Mutational approaches to improve the biophysical properties of human single-domain antibodies

Monoclonal antibodies are a remarkably successful class of therapeutics used to treat a wide range of indications. There has been growing interest in smaller antibody fragments such as Fabs, scFvs and domain antibodies in recent years. In particular, the development of human V_H and V_L single-domain antibody therapeutics, as stand-alone affinity reagents or as “warheads” for larger molecules, are favored over other sources of antibodies due to their perceived lack of immunogenicity in humans. However, unlike camelid heavy-chain antibody variable domains (V_HHs) which almost unanimously resist aggregation and are highly stable, human V_Hs and V_Ls are prone to aggregation and exhibit poor solubility. Approaches to reduce V_H and V_L aggregation and increase solubility are therefore very active areas of research within the antibody engineering community. Here we extensively chronicle the various mutational approaches that have been applied to human V_Hs and V_Ls to improve their biophysical properties such as expression yield, thermal stability, reversible unfolding and aggregation resistance. In addition, we describe stages of the V_H and V_L development process where these mutations could best be implemented. This article is part of a Special Issue entitled: Recent advances in molecular engineering of antibody.     

Design of humanized antibodies: from anti-Tac to Zenapax

Since the introduction of hybridoma technology, monoclonal antibodies have become one of the most important tools in the biosciences, finding diverse applications including their use in the therapy of human disease. Initial attempts to use monoclonal antibodies as therapeutics were hampered, however, by the potent immunogenicity of mouse (and other rodent) antibodies in humans. Humanization technology has made it possible to remove the immunogenicity associated with the use of rodent antibodies, or at least to reduce it to an acceptable level for clinical use in humans, thus facilitating the application of monoclonal antibodies to the treatment of human disease. To date, nine humanized monoclonal antibodies have been approved for use as human therapeutics in the United States. In this paper, we describe procedures for antibody humanization with an emphasis on strategies for designing humanized antibodies with the aid of computer-guided modeling of antibody variable domains, using as an example the humanized anti-CD25 monoclonal antibody, Zenapax.     

Aglycosylated antibodies and antibody fragments produced in a scalable in vitro transcription-translation system

We describe protein synthesis, folding and assembly of antibody fragments and full-length aglycosylated antibodies using an Escherichia coli-based open cell-free synthesis (OCFS) system. We use DNA template design and high throughput screening at microliter scale to rapidly optimize production of single-chain Fv (scFv) and Fab antibody fragments that bind to human IL-23 and IL-13α1R, respectively. In addition we demonstrate production of aglycosylated immunoglobulin G (IgG₁) trastuzumab. These antibodies are produced rapidly over several hours in batch mode in standard bioreactors with linear scalable yields of hundreds of milligrams/L over a 1 million-fold change in scales up to pilot scale production. We demonstrate protein expression optimization of translation initiation region (TIR) libraries from gene synthesized linear DNA templates, optimization of the temporal assembly of a Fab from independent heavy chain and light chain plasmids and optimized expression of fully assembled trastuzumab that is equivalent to mammalian expressed material in biophysical and affinity based assays. These results illustrate how the open nature of the cell-free system can be used as a seamless antibody engineering platform from discovery to preclinical development of aglycosylated monoclonal antibodies and antibody fragments as potential therapeutics.     

Industrial production of recombinant therapeutics in <Emphasis Type="Italic">Escherichia coli</Emphasis> and its recent advancements

Nearly 30% of currently approved recombinant therapeutic proteins are produced in Escherichia coli. Due to its well-characterized genetics, rapid growth and high-yield production, E. coli has been a preferred choice and a workhorse for expression of non-glycosylated proteins in the biotech industry. There is a wealth of knowledge and comprehensive tools for E. coli systems, such as expression vectors, production strains, protein folding and fermentation technologies, that are well tailored for industrial applications. Advancement of the systems continues to meet the current industry needs, which are best illustrated by the recent drug approval of E. coli produced antibody fragments and Fc-fusion proteins by the FDA. Even more, recent progress in expression of complex proteins such as full-length aglycosylated antibodies, novel strain engineering, bacterial N-glycosylation and cell-free systems further suggests that complex proteins and humanized glycoproteins may be produced in E. coli in large quantities. This review summarizes the current technology used for commercial production of recombinant therapeutics in E. coli and recent advances that can potentially expand the use of this system toward more sophisticated protein therapeutics.     

Engineering the variable region of therapeutic IgG antibodies

Since the first generation of humanized IgG1 antibodies reached the market in the late 1990s, IgG antibody molecules have been extensively engineered. The success of antibody therapeutics has introduced severe competition in developing novel therapeutic monoclonal antibodies, especially for promising or clinically validated targets. Such competition has led researchers to generate so-called second or third generation antibodies with clinical differentiation utilizing various engineering and optimization technologies. Parent IgG antibodies can be engineered to have improved antigen binding properties, effector functions, pharmacokinetics, pharmaceutical properties and safety issues. Although the primary role of the antibody variable region is to bind to the antigen, it is also the main source of antibody diversity and its sequence affects various properties important for developing antibody therapeutics. Here we review recent research activity in variable region engineering to generate superior antibody therapeutics.Key words: antibody therapeutics, variable region, engineering, affinity, pharmacokinetics, stability, immunogenicity     

Monoclonal antibodies: technologies for early discovery and engineering

Antibodies are essential in modern life sciences biotechnology. Their architecture and diversity allow for high specificity and affinity to a wide array of biochemicals. Combining monoclonal antibody (mAb) technology with recombinant DNA and protein expression links antibody genotype with phenotype. Yet, the ability to select and screen for high affinity binders from recombinantly-displayed, combinatorial libraries unleashes the true power of mAbs and a flood of clinical applications. The identification of novel antibodies can be accomplished by a myriad of in vitro display technologies from the proven (e.g. phage) to the emerging (e.g. mammalian cell and cell-free) based on affinity binding as well as function. Lead candidates can be further engineered for increased affinity and half-life, reduced immunogenicity and/or enhanced manufacturing, and storage capabilities. This review begins with antibody biology and how the structure and genetic machinery relate to function, diversity, and in vivo affinity maturation and follows with the general requirements of (therapeutic) antibody discovery and engineering with an emphasis on in vitro display technologies. Throughout, we highlight where antibody biology inspires technology development and where high-throughput, “big data” and in silico strategies are playing an increasing role. Antibodies dominate the growing class of targeted therapeutics, alone or as bioconjugates. However, their versatility extends to research, diagnostics, and beyond.     

Engineering Fully Human Monoclonal Antibodies from Murine Variable Regions

Fully human monoclonal antibodies (mAbs) derived from transgenic mice or human antibody libraries are the current state of the art for reducing the immunogenicity risk of antibody drugs. Here, we describe a novel method for generating fully human mAbs from nonhuman variable regions using information from the human germline repertoire. Central to our strategy is the rational engineering of residues within and proximal to CDRs and the V_H/V_L interface by iteratively exploring substitutions to the closest human germline sequences using semi-automated computational methods. Starting from the parent murine variable regions of three currently marketed mAbs targeting CD25, vascular endothelial growth factor, and tumor necrosis factor alpha, we have generated fully human antibodies with 59, 46, and 45 substitutions, respectively, compared to the parent murine sequences. A large number of these substitutions were in the CDRs, which are typically avoided in humanization methods. Antigen affinities of the fully human variants were comparable to the chimeric mAbs in each case. Furthermore, in vitro functional characterization indicated that all retain potency of the chimeric mAbs and have comparable activity to their respective marketed drugs daclizumab, bevacizumab, and infliximab. Based on local and global sequence identity, the sequences of our engineered mAbs are indistinguishable from those of fully human mAbs isolated from transgenic mice or human antibody libraries. This work establishes a simple rational engineering methodology for generating fully human antibody therapeutics from murine mAbs produced from standard hybridoma technology.     

Antibody discovery: the use of transgenic mice to generate human monoclonal antibodies for therapeutics

Technical advances made in the 1980s and early 1990s resulted in monoclonal antibodies that are now approved for human therapy. Novel transgenic mouse strains provide a powerful technology platform for creating fully human monoclonal antibodies as therapeutics; ten such antibodies have entered clinical trials since 1998 and more are in preclinical testing. Improved transgenic mouse strains provide a powerful technology platform for creating human therapeutics in the future.     

Protein Engineering of Antibodies

Abstract

This article reviews the technical advances in antibody engineering and the clinical applications of these molecules. Recombinant DNA technology facilitates the construction and expression of engineered antibodies. These novel molecules are designed to meet specific applications. Although genomic and cDNA cloning have been used widely in the past to isolate the relevant antibody V domains, at present, the PCR-based cloning is the preferred system. Bacterial and mammalian expression systems are used commonly for the production of antibodies, antibody fragments, and antibody fusion proteins. A range of chimeric antibodies with murine V domains joined to C regions from human and other species have been produced and found to exhibit the expected binding characteristics and effector functions. Humanized antibodies have been developed to minimize the HAMA response, and bifunctional immunoglobulins are being used in tumor therapy and diagnosis. Single chain antibodies and fusion proteins with antibody specificities joined to nonimmunoglobulin sequences provide a source of antibody-like molecules with novel properties. The potential applications of minimal recognition units and antigenized antibodies are described. Combinatorial libraries produced in bacteriophage present an alternative to hybridomas for the production of antibodies with the desired antigen binding specificities. Future developments in this field are discussed also.     

Antibody engineering and modification technologies

Antibody engineering has become a well-developed discipline, encompassing discovery methods, production strategies, and modification techniques that have brought forth clinically investigated and marketed therapeutics. The realization of the long-standing goal of production of fully human monoclonal antibodies has focused intensive research on the clinical employment of this potent drug category. However, antibodies are large macromolecules that pose numerous challenges in formulation, optimal pharmacokinetics, manufacturing, stability, and process development. While further improvements in discovery technologies, such as phage display, ribosome display, and transgenic animals continue to advance our capacity to rapidly screen and refine optimal binding molecules, antibody engineers have recently focused more of their efforts on improving protein production and stability, as well as engineering improved biological properties in the effector domains of monoclonal antibodies. A second long-standing goal of antibody engineering, the development of targeted drugs, has not been wholly realized, but this obvious application for antibodies is currently undergoing increasing exploration. Minimal binding proteins, such as Fab, scFv, and single variable domains are the preferred targeting elements for some investigational drugs, whereas non-immunoglobulin scaffold proteins have been explored as binding proteins in other designs. The necessity to utilize non-protein components in targeted drugs, such as polymers, linkers, and cytotoxics, has brought a convergence of the fields of bioconjugate chemistry and protein engineering in experimental antibody therapeutics.     

Surface plasmon resonance (SPR) based binding studies of refolded single chain antibody fragments

Recent advances in Recombinant antibody technology / Antibody Engineering has given impetus to the genetic manipulation of antibody fragments that has paved the way for better understanding of the structure and functions of immunoglobulins and also has escalated their use in immunotherapy. Bacterial expression system such as Escherichia coli has complemented this technique through the expression of recombinant antibodies. Present communication has attempted to optimize the expression and refolding protocol of single chain fragment variable (ScFv) and single chain antigen binding fragment (ScFab) using E.coli expression system. Efficiency of refolding protocol was validated by structural analysis by CD, native folding by fluorescence and functional analysis by its binding with full length HIV-1 gp120 via SPR. Results show the predominant β–sheet (CD) as secondary structural content and native folding via red shift (tryptophan fluorescence). The single chain fragments have shown good binding with HIV-1 gp120 thus validating the expression and refolding strategy and also reinstating E.coli as model expression system for recombinant antibody engineering. SPR based binding analysis coupled with E.coli based expression and purification will have implication for HIV therapeutics and will set a benchmark for future studies of similar kind.     

Identifying bottlenecks in transient and stable production of recombinant monoclonal-antibody sequence variants in chinese hamster ovary cells

The increasing demand for antibody-based therapeutics has emphasized the need for technologies to improve recombinant antibody titers from mammalian cell lines. Moreover, as antibody therapeutics address an increasing spectrum of indications, interest has increased in antibody engineering to improve affinity and biological activity. However, the cellular mechanisms that dictate expression and the relationships between antibody sequence and expression level remain poorly understood. Fundamental understanding of how mammalian cells handle high levels of transgene expression and of the relationship between sequence and expression are vital to the development of new antibodies and for increasing recombinant antibody titers. In this work, we analyzed a pair of mutants that vary by a single amino acid at Kabat position 49 (heavy-chain framework), resulting in differential transient and stable titers with no apparent loss of antigen affinity. Through analysis of mRNA, gene copy number, intracellular antibody content, and secreted antibody, we found that while translational/post-translational mechanisms are limiting in transient systems, it appears that the amount of available transgenic mRNA becomes the limiting event on stable integration of the recombinant genes. We also show that amino acid substitution at residue 49 results in production of a non-secreted HC variant and postulate that stable antibody expression is maintained at a level which prevents toxic accumulation of this HC-related protein. This study highlights the need for proper sequence engineering strategies when developing therapeutic antibodies and alludes to the early analysis of transient expression systems to identify the potential for aberrant stable expression behavior.     

Fc-fusion proteins and FcRn: structural insights for longer-lasting and more effective therapeutics

Nearly 350 IgG-based therapeutics are approved for clinical use or are under development for many diseases lacking adequate treatment options. These include molecularly engineered biologicals comprising the IgG Fc-domain fused to various effector molecules (so-called Fc-fusion proteins) that confer the advantages of IgG, including binding to the neonatal Fc receptor (FcRn) to facilitate in vivo stability, and the therapeutic benefit of the specific effector functions. Advances in IgG structure-function relationships and an understanding of FcRn biology have provided therapeutic opportunities for previously unapproachable diseases. This article discusses approved Fc-fusion therapeutics, novel Fc-fusion proteins and FcRn-dependent delivery approaches in development, and how engineering of the FcRn–Fc interaction can generate longer-lasting and more effective therapeutics.     

Antibody engineering at the millennium

It has been almost 100 years since von Behring and Kitasato received the first Nobel prize for the discovery of passive immunotherapy and nearly 25 years since K?hler and Milstein first reported hybridoma technology. In the 15 years since Mullis and co-workers described PCR, a number of discoveries and technologies have converged to produce a renaissance in antibody therapeutics. Our vision of antibodies as tools for research--useful for the prevention, detection and treatment of disease--has been revolutionized by these recent advances. This review specifically focuses on what is now called antibody engineering and includes chimeric and humanized antibodies, immunoglobulin fragments, antibody libraries, antibody fusion proteins and transgenic organisms as bioreactors. As a consequence of refinements in antibody technology, the field of genetically engineered immunoglobulins has matured into an elegant and important drug and reagent development platform.     

Modulation of flavonoid metabolism in Arabidopsis using a phage-derived antibody

The utility of recombinant antibodies for immunomodulation of plant metabolism was tested using the Arabidopsis flavonoid biosynthetic pathway as a target. Two genes encoding antibodies against chalcone isomerase (CHI) were isolated from a human synthetic single chain variable fragment (scFv) library and expressed in the cytoplasm of transgenic plants. In one line, low-level expression of the scFv resulted in reduced visible pigmentation in seedlings as well as lower accumulation of phenolics in plants throughout development. Surprisingly, other transgenic lines with much higher expression of the same antibody showed no phenotype. Protein mobility shift assays indicated that the scFv is bound to the target enzyme, but only in the affected plants. This work shows that recombinant scFv antibody technology offers a viable approach to disrupting protein activity in plants, but that further refinement is required before it will be of general utility for metabolic engineering and other antibody-based applications in plants.     

Phage display-derived human antibodies in clinical development and therapy

Over the last 3 decades, monoclonal antibodies have become the most important class of therapeutic biologicals on the market. Development of therapeutic antibodies was accelerated by recombinant DNA technologies, which allowed the humanization of murine monoclonal antibodies to make them more similar to those of the human body and suitable for a broad range of chronic diseases like cancer and autoimmune diseases. In the early 1990s in vitro antibody selection technologies were developed that enabled the discovery of “fully” human antibodies with potentially superior clinical efficacy and lowest immunogenicity.

Antibody phage display is the first and most widely used of the in vitro selection technologies. It has proven to be a robust, versatile platform technology for the discovery of human antibodies and a powerful engineering tool to improve antibody properties. As of the beginning of 2016, 6 human antibodies discovered or further developed by phage display were approved for therapy. In 2002, adalimumab (Humira®) became the first phage display-derived antibody granted a marketing approval. Humira® was also the first approved human antibody, and it is currently the best-selling antibody drug on the market. Numerous phage display-derived antibodies are currently under advanced clinical investigation, and, despite the availability of other technologies such as human antibody-producing transgenic mice, phage display has not lost its importance for the discovery and engineering of therapeutic antibodies.

Here, we provide a comprehensive overview about phage display-derived antibodies that are approved for therapy or in clinical development. A selection of these antibodies is described in more detail to demonstrate different aspects of the phage display technology and its development over the last 25 years.     

Protein engineering of antibodies.

This article reviews the technical advances in antibody engineering and the clinical applications of these molecules. Recombinant DNA technology facilitates the construction and expression of engineered antibodies. These novel molecules are designed to meet specific applications. Although genomic and cDNA cloning have been used widely in the past to isolate the relevant antibody V domains, at present, the PCR-based cloning is the preferred system. Bacterial and mammalian expression systems are used commonly for the production of antibodies, antibody fragments, and antibody fusion proteins. A range of chimeric antibodies with murine V domains joined to C regions from human and other species have been produced and found to exhibit the expected binding characteristics and effector functions. Humanized antibodies have been developed to minimize the HAMA response, and bifunctional immunoglobulins are being used in tumor therapy and diagnosis. Single chain antibodies and fusion proteins with antibody specificities jointed to nonimmunoglobulin sequences provide a source of antibody-like molecules with novel properties. The potential applications of minimal recognition units and antigenized antibodies are described. Combinatorial libraries produced in bacteriophage present an alternative to hybridomas for the production of antibodies with the desired antigen binding specificities. Future developments in this field are discussed also.     

Antibody cocktails: next-generation biopharmaceuticals with improved potency

The therapeutic and commercial success of monoclonal antibodies (mAbs) has inspired innovative approaches aimed at increasing their potency and broadening their applicability. Among these, cocktails of recombinant human mAbs are a logical next step because they combine the technological advances made in the field of antibody engineering with the notion that the ingredients of polyclonal-antibody preparations act in concert to optimally exert and recruit effector functions. Cocktails of mAbs have entered clinical trials, and new technology platforms are being developed for their generation. On the basis of preclinical and early clinical results, the question is not whether cocktails of mAbs have a bright future as therapeutics, but rather what platform is able to reproducibly and cost effectively generate efficacious concoctions that are approvable by the regulatory authorities.     

Engineering the variable region of therapeutic IgG antibodies

Since the first generation of humanized IgG1 antibodies reached the market in the late 1990s, IgG antibody molecules have been extensively engineered. The success of antibody therapeutics has introduced severe competition in developing novel therapeutic monoclonal antibodies, especially for promising or clinically validated targets. Such competition has led researchers to generate so-called second or third generation antibodies with clinical differentiation utilizing various engineering and optimization technologies. Parent IgG antibodies can be engineered to have improved antigen binding properties, effector functions, pharmacokinetics, pharmaceutical properties and safety issues. Although the primary role of the antibody variable region is to bind to the antigen, it is also the main source of antibody diversity and its sequence affects various properties important for developing antibody therapeutics. Here we review recent research activity in variable region engineering to generate superior antibody therapeutics.     

Ribosome display: next-generation display technologies for production of antibodies in vitro

Antibodies represent an important and growing class of biologic research reagents and biopharmaceutical products. They can be used as therapeutics in a variety of diseases. With the rapid expansion of proteomic studies and biomarker discovery, there is a need for the generation of highly specific binding reagents to study the vast number of proteins encoded by the genome. Display technologies provide powerful tools for obtaining antibodies. Aside from the preservation of natural antibody repertoires, they are capable of exploiting diversity by DNA recombination to create very large libraries for selection of novel molecules. In contrast to in vivo immunization processes, display technologies allow selection of antibodies under in vitro-defined selection condition(s), resulting in enrichment of antibodies with desired properties from large populations. In addition, in vitro selection enables the isolation of antibodies against difficult antigens including self-antigens, and this can be applied to the generation of human antibodies against human targets. Display technologies can also be combined with DNA mutagenesis for antibody evolution in vitro. Some methods are amenable to automation, permitting high-throughput generation of antibodies. Ribosome display is considered as representative of the next generation of display technologies since it overcomes the limitations of cell-based display methods by using a cell-free system, offering advantages of screening larger libraries and continuously expanding new diversity during selection. Production of display-derived antibodies can be achieved by choosing one of a variety of prokaryotic and eukaryotic cell-based expression systems. In the near future, cell-free protein synthesis may be developed as an alternative for large-scale generation of antibodies.