Liquid chromatographic analysis of amino acids: Using dimethylamino-azobenzenesulfonyl chloride and hypersil ODS column to analyze the composition of apo B peptides

A reliable high-performance liquid chromatography (HPLC) method is described for the separation of dimethylamino-azobenzenesulfonyl-amino acid (DABS-AA). The separation is accomplished by reversed-phase chromatography on a Hypersil ODS column (4.6×150 mm) withe a Hewlett-Packard liquid chromatography system. In addition to the developed sample and solvent preparation procedure, this precolumn modification method using dimethylaminoazobenzene sulfonyl chloride (DABS-CL) for amino acid analysis is proved reliable and sensitive. Five apolipoprotein B-100 tryptic peptides, two of them containing cysteine, were demonstrated as examples for the general application of this method in amino acid analysis. It is a useful method for analysis of cysteine- and cysteine-containing peptide and, furthermore, for determination of sulfhydryl and disulfide linkages of proteins.     

The use of fluorescamine as a detection reagent in protein microcharacterization

With recent advances in protein microchemistry, compatible methods for the preparation and quantitation of proteins and peptides are required. Fluorescamine, a reagent which reacts with primary amino groups has been used successfully to detect amino acids, peptides, and proteins in various micromethods. This article discusses these methods which include (1) amino acid analysis of protein and peptide hydrolysates with postcolumn fluorescamine derivatization; (2) purification and characterization of proteins and peptides by reversed-phase HPLC with postcolumn fluorescamine derivatization; (3) purification of peptides by two-dimensional chromatography and electrophoresis on thin-layer cellulose with fluorescamine staining; and (4) electroblotting of protein bands from SDS-PAGE to glass fiber filters and polyvinylidene difluoride (PVDF) membranes with fluorescamine staining. In addition, this article also compares a postcolumn fluorescamine detection system with a UV detection system in the applications of amino acid analysis and reversed-phase HPLC protein/peptide analysis.     

Identification of the C-terminally alpha-amidated amino acid in peptides by high-performance liquid chromatography

A sensitive method for the rapid identification of the C-terminally amidated amino acid in peptides is described. Peptides containing the alpha-amide group at the C-terminus were cleaved with endopeptidases. The fragments released (oligopeptides, amino acids and the C-terminally amidated residue) are coupled to phenylisothiocyanate. The phenylthiocarbamoyl derivative of the amino acid alpha-amide is selectively extracted from the mixture by alkaline butyl acetate and identified by a high-performance liquid chromatography system that enables rapid and complete separation of the derivatives of 17 amino acid amides at a detection limit of 20-50 pmol. The C-terminal alpha-amides of neurokinin-A (Met-NH2), mammalian secretin (Val-NH2), pancreatic polypeptide (Tyr-NH2) and peptide HI (Ile-NH2) are unequivocally determined at a level of 0.5-2 nmol per peptide. This method was used to characterize a crude peptide fraction prepared from porcine brain. Cholecystokinin-58 was identified in this fraction by detection of phenylthiocarbamoyl-phenylalaninamide. The method is suitable for the identification of the C-terminal alpha-amidated residue of purified peptides, but can also be used as a screening strategy to isolate from complex biological extracts novel peptides containing an alpha-amidated amino acid at the C-terminus.     

Recombinant Fusion Proteins for the Industrial Production of Disulfide Bridge Containing Peptides: Purification, Oxidation without Concatamer Formation, and Selective Cleavage

We report the biotechnical production of peptides of approximately 35–50 amino acids in length containing one intramolecular disulfide bridge, using a recombinant fusion tail approach. This method fills the technological gap when either (a) chemical synthesis fails due to known problematic peptide sequences or (b) if simple recombinant expression is unsuccessful due to degradation. The fusion tail described here serves several purposes: (i) it enables high expression levels inEscherichia colito be achieved; (ii) it renders the fusion protein fairly soluble; (iii) it contains a histidine affinity tag for easy purification on Ni-chelate resins, which also serves as a catalyst for the oxygen-dependent formation of the disulfide bridge; and (iv) it suppresses the formation of concatamers during the oxidation process through steric hindrance. The purified fusion protein is then immobilized on a reversed phase column for two purposes: (i) chemical cleavage of the fusion tail by cyanogen bromide and (ii) subsequent purification of the peptide. A very hydrophilic fusion partner is required so that immobilization on the reversed phase column always occurs due to the peptide. Sensitive hydrophobic residues are thereby protected from the cleavage reagent while the cleaved hydrophilic fusion tail is easily separated from the hydrophobic peptide. The method is exemplified by eight peptides representing an immunodominant epitope of the human immunodeficiency virus, but may be useful for a significant variety of similar peptides.     

Gas chromatographic analysis of amino acid enantiomers in Carbetocin peptide hydrolysates after fast derivatization with pentafluoropropyl chloroformate

A novel sample preparation protocol for gas chromatographic (GC) analysis of amino acid enantiomers in peptides was developed. It comprises traditional acid hydrolysis, a novel treatment of the analytes with a fluoroalkyl chloroformate and GC/FID separation of enantiomers on a chiral capillary column. The major improvements consist in that the derivatization step proceeds in organic-aqueous media within seconds and the amino acid derivatives are volatile enough to suit the temperature range of the chiral Chirasil-Val capillary column. The approach was found beneficial for chiral analysis of pharmaceutically important Carbetocin peptide.     

Isolation and Characterization of Neutral Peptides in Soy Sauce

A soy sauce sample was fractionated by gel filtration on a Sephadex G–15 column, then the fractions were subfractionated on the basis of acidity by ion exchange chromatography on a QAE-Sephadex A–25 column. After preliminary fractionation, the components in the neutral subfractions were transformed to copper salts, and the salts were chromatographed on a DEAE-Sephadex A–25 column with a borate buffer and aqueous acetic acid to separate neutral peptide substances from a large amount of free amino acids. The peptide fractions were further fractionated on a preparative amino acid analyzer and by paper chromatography to separate the peptide substances.

Three glycodipeptides and eight dipeptides were isolated and characterized as the major neutral peptide components in soy sauce. However, it was difficult to anticipate any direct contribution of these peptides to the flavor construction in soy sauce on the basis of their taste intensities and contents.     

Relationship between Bitterness of Peptides and their Chemical Structures

Various peptides and derivatives of peptides and amino acids were synthesized and tasted, systematically, to elucidate the relationship between bitterness and chemical structures of peptides.

We have found that: 1. Peptides become more bitter than the original amino acids when their amino and carboxyl groups are blocked and when peptide bond is formed. 2. A peptide molecule with a high content of amino acids with hydrophobic side chains will develop bitter taste. 3. The amino acids in a peptide chain independently contribute to bitterness regardless of amino acid sequences and configuration.     

Use of proline-specific endopeptidase in the isolation of all four "native" disulfides of hen egg white lysozyme

The disulfide peptides from the tryptic digestion of cyanogen bromide-treated hen egg white lysozyme (HEWL) were isolated by reverse phase high performance liquid chromatography (HPLC) and identified by amino acid analysis. Three peptides containing the I-VIII, II-VII, and III-V + IV-VI disulfide bonds were obtained. The two-disulfide peptide was further digested with proline-specific endopeptidase (PCE) (EC 3.4.21.26). Amino acid analysis of digest peptides separated by HPLC showed four peptides with the IV-VI disulfide bond as well as a peptide with the III-V disulfide bond. The IV-VI peptides were produced by hydrolysis of several alanine-X bonds as well as the prolyl-cystine bond. Our studies show that alanyl peptide bonds to lysyl, seryl, and leucyl residues are susceptible to hydrolysis by PCE preparations, thus substantially extending its known specificity range. The two-disulfide peptide was also digested sequentially with thermolysin and PCE; the resulting IV-VI and III-V peptides were identified by HPLC and amino acid analysis. PCE showed substantial activity at pH 5.3 as well as at pH 8.3. The lower pH is useful in studies of proteins or peptides where base-catalyzed reactions must be limited.     

Synthesis of N alpha-(tert-butoxycarbonyl)-N epsilon-[N-(bromoacetyl)-beta-alanyl]-L-lysine: its use in peptide synthesis for placing a bromoacetyl cross-linking function at any desired sequence position.

A new amino acid derivative, N alpha-(tert-butoxycarbonyl)-N epsilon-[N-(bromoacetyl)-beta-alanyl]-L-lysine (BBAL), has been synthesized as a reagent to be used in solid-phase peptide synthesis for introducing a side-chain bromoacetyl group at any desired position in a peptide sequence. The bromoacetyl group subsequently serves as a sulfhydryl-selective cross-linking function for the preparation of cyclic peptides, peptide conjugates, and polymers. BBAL is synthesized by condensation of N-bromoacetyl-beta-alanine with N alpha-Boc-L-lysine and is a white powder which is readily stored, weighed, and used with a peptide synthesizer, programmed for N alpha-Boc amino acid derivatives. BBAL residues are stable to final HF deprotection/cleavage. BBAL peptides can be directly coupled to other molecules or surfaces which possess free sulfhydryl groups by forming stable thioether linkages. Peptides containing both BBAL and cysteine residues can be self-coupled to produce either cyclic molecules or linear peptide polymers, also linked through thioether bonds. Products made with BBAL peptides may be characterized by amino acid analysis of acid hydrolyzates by quantification of beta-alanine, which separates from natural amino acids in suitable analytical systems. Where sulfhydryl groups on coupling partners arise from cysteine residues, S-(carboxymethyl)cysteine in acid hydrolyzates may also be assayed for this purpose. Examples are given of the use of BBAL in preparing peptide polymers and a peptide conjugate with bovine albumin to serve as immunogens or model vaccine components.     

A combined bioinformatic approach oriented to the analysis and design of peptides with high affinity to MHC class I molecules

We report on a new method to compute the antigenic degree of peptides from available experimental data on peptide binding affinity to class I MHC molecules. The methodology is a combination of two strategies at different levels of information. The first, at the primary structure level, consists in expressing the peptides binding activity as a profile of amino acid contributions, amino acid similarity being accounted for by their characteristic physicochemical properties and their position within the sequence. The higher level of the strategy is based on a meticulous analysis of the contact interface of the peptides with the cleft constituting the receptor region of a particular class I MHC molecule. Interaction interfaces are inferred by docking the peptide onto the receptor groove of the MHC molecule; evaluation of the affinity of the peptide to the receptor is then performed by analysis of the electrostatic and hydrophobic energies on points of the interaction interface.The result is a robust system for analysis of peptide affinity to class I MHC molecules since while the first analysis dictates the composition of active sequences at the amino acid level, the second translates this information to the atomic level, where the molecular interaction can be analyzed in terms of the intrinsic interatomic forces and energies. Evaluation results for the methodology are encouraging since high affinity peptides are reflected by high scores at both levels of information, and are proportionally lower for peptides of medium and lower affinity for which interaction surfaces show relatively lower electrostatic complementarity and hydrophobic correlation than for the former.     

Protein chemistry of the Neurospora crassa plasma membrane H+-ATPase

A highly effective procedure for fragmenting the Neurospora crassa plasma membrane H+-ATPase and purifying the resulting peptides is described. The enzyme is cleaved with trypsin to form a limit digest containing both hydrophobic and hydrophilic peptides, and the hydrophobic and hydrophilic peptides are then separated by extraction with an aqueous ammonium bicarbonate solution. The hydrophilic peptides are fractionated by Sephadex G-25 column chromatography into three pools, and the individual peptides in each pool are purified by high-performance liquid chromatography. The hydrophobic peptides are dissolved in neat trifluoroacetic acid (TFA), diluted with chloroform-methanol (1:1), and the hydrophobic peptide solution thus obtained is then fractionated by Sephadex LH-60 column chromatography in chloroform-methanol (1:1) containing 0.1% TFA. The recoveries in all of the above procedures are greater than 90%. The N-terminal amino acid sequences of three of the hydrophobic H+-ATPase peptides purified by this methodology have been determined, which establishes the position of these peptides in the 100,000 Da polypeptide chain by reference to the published gene sequence, and documents the sequencability of the hydrophobic peptides purified in this way. This methodology should facilitate the identification of a variety of amino acid residues important for the structure and function of the H+-ATPase molecule. Moreover, the overall strategy for working with the protein chemistry of the H+-ATPase should be applicable to other amphiphilic integral membrane proteins as well.     

Dehydroalanine-containing peptides: preparation from phenylselenocysteine and utility in convergent ligation strategies

This protocol describes the methodology for the synthesis of dehydroalanine (Dha)-containing peptides and illustrates their use in convergent ligation strategies for the preparation of peptide conjugates. A nonproteinogenic amino acid, Fmoc-Se-phenylselenocysteine (SecPh), can be prepared in high yield over four synthetic steps and be conveniently incorporated into peptides by standard solid-phase peptide synthesis techniques. Globally deprotected peptides containing phenylselenocysteine can be converted to dehydrated peptides following a chemoselective, mild oxidation with hydrogen peroxide or sodium periodate (i.e., the phenylselenocysteine side chain is converted to that of Dha). Dha residues are electrophilic handles for the preparation of glycopeptides, lipopeptides or other peptide conjugates; one such transformation will be outlined here. The preparation of Dha-containing peptides, including the synthesis of SecPh, peptide elongation and oxidative treatment of phenylselenocysteine-containing peptides can be completed by one person in approximately 3-5 weeks. However, once SecPh is in hand, the time required for the preparation of peptides is significantly shorter and comparable to that for any peptide synthesis.     

Identification of peptides containing tryptophan, tyrosine, and phenylalanine using photodiode-array spectrophotometry

The characteristic absorption spectra of aromatic amino acids between 240 and 310 nm were used to identify tryptophan, tyrosine, and phenylalanine-containing peptides. In acidic solution, the absorption spectra of these amino acids exhibit minima or maxima at 255, 270, and 286 nm. Based on these characteristics, the content of the aromatic amino acid in peptide can be estimated. For this study, 2 nmol of tryptic peptides from human apolipoprotein A-1 was separated by high-performance liquid chromatography using a reverse-phase column. The peptide fragments were monitored by a photodiode-array spectrophotometer. This new approach offers a rapid, simple, sensitive, and direct identification of peptides containing aromatic amino acids. Those containing Trp, which may be of interest for DNA sequencing and important in sequence analysis of proteins, can be selectively purified using this technique.     

Genetic Selection of Poliovirus 2Apro-Binding Peptides

The yeast two-hybrid system has been used to identify mammalian clones that interact with poliovirus 2A proteinase (2A^pro). Eight clones which encode previously unidentified human proteins were selected from a HeLa cell cDNA expression library. In addition, five clones encoding short peptides that interact with poliovirus 2A^pro were also identified. The lengths of these peptides range from 6 to 30 amino acids, but all of them contain the Leu-X-Thr-Z motif (X represents any amino acid; Z represents a hydrophobic residue). This sequence is invariably located just at the carboxy terminus of each peptide. This approach raises the possibility of designing substrate analogue inhibitors of 2A^pro. Thus, two nonhydrolyzable peptides containing the Leu-X-Thr-Z motif prevented cleavage of eukaryotic initiation factor 4G by poliovirus 2A^pro in vitro. A more general method for identifying peptides with antiproteinase activity is discussed.     

Peptides from a mycobacillin-synthesizing cell-free system

In a cell-free system from Bacillus subtilis B(3), ATP-P(i) exchange was catalysed by l-proline at a pH optimum of 7.2. Further stimulation by component amino acids of mycobacillin was inhibited by deprivation from the synthesizing system of even a single amino acid occurring at any point of the cyclic peptide. This inhibition, however, decreased with the distance in the molecule of the given amino acid from l-proline. Peptides containing respectively two, three, four, five and six amino acids were isolated from the mycobacillin-synthesizing system by an amino acid-deprivation technique. The amino acid composition of these peptides and also their N- and C-terminal amino acid residues were the same as those of peptides that would be obtained if mycobacillin synthesis occurred starting from l-proline and was interrupted at various points along the polypeptide chain.     

Rational Design of a Carrier Protein for the Production of Recombinant Toxic Peptides in Escherichia coli

Commercial uses of bioactive peptides require low cost, effective methods for their production. We developed a new carrier protein for high yield production of recombinant peptides in Escherichia coli very well suited for the production of toxic peptides like antimicrobial peptides. GKY20, a short antimicrobial peptide derived from the C-terminus of human thrombin, was fused to the C-terminus of Onconase, a small ribonuclease (104 amino acids), which efficiently drove the peptide into inclusion bodies with very high expression levels (about 200–250 mg/L). After purification of the fusion protein by immobilized metal ion affinity chromatography, peptide was obtained by chemical cleavage in diluted acetic acid of an acid labile Asp-Pro sequence with more than 95% efficiency. To improve peptide purification, Onconase was mutated to eliminate all acid labile sequences thus reducing the release of unwanted peptides during the acid cleavage. Mutations were chosen to preserve the differential solubility of Onconase as function of pH, which allows its selective precipitation at neutral pH after the cleavage. The improved carrier allowed the production of 15–18 mg of recombinant peptide per liter of culture with 96–98% purity without the need of further chromatographic steps after the acid cleavage. The antimicrobial activity of the recombinant peptide, with an additional proline at the N-terminus, was tested on Gram-negative and Gram-positive strains and was found to be identical to that measured for synthetic GKY20. This finding suggests that N-terminal proline residue does not change the antimicrobial properties of recombinant (P)GKY20. The improved carrier, which does not contain cysteine and methionine residues, Asp-Pro and Asn-Gly sequences, is well suited for the production of peptides using any of the most popular chemical cleavage methods.     

Cyanogen bromide digestion of the avian myeloblastosis virus pp19 protein: isolation of an amino-terminal peptide that binds to viral RNA.

The avian myeloblastosis virus pp19 protein was separated from the other virus proteins by a rapid and simple purification procedure which yields milligram amounts of homogeneous protein. This protein was then fragmented by digestion with cyanogen bromide. When the mixture of the cyanogen bromide peptides was passed through a 60S avian myeloblastosis virus RNA-cellulose column, only one peptide bound with high affinity to the resin. The peptide migrated on a sodium dodecyl sulfate-polyacrylamide gel with an approximate molecular weight of 2,900 and will be referred to as the p3B peptide. This peptide was also isolated directly by chromatography of the cyanogen bromide-digested pp19 protein on a reverse-phase high-pressure liquid chromatography column. It was again the only cyanogen bromide peptide of the pp19 protein that bound to the RNA affinity resin. The p3B peptide is a basic peptide, as was seen by its rapid migration on acid-urea-polyacrylamide gels and its amino acid composition. A partial amino acid sequence analysis of the p3B peptide indicated that it was derived from the amino terminus of the intact protein. Although the p3B peptide bound to 60S RNA, it did not demonstrate the selective binding of native pp19 to regions of the RNA containing secondary structure.     

A simple method of prediction of visibility of peptides in mass spectrometry with electrospray ionization

A new method for selection of essential peptides applicable for protein detection and quantification analysis in the targeted positive electrospray mass spectrometry has been proposed. It is based on the prediction of the normalized abundance of the mass spectrometric peaks by using a linear regression model. This method has the following a priori restrictions: first selection of peptides must be arranged so that at pH 2.5 the tested peptides must be presented mainly as the 2⁺ and 3⁺ ions. Only peptides containing C-terminal lysine or arginine residues should be considered. The amino acid composition of the peptide, the peptide concentration, the ratio of the polar surface of peptide to common surface and ratio of the polar volume to the common volume are used as independent variables. Among several considered combinations of variables the best linear regression model had a determination coefficient in leave-one-out cross-validation procedure of 0.54. This model confidently discriminated peptides with high response ability and peptides with low response ability, and therefore it is applicable for selection of the most favorable peptides among peptides selected by means of simple criteria. This simple and fast screening method can be successfully applied to reduce the list of observed peptides.     

Automated carboxy-terminal sequence analysis of peptides.

Proteins and peptides can be sequenced from the carboxy-terminus with isothiocyanate reagents to produce amino acid thiohydantoin derivatives. Previous studies in our laboratory have focused on solution phase conditions for formation of the peptidylthiohydantoins with trimethylsilylisothiocyanate (TMS-ITC) and for hydrolysis of these peptidylthiohydantoins into an amino acid thiohydantoin derivative and a new shortened peptide capable of continued degradation (Bailey, J. M. & Shively, J. E., 1990, Biochemistry 29, 3145-3156). The current study is a continuation of this work and describes the construction of an instrument for automated C-terminal sequencing, the application of the thiocyanate chemistry to peptides covalently coupled to a novel polyethylene solid support (Shenoy, N. R., Bailey, J. M., & Shively, J. E., 1992, Protein Sci. I, 58-67), the use of sodium trimethylsilanolate as a novel reagent for the specific cleavage of the derivatized C-terminal amino acid, and the development of methodology to sequence through the difficult amino acid, aspartate. Automated programs are described for the C-terminal sequencing of peptides covalently attached to carboxylic acid-modified polyethylene. The chemistry involves activation with acetic anhydride, derivatization with TMS-ITC, and cleavage of the derivatized C-terminal amino acid with sodium trimethylsilanolate. The thiohydantoin amino acid is identified by on-line high performance liquid chromatography using a Phenomenex Ultracarb 5 ODS(30) column and a triethylamine/phosphoric acid buffer system containing pentanesulfonic acid. The generality of our automated C-terminal sequencing methodology was examined by sequencing model peptides containing all 20 of the common amino acids. All of the amino acids were found to sequence in high yield (90% or greater) except for asparagine and aspartate, which could be only partially removed, and proline, which was found not be capable of derivatization. In spite of these current limitations, the methodology should be a valuable new tool for the C-terminal sequence analysis of peptides.     

Extensive post-translational modification, including serine to D-alanine conversion, in the two-component lantibiotic, lacticin 3147

Lacticin 3147 is a two-component bacteriocin produced by Lactococcus lactis subspecies lactis DPC3147. In order to further characterize the biochemical nature of the bacteriocin, both peptides were isolated which together are responsible for the antimicrobial activity. The first, LtnA1, is a 3,322 Da 30-amino acid peptide and the second component, LtnA2, is a 29-amino acid peptide with a mass of 2,847 Da. Conventional amino acid analysis revealed that both peptides contain the thioether amino acid, lanthionine, as well as an excess of alanine to that predicted from the genetic sequence of the peptides. Chiral phase gas chromatography coupled with mass spectrometry of amino acid composition indicated that both LtnA1 and LtnA2 contain D-alanine residues and amino acid sequence analysis of LtnA1 confirmed that the D-alanine results from post-translational modification of a serine residue in the primary translation product. Taken together, these results demonstrate that lacticin 3147 is a novel, two-component, D-alanine containing lantibiotic that undergoes extensive post-translational modification which may account for its potent antimicrobial activity against a wide range of Gram-positive bacteria.