Broadband Terahertz Absorption in Graphene-Embedded Photonic Crystals

The absorption in graphene is rather low at terahertz frequencies. Here, we present a graphene-embedded photonic crystal structure to realize broadband terahertz absorption in graphene. The approach provides absorption enhancement in the whole terahertz regime (from 0.1 to 10 THz). It is shown that the average absorption in the graphene-embedded photonic crystal can be enhanced in the multiple propagating bands of the photonic crystals. The absorption efficiency can be further improved by optimizing the characteristic frequency, optical thickness ratio in a unit cell, and the angle of incidence on the photonic crystals. A maximum broadband absorption factor of 28.8% was achieved for fixed alternative dielectric materials. The graphene-embedded photonic crystal is promising for terahertz functional devices with broadband response.     

A Highly Sensitive Dual-Core Photonic Crystal Fiber Based on a Surface Plasmon Resonance Biosensor with Silver-Graphene Layer

A highly sensitive dual-core photonic crystal fiber based on a surface plasmon resonance (PCF-SPR) biosensor with a silver-graphene layer is described. The silver layer with a graphene coating not only prevents oxidation of the silver layer but also can improve the silver sensing performance due to the large surface-to-volume ratio of graphene. The dual-core PCF-SPR biosensor is numerically analyzed by the finite-element method (FEM). An average spectral sensitivity of 4350 nm/refractive index unit (RIU) in the sensing range between 1.39 and 1.42 and maximum spectral sensitivity of 10,000 nm/RIU in the sensing range between 1.43 and 1.46 are obtained, corresponding to a high resolution of 1 × 10⁻⁶ RIU as a biosensor. Our analysis shows that the optical spectra of the PCF-SPR biosensor can be optimized by varying the structural parameters of the structure, suggesting promising applications in biological and biochemical detection.

     

D-Shaped Photonic Crystal Fiber–Based Surface Plasmon Resonance Biosensors with Spatially Distributed Bimetallic Layers

This paper deals with the development and analysis of D-Shaped photonic crystal fiber (PCF) biosensors using surface plasmon resonance (SPR). A thin metal layer is deposited on the outer flat surface of the PCF that behaves as the plasmonic material. Analyte is filled in the outermost peripheral region of metal layer. Finite element method (FEM) with perfectly matched layer (PML) is applied to analyze the proposed sensors. Mode analysis is performed on the proposed structures to evaluate various parameters of SPR-based PCF sensors. Three D-shaped PCF structures have been proposed with silver (Ag), gold (Au) and two-half layers of both (Ag-Au) on its flat surface. The first two structures are analyzed to the range of wavelength where the SPR will occur to facilitate understanding of the third structure. It is observed that the structures with one metal have only one sensitive plasmonic peak whereas the structure with two metal layers has two sensitive plasmonic peaks, making it suitable candidate for two-molecule sensing present in a sample analyte. Good sensitivities and resolutions are achieved for both plasmonic peaks.

     

Enhanced and Selective Photodetection Using Graphene-Stabilized Hybrid Plasmonic Silver Nanoparticles

We report the fabrication and characteristics of a novel graphene-Ag⁰ hybrid plasmonic nanostructure-based photodetector exhibiting moderately high responsivity (～28 mA/W) and spectral selectivity (～510 nm) in the visible wavelength. The formation of highly stable Ag⁰ nanoparticles with an average size of 40 nm is observed within the graphene layers, resulting in n-type doping of hybrid material. The absorption peak of graphene-Ag⁰ hybrid is redshifted to the visible wavelength (～510 nm) from the plasmonic Ag peak (～380 nm) in agreement with the optical simulation results for embedded metal nanoparticles. The study demonstrates the synergistic effect of the graphene-metal nanocomposite, which appears attractive for applications in graphene-based photonic devices.     

Narrow-band enhanced absorption of monolayer graphene at near-infrared (NIR) sandwiched by dual gratings

One possibility of enhancing light absorption in monolayer graphene at near-infrared (NIR) wavelength region with grating structures is proposed and investigated. It is demonstrated that it is possible to achieve near-perfect absorption when a single monolayer graphene is sandwiched between two gratings with optimized geometric parameters at normal incidence for transverse electric (TE) polarization. By means of the rigorous coupled-wave analysis (RCWA), the effects of technological tolerances on the optical response of the structure by varying geometric parameters and incident angle are studied. The proposed photonic structure could be efficiently exploited as a building block for innovative optical absorbers or photodetectors in combination with active materials.     

Slow light engineering for high Q high sensitivity photonic crystal microcavity biosensors in silicon

Current trends in photonic crystal microcavity biosensors in silicon-on-insulator (SOI), that focus on small and smaller sensors have faced a bottleneck trying to balance two contradictory requirements of resonance quality factor and sensitivity. By simultaneous control of the radiation loss and optical mode volumes, we show that both requirements can be satisfied simultaneously. Microcavity sensors are designed in which resonances show highest Q～9300 in the bio-ambient phosphate buffered saline (PBS) as well as highest sensitivity among photonic crystal biosensors. We experimentally demonstrated mass sensitivity 8.8atto-grams with sensitivity per unit area of 0.8pg/mm(2). Highest sensitivity, irrespective of the dissociation constant K(d), is demonstrated among all existing label-free optical biosensors in silicon at the concentration of 0.1μg/ml.     

Actively Tunable Fano Resonance in H-Like Metal-Graphene Hybrid Nanostructures

Actively tunable Fano resonance has obvious advantages in applications such as chemical or biological sensors, switches, modulators, and optical filters. In this paper, we studied theoretically the actively tunable Fano resonance in H-like metal-graphene hybrid nanostructures at visible and near-infrared wavelengths. We found that the absorption spectrum of H-like metal-graphene hybrid nanostructures has two resonance peaks, and the absorption spectrum has an obvious blue shift compared with that of the H-like metal nanostructures without graphene. The optical properties of different nanostructures are explained by the electric field distribution. Then, the dependence of the Fano resonance on the nanostructure parameters, refractive index of host materials, and graphene Fermi energy is studied. The wavelength and intensity of absorption spectrum can be manipulated by adjusting the structure parameters and host materials. In addition, the wavelength and intensity of absorption spectrum can be manipulated actively by changing the Fermi energy levels of graphene. This study provides a method for designing the actively tunable Fano resonance in H-like metal-graphene hybrid nanostructures.

     

Tunable Slow Light in Graphene Metamaterial in a Broad Terahertz Range

A graphene-based metamaterial with tunable electromagnetically induced transparency is numerically studied in this paper. The proposed structure consists of a graphene layer composed of H shape between two cut wires, by breaking symmetry can control EIT-like effects and by increasing the asymmetry in the structure has strong coupling between elements. It is important that the peak frequency of transmission window can be dynamically controlled over a broad frequency range by varying the chemical potential of graphene layer. The results show that high refractive index sensitivity and figure of merit can be achieved in asymmetrical structures which is good for sensing applications. We calculated the group delay and the results show we can control the group velocity by varying the S parameter in asymmetrical structure. The characteristics of our system indicate important potential applications in integrated optical circuits such as optical storage, ultrafast plasmonic switches, high performance filters, and slow-light devices.     

Multi-layered Graphene Silica-Based Tunable Absorber for Infrared Wavelength Based on Circuit Theory Approach

Graphene can be utilized as a tunable material for a wide range of infrared wavelength regions due to its tunable conductivity property. In this paper, we use Y-shaped silver material resonator placed over the top of multiple graphene silica-layered structures to realize the perfect absorption over the infrared wavelength region. We propose four different designs by placing the graphene sheet over silica. The absorption and reflectance performance of the structures have been explored for 1500- to 1600-nm wavelength range. The proposed design also explores the absorption tunability of the structure for the different values of graphene chemical potential. We have reported the negative impedance for the perfect absorption for proposed metamaterial absorber structures. All the metamaterial absorbers have reported 99% of its absorption peaks in the infrared wavelength region. These designs can be used as a tunable absorber for narrowband and wideband applications. The proposed designs will become the basic building block of large photonics design which will be applicable for polariser, sensor, and solar applications.

     

Staked Graphene for Tunable Terahertz Absorber with Customized Bandwidth

Terahertz (THz) absorber with dynamically tunable bandwidth possesses huge application value in the fields of switches, sensors, and THz detection. However, the perfect absorbers based on photonic crystals and metamaterials are not intelligent enough to capture the electromagnetic wave in a tunable way. In this paper, we utilized only patterned graphene to tune the absorption positions and the bandwidth in the terahertz regime. More distinguished than some dynamic absorbers proposed before, the performances with peak frequency relative tuning range of 68 % and nearly unity absorbance are obtained by a single cross-shaped graphene layer. Additionally, the working bandwidth can be broadened with stacked structured graphene. The almost perfect absorption shifted from 2.36～3.2 to 3.26～3.99 THz continuously via changing the chemical potential of graphene.     

Tuning Plasmonic Near-Perfect Absorber for Selective Absorption Applications

In this study, we present a high-performance tunable plasmonic absorber based on metal-insulator-metal nanostructures. High absorption is supported over a wide range of wavelengths, which is retained well at a very wide range of incident angles too. The coupling process occurs with high absorption efficiency of ∼ 99% by tuning the thickness of the dielectric layer. In addition, a complex trapezoidal nanostructure based on simple metal-insulator-metal structures by stacking different widths of Cu strip-nanostructures in the vertical direction has been put forward to enhance light absorption based on selective absorption. A trapezoidal sample has been designed with a solar absorption as high as 95% at wavelengths ranging from 300 nm to 2000 nm for different operating temperatures. Furthermore, the optical absorber has a very simple geometric structure and is easy to integrate into complex photonic devices. Perfect absorption and easy fabrication of the metal-insulator-metal structure make it an attractive device in numerous photonic applications.

     

Plasmon-Enhanced Optical Transmission at Multiple Wavelengths Through an Asymmetric Corrugated Thin Silver Film

Micro- and nanometallic structures that exhibit extraordinary optical transmission (EOT) have attracted much attention for their potential applications in photonic devices. However, most existing reports have only discussed EOT at one specific wavelength, which limits its use in multi-wavelength applications. Here, we experimentally demonstrate EOT at multiple wavelengths through an asymmetric corrugated thin silver film due to simultaneous excitation of multiple plasmonic resonances at both interfaces. A unique method that applies single-pulse nanosecond laser interference lithography is introduced to produce the silver grating, which shows high quality over large area. At oblique incidence, each EOT peak is observed to split into two peaks oppositely shifted towards higher and lower frequencies. At some specific angles of incidence, overlap of these shifted peaks gives rise to distorted transmission spectra. Our method may find applications involving multiple wavelengths such as multi-wavelength bandpass filters, anti-Stokes Raman scattering spectroscopy, enhanced four-wave mixing, and so on.     

Structure-based model for light-harvesting properties of nucleic acid nanostructures

Programmed self-assembly of DNA enables the rational design of megadalton-scale macromolecular assemblies with sub-nanometer scale precision. These assemblies can be programmed to serve as structural scaffolds for secondary chromophore molecules with light-harvesting properties. Like in natural systems, the local and global spatial organization of these synthetic scaffolded chromophore systems plays a crucial role in their emergent excitonic and optical properties. Previously, we introduced a computational model to predict the large-scale 3D solution structure and flexibility of nucleic acid nanostructures programmed using the principle of scaffolded DNA origami. Here, we use Förster resonance energy transfer theory to simulate the temporal dynamics of dye excitation and energy transfer accounting both for overall DNA nanostructure architecture as well as atomic-level DNA and dye chemical structure and composition. Results are used to calculate emergent optical properties including effective absorption cross-section, absorption and emission spectra and total power transferred to a biomimetic reaction center in an existing seven-helix double stranded DNA-based antenna. This structure-based computational framework enables the efficient in silico evaluation of nucleic acid nanostructures for diverse light-harvesting and photonic applications.     

Tunable and Multichannel Terahertz Perfect Absorber Due to Tamm Plasmons with Topological Insulators

In this paper, Tamm plasmons with topological insulators in a composite structure consisting of Bi₂Se₃, spacer layer, and one-dimensional photonic crystal (1DPC) have been demonstrated theoretically. The perfect absorption has been realized in the terahertz regime because of the optical Tamm states (OTSs) excited at the interface between Bi₂Se₃ and 1DPC. The perfect absorption can be realized for both TE and TM waves, and it is noted that the perfect absorption can be obtained at any incident angle by simultaneously changing the wavelength of incident light for TE-polarizations. Moreover, the perfect absorption can be realized at different wavelengths with the change of the chemical potential and the thickness of Bi₂Se₃. The thickness and the dielectric constant of the spacer layer will also play a vital role in the performance of the perfect absorber. Especially, the multichannel perfect absorption phenomenon can be achieved by choosing the appropriate thickness of the spacer layer. This tunable and multichannel terahertz perfect absorber has great application potential in the solar energy, photodetection, and THz biosensor.

     

Optical Channel Drop Filter Design Based on PCRR and Micro Cavity Resonator

Optical channel drop filter (OCDF) plays a key role in optical communication networks for filtering the individual wavelength among the group of channels in wavelength division multiplexing systems. There are several channel drop filters with different design mechanisms available in the literature, but those structure dimensions are not compact enough for the photonic integrated applications. Hence, in this paper, a compact and efficient OCDF is developed in the triangular lattice PC structure based on diamond-shaped photonic crystal ring resonator (PCRR) mechanism combined with micro cavity resonator (MCR). The developed OCDF is analysed for different operating wavelengths by considering the different positions of MCR around the main PCRR. Based upon the position of the MCR around PCRR, the three dropping wavelengths such as 1540 nm, 1550 nm, and 1570 nm are observed at the output waveguides with 100% dropping efficiency. Then the structural and performance parameter comparison is done between the proposed and existing structures in terms of device dimension, dropping efficiency, and quality factor. It is depicted through the results that the quality factor and the device dimension are better than that of the existing structures for 1550-nm wavelength.

     

Selective Absorption of Photonic Crystal with Graphene

Plasmonics - Selective absorption of photonic crystal with graphene is studied. The Photonic Crystal at THz regime with permittivity 4.2 is designed and validated with rigorous coupled-wave...     

Wide-Angle Near-Perfect Absorber Based on Sub-Wavelength Dielectric Grating Covered by Continuous Thin Aluminum Film

We design and numerically investigate an optical absorber consisting of the sub-wavelength dielectric grating covered by continuous thin aluminum film. In this absorber, the aluminum film act as an efficient absorbing material because of the enhanced electric field in the air nano-grooves, and the absorption spect+rum can be manipulated by Fabry-Perot cavity mode resonance. According to the spectrum manipulation mechanism, the wavelength of absorption peak can be tuned by changing the heights and widths of the air nano-grooves. More importantly, the high absorption is very robust to the incident angle around the designed wavelength. From the nanofabrication point of view, the light absorber can be fabricated more easily without the need for ion or electrochemical etching of metal and it is easy to be integrated into complex photonic devices.     

Improving Solar Cells’ Light Trapping by the Low Loss Interface Photonic Crystals

Improving the silicon layer’s optical absorption is a key research point for crystalline silicon based thin film solar cells. Light trapping is a method widely adopted to achieve this research purpose. In this paper, we propose low loss interface photonic crystals layer (IPC), which is sandwiched between the crystalline silicon layer and the cover layer. The low loss interface photonic crystals layer could boost the light trapping efficiency significantly. The mechanism is that the smaller refraction index difference between silicon layer and the low loss interface photonic crystals layer could reduce the light’s interface reflection. Taking advantage of the coupling calculation by optical and electrical simulations, solar cell’s absorption efficiency and electrical performance parameters are obtained. Compared with optimized reference group, the maximum output power of the proposed solar cell could be improved by 6.44%. The result indicates that the proposed low loss interface photonic crystals layer is applicable for light’s trapping in crystalline silicon thin film solar cells.

     

Graphene Hybrid Surface Plasmon Waveguide with Low Loss Transmission

In this paper, a novel graphene hybrid surface plasmon waveguide structure is designed. Based on the finite element method, the mode characteristics, the quality factor, and the gain threshold of the waveguide structure are analyzed. The results show that the optical field constraint of the designed waveguide can reach a better level of deep sub-wavelength under the optimal parameters of 1550-nm working wavelength. The structure is applied to a laser, and the high quality factor, the low energy loss, the low threshold limit, and the ultra-small effective mode field area are obtained by adjusting waveguide design parameters. Compared with the common waveguide structure, this structure has stronger optical field limiting ability and microcavity binding ability. It provides theoretical and technical support for the development of new high-efficiency nano-laser devices and is expected to be applied to fields such as on-chip interconnects, photonic integrated circuits, optical storage, and optical signal processing.

     

A new helicase assay based on graphene oxide for anti-viral drug development

Recently, graphene oxide (GO), one of the carbon nanomaterials, has received much attention due to its unique physical and chemical properties and high potential in many research areas, including applications as a biosensor and drug delivery vehicle. Various GO-based biosensors have been developed, largely based on its surface adsorption properties for detecting biomolecules, such as nucleotides and peptides, and real-time monitoring of enzymatic reactions. In this review, we discuss recent advances in GO-based biosensors focusing on a novel assay platform for helicase activity, which was also employed in high-throughput screening to discover selective helicase inhibitors.