Solvatochromic study of 3‐N‐(N′‐methylacetamidino)benzanthrone and its interaction with dopamine by the fluorescence quenching mechanism

The change in photophysical properties of the organic molecule due to solvatochromic effect caused by different solvent environments at room temperature gives information about the dipole moments of 3‐N‐(N′‐methylacetamidino)benzanthrone (3‐MAB). The quantum yield, fluorescence lifetime of 3‐MAB was measured in different solvents to calculate radiative and non‐radiative rate constants. The results revealed that the excited state dipole moment (μ_e) is relatively larger compared to the ground state dipole moment (μ_g), indicating the excited state of the dye under study is more polar than the ground state and the same trend is noticed with theoretical calculations performed using the CAM‐B3LYP/6‐311+G(d,p) method. Further, the study on preferential solvation was carried out for 3‐MAB dye in ethyl acetate–methanol solvent mixture. The fluorescence quenching method has been employed for the detection of dopamine using 3‐MAB as fluorescent probe, using steady‐state and time resolved methods at room temperature. The method enables dopamine in the micro molar range to be detected. Also, an attempt to verify the quenching process by employing different models has been tried. Various rate parameters are measured using these models, our results indicates the quenching process is diffusion limited.     

A fluorescence study of differently substituted 3‐styrylindoles and their interaction with bovine serum albumin

Interaction of 3‐styrylindoles 1–8 viz. 3‐(2‐phenylethenyl‐E)‐NH‐indole (1), 3‐[2‐(4‐nitrophenyl)ethenyl‐E]‐NH‐indole (2), 5‐bromo‐3‐[2‐(4‐nitrophenyl)ethenyl‐E]‐NH‐indole (3), 5‐methoxy‐3‐[2‐(4‐nitrophenyl)ethenyl‐E]‐NH‐indole (4), 3‐[2‐(4‐cyanophenyl)ethenyl‐E]‐NH‐indole (5), 3‐[2‐(4‐cyanophenyl)ethenyl‐E]‐N‐ethylindole (6), 5‐bromo‐3‐[2‐(4‐chlorophenyl)ethenyl‐E]‐NH‐indole (7) and 5‐methoxy‐3‐[2‐(4‐chlorophenyl)ethenyl‐E]‐NH‐indole (8) with bovine serum albumin (BSA) was examined by UV–vis and steady‐state fluorescence spectroscopy. The fluorescence intensity of 1–8 increases with the increasing BSA concentration. Upon binding with BSA, while 1 and 5–8 show a blue shift in their λ_{f max}, 2–4 do not exhibit such behavior. Compounds 1–8 also quench the 345 nm fluorescence of BSA in phosphate buffer (λ_ex, 280 nm). These compounds intercalate in the hydrophobic regions of BSA, as evidenced by the determination of BSA binding site micropolarity using compounds 2–8. As evidenced by the estimation of energy transfer efficiency and distance between the donor (BSA‐Trp‐212) and the acceptor (3‐styrylindoles), the halo‐substituted compounds 3 and 7 interact with BSA more effectively than the other 3‐strylindoles. These compounds have potential for use as neutral and hydrophobic fluorescence probes for examining the microenvironments in proteins, polymers, micelles, etc. Copyright © 2008 John Wiley & Sons, Ltd.     

Interaction of β‐cyclodextrin‐capped CdSe quantum dots with inorganic anions and cations

A facile method was developed for the preparation of water soluble β‐Cyclodextrin (β‐CD)‐modified CdSe quantum dots (QDs) (β‐CD‐QDs) by directly replacing the oleic acid ligands on the QDs surface with β‐CD in an alkaline aqueous solution. The as‐prepared QDs show good stability in aqueous solution for several months. Oxoanions, including phosphoric acid ion, sulphite acid ion and carbonic acid ion, affect the fluorescence of β‐CD‐QDs. Among them, H₂PO₄^– exhibited the largest quenching effect. For the polyprotic acids (HO)₃AO, the effect of acidic anions on the fluorescence of β‐CD‐QDs was in the order: monoanion (HO)₂AO₂^– > dianion (HO)AO₃^2– >> trianion AO₄^3–. After photoactivation for several days in the presence of anions at alkaline pH, the β‐CD‐QDs exhibited strong fluorescence emission. The effect of various heavy and transition metal ions on the fluorescence properties of the β‐CD‐QDs was investigated further. It was found that Ag⁺, Hg²⁺ and Co²⁺ have significant quenching effect on the fluorescence of the β‐CD‐QDs. The Stern–Volmer quenching constants increased in the order: Hg²⁺ < Co²⁺ <Ag⁺. The adsorption model of metal ions on β‐CD‐QDs was explored. Copyright © 2011 John Wiley & Sons, Ltd.     

Solvent effect on the relative quantum yield and fluorescence quenching of a newly synthesized coumarin derivative

We estimated the relative florescence quantum yield (Φ) of 8‐methoxy‐3‐[1‐(4,5‐dicarbomethoxy‐1,2,3‐triazoloacetyl)]coumarin [8MDTC] using a single‐point method with quinine sulfate in 0.1 M of sulfuric acid used as a standard reference. The fluorescence lifetimes, radiative and non‐radiative decay rate constants are calculated. Relative quantum yields were found to be less in the non‐polar solvents, indicating that the solute exhibits less fluorescence in a non‐polar environment. The fluorescence quenching of [8MDTC] by aniline was studied at room temperature by examining the steady state in five different solvents in order to explore various possible quenching mechanisms. The experimental results show a positive deviation in Stern–Volmer plots in all solvents. Ground state complex and sphere of action static quenching models were used to interpret the results. Many quenching rate parameters were calculated using these models. The values of these parameters suggest that the sphere of action static quenching model agrees well with the experimental results. Further, a finite sink approximation model was used to check whether these bimolecular reactions were diffusion limited or not. The values of the distance parameter R′ and the diffusion coefficient D were determined and are compared with the values of the encounter distance R and diffusion coefficient D calculated using the Stokes–Einstein equation. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis and study on the binding of thiazol‐2(3H)‐ylidine derivative with human serum albumin using spectroscopic and molecular docking methods

In this article, a facile and convenient synthesis of thiazol‐2(3H)‐ylidine derivatives of fatty acid ( 3a – c ) is described. The binding of N′‐(4,5‐dimethyl‐3‐penylthiazol‐2(3H)‐ylidine)octadec‐9‐enehydrazide ( 3a ) with human serum albumin (HSA) is explored using various spectral methods and molecular docking. Fluorescence quenching results show that 3a induces conformational changes in HSA and the polarity around the tryptophan residues is increased. Stern–Volmer quenching plots at different temperatures (298, 305 and 312 K) show that the fluorescence quenching mechanism is static quenching. Synchronous fluorescence, 3D fluorescence spectra, circular dichroism and Fourier transform infrared spectroscopy are used to determine the structural change in HSA on interaction with 3a . Förster resonance energy transfer analysis shows that the binding distance (r₀ = 2.78 nm) between HSA (Trp214) and 3a is within the of range 2–8 nm for quenching to occur. The molecular docking study also confirms that 3a is located in subdomain IIA (site I) of HSA and is stabilized by hydrogen bonding and hydrophobic forces.     

Spectral investigations on Eu3+,Sm3+‐doped and Sm3+/Eu3+ co‐doped potassium‐fluoro‐phosphate glass emitting intense orange‐red for lighting applications

Potassium fluoro‐phosphate (KFP) glass singly doped with different concentrations of europium (Eu³⁺) or samarium (Sm³⁺) or co‐doped (Sm³⁺/Eu³⁺) was prepared, and their luminescence spectra were investigated. The phase composition of the product was verified by X‐ray diffraction analysis. Optical transition properties of Eu³⁺ in the studied potassium phosphate glass were evaluated in the framework of the Judd–Ofelt theory. The radiative transition rates (A_R), fluorescence branching ratios (β), stimulated emission cross‐sections (σ_e) and lifetimes (τ_exp) for certain transitions or levels were evaluated. Red emission of Eu³⁺ was exhibited mainly by the ⁵D₀→⁷F₂ transition located at 612 nm. Concentration quenching and energy transfer were observed from fluorescence spectra and decay curves, respectively. It was found that the lifetimes of the ⁵D₀ level increased with increase in concentration and then decreased. By co‐doping with Sm³⁺, energy transfer from Sm³⁺ to Eu³⁺ occurred and contributed to the enhancement in emission intensity. Intense orange‐red light emission was obtained upon sensitizing with Sm³⁺ in KFP glass. This approach shows significant promise for use in reddish‐orange lighting applications. The optimized properties of the Sm³⁺/Eu³⁺ co‐doped potassium phosphate glass might be promising for optical materials.     

Synthesis of a novel fluorescent probe based on 7‐nitrobenzo‐2‐oxa‐1,3‐diazole skeleton for the rapid determination of vitamin B12 in pharmaceuticals

A new fluorescent probe, 4‐N,N‐di(2‐hydroxyethyl)imino‐7‐nitrobenzo‐2‐oxa‐1,3‐diazole (HINBD) was synthesized in a single step with reasonably good yield. The water‐soluble HINBD emits strongly in the visible region (λ_ex = 479 nm, λ_em = 545 nm) and is stable over a wide range of pH values. It was found that vitamin B₁₂ (VB₁₂) had the ability to quench the fluorescence of HINBD, and the quenched fluorescence intensity was proportional to the concentration of VB₁₂. A method for VB₁₂ determination based on the quenching fluorescence of HINBD was thus established. Interference effects of various substances, including sugars, vitamins, amino acids, inorganic cations and some organic substances have been studied. Under optimal conditions, the linear range is 0.0–2.4 × 10^–5 mol/L. The determination limit is 8.3 × 10^–8 mol/L. The method was applied to measure VB₁₂ in pharmaceutical preparations with satisfactory results. Copyright © 2013 John Wiley & Sons, Ltd.     

Determination of p‐Aminobenzenesulfonic acid based on the electrochemiluminescence quenching of tris (2,2’‐bipyridine)‐ ruthenium (II)

This study describes the quenching effects of p‐aminobenzenesulfonic acid (p‐ABSA) based on electrochemiluminescence (ECL) of the tris (2,2^’‐bipyridyl)‐ruthenium(II)(Ru(bpy)₃²⁺)/tri‐n‐propylamine (TPrA) system in aqueous solution. Quenching behaviours were observed with a 200‐fold excess of p‐ABSA over Ru(bpy)₃²⁺. In the presence of 0.1 M TPrA, the Stern‐Volmer constant (K_SV) of ECL quenching was as high as 1.39 × 10⁴ M^‐1 for p‐ABSA. The logarithmic plot of inhibited ECL versus concentration of p‐ABSA was linear over the range of 6.0 × 10^‐6 ‐3.0 × 10^‐4 mol/L. The corresponding limit of detection was 1.2 × 10^‐6 mol/L for p‐ABSA (S/N = 3). The mechanism of quenching is believed to involve an energy transfer from the excited‐state luminophore to a dimer of p‐ABSA and the adsorption of free radicals of p‐ABSA at the electrode surface that impeded the oxidation of the Ru(bpy)₃²⁺/TPrA system. Copyright © 2012 John Wiley & Sons, Ltd.     

Determination of bergenin based on the electrochemiluminescence quenching of tris(2,2′‐bipyridine)‐ruthenium(II)

Quenching effects of bergenin, based on the electrochemiluminescence (ECL) of the tris(2,2′‐bipyridyl)‐ruthenium(II) (Ru(bpy)₃²⁺)/tri‐n‐propylamine (TPrA) system in aqueous solution, is been described. The quenching behavior can be observed with a 100‐fold excess of bergenin over Ru(bpy)₃²⁺. In the presence of 0.1 m TPrA, the Stern–Volmer constant (K_SV) of the ECL quenching is as high as 1.16 × 10⁴ M^?1 for bergenin. The logarithmic plot of the inhibited ECL versus logarithmic plot of the concentration of bergenin was linear over the range 3.0 × 10^?6–1.0 × 10^?4 mol/L. The corresponding limit of detection was 6.0 × 10^?7 mol/L for bergenin (S/N = 3). In the mechanism of quenching it is believed that the competition of the active free radicals between Ru(bpy)₃²⁺/TPrA and bergenin was the key factor for the ECL inhibition of the system. Photoluminescence, cyclic voltammetry, coupled with bulk electrolysis, supports the supposition mechanism of the Ru(bpy)₃²⁺/TPrA–bergenin system. Copyright © 2015 John Wiley & Sons, Ltd.     

Study of the interaction between sodium salts of (2E)‐3‐(4'‐halophenyl)prop‐2‐enoyl sulfachloropyrazine and bovine serum albumin by fluorescence spectroscopy

Three sodium salts of (2E)‐3‐(4'‐halophenyl)prop‐2‐enoyl sulfachloropyrazine (CCSCP) were synthesized and their structures were determined by ¹H and ¹³C NMR, LC‐MS and IR. The binding properties between CCSCPs and bovine serum albumin (BSA) were studied using fluorescence spectroscopy in combination with UV–vis absorbance spectroscopy. The results indicate that the fluorescence quenching mechanisms between BSA and CCSCPs were static quenching at low concentrations of CCSCPs or combined quenching (static and dynamic) at higher CCSCP concentrations of 298, 303 and 308 K. The binding constants, binding sites and corresponding thermodynamic parameters (ΔH, ΔS, ΔG) were calculated at different temperatures. All ΔG values were negative, which revealed that the binding processes were spontaneous. Although all CCSCPs had negative ΔH and positive ΔS, the contributions of ΔH and ΔS to ΔG values were different. When the 4'‐substituent was fluorine or chlorine, van der Waals interactions and hydrogen bonds were the main interaction forces. However, when the halogen was bromine, ionic interaction and proton transfer controlled the overall energetics. The binding distances between CCSCPs and BSA were determined using the Förster non‐radiation energy transfer theory and the effects of CCSCPs on the conformation of BSA were analyzed by synchronous fluorescence spectroscopy. Copyright © 2012 John Wiley & Sons, Ltd.     

Application of a fluorescent biosensor based‐on magneto‐γ‐Fe2O3–methyldopa nanoparticles for adsorption of human serum albumin

Understanding and controlling the interaction between the polymer methyldopa (2‐amino‐3‐(3,4‐dihydroxyphenyl)‐2‐methyl‐propanoic acid) (PMDP)–γ‐Fe₂O₃ nanoparticles and biological fluids is important if the potential of nanoparticles (NPs) in biomedicine is to be realized. Physicochemical studies on the interactions between proteins and NPs are influenced by the surface properties of the NPs. To identify the effects of the NP surface, interactions between human serum albumin (HSA) and PMDP–γ‐Fe₂O₃ NPs were investigated. Here, the adsorption of HSA onto small (10–30 nm diameter) PMDP–γ‐Fe₂O₃ NPs was quantitatively analyzed using spectroscopic methods. The fluorescence quenching data were checked for the inner‐filter effect, the main confounding factor in the observed quenching. The binding constants, K_a, were calculated at different temperatures, using a nonlinear fit to the experimental data, and the thermodynamic parameters ?H, ?S and ?G were given. The obtained thermodynamic signature suggests that hydrophobic interactions at least are present. This result indicates that the structure of the protein turns from a structureless denatured state at pH 3 into an ordered biologically active native state on addition of PMDP–γ‐Fe₂O₃ NPs. Copyright © 2015 John Wiley & Sons, Ltd.     

Purification of glutathione S‐transferase enzyme from quail liver tissue and inhibition effects of (3aR,4S,7R,7aS)‐2‐(4‐((E)‐3‐(aryl)acryloyl)phenyl)‐3a,4,7,7a‐tetrahydro‐1H‐4,7‐methanoisoindole‐1,3(2H)‐dione derivatives on the enzyme activity

The use of quail meat and eggs has made this animal important in recent years, with its low cost and high yields. Glutathione S‐transferases (GST, E.C.2.5.1.18) are an important enzyme family, which play a critical role in detoxification system. In our study, GST was purified from quail liver tissue with 47.88‐fold purification and 12.33% recovery by glutathione agarose affinity chromatography. The purity of enzyme was checked by SDS‐PAGE method and showed a single band. In addition, inhibition effects of (3aR,4S,7R,7aS)‐2‐(4‐((E)‐3‐(aryl)acryloyl)phenyl)‐3a,4,7,7a‐tetrahydro‐1H‐4,7methanoisoindole‐1,3(2H)‐dion derivatives ( 1a–g ) were investigated on the enzyme activity. The inhibition parameters (IC₅₀ and K_i values) were calculated for these compounds. IC₅₀ values of these derivatives ( 1a–e ) were found as 23.00, 15.75, 115.50, 10.00, and 28.75 μM, respectively. K_i values of these derivatives ( 1a–e ) were calculated in the range of 3.04 ± 0.50 to 131.50 ± 32.50 μM. However, for f and g compounds, the inhibition effects on the enzyme were not found.     

Combined multispectroscopic and molecular docking investigation on the interaction between delphinidin‐3‐O‐glucoside and bovine serum albumin

Anthocyanin is one of the flavonoid phytopigments with specific health benefits. The interaction between delphinidin‐3‐O‐glucoside (D3G) and bovine serum albumin (BSA) was investigated by fluorescence spectroscopy, synchronous fluorescence spectroscopy, three‐dimensional fluorescence spectroscopy, ultraviolet‐visible absorption spectroscopy, circular dichroism spectroscopy and molecular modeling. D3G effectively quenched the intrinsic fluorescence of BSA via static quenching. The number of binding sites and binding constant K_a were determined, and the hydrogen bonds and van der Waals forces played major roles in stabilizing the D3G–BSA complex. The distance r between donor and acceptor was obtained as 2.81 nm according to Förster's theory. In addition, the effects of pH and metal ions on the binding constants were discussed. The results studied by synchronous fluorescence, three‐dimensional fluorescence and circular dichroism experiments indicated that the secondary structures of the protein has been changed by the addition of D3G and the α‐helix content of BSA decreased (from 56.1% to 52.4%). Furthermore, the study of site marker competitive experiments and molecular modeling indicated that D3G could bind to site I of BSA, which was in the large hydrophobic cavity of subdomain IIA. Copyright © 2014 John Wiley & Sons, Ltd.     

Spectroscopic investigation of water‐soluble alloyed QDs with bovine serum albumin

We present here a systematic investigation on the interaction between a water‐soluble alloyed semiconductor quantum dot and bovine serum albumin using various spectroscopic techniques i.e. fluorescence quenching, resonance light scattering and synchronous fluorescence spectroscopy. The analysis of fluorescence spectrum and fluorescence intensity indicates that the intrinsic fluorescence of bovine serum albumin (BSA) gets quenched by both static and dynamic quenching mechanism. The Stern‐Volmer quenching constants, energy transfer efficiency parameters, binding parameters and corresponding thermodynamic parameters (ΔH⁰, ΔS⁰ and ΔG⁰) have been evaluated by using van 't Hoff equation at different temperatures. A positive entropy change with a positive enthalpy change was observed suggesting that the binding process was an entropy‐driven, endothermic process associated with the hydrophobic effect. The intermolecular distance (r) between donor (BSA) and acceptor (CdSeS/ZnS quantum dots) was estimated according to Förster's theory of non‐radiative energy transfer. The synchronous fluorescence spectra revealed a blue shift in the emission maxima of tryptophan which is indicative of increasing hydrophobicity. Negative ΔG⁰ values implied that the binding process was spontaneous. It was found that hydrophobic forces played a role in the quenching process. Copyright © 2016 John Wiley & Sons, Ltd.     

The luminescent properties and crystal structure of Sr(1.5‐x)‐(1.5y)Mg0.5SiO4:xEu2+,yCe3+ blue phosphor synthesized by co‐precipitation method

In order to improve the luminescent performance of silicate blue phosphors, Sr_{(1.5‐x)‐(1.5y)}Mg_0.5SiO₄:xEu²⁺,yCe³⁺ phosphors were synthesized using one‐step calcination of a precursor prepared by chemical co‐precipitation. The crystal structure and luminescent properties of the phosphors were analyzed using X‐ray diffraction and fluorescence spectrophotometry, respectively. Because the activated ions (Eu²⁺) can occupy two different types of sites (Sr₁ and Sr₂), the emission spectrum of Eu²⁺ excited at 350 nm contains two single bands (EM₁ and EM₂) in the wavelength range 400–550 nm, centered at 463 nm, and the emission intensity first increases and then decreases with increasing concentrations of Eu²⁺ ions. Co‐doping of Ce³⁺ ions can greatly enhance the emission intensity of Eu²⁺ by transferring its excitation energy to Eu²⁺. Because of concentration quenching, a higher substitution concentration of Ce³⁺ can lead to a decrease in the intensity. Meanwhile, the quantum efficiency of the phosphor is improved after doping with Ce³⁺, and a blue shift phenomenon is observed in the CIE chromaticity diagram. The results indicate that Sr_{(1.5‐x)‐(1.5y)}Mg_0.5SiO₄:xEu²⁺,yCe³⁺ can be used as a potential new blue phosphor for white light‐emitting diodes.     

Different spectroscopic and molecular modeling studies on the interaction between cyanidin‐3‐O‐glucoside and bovine serum albumin

Anthocyanin is one of the flavonoid phytopigments that shows strong antioxidant activity. The cyanidin‐3‐O‐glucoside (C3G) is one of the principal types of anthocyanins. To understand the interaction between C3G and bovine serum albumin (BSA), fluorescence spectroscopy, ultraviolet–visible absorption, Fourier transform infrared spectroscopy, circular dichroism and molecular modeling techniques were used. Binding constant (K_a) and the number of binding sites (n) were calculated. The quenching mechanism of fluorescence of BSA by C3G was discussed. The results studied by Fourier transform infrared spectroscopy and circular dichroism experiments indicate that the secondary structures of the protein have been changed by the interaction of C3G with BSA. The result of molecular modeling confirmed that the C3G bound to the site I (sub‐domain IIA) of BSA, and that the hydroxyl groups in the B ring of C3G took part in the binding with BSA. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis,photoluminescence properties and theoretical insights on 1,3‐diphenyl‐5‐(9‐anthryl)‐2‐pyrazoline and ‐1H‐pyrazole

1,3‐Diphenyl‐5‐(9‐anthryl)‐2‐pyrazoline and 1,3‐diphenyl‐5‐(9‐anthryl)‐1H‐pyrazole with an anthryl chromophore were synthesized and characterized using ¹H NMR, ¹³C NMR, FT‐IR, mass spectrometry and elemental analysis. Their optical properties were characterized by UV–vis absorption and fluorescence spectroscopy. It was observed that the absorption and fluorescence spectra of the two compounds showed a red shift with respect to that of anthracene. Pyrazole exhibited high fluorescent quantum yields (Φ_f = 0.90 in toluene) while pyrazoline showed nearly no fluorescence in solution. The significant fluorescence divergence of the two similar compounds was investigated theoretically through density functional theory (DFT) calculations. The energetically lowest‐lying state S₁ in the pyrazoline exhibited both characteristics of locally excited and electron‐transfer states that resulted in the fluorescence quenching of anthryl chromophore whereas the S₁ state in the pyrazole corresponded to an optically allowed state that led to high fluorescence quantum yields in solutions. Copyright © 2012 John Wiley & Sons, Ltd.     

Effects of the interaction between Na2Wo4‐6‐benzylaminopurine anionic chelate and rhodamine 6G on the resonance Rayleigh scattering and fluorescence spectra and their analytical applications

In pH 4.99‐6.06 Britton‐Robinson (BR) buffer medium, 6‐benzylaminopurine (6‐BA) reacted with Na₂WO₄ to form 1:1 anionic chelate (6‐BA·WO₄)^2‐, which further reacted with rhodamine 6G to form ternary ion complexes at room temperature. This resulted in a significant enhancement of resonance Rayleigh scattering (RRS) with a maximum RRS wavelength of 316 nm. Meanwhile, the fluorescence of the solution was quenched and excitation (λ_ex) and emission (λ_em) wavelengths of the fluorescence were 290 and 559 nm, respectively. Intensities of RRS enhancing (ΔI_RRS) and fluorescence quenching (ΔI_F) were directly proportional to concentrations of 6‐BA. As a result, RRS and fluorescence quenching for determination of trace amounts of 6‐BA were developed. Under optimal conditions, linear ranges and detection limits of the two methods were 0.05‐15.00 µg/mL and 8.2 ng/mL (RRS), 0.50‐15.00 µg/mL and 17.0 ng/mL, respectively. It was found that the RRS method was superior to fluorescence quenching. The influence of these methods were investigated and results showed that RRS had good selectivity. RRS was applied to determine 6‐BA in vegetable samples with satisfactory results. Furthermore, the reaction mechanisms of the ternary ion‐association system are discussed. In addition, the polarization experiment revealed that the resonance light scattering (RLS) peak of Na₂WO₄‐6‐BA‐R6G consisted mainly of depolarized resonance fluorescence and resonance scattering. It was speculated that light emission fluorescence energy (E_L) transformed into resonance light scattering energy (E_RLS), which was a key reason for enhancement of RRS. Copyright © 2012 John Wiley & Sons, Ltd.     

Fluorescence spectroscopic studies on the interaction of Gemini surfactant 14‐6‐14 with bovine serum albumin

The interaction of the cationic Gemini surfactant hexamethylene‐1,3‐bis (tetradecyldimethylammonium bromide) (14‐6‐14) with bovine serum albumin (BSA) has been investigated by fluorescence quenching spectra and three‐dimensional (3D) fluorescence spectra. The Stern–Volmer quenching constants K_SV and the corresponding thermodynamic parameters ΔH, ΔG and ΔS have been estimated by the fluorescence quenching method. The results indicated that hydrophobic forces were the predominant intermolecular forces between BSA and the surfactant. Competitive experiments and the number of binding sites calculation show that 14‐6‐14 can be inserted in site‐II (in subdomain IIIA) of BSA. The effect of 14‐6‐14 on the conformation of BSA was evaluated by synchronous fluorescence spectroscopy and 3D fluorescence spectral methods. The results show that the conformation of BSA was changed dramatically in the presence of 14‐6‐14, by binding to the Trp and Try residues of BSA. The investigation provides interaction between BSA and 14‐6‐14 as a model for molecular design and industrial research. Copyright © 2011 John Wiley & Sons, Ltd.     

Effect of solvents on photophysical properties and quenching of 2‐{[3‐(1H‐benzimidazole‐2‐yl) phenyl] carbonoimidoyl}phenol

The effect of solvents of varying polarity on the absorption and fluorescence emission of the Schiff base, 2‐{[3‐(1H‐benzimidazole‐2‐yl) phenyl]carbonoimidoyl}phenol, was studied using Lippert‐Mataga bulk polarity function, Reichardt's microscopic solvent polarity parameter and Kamlet's multiple linear regression approach. The spectral properties follow Reichardt's microscopic solvent polarity parameter better than Lippert‐Mataga bulk polarity parameter, indicating the presence of both general solute–solvent interactions and specific interactions. Catalan's multiple linear regression approach indicates the major role of solvent polarizability/dipolarity influence compared with solvent acidity or basicity. The solvatochromic effect was utilized to calculate the dipole moments of ground and excited states of the Schiff base using different methods. Bathochromic shift in the emission spectrum and the increase in dipole moment in the excited state signifies the intramolecular charge transfer character in the emitting singlet state. Fluorescence quenching by aniline was also studied in 1,4‐dioxane and n‐butanol, and the results were analyzed using sphere of action static quenching and finite sink approximation models. Copyright © 2014 John Wiley & Sons, Ltd.