Development of synovial joints

Synovial joints arise through two main processes. In long bone elements, cartilaginous differentiation occurs across the locations of the prospective joints that then segment secondarily. This process occurs through the development of a noncartilaginous region known as the interzone. The interzone becomes an important signaling center to the opposing elements, which can regulate growth through such factors as GDF-5. The interzone also expresses bone morphogenetic proteins (BMPs) and their antagonists, such as noggin. Overexpression of BMPs, or the loss of noggin leads to joint fusions. The interzone also expresses Wnt-14, which appears to be specific for this region in the developing anlagen, and regulates its nonchondrogenic nature. Cavitation of the joint follows, driven by selective high-level synthesis of hyaluronan by interzone cells and presumptive synovial cells. In addition, as the interzone disperses during cavity enlargement, data are now accruing that suggest that both the synovium and articular cartilage develop from this population. Finally, the development of articular cartilage progresses through appositional growth driven by a progenitor/stem cell subpopulation that resides in the articular surface. The individual elements of the skeleton are connected together at regions termed joints or articulations. Classically, there are three broad categories of joints: immovable joints (syntharthroses); mixed articulations, in which the range of movement is limited (amphiarthroses); and the movable, or synovial, joints (diarthroses). This review concentrates on the development of the synovial joints.     

Finite element analysis of the temporomandibular joint during lateral excursions of the mandible

One of the most significant characteristics of the temporomandibular joint (TMJ) is that it is in fact composed of two joints. Several finite element simulations of the TMJ have been developed but none of them analysed the different responses of its two sides during nonsymmetrical movement. In this paper, a lateral excursion of the mandible was introduced and the biomechanical behaviour of both sides was studied. A three-dimensional finite element model of the joint comprising the bone components, both articular discs, and the temporomandibular ligaments was used. A fibre-reinforced porohyperelastic model was introduced to simulate the behaviour of the articular discs, taking into account the orientation of the fibres in each zone of these cartilage components. The mandible movement during its lateral excursion was introduced as the loading condition in the analysis. As a consequence of the movement asymmetry, the discs were subjected to different load distributions. It was observed that the maximal shear stresses were located in the lateral zone of both discs and that the lateral attachment of the ipsilateral condyle-disc complex suffered a large distortion, due to the compression of this disc against the inferior surface of the temporal bone. These results may be related with possible consequences of a common disorder called bruxism. Although it would be necessary to perform an exhaustive analysis of this disorder, including the contact forces between the teeth during grinding, it could be suggested that a continuous lateral movement of the jaw may lead to perforations of both discs in their lateral part and may damage the lateral attachments of the disc to the condyle.     

Response properties of thick myelinated group II afferents in the medial articular nerve of normal and inflamed knee joints of the cat.

This study investigated the responses to innocuous and noxious mechanical stimuli of joint mechanoreceptors with thick myelinated articular afferents (conduction velocities 21-65 m/sec) in the medial articular nerve of the cat's knee. In nine experiments, we examined whether acute arthritis would modify the discharge properties. The vast majority of the group II afferents were excited by gentle local stimuli and by movements in the working range of the knee. Although they encoded pressure and particular movement stimuli up to the noxious range, their responses were more closely related to the particular type of stimulus (e.g., a movement in a specific direction) than to its intensity (innocuous vs. noxious). In inflamed joints, the response patterns of group II units were similar with regard to local mechanical thresholds, thresholds for passive movements, and patterns of responses to passive movements. In both situations, most units had no resting activity. These results suggest that articular group II afferents do not play a significant role in nociception. Rather, they subserve proprioceptive functions such as deep pressure sensation and kinesthesia in normal as well as inflamed joints.     

Evolution of nubbin function in hemimetabolous and holometabolous insect appendages

Insects display a whole spectrum of morphological diversity, which is especially noticeable in the organization of their appendages. A recent study in a hemipteran, Oncopeltus fasciatus (milkweed bug), showed that nubbin (nub) affects antenna morphogenesis, labial patterning, the length of the femoral segment in legs, and the formation of a limbless abdomen. To further determine the role of this gene in the evolution of insect morphology, we analyzed its functions in two additional hemimetabolous species, Acheta domesticus (house cricket) and Periplaneta americana (cockroach), and re-examined its role in Drosophila melanogaster (fruit fly). While both Acheta and Periplaneta nub-RNAi first nymphs develop crooked antennae, no visible changes are observed in the morphologies of their mouthparts and abdomen. Instead, the main effect is seen in legs. The joint between the tibia and first tarsomere (Ta-1) is lost in Acheta, which in turn, causes a fusion of these two segments and creates a chimeric nub-RNAi tibia–tarsus that retains a tibial identity in its proximal half and acquires a Ta-1 identity in its distal half. Similarly, our re-analysis of nub function in Drosophila reveals that legs lack all true joints and the fly tibia also exhibits a fused tibia and tarsus. Finally, we observe a similar phenotype in Periplaneta except that it encompasses different joints (coxa–trochanter and femur–tibia), and in this species we also show that nub expression in the legs is regulated by Notch signaling, as had previously been reported in flies and spiders. Overall, we propose that nub acts downstream of Notch on the distal part of insect leg segments to promote their development and growth, which in turn is required for joint formation. Our data represent the first functional evidence defining a role for nub in leg segmentation and highlight the varying degrees of its involvement in this process across insects.     

Glenohumeral joint cartilage contact in the healthy adult during scapular plane elevation depression with external humeral rotation

The shoulder (glenohumeral) joint has the greatest range of motion of all human joints; as a result, it is particularly vulnerable to dislocation and injury. The ability to non-invasively quantify in-vivo articular cartilage contact patterns of joints has been and remains a difficult biomechanics problem. As a result, little is known about normal in-vivo glenohumeral joint contact patterns or the consequences that surgery has on altering them. In addition, the effect of quantifying glenohumeral joint contact patterns by means of proximity mapping, both with and without cartilage data, is unknown. Therefore, the objectives of this study are to (1) describe a technique for quantifying in-vivo glenohumeral joint contact patterns during dynamic shoulder motion, (2) quantify normal glenohumeral joint contact patterns in the young healthy adult during scapular plane elevation depression with external humeral rotation, and (3) compare glenohumeral joint contact patterns determined both with and without articular cartilage data. Our results show that the inclusion of articular cartilage data when quantifying in-vivo glenohumeral joint contact patterns has significant effects on the anterior–posterior contact centroid location, the superior–inferior contact centroid range of travel, and the total contact path length. As a result, our technique offers an advantage over glenohumeral joint contact pattern measurement techniques that neglect articular cartilage data. Likewise, this technique may be more sensitive than traditional 6-Degree-of-Freedom (6-DOF) joint kinematics for the assessment of overall glenohumeral joint health. Lastly, for the shoulder motion tested, we found that glenohumeral joint contact was located on the anterior–inferior glenoid surface.     

Biomechanics of the joints of the large toe. Shape and movement of the first tarsometatarsal joint and of the medial cuneonavicular joint]

90% of the first (hallucal) tarsometatarsal joints are screw-shaped; the axis is directed upwards to the front touching the lateral edge of the joint. Thus the plantar flexion is inevitably accompanied by an adduction and a pronation, and vice versa a dorsiflexion is consequently accompanied by an abduction and a supination, when the articular surfaces exactly slide along each other. 10% of these joints, however, are ellipsoid-shaped; in this case the distal articular surface of the medial cuneiform bone has the form of an ovoid head, and a strong ligament situated next to the lateral edge of the joint effects the same kind of motion described above. The medial cuneonavicular joint is always ellipsoid-shaped, the head of which is made up by the medial facet of the distal articular surface of the navicular bone. Each of the two joints mentioned has a considerable range of mobility.     

Extra tarsal joints and abnormal cuticular polarities in various mutants ofDrosophila melanogaster

Summary The legs of flies from 16 different mutant strains ofDrosophila melanogaster were examined for abnormal cuticular polarities and extra joints. The strains were chosen for study because they manifest abnormal cuticular polarities in some parts of the body (10 strains) or because they have missing or defective tarsal joints (6 strains). All but three of the stocks were found to exhibit misorientations of either the bristles, hairs, or “bract-socket vectors” on the legs. The latter term denotes an imaginary vector pointing from a hairlike structure called a “bract” to the bristle socket with which it is associated. On the legs of wild-type flies nearly all such vectors point distally, as do the bristles and hairs. In the mutant flies, the most common vector misorientation is a 180° reversal. When the bract-socket vectors of adjacent bristle sites in the same bristle row point toward one another, the distance between the sites is frequently abnormally large, whereas when the vectors point in opposite directions, the interval is frequently abnormally small. This correlation is interpreted to mean that bristle cells actively repel one another via cytoplasmic extensions that are longer in the direction of the bract-socket vector than in the opposite direction. Repulsive forces of this kind may be responsible for “fine-tuning” the regularity of bristle spacing in wild-type flies. Extra tarsal joints were found in eight of the 16 strains. A ninth strain completely lacking tarsal joints appears in some cases to have an extra tibia-basitarsus joint in its tibia. Whereas the tarsi of wild-type flies contain four joints, the tarsi ofspiny legs mutant flies contain as many as eight joints. In this extreme extra-joint phenotype, four of the joints correspond to the normal wild-type joints, and there is an extra joint in every tarsal segment except the distal-most (fifth) segment. Nearly all such ectopic extra joints have inverted polarity. In other strains the extra tarsal joints are located mainly at the wild-type joint sites, and joints of this sort have wild-type polarity. The alternation of normal and inverted (extra) joints inspiny legs resembles the alternation of normal and inverted (extra) body segment boundaries in the embryonic-lethal mutantpatch, suggesting that tarsal and body segmentation may share a common patterning mechanism.     

Three-dimensional kinematic analysis of influence of hand orientation and joint limits on the control of arm postures and movements

The problems related to kinematic redundancy in both task and joint space were investigated for arm prehension movements in this paper. After a detailed analysis of kinematic redundancy of the arm, it is shown that the redundancy problem is ill posed only for the control of hand orientation. An experiment was then designed to investigate the influence of hand orientation on the control of arm movements. Since movements must be made within the limits of the joints, the influence of these limits was also analyzed quantitatively. The results of the experiment confirm that the increase of movement time because of the change of object orientation is due to the lengthening of the deceleration phase disproportionately to the rest of the movement. The variation of hand path due to the change of object orientation was observed as being surprisingly small for some subjects as opposed to the large range of object orientation, implying that hand path and hand orientation could be controlled separately, thus simplifying the computational problem of inverse kinematics. Moreover, the observations from the present experiment strongly suggest that a functional segmentation of the proximal and distal joints exists and that the control of wrist motion is dissociated from the rest of joint motions. The contribution of each joint in the control of arm movements could be determined through the principle of minimum energy and minimum discomfort under the constraints of the joint limits. A simplified inverse kinematics model was tested. It shows that these hypotheses can be easily implemented in a geometric algorithm and be used to predict arm prehension postures reasonably well under the constraints of joint limits. Received: 6 August 1998 / Accepted in revised form: 16 December 1998     

A constraint-based approach to modelling the mobility of the human knee joint

A model of knee mobility able to predict the range and pattern of movement in the unloaded joint was proposed by Wilson et al. (J. Biomech. 31 (1998) 1127-1136). The articular surfaces in the lateral and medial compartments and isometric fascicles in three of the knee ligaments were represented as five constraints on motion between the femur and tibia in a single degree-of-freedom parallel spatial mechanism. The path of movement of the bones during passive flexion was found by solving the forward kinematics of the mechanism using an iterative method. The present paper shows that such a mechanism-based solution approach can lead to an underestimation of the flexion range. This is due to the mechanism reaching a 'stationary configuration' and 'locking'. A new, constraint-based approach to the solution of the model joint displacement is proposed. It avoids the representation of ligaments and articular surfaces by kinematically equivalent chains of one degree-of-freedom pairs which are prone to singularities. It relies instead on a numerical solution of five non-linear constraint equations to find the relative positions of the bones at a series of flexion angles. The method is successful both in its ability to predict motion through a physiological range and in its efficiency with a solution rate forty times faster than the original algorithm. The new approach may be extended to include more complex joint surface geometry, allowing a study of the effects of articular surface shape and ligament arrangement on joint kinematics.     

Measuring 3D Hand and Finger Kinematics—A Comparison between Inertial Sensing and an Opto-Electronic Marker System

Objective analysis of hand and finger kinematics is important to increase understanding of hand function and to quantify motor symptoms for clinical diagnosis. The aim of this paper is to compare a new 3D measurement system containing multiple miniature inertial sensors (PowerGlove) with an opto-electronic marker system during specific finger tasks in three healthy subjects. Various finger movements tasks were performed: flexion, fast flexion, tapping, hand open/closing, ab/adduction and circular pointing. 3D joint angles of the index finger joints and position of the thumb and index were compared between systems. Median root mean square differences of the main joint angles of interest ranged between 3.3 and 8.4deg. Largest differences were found in fast and circular pointing tasks, mainly in range of motion. Smallest differences for all 3D joint angles were observed in the flexion tasks. For fast finger tapping, the thumb/index amplitude showed a median difference of 15.8mm. Differences could be explained by skin movement artifacts caused by relative marker movements of the marker system, particularly during fast tasks; large movement accelerations and angular velocities which exceeded the range of the inertial sensors; and by differences in segment calibrations between systems. The PowerGlove is a system that can be of value to measure 3D hand and finger kinematics and positions in an ambulatory setting. The reported differences need to be taken into account when applying the system in studies understanding the hand function and quantifying hand motor symptoms in clinical practice.     

Cell- and tissue-based approaches for cartilage repair

Damage and degeneration of articular joints is a major healthcare concern, due to the association of joint disease with ageing, the current strong demographic changes in the proportion of elderly in the population, and the increased incidence of trauma in a sports-active younger population. These joints are biomechanical organs that transmit load between bones in our skeleton, and the articular cartilage forms a load-bearing surface that covers the bone within the joints. All the forces across the joints are thus transmitted through the cartilage, and it therefore makes an important biomechanical contribution to joint function. The cartilage is particularly prone to damage, and has limited capacity for natural repair. Although joint replacement is successful, it is less so in younger patients. For these patients, there is currently great interest in developing cell-based treatments for the biological repair of articular cartilage.     

Functional anatomy of the hand of Australopithecus africanus

The Sterkfontein hand bones, attributed to Australopithecus africanus, were analysed to determine potential hand function of the power grip type of this species. The metacarpus is as stable as that of modern humans, as indicated by the depth of the groove on the base of metacarpal 2, the styloid process of metacarpal 3, the base articular surface areas, and the ligament markings on the bases of the metacarpals. The flexion and rotation of metacarpal 5 might have been less than that of modern humans, due to a more marked ventral articular lip on the base. The metacarpus acts as a lever, acting in various planes. The extensor carpi ulnaris and extensor carpi radialis longus muscles were probably better developed than in modern humans. The extensor carpi radialis brevis and flexor carpi radialis muscles would probably have been as well developed as in modern humans. None of the long tendons have a mechanical disadvantage as compared to modern humans. The metacarpals have a high robusticity index. The proximal phalanges show some midshaft swelling, slightly greater curvature than in modern humans, and some side to side bowing: pongid features. The fibrous flexor sheath markings are well developed, but resemble those of modern humans rather than those of the pongids. A single middle phalanx resembles that of modern humans, and has well developed ridges for insertion of the flexor digitorum superficialis muscle. The distal phalanx of the thumb has a well developed region for insertion of the flexor pollicis longus muscle, and has a mechanical advantage over modern humans for action of this muscle at the interphalangeal joint. The features indicate that the hand of A. africanus was well adapted to powerful hand use, as in hammering, striking, chopping, scraping, and gouging actions, as well as for throwing and climbing activities.     

Coordination of thumb joints during opposition

Thumb opposition plays a vital role in hand function. Kinematically, thumb opposition results from composite movements from multiple joints moving in multiple directions. The purpose of this study was to examine the coordination of thumb joints during opposition tasks. A total of 15 female subjects with asymptomatic hands were studied. Three-dimensional angular kinematics of the carpometacarpal (CMC), metacarpophalangeal (MCP) and interphalangeal (IP) joints were obtained by a marker-based motion analysis system. Thumb opposition revealed coordination among joints in a specific direction (inter-joint coordination) and among different directions within a joint (intra-joint coordination). In particular, linear couplings existed between the flexion and pronation at the CMC joint, and between the flexion of the CMC joint and flexion of the MCP joint. Principal component analysis showed that only two principal components adequately represented the thumb opposition data of seven movement directions. A term functional degrees of freedom by virtue of principal component analysis was proposed to uncover the extent of movement coordination in functional tasks.     

Congruency Effects on Load Bearing in Diarthrodial Joints

Modelling load bearing in diarthrodial joints is challenging, due to the complexity of the materials, the boundary and interface conditions and the geometry. The articulating surfaces are covered with cartilage layers that are filled with a fluid that plays a major role in load bearing [Mow, V.C., Holmes, M.H., Lai, W.M. (1984) “Survey article: fluid transport and mechanical properties of articular cartilage: a review”, Journal of Biomechanics 17(5), 377–394]. Researchers have tended to approximate joint geometry using axisymmetry [Donzelli, P.S., Spilker, R.L., Ateshian, G.A., Mow, V.C. (1999) “Contact analysis of biphasic transversely isotropic cartilage layers and correlations with tissue failure”, Journal of Biomechanics 32, 1037–1047], often with a rounded upper articulating surface, creating a form of Hertz problem [Donzelli, P.S., Spilker, R.L., Ateshian, G.A., Mow, V.C. (1999) “Contact analysis of biphasic transversely isotropic cartilage layers and correlations with tissue failure”, Journal of Biomechanics 32, 1037–1047]. However, diarthrodial joints (shoulder, hip and knee) are equipped with peripheral structures (glenoid labrum, acetabular labrum and meniscus, respectively) that tend to deepen the joint contact and thus cause initial contact to be established at the periphery of the joint rather than “centrally”. The surface geometries are purposefully incongruent, and the incongruency has a significant effect on the stresses, pressures and pressure gradients inside the tissue. The models show the importance of the peripheral structures and the incongruency from a load-bearing perspective. Joint shapes must provide a compromise between demands for load-bearing, lubrication and the supply of nutrients to the chondrocytes of the cartilage and cells of the peripheral structures. Retention and repair of the functionality of these peripheral structures should be a prime consideration in any surgical treatment of an injured joint.     

Variation in human limb joint articular morphology

Objectives

Synovial joints in human limbs strike a balance between mobility, stability, and articular fit, yet little is known about how these conflicting demands pattern intraspecific variation in articular shape. In this study, we use geometric morphometrics to establish the apportionment and magnitude of morphological variance of the articular surfaces of the human shoulder, elbow, hip, and knee. We hypothesize that variances will be comparable between articulating surfaces within a joint and will be larger in joints with smaller ranges of motion, given their plurality of functional demands.

Materials and Methods

Three-dimensional landmarks were taken on the articular surfaces of the glenohumeral, humeroulnar, acetabulofemoral, and tibiofemoral joints from CT scans of 200 skeletons from the University of Tennessee Donated Skeletal Collection (84 females, 116 males). Root mean-squared distances between articulations calculated from Procrustes shape coordinates were used to determine variance distributions.

Results

We found no difference in variances for each articular surface between the sexes or between left and right articular surfaces. A high range of motion is associated with greater morphological variance; however, this pattern is largely driven by the concave articular surfaces of each joint, which consistently exhibit statistically greater variance than their convex counterparts.

Discussion

The striking pattern of differential variance between articulating morphologies points to potential disparities in development between them. Consistently higher variance in concave surfaces may relate to chondral modeling theory for the formation of joints. Establishing intraspecific morphological variance patterns is a first step in understanding coordinated evolution among articular features.     

The contribution of the wrist, elbow and shoulder joints to single-finger tapping

We aimed to determine the role of the wrist, elbow and shoulder joints to single-finger tapping. Six human subjects tapped with their index finger at a rate of 3 taps/s on a keyswitch across five conditions, one freestyle (FS) and four instructed tapping strategies. The four instructed conditions were to tap on a keyswitch using the finger joint only (FO), the wrist joint only (WO), the elbow joint only (EO), and the shoulder joint only (SO). A single-axis force plate measured the fingertip force. An infra-red active-marker three-dimensional motion analysis system measured the movement of the fingertip, hand, forearm, upper arm and trunk. Inverse dynamics estimated joint torques for the metacarpal-phalangeal (MCP), wrist, elbow, and shoulder joints. For FS tapping 27%, 56%, and 18% of the vertical fingertip movement were a result of flexion of the MCP joint and wrist joint and extension of the elbow joint, respectively. During the FS movements the net joint powers between the MCP, wrist and elbow were positively correlated (correlation coefficients between 0.46 and 0.76) suggesting synergistic efforts. For the instructed tapping strategies (FO, WO, EO, and SO), correlations decreased to values below 0.35 suggesting relatively independent control of the different joints. For FS tapping, the kinematic and kinetic data indicate that the wrist and elbow contribute significantly, working in synergy with the finger joints to create the fingertip tapping task.     

Experimental transplantation of small joints by microvascular anastomoses.

Metacarpophalangeal joints in dogs were transplanted with microvascular anastomoses. Some were transplanted as half-joints, others as whole joints, and these dogs were followed for up to 5 1/2 months. When a half-joint was transplanted within the foot, the joint movement became restricted but the vascularized half-joints were well preserved with only slight damage and well-preserved epiphyseal plates--compared to severe damage of the articular cartilage and destruction of the epiphyseal plates in the non-vascularized joint transplants. Vascularized whole joint transplants within the foot were indistinguishable macroscopically and microscopically from normal joints, and they had only a slight restriction of joint movement. They took up tetracycline from the circulation, demonstrating their viability.     

Considerations on Joint and Articular Cartilage Mechanics

When studying joint degeneration leading to osteoarthritis (OA), it seems imperative that local joint tissue loading is known during normal everyday movement and that the adaptive/degenerative effects of this loading are quantified systematically. Philosophically, we believe the best way to approach this problem is by studying joint degeneration and osteoarthritis in long-term experimental models and by representing diarthrodial joints and the associated tissues with accurate, geometric and structural, theoretical models. Here, we present selected examples of our work representing this approach. Experimentally, we demonstrate that the local loading of joints changes continuously in experimental models of OA, not only because of the changing external and internal loading, but also because of the continuous alterations in joint contact geometry and tissue mechanical properties. Furthermore, we show that single bouts of joint loading affect gene expression, and that gene expression, as well as subsequent joint degeneration is site-specific. In fact, opposing articular surfaces that are exposed to the same loading may degenerate at completely different rates. Finally, we propose a series of theoretical models of articular cartilage and contact mechanics, demonstrating that many of the anisotropic and inhomogeneous properties can be explained by structural elements and their orientation and volumetric concentration across the tissue.     

Congruency effects on load bearing in diarthrodial joints

Modelling load bearing in diarthrodial joints is challenging, due to the complexity of the materials, the boundary and interface conditions and the geometry. The articulating surfaces are covered with cartilage layers that are filled with a fluid that plays a major role in load bearing [Mow, V.C., Holmes, M.H., Lai, W.M. (1984) "Survey article: fluid transport and mechanical properties of articular cartilage: a review", Journal of Biomechanics 17(5), 377-394]. Researchers have tended to approximate joint geometry using axisymmetry [Donzelli, P.S., Spilker, R.L., Ateshian, G.A., Mow, V.C. (1999) "Contact analysis of biphasic transversely isotropic cartilage layers and correlations with tissue failure", Journal of Biomechanics 32, 1037-1047], often with a rounded upper articulating surface, creating a form of Hertz problem [Donzelli, P.S., Spilker, R.L., Ateshian, G.A., Mow, V.C. (1999) "Contact analysis of biphasic transversely isotropic cartilage layers and correlations with tissue failure", Journal of Biomechanics 32, 1037-1047]. However, diarthrodial joints (shoulder, hip and knee) are equipped with peripheral structures (glenoid labrum, acetabular labrum and meniscus, respectively) that tend to deepen the joint contact and thus cause initial contact to be established at the periphery of the joint rather than "centrally". The surface geometries are purposefully incongruent, and the incongruency has a significant effect on the stresses, pressures and pressure gradients inside the tissue. The models show the importance of the peripheral structures and the incongruency from a load-bearing perspective. Joint shapes must provide a compromise between demands for load-bearing, lubrication and the supply of nutrients to the chondrocytes of the cartilage and cells of the peripheral structures. Retention and repair of the functionality of these peripheral structures should be a prime consideration in any surgical treatment of an injured joint.     

Spinal arthritis and physical stress at Bronze Age Harappa

This study examines joint changes in the vertebral skeleton in human remains excavated in 1987 and 1988 at Bronze Age Harappa, an urban center of the Indus Valley civilization. The sample consists of 23 complete skeletons from primary burial context, the partial remains of more than 69 other individuals, and hundreds of skeletal elements from secondary context, totalling 3,084 vertebral joint margins and articular surfaces. Marginal bone proliferation, pitting of articular surfaces, eburnation, and ankylosis were scored macroscopically for vertebral body margins and surfaces and posterior apophyseal facet joints. Marginal lipping is far more prevalent on the vertebral bodies than on the apophyseal facets and surface pitting is also more frequent on vertebral bodies although its expression is relatively low overall. Cervical vertebrae in this sample exhibit the same amount of marginal new bone and much more surface pitting of the vertebral bodies than do either thoracic or lumbar vertebrae; the cervical segment also exhibits the most severe expressions of both types of lesions. In addition, although the frequencies of cervical and lumbar posterior facet involvement are similar, the cervical facets exhibit much more severe lipping as well as the only cases of eburnation and ankylosis. Pitting of the posterior facets is most common in the lumbar segment, but the cervical examples are the only severe cases. It is proposed that the severe joint changes in the cervical spine result from trauma, perhaps accumulated microtrauma from activity stresses. There are no age or sex associated patterns in the frequency of arthritis although this result may be influenced by the small proportions of the total sample for which age and sex could be determined. © 1994 Wiley-Liss, Inc.