Immobilization of Candida rugosa lipase by cross-linking with glutaraldehyde followed by entrapment in alginate beads

Candida rugosa lipase was immobilized by first cross-linking with glutaraldehyde and then entrapping in calcium alginate beads. The presence of 2-propanol during cross-linking markedly improved the enzyme activity and activity recovery. Maximal enzyme activity (2.1?mmol?h^?1?g^?1 immobilized conjugate, wet weight) and activity recovery (117%) were observed at 30% (v/v) 2-propanol for hydrolysis of olive oil, which were 1.7 and 2.0 times higher than those of the immobilized enzyme prepared in the absence of 2-propanol. The half-life of the immobilized lipase prepared by entrapment after cross-linking in 30% 2-propanol was 1.6 times higher than that prepared by entrapment of the native lipase without cross-linking and 2-propanol pretreatment. The enantioselectivity of the former was 11 times higher than that of the latter for hydrolysis of racemic ketoprofen ethyl ester.     

Preparation of S-( )-ketoprofen by coupling the enantioselective hydrolysis of ketoprofen methyl ester with the photo-oxidation of methanol

A novel method for preparation of S-(+)-ketoprofen is presented involving coupling enantioselective hydrolysis of ketoprofen methyl ester catalyzed by a surfactant-coated-lipase with the photo-oxidation of methanol in a water-saturated organic solvent. The effect of photocatalytic conversion of methanol into water and carbon dioxide on the hydrolysis of ketoprofen methyl ester and the stability of the enzyme was investigated. The photo-oxidation of methanol shifted the equilibrium of the hydrolysis toward the formation of ketoprofen, increasing the equilibrium conversion ratio and improving the enantioselectivity. Because the surfactant-coated lipase and ketoprofen methyl ester dissolved in the organic solvent and ketoprofen was absorbed on the TiO₂ photocatalyst particles, the separation procedures could be simplified and the stability of the enzyme was increased.     

Preparation of S-(+)-ketoprofen by coupling the enantioselective hydrolysis of ketoprofen methyl ester with the photo-oxidation of methanol

A novel method for preparation of S-(+)-ketoprofen is presented involving coupling enantioselective hydrolysis of ketoprofen methyl ester catalyzed by a surfactant-coated-lipase with the photo-oxidation of methanol in a water-saturated organic solvent. The effect of photocatalytic conversion of methanol into water and carbon dioxide on the hydrolysis of ketoprofen methyl ester and the stability of the enzyme was investigated. The photo-oxidation of methanol shifted the equilibrium of the hydrolysis toward the formation of ketoprofen, increasing the equilibrium conversion ratio and improving the enantioselectivity. Because the surfactant-coated lipase and ketoprofen methyl ester dissolved in the organic solvent and ketoprofen was absorbed on the TiO₂ photocatalyst particles, the separation procedures could be simplified and the stability of the enzyme was increased.     

Impressive effect of immobilization conditions on the catalytic activity and enantioselectivity of Candida rugosa lipase toward S-Naproxen production

Candida rugosa lipase (CRL) was immobilized on Amberlite XAD 7 and the advantage of immobilization under the best reaction conditions in achieving high activity and enantioselectivity was shown for the hydrolysis of racemic Naproxen methyl ester. The performance of CRL was found to be better when the enzyme was immobilized at the temperature and pH values where higher conversion and enantioselectivity were obtained. The effects of immobilized lipase load, temperature, pH and substrate concentration on the conversion and enantioselectivity toward S-Naproxen production in aqueous phase/isooctane biphasic batch system were also evaluated. The increase in immobilized lipase load in 320–800 U/mL range increased the conversion of the substrate and enantioselectivity for S-Naproxen. The kinetic resolution of racemic Naproxen methyl ester conducted at the temperatures of 40, 45 and 50 °C and at the pH values of 4, 6, 7.5 and 9 resulted in the highest conversion and enantioselectivity at 45 °C and pH 6. Higher concentration of racemic Naproxen methyl ester than 10 mg/mL decreased both the conversion and enantioselectivity. CRL, which was immobilized at the temperature and pH values where the enzyme was more enantioselective, was successfully used in three successive batch runs each of 180 h. The highest enantiomeric ratio achieved in the S-Naproxen production was 174.2 with the conversion of 49%.     

Enantioselective synthesis of (S)‐naproxen using immobilized lipase on chitosan beads

S‐naproxen by enantioselective hydrolysis of racemic naproxen methyl ester was produced using immobilized lipase. The lipase enzyme was immobilized on chitosan beads, activated chitosan beads by glutaraldehyde, and Amberlite XAD7. In order to find an appropriate support for the hydrolysis reaction of racemic naproxen methyl ester, the conversion and enantioselectivity for all carriers were compared. In addition, effects of the volumetric ratio of two phases in different organic solvents, addition of cosolvent and surfactant, optimum pH and temperature, reusability, and inhibitory effect of methanol were investigated. The optimum volumetric ratio of two phases was defined as 3:2 of aqueous phase to organic phase. Various water miscible and water immiscible solvents were examined. Finally, isooctane was chosen as an organic solvent, while 2‐ethoxyethanol was added as a cosolvent in the organic phase of the reaction mixture. The optimum reaction conditions were determined to be 35 °C, pH 7, and 24 h. Addition of Tween‐80 in the organic phase increased the accessibility of immobilized enzyme to the reactant. The optimum organic phase compositions using a volumetric ratio of 2‐ethoxyethanol, isooctane and Tween‐80 were 3:7 and 0.1% (v /v/v), respectively. The best conversion and enantioselectivity of immobilized enzyme using chitosan beads activated by glutaraldehyde were 0.45 and 185, respectively.     

Immobilization of Candida rugosa lipase on glass beads for enantioselective hydrolysis of racemic Naproxen methyl ester

Candida rugosa lipase (CRL) was immobilized on glutaraldehyde-activated aminopropyl glass beads by using covalent binding method or sol-gel encapsulation procedure and improved considerably by fluoride-catalyzed hydrolysis of mixtures of RSi(OCH₃)₃ and Si(OCH₃)₄. The catalytic properties of the immobilized lipases were evaluated into model reactions, i.e. the hydrolysis of p-nitrophenylpalmitate (p-NPP). It has been observed that the percent activity yield of the encapsulated lipase was 166.9, which is 5.5 times higher than that of the covalently immobilized lipase. The enantioselective hydrolysis of racemic Naproxen methyl ester by immobilized lipase was studied in aqueous buffer solution/isooctane reaction system and it was noticed that particularly, the glass beads based encapsulated lipases had higher conversion and enantioselectivity compared to covalently immobilized lipase. In short, the study confirms an excellent enantioselectivity (E > 400) for the encapsulated lipase with an ee value of 98% for S-Naproxen.     

Overexpression of Serratia marcescens lipase in Escherichia coli for efficient bioresolution of racemic ketoprofen

Lipase from Serratia marcescens ECU1010 was cloned and overexpressed in E. coli. After optimization, the maximum lipase activities reached 5000–6000 U/l and this recombinant lipase could enantioselectively hydrolyze (S)-ketoprofen esters into (S)-ketoprofen. Among six alkyl esters of racemic ketoprofen investigated, this lipase showed the best enantioselectivity for the kinetic resolution of ketoprofen ethyl ester, with an ee_p (enantiomeric excess of product) of 91.6% and E-value of 63 obtained at 48.2% conversion. Twelve nonionic surfactants were tested for enhancing the enantioselectivity of this lipase in the bioresolution of ketoprofen ethyl ester. A very high E-value of 1084 was achieved, with an optical purity of >99% ee_p and a yield of 42.6% in the presence of 3% Brij 92V. Further studies showed that the selectivity of the lipase was improved with the increase of Brij 92V concentration. The substrate (ketoprofen ethyl ester) does not inhibit the lipase activity, while the product (S)-ketoprofen inhibits the lipase activity to some extent. These results indicate that the S. marcescens lipase is very useful for biocatalytic production of chiral profens such as (S)-ketoprofen.     

A Facile Method for Preparation of Polymerizable, Optically Active Ketoprofen Prodrug by Irreversible Lipase-catalysed Resolution

Summary An irreversible resolution of ketoprofen prodrug was developed by lipase-catalysed hydrolysis using corresponding vinyl ester as activated substrate in organic medium. The product obtained, (S)-ketoprofen vinyl ester would be used as a potential prodrug and a significant monomer for polymeric drug. Lipozyme^? immobilized from Mucor miehei showed the highest selectivity and activity after enzyme screening. The effect of solvent, water amount in the reaction medium and reaction temperature on the activity and enantioselectivity of Lipozyme^? was studied. Polymerizable, optically active ketoprofen prodrug could be obtained with excellent enantioselectivity (ee >99%, E ~ 400) in a mixture of dioxane/water (97.5/2.5, v/v) at 25 °C.     

Cloning and characterization of thermostable esterase from <Emphasis Type="Italic">Archaeoglobus fulgidus</Emphasis>

Thermostable esterase gene was cloned (Est-AF) from extremophilic microorganisms, Archaeoglobus fulgidus DSM 4304. The protein analysis result showed that Est-AF is monomer with total 247 amino acids and molecular weight of estimated 27.5 kDa. It also showed repeating units G-X-S-X-G (GHSLG) (residues 86 approximately 90) which is reported as active site of known esterases, and the putative catalytic triad composed of Ser88, Asp198 and His226. The esterase activity test with various acyl chain length of rho-nitrophenol resulted that Est-AF showed highest specific activity with rho-nitrophenylbutyrate (pNPC4) and rapidly decrease with rho-nitrophenyl ester contain more than 8 carbon chain. These results represent that cloned enzyme is verified as a carboxylesterase but not a lipase because esterase activity is decreased with rho-nitrophenyl ester contains more than 8 carbon chains but lipase activity does not affected with carbon chain length. Optimum temperature of esterase reaction with rho-nitrophenylbutyrate (pNPC4) was 80 degrees C. When ketoprofen ethyl ester was used as a substrate, activity of Est-AF showed the highest value at 70 degrees C, and 10% of activity still remains after 3 h of incubation at 90 degrees C. This result represents Est-AF has high thermostability with comparison of other esterases that have been reported. However, Est-AF showed low enantioselectivity with ketoprofen ethyl ester. Optimum pH of Est-AF is between pH 7.0 and pH 8.0. Km value of ketoprofen ethyl ester is 1.6 mM and, Vmax is 1.7 micromole/mg protein/min. Est-AF showed similar substrate affinity but slower reaction with ketoprofen ethyl ester compare with esterase from mesophilic strain P. fluorescens.     

Enantioselective enzymatic hydrolysis of racemic drugs by encapsulation in sol–gel magnetic sporopollenin

Candida rugosa lipase was encapsulated within a sol–gel procedure and improved considerably by fluoride-catalyzed hydrolysis of mixtures of octyltriethoxysilane and tetraethoxysilane in the presence of magnetic sporopollenin. The catalytic properties of the immobilized lipases were evaluated into model reactions, i.e., the hydrolysis of p-nitrophenylpalmitate (p-NPP), and the enantioselective hydrolysis of racemic naproxen methyl ester, mandelic acid methyl ester or 2-phenoxypropionic acid methyl ester that were studied in aqueous buffer solution/isooctane reaction system. The encapsulated magnetic sporopollenin (Spo-M-E) was found to give 319 U/g of support with 342% activity yield. It has been observed that the percent activity yields and enantioselectivity of the magnetic sporopollenin encapsulated lipase were higher than that of the encapsulated lipase without support. The substrate specificity of the encapsulated lipase revealed more efficient hydrolysis of the racemic naproxen methyl ester and 2-phenoxypropionic acid methyl ester than racemic mandelic acid methyl ester. It was observed that excellent enantioselectivity (E > 400) was obtained for encapsulated lipase with magnetic sporopollenin with an ee value of S-Naproxen and R-2 phenoxypropionic acid about 98%.     

Integration of purification with immobilization of Candida rugosa lipase for kinetic resolution of racemic ketoprofen

The two processes for the partial purification and for the immobilization of a crude lipase preparation (Candida rugosa Lipase OF) have been successfully integrated into one by simple adsorption of the enzyme onto a cation ion exchanger resin (SP-Sephadex C-50) at pH 3.5. Due to selective removal of the unfavorable lipase isoenzyme (L1), the enzyme components (mainly L2 and L3) that are tightly fixed on the resin displayed a significantly improved enantioselectivity (E value: 50 versus 13 with addition of Tween-80) in the biocatalytic hydrolysis of 2-chloroethyl ester of rac-ketoprofen. The activity yields of the immobilized lipase were 48 and 70%, respectively when emulsified and non-emulsified substrates were employed for enzyme assay. Moreover, the concentration of Tween-80 was found to be a factor affecting the lipase enantioselectivity. By using such an immobilized enzyme as biocatalyst, the process for preparing enantiopure (S)-ketoprofen becomes simpler and more practical as compared with the previously reported procedures and the product was obtained with >94% ee at 22.3% conversion in the presence of an optimal concentration (0.5 mg/ml) of Tween-80 at pH 3.5. Furthermore, the operational stability of the immobilized biocatalyst was examined in different types of reactors. In an air-bubbled column reactor, the productivity was much higher than that in a packed-bed column reactor, in spite of a slightly lower stability. Under optimal conditions, the air-bubbled column reactor could be operated smoothly for at least 350 h, remaining nearly 50% activity.     

Enantioselective lipase-catalyzed kinetic resolution of N-(2-ethyl-6-methylphenyl)alanine

The enzyme (BSL2), a highly active lipase expressed from newly constructed strain of Bacillus subtilis BSL2, is used in the kinetic resolution of N-(2-ethyl-6-methylphenyl)alanine from the corresponding racemic methyl ester. Reaction conditions are optimized to enhance the enantioselectivity. The effects of various racemic alkyl esters, substrate concentration, operating temperature, pH of the aqueous medium and organic solvents on activity and enantioselectivity of BSL2 for kinetic resolution are also studied. A high enantiomeric ratio (E = 60.7) is reached in diisopropyl ether/water (10%, v/v) and the enantioselectivity is about 22-fold higher than that in pure buffered aqueous solution. The results show that the reaction medium greatly influences BSL2 reaction and its enantioselectivity in the hydrolysis of racemic methyl ester.     

Significant enhancement of lipase enantioselectivity toward (S)- Ketoprofen ester at pH 2

The optimal activity of a Candida rugosa lipase (Lipase OF) for hydrolysis of 2-chloroethyl ester of Ketoprofen [2-(3- benzoyphenyl) propionic acid] was at pH 4.0, while the best enantioselectivity (E) was at pH 2.2 where the enzyme was still 60% active and stable.     

Significantly improved esterase activity of Trichosporon brassicae cells for ketoprofen resolution by 2-propanol treatment

The kinetic resolution of racemic ketoprofen was carried out by enantioselective hydrolysis of ketoprofen ethyl ester using intact cells of Trichosporon brassicae CGMCC0574 as a biocatalyst. After the yeast cells were pretreated by 2 vol.% of 2-propanol for 10 h, the esterase activity on the (S)-ketoprofen ester increased dramatically, by a factor of ca. 310% without reducing the enantioselectivity of enzymatic resolution.     

Resolution of racemic ketoprofen in organic solvents by lipase from Burkholderia cepacia G63

A lipase from the Burkholderia cepacia strain G63 immobilized on resin was used for the resolution of ketoprofen. To study its catalytic properties in enantioselective esterication, different alcohols and solvents were tested to select the most suitable acyl acceptor and reaction medium. Compared with the low activity of the free lipase, the enzyme activity and E value of the immobilized lipase were significantly enhanced. The enantioselectivity of the immobilized lipase could also be markedly improved by adding a small amount of 18-crown-6. RSM was employed to optimize the reaction parameters. The optimal reaction conditions were: reaction time 22.50 h, additives dosage 0.4322 g (0.33 mmol/mL), and substrate molar ratio 54.11:1. Under optimal conditions, the maximal E value was up to 10.01, which exhibited a better enantioselectivity than some commercial lipases, such as Novozym 435, Lipozyme RM IM and LipozymeTL IM.     

Improvement of the functional properties of a thermostable lipase from alcaligenes sp. via strong adsorption on hydrophobic supports

Lipase QL from Alcaligenes sp. is a quite thermostable enzyme. For example, it retains 75% of catalytic activity after incubation for 100 h at 55 °C and pH 7.0. Nevertheless, an improvement of the enzyme properties was intended via immobilization by covalent attachment to different activated supports and by adsorption on hydrophobic supports (octadecyl-sepabeads). This latter immobilization technique promotes the most interesting improvement of enzyme properties: (a) the enzyme is hyperactivated after immobilization: the immobilized preparation exhibits a 135% of catalytic activity for the hydrolysis of p-nitrophenyl propionate as compared to the soluble enzyme; (b) the thermal stability of the immobilized enzyme is highly improved: the immobilized preparation exhibits a half-life time of 12 h when incubated at 80 °C, pH 8.5 (a 25-fold stabilizing factor regarding to the soluble enzyme); (c) the optimal temperature was increased from 50 °C (soluble enzyme) up to 70 °C (hydrophobic support enzyme immobilized preparations); (d) the enantioselectivity of the enzyme for the hydrolysis of glycidyl butyrate and its dependence on the experimental conditions was significantly altered. Moreover, because the enzyme becomes reversibly but very strongly adsorbed on these highly hydrophobic supports, the lipase may be desorbed after its inactivation and the support may be reused. Very likely, adsorption occurs via interfacial activation of the lipase on the hydrophobic supports at very low ionic strength. On the other hand, all the covalent immobilization protocols used to immobilize the enzyme hardly improved the properties of the lipase.     

Morphological, biochemical and kinetic properties of lipase from Candida rugosa immobilized in zirconium phosphate

Zirconium phosphate (ZrP), a low-cost inorganic material with well-defined physicochemical properties, was successfully used as support for immobilizing Candida rugosa lipase by covalent bonding. The immobilized derivative showed high catalytic activity in both aqueous and non-aqueous media. Fourier transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy measurements demonstrated that the ZrP fulfilled the morphological requirements for use as a matrix for immobilizing lipases. The free and immobilized lipases were compared in terms of pH, temperature and thermal stability. The immobilized lipase had a higher pH optimum (7.5) and higher optimum temperature (50°C) than the free lipase. Immobilization also increased the thermal stability. The hydrolysis of p-nitrophenyl palmitate (pNPP) by immobilized lipase, examined at 37°C, followed Michaelis-Menten kinetics. Values for K_m=1.18 µM and V_max=325Umg^-1 indicated that the immobilized system was subject to mass transfer limitations. The immobilized derivative was also tested under repetitive reaction batches in both ester hydrolysis and synthesis.     

Properties of an immobilized lipase of Bacillus coagulans BTS-1

Lipase (EC 3.1.1.3) is a tri-acylglycerol ester hydrolase, catalysing the hydrolysis of tri-, di-, and mono-acylglycerols to glycerol and fatty acids. To study the effect of adsorption of a lipase obtained from Bacillus coagulans BTS-1, its lipase was immobilized on native and activated (alkylated) matrices, i.e. silica and celite. The effect of pH, temperature, detergents, substrates, alcohols, organic solvent etc. on the stability of the immobilized enzyme was evaluated. The gluteraldahyde or formaldehyde (at 1% and 2% concentration, v/v) activated matrix was exposed to the Tris buffered lipase. The enzyme was adsorbed/entrapped more rapidly on to the activated silica than on the activated celite. The immobilized lipase showed optimal activity at 50 degrees C following one-hour incubation. The lipase was specifically more hydrolytic to the medium C-length ester (p-nitro phenyl caprylate than p-nitro phenyl laurate). The immobilization/entrapment enhanced the stability of the lipase at a relatively higher temperature (50 degrees C) and also promoted enzyme activity at an acidic pH (pH 5.5). Moreover, the immobilized lipase was quite resistant to the denaturing effect of SDS.     

Ketoprofen resolution by enzymatic estirification and hydrolysis of the ester product

ImmobilizedCandida antarctica lipase was used to catalyze the separation of ketoprofen into its components by means of esterification followed by the enzymatic hydrolysis of the ester product. In this study, ketoprofen underwent esterification to ethanol in the presence of isooctane. When the reaction was complete, 58.3% of the ketoprofen had been transformed into an ester. The ketoprofen remaining in solution after the reation was complete consisted primarily of itsS-enantiomer (83.0%), while the 59.4% of the ketoprofen component of the ester consisted of itsR-enantiomer. We then subjected the ester product to enzymatic hydrolysis in the presence of the same enzyme and produced a ketoprofen product rich in theR-enantiomer; 77% of this product consisted of theR-enantiomer when 50% of the ester had been hydrolyzed, and 90% of it consisted of theR-enantiomer when 30% of the ester had been hydrolyzed. By contrast, theR-enantiomer levels only reached approximately 42 and 65%, respectively, when 50 and 30% of the racemic ester was hydrolyzed under the same conditions.     

Enantioselective synthesis of (S)-ibuprofen ester prodrug in cyclohexane by Candida rugosa lipase immobilized on Accurel MP1000

An enantioselective esterification process was developed for the synthesis of 2-N-morpholinoethyl (S)-ibuprofen ester prodrug from racemic ibuprofen by using Candida rugosa lipase immobilized on Accurel MP1000 in cyclohexane. Compared with the performance of Lipase MY, the immobilized lipase possesses a higher enzyme activity and thermal stability, but with a slightly suppressed enantioselectivity. A kinetic model was proposed and confirmed from experiments, for the simulation of time-course conversions of both enantiomers at various combinations of substrate concentrations in a batch reactor. Preliminary results of employing the proposed model and the immobilized lipase in a continuous packed-bed reactor were also reported and discussed.