Ethanol from Whey: Continuous Fermentation with a Catabolite Repression-Resistant Saccharomyces cerevisiae Mutant

An alternative method for the conversion of cheese whey lactose into ethanol has been demonstrated. With the help of continuous-culture technology, a catabolite repression-resistant mutant of Saccharomyces cerevisiae completely fermented equimolar mixtures of glucose and galactose into ethanol. The first step in this process was a computer-controlled fed-batch operation based on the carbon dioxide evolution rate of the culture. In the absence of inhibitory ethanol concentrations, this step allowed us to obtain high biomass concentrations before continuous fermentation. The continuous anaerobic process successfully incorporated a cell-recycle system to optimize the fermentor productivity. Under conditions permitting a low residual sugar concentration (≤1%), maximum productivity (13.6 g liter⁻¹ h⁻¹) was gained from 15% substrate in the continuous feed at a dilution rate of 0.2 h⁻¹. Complete fermentation of highly concentrated feed solutions (20%) was also demonstrated, but only with greatly diminished fermentor productivity (5.5 g liter⁻¹ h⁻¹).     

Lactic acid from cheese whey permeate. Productivity and economics of a continuous membrane bioreactor

The economics of incorporating membrane modules in several steps in the conversion of whey permeate to lactic acid was studied. Membrane recycle fermenters operating at a cell concentration of 40 g l^–1 resulted in a productivity of 22.5 g l^–1h^–1 with a lactate concentration of 89 g l^–1 and a yield of 0.89. The membrane units (reverse osmosis for preconcentrating whey permeate, hollow-fiber ultrafiltration for clarification and for cell recycling) contribute about 28% of the total fixed capital costs and less than 5% of the operating cost. The two largest costs are whey transportation and yeast extract, contributing about 35% and 38% to the total product cost of US $ 0.98/kg 85% lactate. Without these two costs, unpurified lactate could be produced for $ 0.27/kg.     

Butanol production from concentrated lactose/whey permeate: Use of pervaporation membrane to recover and concentrate product

In these studies, butanol (acetone butanol ethanol or ABE) was produced from concentrated lactose/whey permeate containing 211 g L^?1 lactose. Fermentation of such a highly concentrated lactose solution was possible due to simultaneous product removal using a pervaporation membrane. In this system, a productivity of 0.43 g L^?1 h^?1 was obtained which is 307 % of that achieved in a non-product removal batch reactor (0.14 g L^?1 h^?1) where approximately 60 g L^?1 whey permeate lactose was fermented. The productivity obtained in this system is much higher than that achieved in other product removal systems (perstraction 0.21 g L^?1 h^?1 and gas stripping 0.32 g L^?1 h^?1). This membrane was also used to concentrate butanol from approximately 2.50 g L^?1 in the reactor to 755 g L^?1. Using this membrane, ABE selectivities and fluxes of 24.4–44.3 and 0.57–4.05 g m^?2 h^?1 were obtained, respectively. Pervaporation restricts removal of water from the reaction mixture thus requiring significantly less energy for product recovery when compared to gas stripping.     

Continuous lactic acid fermentation with concentrated product recovery by ultrafiltration and electrodialysis

Lactose of sweet whey permeate was converted into sodium lactate byLactobacillus helveticus. To increase the, productivity of the lactic acid fermentation and to reduce the amounts of effluents, the bioreactor was coupled with an ultrafiltration module and an electrodialysis unit. Without the electrodialyzer, with total cell recycling and at a dilution rate of 0.88 h^–1, a cellular concentration of 64 gl^–1 and a productivity of 22 gl^–1 h^–1 were obtained. When the electrodialysis unit is coupled, the outlet concentration of lactate was stabilized at 85±5 gl^–1.     

Continuous propionic acid production from cheese whey usingin situ spin filter

The potential use of spin filter device to retainPropionibacterium acidipropionici in the bioreactor under continuous mode of fermentation and improve propionic acid productivity, was examined. The yield of propionic acid based on lactose concentration was 51% in batch and 54% in continuous (dilution rate=0.05 h⁻¹) operation. The yield in continuous fermentation with cell retention using spin filter of 10 micron size (dilution rate=0.05 h⁻¹) was even higher at 70% (w/w). The volumetric productivity under batch and continuous mode of operation were 0.312 g L⁻¹ h⁻¹ and 0.718 g L⁻¹ h⁻¹ respectively. Continuous fermentation with cell retention demonstrated even higher volumetric productivities at 0.98 g L⁻¹ h⁻¹ with out clogging problems It could be used for utilization of cheese whey to produce propionic acid at higher yield and productivities.     

The effect of yeast extract supplementation on the production of lactic acid from whey permeate byLactobacillus helueticus

Summary Batch and continuous two-stage cultures have been conducted in order to determine the effect of yeast extract (YE) on the homolactic fermentation of whey permeate byLactobacillus helveticus. Supplementation with YE had a significant effet on lactic acid concentration, volumetric productivity, and substrate conversion, but not on lactic acid yield. Volumetric productivity in the first stage increased from 2 to 9 g l^–1 per hour by increasing the YE concentration from 1.5 to 25 g l^–1 At the same time conversion improved from 22% to 93% at a dilution rate of 0.2 h^–1. The second stage demonstrated the effect of YE at a lower dilution rate (0.14 h^–1. A high system conversion (97%) and a high final lactic acid concentration (40 g l^–1) were achieved with 10 g l^–1 YE.     

Efficient Preparation of Enantiopure D-Phenylalanine through Asymmetric Resolution Using Immobilized Phenylalanine Ammonia-Lyase from Rhodotorula glutinis JN-1 in a Recirculating Packed-Bed Reactor

An efficient enzymatic process was developed to produce optically pure D-phenylalanine through asymmetric resolution of the racemic DL-phenylalanine using immobilized phenylalanine ammonia-lyase (RgPAL) from Rhodotorula glutinis JN-1. RgPAL was immobilized on a modified mesoporous silica support (MCM-41-NH-GA). The resulting MCM-41-NH-GA-RgPAL showed high activity and stability. The resolution efficiency using MCM-41-NH-GA-RgPAL in a recirculating packed-bed reactor (RPBR) was higher than that in a stirred-tank reactor. Under optimal operational conditions, the volumetric conversion rate of L-phenylalanine and the productivity of D-phenylalanine reached 96.7 mM h⁻¹ and 0.32 g L⁻¹ h⁻¹, respectively. The optical purity (ee _D) of D-phenylalanine exceeded 99%. The RPBR ran continuously for 16 batches, the conversion ratio did not decrease. The reactor was scaled up 25-fold, and the productivity of D-phenylalanine (ee _D>99%) in the scaled-up reactor reached 7.2 g L⁻¹ h⁻¹. These results suggest that the resolution process is an alternative method to produce highly pure D-phenylalanine.     

Control of ethanol production and monitoring of membrane performance by mass-spectrometric gas analysis in the coupled fermentation-pervaporation of whey permeate

A coupled fermentation-pervaporation process was operated continuously with on-line mass spectrometric gas analysis monitoring of product accumulation on both the upstream and the downstream sides of the membrane. Efficient coupling of the fermentation with pervaporation was attained when a steady state of ethanol production and removal was achieved with whey permeate containing high concentrations of lactose (>8%) or by controlled lactose additions that also compensated for loss of liquid due to pervaporation. The combined system consists of a tubular membrane pervaporation module, directly connected to a stirred fermentor to form one circulation loop, kept at 38°C, with both units operating under computer control. Mass spectrometric gas analysis of the CO₂ gas evolved in the fermentor and the ethanol and water in the pervaporate on the downstream side of the membrane enabled us to follow the production of ethanol and its simultaneous removal. Membrane selectivity was calculated on-line and served to monitor the functioning of the membrane. Batch-wise-operated fermentation-pervaporation with Candida pseudotropicalis IP-513 yielded over 120 gl^–1 of concentrated ethanol solution using supplemented whey permeate containing 16% lactose. A steady state lasting for about 20 h was achieved with ethanol productivity of 20 g h^–1 (approx. 4 g l^–1 h^–1). Membrane selectivity was over 8. Controlled feeding of concentrated lactose suspension in the whey permeate (350 g l^–1) resulted in the continuous collection of 120–140 g l^–1 of ethanol pervaporate for 5 days, by which time salt accumulation hampered the fermentation. Medium refreshment restored the fermentative activity of the yeast cells and further extended the coupled process to over 9 days (200 h), when reversible membrane fouling occurred. The membrane module was exchanged and the combined process restarted. Correspondence to: Y. Shabtai     

Continuous production ofl-lactic acid from whey permeate by immobilizedLactobacillus casei subsp.casei

Summary The production of l-lactic acid from whey permeate, a waste product of the dairy industry, by fermentation with the lactic acid bacterium Lactobacillus casei subsp. casei was investigated. A fermentation medium consisting of permeate and supplements, which enables exponential growth of the organisms, was developed. A fast method for determination of free and immobilized biomass in solid-rich media, based on measurement of cellular ATP, was evolved. Continuous fermentations in a stirred tank reactor (STR) and in a fluidized bed reactor (FBR) with immobilized biomass were compared. In the STR a volumetric productivity of 5.5 g/l per hour at 100% substrate conversion [dilution rate (D) = 0.22 h^–1] was determined. In the FBR porous sintered glass beads were used for immobilization and a maximum biomass concentration of 105 g/kg support was measured. A productivity of 10 g/l per hour was obtained at D = 0.4 h^–1 (substrate conversion 93%) and of 13.5 g/l per hour at D = 1.0 h^–1 (substrate conversion 50%). Offprint requests to: W. Krischke     

Batch and continuous production of propionic acid from whey permeate by Propionibacterium acidi-propionici in a three-electrode amperometric culture system

Summary Growth of Propionibacterium acidi-propionici was studied on lactose as substrate and in acid whey permeate in a three-electrode poised-potential system with cobalt sepulchrate as artificial electron donor. In batch culture experiments in a stirred-tank reactor the substrate was fermented completely to propionic acid up to 6.5 g 1^–1 lactose in a supplemented whey permeate medium. No acetic acid was produced during the growth of P. acidi-propionici. An electron flow of 80–100 mA was obtained and the electron balance was 101%. In continuously growing cultures with 3 g 1^–1 of lactose as the substrate, propionate was formed as the only fermentation product up to a dilution rate (D) of 0.04 h^–1. With D>0.04 h^–1 the bacteria immobilized on the working electrode surface. It was examined whether an electron transfer occurred between the platinum working electrode and the immobilized cells. Correspondence to: W. Trösch     

Fed-batch fermentation for production of Kluyveromyces marxianusFII 510700 cultivated on a lactose-based medium

A strain of Kluyveromyces marxianus was grown in batch culture in lactose-based media at varying initial lactose concentrations (10–60 g L^–1) at 30°C, pH 5.0, dissolved oxygen concentrations greater than 20%. Increasing the concentration of mineral salts three-fold at 40 g L^–1 and 60 g L^–1 initial lactose concentration showed only a small increase in the yield of biomass, from 0.38 g g^–1 to 0.41 g g^–1, indicating that the initial batch cultures were not significantly nutrient- (mineral salts)-limited. A relatively high biomass concentration (105 g L^–1) was obtained in fed-batch culture following extended lactose feeding. An average specific growth rate (0.27 h^–1), biomass yield (0.38 g g^–1) and overall productivity (2.9 g L^–1 h^–1) were obtained for these fed-batch conditions. This fed-batch protocol provides a strategy for achieving relatively high concentrations and productivities of K. marxianus on other lactose-based substrate streams (e.g., whey) from the dairy industry.     

Hollow fibre bioreactor for ethanol production: Application to the conversion of lactose by Kluyveromyces fragilis

Kluyveromyces fragilis cells have been packed into the shell side of an industrial size hollow fibre module. The feed was pumped through the tube side under pressure. During continuous, single-pass operation with a synthetic lactose medium containing 50 g l^?1lactose, ethanol productivity was 30–60 g l^?1h^?1at dilution rates of 1–4 h^?1. With 150 g l^?1lactose concentration, the productivity was 100–135 g l^?1h^?1. Productivity was generally lower when cottage cheese whey permeate (45 g l^?1lactose) was used as the feed. Long-term stability of the hollow fibre bioreactor was good, provided adequate care was taken to bleed the gas generated and restrict cell concentration in the shell side.     

Propionic acid and biomass production using continuous ultrafiltration fermentation of whey

Summary This paper presents a study of propionic acid and propionibacteria production from whey by usingPropionibacterium acidi-propionici in continuous fermentation with cell recycle. The highest propionic acid volumetric productivity achieved was 5 g.l^–1.h^–1 with no biomass bleeding. A maximal biomass concentration of 130 g.l^–1 was achieved before initiating biomass bleeding to give a biomass volumetric productivity of 3.2 g.l^–1.h^–1 with a biomass of 75 g.l^–1 and a propionic acid productivity of 3.6 g.l^–1.h^–1 (for about 100 hours i.e. more than 50 residence times).     

Growth kinetics ofSaccharomyces cerevisiae in batch and fedbatch cultivation using sugarcane molasses and glucose syrup from cassava starch

Growth kinetics ofSaccharomyces cerevisiae in glucose syrup from cassava starch and sugarcane molasses were studied using batch and fed-batch cultivation. The optimum temperature and pH required for growth were 30°C and pH 5.5, respectively. In batch culture the productivity and overall cell yield were 0.31 g L^–1 h^–1 and 0.23 g cells g^–1 sugar, respectively, on glucose syrup and 0.22 g L^–1 h^–1 and 0.18 g cells g^–1 sugar, respectively, on molasses. In fed-batch cultivation, a productivity of 3.12 g L^–1 h^–1 and an overall cell yield of 0.52 g cells g^–1 sugar in glucose syrup cultivation and a productivity of 2.33 g L^–1 h^–1 and an overall cell yield of 0.46 g cells g^–1 sugar were achieved in molasses cultivation by controlling the reducing sugar concentration at its optimum level obtained from the fermentation model. By using an on-line ethanol sensor combined with a porous Teflon^® tubing method in automating the feeding of substrate in the fed-batch culture, a productivity of 2.15 g L^–1 h^–1 with a yield of 0.47 g cells g^–1 sugar was achieved using glucose syrup as substrate when ethanol concentration was kept at a constant level by automatic control.     

Proteins of ruminant colostrum

1. The proteins in the whey of ewe colostrum resemble those obtained from goat colostrum in containing two main electrophoretic components, with mobilities of −2×10⁻⁵ and −3·9×10⁻⁵ cm.²sec.⁻¹v⁻¹ in sodium veronal buffer, pH 8·6 and I 0·1, at 1°. 2. Of 32 samples of goat colostrum examined by paper electrophoresis 27 contained the immune lactoglobulin characteristic of colostrum; of 55 samples of cow colostrum all contained immune lactoglobulin.     

Proteinuria of newborn suckling ruminants

1. The proteins in the whey of ewe colostrum resemble those obtained from goat colostrum in containing two main electrophoretic components, with mobilities of −2×10⁻⁵ and −3·9×10⁻⁵ cm.²sec.⁻¹v⁻¹ in sodium veronal buffer, pH 8·6 and I 0·1, at 1°. 2. Of 32 samples of goat colostrum examined by paper electrophoresis 27 contained the immune lactoglobulin characteristic of colostrum; of 55 samples of cow colostrum all contained immune lactoglobulin.     

Alcohol production from cheese whey permeate using genetically modified flocculent yeast cells.

Alcoholic fermentation of cheese whey permeate was investigated using a recombinant flocculating Saccharomyces cerevisiae, expressing the LAC4 (coding for beta-galactosidase) and LAC12 (coding for lactose permease) genes of Kluyveromyces marxianus enabling for lactose metabolization. Data on yeast fermentation and growth on cheese whey permeate from a Portuguese dairy industry is presented. For cheese whey permeate having a lactose concentration of 50 gL(-1), total lactose consumption was observed with a conversion yield of ethanol close to the expected theoretical value. Using a continuously operating 5.5-L bioreactor, ethanol productivity near 10 g L(-1) h(-1) (corresponding to 0.45 h(-1) dilution rate) was obtained, which raises new perspectives for the economic feasibility of whey alcoholic fermentation. The use of 2-times concentrated cheese whey permeate, corresponding to 100 gL(-1) of lactose concentration, was also considered allowing for obtaining a fermentation product with 5% (w/v) alcohol.     

Influence of exponentially decreasing feeding rates on fed-batch ethanol fermentation of sugar cane blackstrap molasses

Summary The ethanol yield was not affected and the ethanol productivity was increased when exponentially decreasing feeding rates were used instead of constant feeding rates in fed batch ethanol fermentations. The influences of the initial sugar feeding rate on the ethanol productivity, on the constant ethanol production rate during the feeding phase and on the initial ethanol production specific rate are represented by Monod-like equations.Nomenclature F reactor feeding rate (L.h^–1) - F_o initial reactor feeding rate (L.h^–1) - K time constant; see equation (l) (h^–1) - M_E mass of ethanol in the fermentor (g) - M_s mass of TRS in the fermentor (g) - M_x mass of yeast cells (dry matter) in the fermentor (g) - P ethanol productivity (g.L^–1.h^–1) - R ethanol constant production rate during the feeding phase (g.h^–1) - s standard deviation - S_o TRS concentration in the feeding mash (g.L^–1) - t time (h) - T fermentor filling-up-time (h) - T time necessary to complete the fermentation (h) - TRS total reducing sugars calculated as glucose (g.L^–1) - V_o volume of the inoculum (L) - V_f final volume of medium in the fermentor (L) - X_o yeast concentration of the inoculum (dry matter) (g.L^–1) - ethanol yield (% of the theoretical value) - initial specific rate of ethanol production (h^–1)     

Utilisation of cheese whey as an alternative growth medium for recombinant strains of Kluyveromyces marxianus

Kluyveromyces marxianus KMDB-1, a plasmid-bearing recombinant, not carrying any particular gene of relevance, derived from auxotrophic strain KMS-2 (ura ^–), grew in cheese whey with a maximum specific growth rate of 0.34 h^–1. This recombinant strain showed the same lactose uptake and extracellular protease production kinetics as the wild type CBS6556 with no evidence of catabolite repression. The plasmid was retained in 50% of cells after 36 h of batch culture. The presence of this vector in Kluyveromyces marxianus, which possesses no natural plasmids, together with the absence of any metabolic loading effect, creates a suitable microbial system for cheese whey processing for potential value-added product formation.     

Ethanol production in a continuous fermentation/membrane pervaporation system

The productivity of ethanol fermentation processes, predominantly based on batch operation in the U.S. fuel ethanol industry, could be improved by adoption of continuous processing technology. In this study, a conventional yeast fermentation was coupled to a flat-plate membrane pervaporation unit to recover continuously an enriched ethanol stream from the fermentation broth. The process employed a concentrated dextrose feed stream controlled by the flow rate of permeate from the pervaporation unit via liquid-level control in the fermentor. The pervaporation module contained 0.1 m² commercially available polydimethylsiloxane membrane and consistently produced a permeate of 20%–23% (w/w) ethanol while maintaining a level of 4%–6% ethanol in a stirred-tank fermentor. The system exhibited excellent operational stability. During continuous operation with cell densities of 15–23 g/l, ethanol productivities of 4.9–7.8 gl^–1 h^–1 were achieved utilizing feed streams of 269–619 g/l glucose. Pervaporation flux and ethanol selectivities were 0.31–0.79 lm^–2 h^–1 and 1.8–6.5 respectively.