Diversity and inheritance of inter-simple sequence repeat polymorphisms in Douglas-fir (Pseudotsuga menziesii) and sugi (Cryptomeria japonica)

We studied inter-simple sequence repeat (ISSR) polymorphism and inheritance in Douglas-fir [Pseudotsuga menziesii (Mirb.) Franco] and sugi (Cryptomeria japonica D. Don) megagametophytes using primers that anneal to simple repeats of various lengths, sequences, and non-repetitive motifs at the 5 and 3 ends. Products were visualized on agarose gels with ethidium bromide staining. More than 60% of the 96 primers tested gave interpretable banding patterns in both Douglas-fir and sugi, and the useful primers were in complete agreement among species. Dinucleotide repeat primers were the majority of those tested, and gave all of the useful banding patterns. The 24 best primers were used for segregation studies, yielding a total of 77 loci distributed among two Douglas-fir families and one sugi family. Approximately 90% of the 24 primers showed polymorphism within at least one of the three families. The average number of variable loci per primer was 1.6. Primers based on (AG) _n repeats gave the largest number of polymorphic loci; 16 primer-family combinations yielded 24 segregating loci. However, primer based on (GT) _n repeats gave the most loci per primer studied (mean of 2.0). All markers displayed apparent dominance (band presence vs absence), and all but three segregation ratios (4%) fit Mendelian expectations: Because they employ longer primers than do RAPDs, have a high degree of polymorphism, conform well to Mendelian expectations, and do not require use of acrylamide gels for analysis, ISSRs may be useful markers for PCR-based genome maps and population studies of conifers.Paper 3082 of the Forest Research Laboratory, Oregon State University     

Inter-simple-sequence repeat (ISSR)-PCR for the identification of saprophytic strains of Leptospira

The inter-simple-sequence repeat (ISSR) primers that anneal to a simple repeat of various length and at non-repetitive motifs at 3 and 5 end were attempted for PCR amplification of Leptospira genome. Of the six ISSR primers tested, namely, (AG)₈T, (AG)₈C, (AG)₈G, (CA)₈A, (TG)₈C and (TG)₈G, only primer (AG)₈T produced amplification of 1000 bp in the two non-pathogenic Leptospira species tested, viz; Leptospira biflexa serovar patoc and L. meyeri serovar ranarum, with no amplification in any of the 16 standard pathogenic serovars tested. The remaining five ISSR primers did not exhibit any amplification of the Leptospira genome in either pathogenic or non-pathogenic species. From among 35 Leptospira isolates recovered from hospitalized patients with pyrexia of unknown origin and/or febrile jaundice (12 in number) and from different environmental water sources (23 in number), (AG)₈T ISSR-PCR correctly identified all the 22 isolates from water sources that were confirmed to be non-pathogenic by conventional tests. The results therefore, confirmed the ability of a primer, based on simple-sequence repeat motif, to produce a fragment that is useful as a group genetic marker in Leptospira species. The single nucleotide anchor, T, at the 3 end of the primer appeared to play an important role in differentiation of pathogenic and non-pathogenic species of Leptospira. Multiplex PCR, using ISSR primer, (AG)₈T and the reported 16S rRNA gene primers, specific for pathogenic Leptospira species, or the 23S rRNA Leptospira genus specific primers, provided clear identification of serovars and isolates into pathogenic or non-pathogenic groups.     

Photoreactive dTTP Analogues as Substrates for Thermostable DNA Polymerase from Thermus thermophilus B35

Substrate properties of several dTTP analogues bearing a photoreactive 2-nitro-5-azidobenzoyl (NAB) group attached at position 5 of uracil through linkers of various lengths, dTTP–NAB-x-dUTP (where x = 2, 4, 7–13 is the number of atoms in the linker), were studied. All the analogues are substrates for thermostable Thermus thermophilus B35 DNA polymerase in the elongation reaction of the 5-³²P-labeled primer–template complex. The kinetic parameters of some of the analogues were determined and compared with those of natural dTTP. It was shown that an increase in the linker length results in a higher efficiency of the analogue. The incorporation of NAB-x-dUP residues into the 3 primer end did not impede further elongation of the chain in the presence of natural dNTP.     

Identification of a codominant amplified polymorphic DNA marker linked to the verticillium wilt resistance gene in tomato

Resistance to verticillium wilt, a vascular disease causing yield losses in many crops, is conferred in tomato by a single dominant allele, Ve. A population segregating for the Ve allele was generated using near-isogenic tomato lines. Analysis of the parental tomato DNA using the polymerase chain reaction and 400 random primers, each 10 deoxyribonucleotides in length, produced 1,880 amplified DNA fragments. Of the four polymorphisms observed between the resistant and susceptible parental genotypes, only one was linked to the Ve gene. No recombination was observed between this DNA marker and the Ve locus, indicating that the linkage is less than 3.5±2.7 cM. The marker detected both the susceptible and resistant alleles, producing amplified DNA fragments of approximately 1,300 and 1,350 bp, respectively. The sequence of the primer, determined from cloned amplified products, was 5 CTCACATGCA 3 instead of the expected 5 CTCACATGCC 3. The marker will be of value to tomato breeding programs because of the tight linkage, Codominant nature, and analytical procedure utilized.     

Detection of DNA sequence polymorphisms among wheat varieties

Summary A DNA marker detection strategy that allows the rapid, efficient resolution of high levels of polymorphism among closely related lines of common wheat (Triticum aestivum) has been developed to circumvent the apparent lack of restriction fragment length polymorphism in many important self-pollinated crop species. The technique of randomly amplified polymorphic DNA (RAPD) was combined with a denaturing gradient gel electrophoresis system (DGGE) to explore DNA sequence polymorphisms among different genotypes of wheat. Of the 65 primer combinations used for the polymerase chain reaction (PCR) amplifications, over 38% of them produced readily detectable and reproducible DNA polymorphisms between a spring wheat line, SO852, and a winter wheat variety, Clark. A high level of polymorphism was observed among a number of commercial varieties and breeding lines of wheat. This procedure was also used to detect polymorphisms in a recombinant inbred population to test the feasibility of its application in genome mapping. This DNA polymorphism detection system provides an opportunity for pedigree analysis and fingerprinting of developed wheat lines as well as construction of a high density genetic map of wheat. Without the need for ³²P and sophisticated DNA extraction procedures, this approach should make it feasible to utilize marker-based selection in a plant breeding program.     

Direct sequencing of tobacco chloroplast genome by the polymerase chain reaction

We have developed a polymerase chain reaction (PCR) method for sequencing of tobacco chloroplast genome. In a mixture containing chloroplast DNA, 5-end-labeled oligonucleotide primer, Taq DNA polymerase and reaction buffer, we were able to sequence a segment of chloroplast 16S rRNA gene. The results showed that the 750 bp of DNA sequenced were identical to the sequence reported, indicating that direct sequencing method that we have developed is useful for the sequencing of chloroplast genome. To analyze the chloroplast genome more rapidly in those in vitro grown plantlets, we also developed a simple method which is applicable for the amplifications and sequencing of chloroplast 16S rRNA fragment from either 0.15 g of tobacco leaf or stem tissue. The readable sequences obtained from the presented methods were consistent with the published sequence.     

PCR-based DNA markers linked to a gall midge resistance gene, Gm4t, has potential for marker-aided selection in rice

Rice DNAs from a gall midge resistant variety, Abhaya, a susceptible variety, Tulsi and their F₃ progeny were screened using 500 random primers in conjunction with bulked-segregant analysis in a polymerase chain reaction (PCR) with a view to detecting random amplified polymorphic DNAs (RAPDs) linked to the gene, Gm4t, which confers resistance to gall midge, a dipteran insect pest of rice. A total of 454 primers were able to produce a distinct amplification pattern, and 3695 bands/loci were amplified between the phenotypically different parents. Of these, 304 bands were polymorphic between the parents, with 19 being phenotypespecific. One of these primers, E20, amplified 2 bands, E20₅₇₀ and E20₅₈₃, which are tightly linked to resistance and susceptibility, respectively. These specific bands were cloned and sequenced, and a 94% sequence homology was found between the two fragments. Two specific 20-mer oligonucleotides were synthesized, based on the sequence information of E20₅₈₃, for use in PCR amplification directly from genomic DNAs. These PCR primers were able to amplify phenotype-specific bands, a 583-bp fragment in susceptible F₃ lines and a 570-bp fragment in resistant F₃ lines that had been derived from a cross between the parents, indicating their potential and utility for marker-aided selection of the Gm4t gene in rice. Its use would facilitate the early and efficient selection of resistant genes in plant breeding programmes and even in those areas where the insect is not known to occur. These phenotype-specific bands are single-copy sequences and are being mapped to ascertain their chromosomal location in rice.     

MAAP: a versatile and universal tool for genome analysis

Multiple arbitrary amplicon profiling (MAAP) uses one or more oligonucleotide primers (5 nt) of arbitrary sequence to initiate DNA amplification and generate characteristic fingerprints from anonymous genomes or DNA templates. MAAP markers can be used in general fingerprinting as well as in mapping applications, either directly or as sequence-characterized amplified regions (SCARs). MAAP profiles can be tailored in the number of monomorphic and/or polymorphic products. For example, multiple endonuclease digestion of template DNA or the use of mini-hairpin primers can enhance detection of polymorphic DNA. Comparison of the expected and actual number of amplification products produced with primers differing in length, sequence and GC content from templates of varying complexity reveal severe departures from theoretical formulations with interesting implications in primer-template interaction. Extensive primer-template mismatching can occur when using templates of low complexity or long primers. Primer annealing and extension appears directed by an 8 nt 3-terminal primer domain, requires sites with perfect homology to the first 5–6 nt fom the 3 terminus, and involves direct physical interaction between amplicon annealing sites.     

RFLP and RAPD mapping of the rice gm2 gene that confers resistance to biotype 1 of gall midge (Orseolia oryzae)

Gm2 is dominant gene conferring resistance to biotype 1 of gall midge (Orseolia oryzae Wood-Mason), the major dipteran pest of rice. The gene was mapped by restriction fragment length polymorphism (RFLP) analysis of a set of 40 recombinant inbred lines derived from a cross between the resistant variety Phalguna and the susceptible landrace ARC 6650. The gene is located on chromosome 4 at a position 1.3 cM from marker RG329 and 3.4 cM from RG476. Since the low (28%) polymorphism of this indica x indica cross hindered full coverage of the genome with RFLP markers, the mapping was checked by random amplified polymorphic DNA (RAPD)/bulked segregant analysis. Through the use of 160 RAPD primers, the number of polymorphic markers was increased from 43 to 231. Two RAPD primers amplified loci that co-segregated with resistance/susceptibility. RFLP mapping of these loci showed that they are located 0.7 cM and 2.0 cM from RG476, confirming the location of Gm2 in this region of chromosome 4. Use of these DNA markers will accelerate breeding for gall midge resistance by permitting selection of the Gm2 gene independently of the availability of the insect.     

Use of RAPD markers to screen somatic hybrids between Solanum tuberosum and S. brevidens

Summary The identification of somatic hybrids between Solanum tuberosum and S. brevidens can be carried out using polymerase chain reaction (PCR) and arbitrary 10-mer primers to generate random amplified polymorphic DNA (RAPD) markers. Five commercial primers have been tested. Each primer directed the amplification of a genome-specific fingerprint for the fusion parents and S. brevidens. The size of the amplified DNA fragments ranged from 100 to 1800 base pairs. The somatic hybrids showed a combination of the parental banding profiles with four of the five primers surveyed, whereas regenerants from one of the parents had the same or a similar banding pattern to that of the parent. Thus RAPD markers provide a quick, simple and preliminary screening method for putative somatic hybrids.Abbreviations EDTA ethylenediaminetetraacetic acid, - PCR polymerase chain reaction - RAPD random amplified polymorphic DNA - RFLP restriction fragment length polymorphisms - TBE Tris-borate-EDTA buffer - Tris trizma base