OH)₂–NiMoO_x/NF). The hydrogen evolution reaction (HER) kinetics are optimized along with phase transformation process during soaking operation. An overpotential of 36 mV to drive 10 mA cm^?2 along with the low Tafel slope of 38 mV dec^?1 reveals the catalyst's excellent HER performance and a Heyrovsky‐step‐controlled HER mechanism. When assembled into a urea‐assisted water electrolyzer, a voltage of 1.42 V can reach 10 mA cm^?2. Further experiments and Fourier transform infrared spectroscopy (FTIR) results illustrate the synergy effect between crystalline and amorphous areas and the optimized water dissociation step. Crystalline Ni(OH)₂ serves as the scissor for water dissociation in an alkali environment to produce H*, while the amorphous NiMoO_x layer serves as the location for H* adsorption and H₂ desorption.     

Surface‐Guided Formation of Amorphous Mixed‐Metal Oxyhydroxides on Ultrathin MnO2 Nanosheet Arrays for Efficient Electrocatalytic Oxygen Evolution

Earth‐abundant amorphous nanomaterials with rich structural defects are promising alternative catalysts to noble metals for an efficient electrochemical oxygen evolution reaction; however, their inferior electrical conductivity and poor morphological control during synthesis hamper the full realization of their potency in electrocatalysis. Herein, a rapid surface‐guided synthetic approach is proposed to introduce amorphous and mixed‐metal oxyhydroxide overlayers on ultrathin Ni‐doped MnO₂ (Ni? MnO₂) nanosheet arrays via a galvanic replacement mechanism. This method results in a monolithic 3D porous catalyst with a small overpotential of only 232 mV to achieve a current density of 10 mA cm^?2 in 1 m KOH, which is much lower than the corresponding value of 307 mV for the Ni? MnO₂ reference sample. Detailed structural and electrochemical characterization reveal that the unique Ni? MnO₂ ultrathin nanosheet arrays do not only provide a large surface area to guide the formation of active amorphous catalyst layers but also ensure the effective charge transport owing to their high electron conductivity, collectively contributing to the greatly improved catalyst activity. It is envisioned that this highly operable surface‐guide synthetic strategy may open up new avenues for the design and fabrication of novel 3D nanoarchitectures integrated with functional amorphous materials for broadened ranges of applications.     

Ultralow Ru Loading Transition Metal Phosphides as High‐Efficient Bifunctional Electrocatalyst for a Solar‐to‐Hydrogen Generation System

Water splitting is a promising technology for sustainable conversion of hydrogen energy. The rational design of oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) bifunctional electrocatalysts with superior activity and stability in the same electrolyte is the key to promoting their large‐scale applications. Herein, an ultralow Ru (1.08 wt%) transition metal phosphide on nickel foam (Ru–MnFeP/NF) derived from Prussian blue analogue, that effectively drivies both the OER and the HER in 1 m KOH, is reported. To reach 20 mA cm^?2 for OER and 10 mA cm^?2 for HER, the Ru–MnFeP/NF electrode only requires overpotentials of 191 and 35 mV, respectively. Such high electrocatalytic activity exceeds most transition metal phosphides for the OER and the HER, and even reaches Pt‐like HER electrocatalytic levels. Accordingly, it significantly accelerates full water splitting at 10 mA cm^?2 with 1.470 V, which outperforms that of the integrated RuO₂ and Pt/C couple electrode (1.560 V). In addition, the extremely long operational stability (50 h) and the successful demonstration of a solar‐to‐hydrogen generation system through full water splitting provide more flexibility for large‐scale applications of Ru–MnFeP/NF catalysts.     

MOF‐Based Transparent Passivation Layer Modified ZnO Nanorod Arrays for Enhanced Photo‐Electrochemical Water Splitting

This study introduces zeolitic imidazolate framework‐8 (ZIF‐8) as the first metal‐organic framework based transparent surface passivation layer for photo‐electrochemical (PEC) water splitting. A significant enhancement for PEC water oxidation is demonstrated based on the in situ seamless coating of ZIF‐8 surface passivation layer on Ni foam (NF) supported ZnO nanorod arrays photoanode. The PEC performance is improved by optimizing the ZIF‐8 thickness and by grafting Ni(OH)₂ nanosheets as synergetic co‐catalyst. With respect to ZnO/NF, the optimized Ni(OH)₂/ZIF‐8/ZnO/NF photoanode exhibits a two times larger photocurrent density of 1.95 mA cm^?2 and also a two times larger incident photon to current conversion efficiency of 40.05% (350 nm) at 1.23 V versus RHE (V_RHE) under AM 1.5 G. The synergetic surface passivation and the co‐catalyst modification contribute to prolonging the charge lifetime, to promoting the charge transfer, and to decreasing the overpotential for water oxidation.     

One‐Step Controllable Synthesis of Catalytic Ni4Mo/MoOx/Cu Nanointerfaces for Highly Efficient Water Reduction

Currently, in addition to the electroactive non‐noble metal water‐splitting electrocatalysts, a scalable synthetic route and simple activity enhancement strategy is also urgently needed. In particular, the well‐controlled synthesis of the well‐recognized metal–metal nanointer face in a single step remains a key challenge. Here, the synthesis of Cu‐supported Ni₄Mo nanodots on MoO_x nanosheets (Ni₄Mo/MoO_x) with controllable Ni₄Mo particle size and d‐band structure is reported via a facile one‐step electrodeposition process. Density functional theory (DFT) calculations reveal that the active open‐shell effect from Ni‐3d‐band optimizes the electronic configuration. The Cu‐substrate enables the surface Ni–Mo alloy dots to be more electron‐rich, forming a local connected electron‐rich network, which boosts the charge transfer for effective binding of O‐related species and proton–electron charge exchange in the hydrogen evolution reaction. The Cu‐supported Ni₄Mo/MoO_x shows an ultralow overpotential of 16 mV at a current density of 10 mA cm^?2 in 1 m KOH, demonstrating the smallest overpotential, at loadings as low as 0.27 mg cm^?2, among all non‐noble metal catalysts reported to date. Moreover, an overpotential of 105 mV allows it to achieve a current density of 250 mA cm^?2 in 70 °C 30% KOH, a remarkable performance for alkaline hydrogen evolution with competitive potential for applications.     

Self‐Assemble and In Situ Formation of Ni1−xFexPS3 Nanomosaic‐Decorated MXene Hybrids for Overall Water Splitting

Herein, the authors present the development of novel 0D–2D nanohybrids consisting of a nickel‐based bimetal phosphorus trisulfide (Ni_1?xFe_xPS₃) nanomosaic that decorates on the surface of MXene nanosheets (denoted as NFPS@MXene). The nanohybrids are obtained through a facile self‐assemble process of transition metal layered double hydroxide (TMLDH) on MXene surface; followed by a low temperature in situ solid‐state reaction step. By tuning the Ni:Fe ratio, the as‐synthesized NFPS@MXene nanohybrids exhibit excellent activities when tested as electrocatalysts for overall water splitting. Particularly, with the initial Ni:Fe ratio of 7:3, the obtained Ni_0.7Fe_0.3PS₃@MXene nanohybrid reveals low overpotential (282 mV) and Tafel slope (36.5 mV dec^?1) for oxygen evolution reaction (OER) in 1 m KOH solution. Meanwhile, the Ni_0.9Fe_0.1PS₃@MXene shows low overpotential (196 mV) for the hydrogen evolution reaction (HER) in 1 m KOH solution. When integrated for overall water splitting, the Ni_0.7Fe_0.3PS₃@MXene || Ni_0.9Fe_0.1PS₃@MXene couple shows a low onset potential of 1.42 V and needs only 1.65 V to reach a current density of 10 mA cm^?2, which is better than the all noble metal IrO₂ || Pt/C electrocatalyst (1.71 mV@10 mA cm^?2). Given the chemical versatility of Ni_1?xFe_xPS₃ and the convenient self‐assemble process, the nanohybrids demonstrated in this work are promising for energy conversion applications.     

In Situ Grown Bimetallic MOF‐Based Composite as Highly Efficient Bifunctional Electrocatalyst for Overall Water Splitting with Ultrastability at High Current Densities

A newly designed water‐stable NH₂‐MIL‐88B(Fe₂Ni)‐metal–organic framework (MOF), in situ grown on the surface of a highly conducting 3D macroporous nickel foam (NF), termed NFN‐MOF/NF, is demonstrated to be a highly efficient bifunctional electrocatalyst for overall water splitting with ultrastability at high current densities. The NFN‐MOF/NF achieves ultralow overpotentials of 240 and 87 mV at current density of 10 mA cm^?2 for the oxygen evolution reaction and hydrogen evolution reaction, respectively, in 1 m KOH. For the overall water splitting, it requires only an ultralow cell voltage of 1.56 V to reach the current density of 10 mA cm^?2, outperforming the pairing of Pt/C on NF as the cathode and IrO₂ on NF as the anode at the same catalyst loading. The stability of the NFN‐MOF/NF catalyst is also outstanding, exhibiting only a minor chronopotentiometric decay of 7.8% at 500 mA cm^?2 after 30 h. The success of the present NFN‐MOF/NF catalyst is attributed to the abundant active centers, the bimetallic clusters {Fe₂Ni(µ₃‐O)(COO)₆(H₂O)₃}, in the MOF, the positive coupling effect between Ni and Fe metal ions in the MOF, and synergistic effect between the MOF and NF.     

Ultrafine Metal Nanoparticles/N‐Doped Porous Carbon Hybrids Coated on Carbon Fibers as Flexible and Binder‐Free Water Splitting Catalysts

By employing in situ reduction of metal precursor and metal‐assisted carbon etching process, this study achieves a series of ultrafine transition metal‐based nanoparticles (Ni–Fe, Ni–Mo) embedded in N‐doped carbon, which are found efficient catalysts for electrolytic water splitting. The as‐prepared hybrid materials demonstrate outstanding catalytic activities as non‐noble metal electrodes rendered by the synergistic effect of bimetal elements and N‐dopants, the improved electrical conductivity, and hydrophilism. Ni/Mo₂C@N‐doped porous carbon (NiMo‐polyvinylpyrrolidone (PVP)) and NiFe@N‐doped carbon (NiFe‐PVP) produce low overpotentials of 130 and 297 mV at a current density of 10 mA cm^?2 as catalysts for hydrogen evolution reaction and oxygen evolution reaction, respectively. In addition, these binder‐free electrodes show long‐term stability. Overall water splitting is also demonstrated based on the couple of NiMo‐PVP||NiFe‐PVP catalyzer. This represents a simple and effective synthesis method toward a new type of nanometal–carbon hybrid electrodes.     

Eutectic‐Derived Mesoporous Ni‐Fe‐O Nanowire Network Catalyzing Oxygen Evolution and Overall Water Splitting

The development of efficient and abundant water oxidation catalysts is essential for the large‐scale storage of renewable energy in the form of hydrogen fuel via electrolytic water splitting, but still remains challenging. Based upon eutectic reaction and dealloying inheritance effect, herein, novel Ni‐Fe‐O‐based composite with a unique mesoporous nanowire network structure is designed and synthesized. The composite exhibits exceptionally low overpotential (10 mA cm^?2 at an overpotential of 244 mV), low Tafel slope (39 mV dec^?1), and superior long‐term stability (remains 10 mA cm^?2 for over 60 h without degradation) toward oxygen evolution reaction (OER) in 1 m KOH. Moreover, an alkaline water electrolyzer is constructed with the Ni‐Fe‐O composite as catalyst for both anode and cathode. This electrolyzer displays superior electrolysis performance (affording 10 mA cm^?2 at 1.64 V) and long‐term durability. The remarkable features of the catalyst lie in its unique mesoporous nanowire network architecture and the synergistic effect of the metal core and the active metal oxide, giving rise to the strikingly enhanced active surface area, accelerated electron/ion transport, and further promoted reaction kinetics of OER.     

High Activity Hydrogen Evolution Catalysis by Uniquely Designed Amorphous/Metal Interface of Core–shell Phosphosulfide/N‐Doped CNTs

A cost effective hydrogen evolution reaction (HER) catalyst that does not use precious metallic elements is a crucial demand for environment‐benign energy production. The family of earth‐abundant transition metal compounds of nitrides, carbides, chalcogenides, and phosphides is one of the promising candidates for such a purpose, particularly in acidic conditions. However, its catalytic performance is still needed to be enhanced through novel material designs and crystalline engineering. Herein, a chemically and electronically coupled transition metal phosphosulfide/N‐doped carbon nanotubes (NCNT) hybrid electrocatalyst is fabricated via a two‐step synthesis. The uniquely designed synthesis leads to the material morphology featuring a core–shell structure, in which the crystalline metal phosphide core is surrounded by an amorphous phosphosulfide nanoshell. Notably, due to the favorable modification of chemical composition and surface properties, core–shell CoP@PS/NCNT exhibits the noticeable HER activity of approximately ?80 mV @ ?10 mA cm^?2 with excellent durability, which is one of the highest active nonnoble metal electrocatalysts ever reported thus far.     

Wrinkled Rh2P Nanosheets as Superior pH‐Universal Electrocatalysts for Hydrogen Evolution Catalysis

Searching for highly efficient and durable electrocatalysts for the hydrogen evolution reaction (HER) that function effectively at all pHs is of great interest to the scientific community, however it is still a grand challenge, because the HER kinetics of Pt in alkaline solutions are approximately two to three orders of magnitude lower than that in acidic solution. Herein, a new class of wrinkled, ultrathin Rh₂P nanosheets for enhancing HER catalysis at all pHs is reported. They exhibit a small overpotential of 18.3 mV at 10 mA cm^?2, low Tafel slope of 61.5 mV dec^?1, and good durability in alkaline media, much better than the commercial Pt/C catalyst. Density functional theory calculations reveal that the active open‐shell effect from the P‐3p band not only promotes Rh‐4d for increased proton–electron charge exchange but also provides excellent p–p overlapping to locate the O‐related species as distributary center, which can benefit the HER process in alkaline media. It is also demonstrated that the present wrinkled, ultrathin Rh₂P nanosheets are highly efficient and durable electrocatalysts toward HER in both acid and neutral electrolytes. The present work opens a new material design for ultrathin 2D metal phosphide nanostructures for the purpose of boosting HER performance at all pHs.     

Ni Strongly Coupled with Mo2C Encapsulated in Nitrogen‐Doped Carbon Nanofibers as Robust Bifunctional Catalyst for Overall Water Splitting

It is urgently required to develop highly efficient and stable bifunctional non‐noble metal electrocatalysts for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) for water splitting. In this study, a facile electrospinning followed by a post‐carbonization treatment to synthesize nitrogen‐doped carbon nanofibers (NCNFs) integrated with Ni and Mo₂C nanoparticles (Ni/Mo₂C‐NCNFs) as water splitting electrocatalysts is developed. Owing to the strong hydrogen binding energy on Mo₂C and high electrical conductivity of Ni, synergetic effect between Ni and Mo₂C nanoparticles significantly promote both HER and OER activities. The optimized hybrid (Ni/Mo₂C(1:2)‐NCNFs) delivers low overpotentials of 143 mV for HER and 288 mV for OER at a current density of 10 mA cm^?2. An alkaline electrolyzer with Ni/Mo₂C(1:2)‐NCNFs as catalysts for both anode and cathode exhibits a current density of 10 mA cm^?2 at a voltage of 1.64 V, which is only 0.07 V larger than the benchmark of Pt/C‐RuO₂ electrodes. In addition, an outstanding long‐term durability during 100 h testing without obvious degradation is achieved, which is superior to most of the noble‐metal‐free electrocatalysts reported to date. This work provides a simple and effective approach for the preparation of low‐cost and high‐performance bifunctional electrocatalysts for efficient overall water splitting.     

General Synthesis of Ultrathin Metal Borate Nanomeshes Enabled by 3D Bark‐Like N‐Doped Carbon for Electrocatalysis

Ultrathin nanomeshes perfectly inherit the integrated advantages of ultrathin 2D materials and porous nanostructures, which have shown their great application potential in catalysis and electronic devices. Here, the general synthesis of ultrathin metal borate (i.e., Co‐B_i, Ni‐B_i, and Fe‐B_i) nanomeshes is reported by capitalizing on 3D bark‐like N‐doped carbon (denoted BNC) as nanoreactors. Indeed, this strategy is straightforward, only comprising a one‐step reaction between metal cations and sodium borohydride without using templates. As nanoreactors, the BNC derived from biomass waste of lychee exocarp possesses distinctive advantages of low cost, fractured textures, porous nanostructures (surface area: 1915.5 m² g^?1), electronegative surface (zeta potential: ?43.4 mV), and superhydrophilicity for greatly facilitating the adsorption of metal cations with strong strength to effectively control the growth of 2D nanomeshes. The as‐synthesized Co‐B_i and Ru‐doped Co‐B_i (Ru‐Co‐B_i) nanomeshes exhibit excellent performance for the oxygen evolution reaction and hydrogen evolution reaction, respectively. Impressively, the water splitting device based on the Co‐B_i and Ru‐Co‐B_i nanomeshes can enable a current density of 10 mA cm^?2 at a small cell voltage of 1.53 V. Therefore, this work paves new avenues for the facile synthesis of ultrathin metal nanomeshes.     

Highly Efficient Oxygen Evolution by a Thermocatalytic Process Cascaded Electrocatalysis Over Sulfur‐Treated Fe‐Based Metal–Organic‐Frameworks

The oxygen evolution reaction (OER) is a bottleneck process for water splitting and finding highly efficient, durable, low‐cost, and earth‐abundant electrocatalysts is still a major challenge. Here a sulfur‐treated Fe‐based metal–organic‐framework is reported as a promising electrocatalyst for the OER, which shows a low overpotential of 218 mV at the current density of 10 mA cm^?2 and exhibits a very low Tafel slope of 36.2 mV dec^?1 at room temperature. It can work on high current densities of 500 and 1000 mA cm^?2 at low overpotentials of 298 and 330 mV, respectively, by keeping 97% of its initial activity after 100 h. Notably, it can achieve 1000 mA cm^?2 at 296 mV with a good stability at 50 °C, fully fitting the requirements for large‐scale industrial water electrolysis. The high catalytic performance can be attributed to the thermocatalytic processes of H⁺ capture by –SO₃ groups from *OH or *OOH species, which cascades to the electrocatalytic pathway and then significantly reduces the OER overpotentials.     

An Efficient and Earth‐Abundant Oxygen‐Evolving Electrocatalyst Based on Amorphous Metal Borides

Cost‐effective and efficient oxygen‐evolving electrocatalysts are urgently required for energy storage and conversion technologies. In this work, an amorphous trimetallic boride nanocatalyst (Fe–Co–2.3Ni–B) prepared by a simple approach is reported as a highly efficient oxygen evolution reaction electrocatalyst. It exhibits an overpotential (η) of 274 mV to deliver a geometric current density (j_geo) of 10 mA cm^?2, a small Tafel slope of 38 mV dec^?1, and excellent long‐term durability at a mass loading of 0.3 mg cm^?2. The impressive electrocatalytic performance originates from the unique amorphous multimetal–metalloid complex nanostructure. From application's point of view, this work holds great promise as this process is simple and allows for large‐scale production of cheap, yet efficient, material.     

From Water Oxidation to Reduction: Homologous Ni–Co Based Nanowires as Complementary Water Splitting Electrocatalysts

A homologous Ni–Co based nanowire system, consisting of both nickel cobalt oxide and nickel cobalt sulfide nanowires, is developed for efficient, complementary water splitting. The spinel‐type nickel cobalt oxide (NiCo₂O₄) nanowires are hydrothermally synthesized and can serve as an excellent oxygen evolution reaction catalyst. Subsequent sulfurization of the NiCo₂O₄ nanowires leads to the formation of pyrite‐type nickel cobalt sulfide (Ni_0.33Co_0.67S₂) nanowires. Due to the 1D nanowire morphology and enhanced charge transport capability, the Ni_0.33Co_0.67S₂ nanowires function as an efficient, stable, and robust nonnoble metal electrocatalyst for hydrogen evolution reaction (HER), substantially exceeding CoS₂ or NiS₂ nanostructures synthesized under similar methods. The Ni_0.33Co_0.67S₂ nanowires exhibit low onset potential of ?65, ?39, and ?50 mV versus reversible hydrogen electrode, Tafel slopes of 44, 68, and 118 mV dec^?1 at acidic, neutral, and basic conditions, respectively, and excellent stability, comparable to the best reported non‐noble metal‐based HER catalysts. Furthermore, the homologous Ni_0.33Co_0.67S₂ nanowires and NiCo₂O₄ nanowires are assembled into an all‐nanowire based water splitting electrolyzer with a current density of 5 mA cm^?2 at a voltage as 1.65 V, thus suggesting a unique homologous, earth abundant material system for water splitting.     

Multifunctional Single‐Crystallized Carbonate Hydroxides as Highly Efficient Electrocatalyst for Full Water splitting

The controllable synthesis of single‐crystallized iron‐cobalt carbonate hydroxide nanosheets array on 3D conductive Ni foam (FCCH/NF) as a monolithic oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) bifunctional electrocatalyst for full water splitting is described. The results demonstrate that the incorporation of Fe can effectively tune the morphology, composition, electronic structure, and electrochemical active surface area of the electrocatalysts, thus greatly enhancing the intrinsic electrocatalytic activity. The optimal electrocatalyst (F_0.25C₁CH/NF) can deliver 10 and 1000 mA cm^?2 at very small overpotentials of 77 and 256 mV for HER and 228 and 308 mV for OER in 1.0 m KOH without significant interference from gas evolution. The F_0.25C₁CH‐based two‐electrode alkaline water electrolyzer only requires cell voltages of 1.45 and 1.52 V to achieve current densities of 10 and 500 mA cm^?2. The results demonstrate that such fascinating electrocatalytic activity can be ascribed to the increase in the catalytic active surface area, facilitated electron and mass transport properties, and the synergistic interactions because of the incorporation of Fe.